Objective:To explore the application of a role transition shock model based on the teach-back technique in knee arthroplasty nursing teaching.Methods:We assigned 50 nursing student interns practicing in the knee arthroplasty team of Orthopedics Department of Nanjing First Hospital between August 2020 and August 2022 into control group ( n=25, traditional teaching) and observation group ( n=25, teach-back-based role transition shock model teaching) according to the order of admission. At the end of internship, the examination scores, the impact of transition shock on comprehensive abilities, and teaching satisfaction of the students were assessed and analyzed using the t test and Fisher's exact test with the use of SPSS 22.0. Results:Compared with the control group, the observation group scored significantly lower in the physical, psychological, knowledge and skills, and sociocultural and developmental dimensions of the transition shock assessment scale ( P<0.05). The observation group showed significantly higher scores of nurse-patient communication, nursing practice, disease observation, health education, humanistic care, team cooperation, clinical thinking, and emergency response than the control group ( P<0.05). The examination results of the observation group were significantly better than those of the control group ( t=12.31, 11.52, P<0.001). The teaching satisfaction rate of the observation group was significantly higher than that of the control group [100.00% (25/25) vs. 68.00% (17/25), χ2=9.52, P=0.002]. Conclusions:The teach-back-based role transition shock model can help alleviate the transition impact faced by nursing student interns when entering clinical practice, and also improve their comprehensive abilities as well as satisfaction with teaching.

Polymer self-healing is mainly based on the molecular structure and interaction of polymers, and some need external stimulation, such as light, heat, pH, etc. In recent years, many studies have found that the self-healing properties of polymers can prolong the life of materials, while maintaining the mechanical properties of polymers after healing. According to the different action modes of polymer materials, it can be divided into autonomous self-healing and non-autonomous self-healing. Among them, autonomous self-healing mainly works through reversible covalent bonds (Schiff base bond, Diels-Alder reaction, hydrazide bond), reversible non-covalent bonds (hydrogen bond, metal-ligand coordination bond, electrostatic interaction, π-π stacking interaction, hydrophobic interaction) and a combination of the two interactions. Drug carriers with unique self-healing properties play an important role in the encapsulation and stable release of biomacromolecules. In this review, the self-healing mechanism of polymers and their applications in the field of biomedicine were briefly summarized and discussed.

Biological matrix reference material is a reference material that combines the target material with the biological matrix. The biological matrix reference material has higher consistency with the authentic specimens in forensic toxicology, and its application has a positive effect on improving the accuracy of test results. This paper reviews the research on the matrix reference materials corresponding to three common biological test materials (blood, urine and hair). In order to provide reference for the development and application of biological matrix reference materials in forensic toxicology, this paper mainly introduces the research progress of preparation technology of biological matrix reference materials and some existing products and their parameters evaluation.
Forensic Toxicology/methods* ; Hair ; Body Fluids

Objective:To describe the baseline characteristics of the subjects enrolled in the China Quantitative CT (QCT) big data program in 2018—2019.Methods:Based on baseline data from the Chinese health big data project from January 2018 to December 2019 from the eligible enrolled population, measurements of bone mineral density (BMD) and visceral adipose tissue (VAT) were performed using Mindways′ QCT Pro Model 4 system. The baseline data of age, gender, regional distribution, height, weight, abdominal circumference, blood pressure, blood routine and blood biochemical tests were analyzed. And the single factor analysis of variance (ANOVA) was used to check the age related trend of BMD and VAT in both genders.Results:After screening the inclusion exclusion criteria and outliers of the main indicators, 86 113 people were enrolled in the project. The enrollment rate was 92.47%, including 35 431 (41.1%) women and 50 682 (58.9%) men, and the ratio of men to women was 1.43. The mean age was (50.3±12.7) years in all the subjects, and it was (50.2±12.8) years and (50.4±12.5) years in men and women, respectively, and there was no statistical difference between the two genders ( P>0.05). Total of 43 833 people were enrolled in east China, it was the largest group by region (50.90%), it was followed by central China (16 434 people, 19.08%), and the number of people enrolled in Northeast China was the lowest (2 914 people, 3.38%). The rate of completing of health information indicators related to the main outcome of the study were all above 70%, and there were significant differences between men and women (all P<0.05). The mean BMD was (139.33±46.76) mg/cm 3 in women, (135.90±36.48) mg/cm 3 in men, which showed a decreasing trend with age in both gender (both P<0.001); the mean intra-abdominal fat area was (116.39±56.23) cm 2 in women, (191.67±77.07) cm 2 in men, and there was an increasing trend with age in both men and women (both P<0.001). Conclusions:There are gender differences in BMD and VAT measured by QCT with different age tendency, and there are gender differences in health information index. Regional factors should also be taken into account for regional differences in the inclusion of data.

Objective:To investigate the normal reference values of spinal bone mineral density measured by quantitative computed tomography (QCT) and the differences of bone mineral density (BMD) in different regions of in Chinese adult males.Methods:Men who underwent low-dose CT lung scan for cancer screening in regions of Northeast, North, East, South, Central and Southwest of China from January 2018 to December 2019 were selected. And the lumbar vertebrae BMD values in the male subjects were measured by the QCT system (Mindways Software, Inc.). The mean BMD values and their decline rates were calculated at an age interval of 10 years, and the prevalence of osteoporosis was calculated according to the American College of Radiology spine QCT osteoporosis diagnostic criteria.Results:A total of 50 682 males with a mean age of (50.22±12.79) years (ranged 20 to 98 years) were included in this study. The peak BMD of (173.11±28.56) mg/cm 3 in the healthy Chinese adult male population appeared in the age group of 20 to 29 years and then declined with age. Before the age of 70 years, the BMD was relatively higher in males in South China, and it was lower in Central China and Southwest China, and it was intermediate in Northeast, North and East of China, with statistically significant differences. There was no significant differences in BMD in the males in the two age groups of 70 to 79 years and 80 and older among the regions in China. The overall decline rate of spinal BMD in Chinese males under QCT was about 46.92% over the lifetime, and it declined obviouslyin the 40-49 age group. The overall prevalence of osteoporosis in Chinese male population aged 50 years and above was approximately 11.42%, with the highest prevalence in Southwest China and Central China (14.72% and 13.87%, respectively) and the lowest in North China and South China (8.53% and 7.71%, respectively). Conclusions:A reference of lumbar spine BMD values for healthy males in China based on QCT is established. BMD values were highest in South China and Lowest in Central China.

Objective:To establish the normal reference value of lumbar bone mineral density (BMD) under quantitative CT (QCT) in Chinese healthy adult females and to explore the regional differences.Methods:Total of 35 431 healthy women who met the inclusion criteria of Chinese health quantitative CT big data program were selected in this study. The BMD of the central plane of L 1 and L 2 vertebrae was measured by Mindways′s QCT system, and the mean value was taken. One-way analysis of variance was used to compare the BMD differences of lumbar vertebrae in women of different ages and regions. The subjects were grouped by an age interval of 10 years, and the level of BMD in different regions of the same age group were compaired. Results:The peak BMD of Chinese healthy adult women appeared in the age group of 20-29 years (Northeast China(183.01±24.58) mg/cm 3, North China (188.93±24.80) mg/cm 3, East China (187.54±27.71) mg/cm 3, South China (186.22±33.72) mg/cm 3, Central China (176.33±24.91) mg/cm 3, Southwest China(182.25±28.00) mg/cm 3), and then it decreased with age. The level of BMD in different regions decreased with the age. Before the age of 70 years, BMD in Central and Southwest China was always at a low level((176.23±24.91) to (90.38±28.12) mg/cm 3, 182.25±28.00 to (88.55±25.68) mg/cm 3), lower than those in Northeast China ((183.01±24.58) to (99.69±27.85) mg/cm 3), North China ((188.93±24.80) to (95.89±26.12) mg/cm 3), East China ((187.54±27.71) to (95.65±27.86) mg/cm 3). After 70 years of age, BMD tended to be the same in different regions ( P>0.05). The BMD values in Central China and Southwest China were similar in the age group of 40-60 years ( P>0.05). The BMD values in the health adult femles in the age group of 60 years in different regions of Chinawere all lower than those of bone mass abnormality (all P<0.05). The detection rate of osteoporosis in females over 50 years was the highest in Southwest China (25.65%) and it was the lowest in North China (17.30%). Conclusions:This study establishes reference values of BMD under QCT in healthy Chinese women, which can be used as a reference basis for identifying women with low BMD who are at risk of osteoporosis. The BMD value is the lowest in Southwest China and the highest in South China.

Objective:To use quantitative computed tomography (QCT) technology to measure the bone mineral density of the spine of the Chinese healthy population, and to explore its correlation with hemoglobin and serum albumin.Methods:The data in this study came from the China Health Quantitative CT Big Data Project (China Biobank). The spine bone density was measured by using QCT Pro Image Analysis System and all cooperating centers used the European spine phantom (NO.145) for quality control. Total of 50 053 healthy persons who met the criteria for entry were selected as the research subjects. The subjects were divided into 7 groups according to age. The general data, spine bone density, serum albumin, hemoglobin of the subjects were collected. The single-factor analysis of variance, Pearson correlation analysis and multi-classification logistic regression model were applied to analyze the correlation between bone density and hemoglobin and serum albumin.Results:The bone mineral density of healthy people decreased with age ( P<0.05), and there were significant differences in hemoglobin, serum albumin and body mass index (BMI) among different age groups (all P<0.05). Linear correlation analysis showed that there were positive correlation between bone mineral density and hemoglobin in healthy males in different age groups ( r=0.086, 0.101, 0.076, 0.090, 0.072, 0.123, 0.100, all P<0.01). There were negative correlation between bone mineral density and hemoglobin in certain age groups in women (40-49 years group: r=-0.027; 70-79 yearsgroup: r=-0.077; both P<0.05). And corelation were found between bone mineral density and serum levels of albumin in certain age groups of healthy subjects (among men, 30-39 years group: r=-0.048; 40-49 years group, r=-0.027; 70-79 years group, r=-0.051; among women, 30-39 years group: r=-0.044; 40-49 years group, r=-0.042; 50-59 years group, r=-0.086; 70-79 years group, r=-0.070; all P<0.05). After adjusting for age and BMI, the multi-category logistic regression analysis showed that the hemoglobin level was protective factor of normal bone density ( OR=1.022, 95% CI:1.017-1.027) and decreased bone density ( OR=1.012, 95% CI:1.007-1.016) in healthy males, and the serum albumin was risk factor for normal bone density ( OR=0.926, 95% CI:0.905-0.948) and decreased bone density ( OR=1.006, 95% CI:0.951-1.011) in healthy women. Conclusion:There is a correlation between bone mineral density and hemoglobin and serum albumin in Chinese healthy population. Hemoglobin is a protective factor for bone mineral density in men, and serum albumin is a risk factor for bone mineral densityin women.

OBJECTIVE: To predict the trends for fine-scale spread of Oncomelania hupensis based on supervised machine learning models in Shanghai Municipality, so as to provide insights into precision O. hupensis snail control. METHODS: Based on 2016 O. hupensis snail survey data in Shanghai Municipality and climatic, geographical, vegetation and socioeconomic data relating to O. hupensis snail distribution, seven supervised machine learning models were created to predict the risk of snail spread in Shanghai, including decision tree, random forest, generalized boosted model, support vector machine, naive Bayes, k-nearest neighbor and C5.0. The performance of seven models for predicting snail spread was evaluated with the area under the receiver operating characteristic curve (AUC), F1-score and accuracy, and optimal models were selected to identify the environmental variables affecting snail spread and predict the areas at risk of snail spread in Shanghai Municipality. RESULTS: Seven supervised machine learning models were successfully created to predict the risk of snail spread in Shanghai Municipality, and random forest (AUC = 0.901, F1-score = 0.840, ACC = 0.797) and generalized boosted model (AUC= 0.889, F1-score = 0.869, ACC = 0.835) showed higher predictive performance than other models. Random forest analysis showed that the three most important climatic variables contributing to snail spread in Shanghai included aridity (11.87%), ≥ 0 °C annual accumulated temperature (10.19%), moisture index (10.18%) and average annual precipitation (9.86%), the two most important vegetation variables included the vegetation index of the first quarter (8.30%) and vegetation index of the second quarter (7.69%). Snails were more likely to spread at aridity of < 0.87, ≥ 0 °C annual accumulated temperature of 5 550 to 5 675 °C, moisture index of > 39% and average annual precipitation of > 1 180 mm, and with the vegetation index of the first quarter of > 0.4 and the vegetation index of the first quarter of > 0.6. According to the water resource developments and township administrative maps, the areas at risk of snail spread were mainly predicted in 10 townships/subdistricts, covering the Xipian, Dongpian and Tainan sections of southern Shanghai. CONCLUSIONS Supervised machine learning models are effective to predict the risk of fine-scale O. hupensis snail spread and identify the environmental determinants relating to snail spread. The areas at risk of O. hupensis snail spread are mainly located in southwestern Songjiang District, northwestern Jinshan District and southeastern Qingpu District of Shanghai Municipality.
Animals ; Bayes Theorem ; China/epidemiology* ; Ecosystem ; Gastropoda ; Supervised Machine Learning

Under the dual pressure of emerging zoonoses and the difficulty in eliminating conventional zoonoses, many uncertainties in global control of infectious diseases are challenging the achievement of sustainable development goals set by the United Nations General Assembly. One Health, developed on the basis of understanding the relationship between human diseases and animal diseases, is conducive to the prevention and control of zoonoses. The connotation of “One Health” is mainly explained by three aspects, namely the systems thinking mode of “unity of environment and man”, the practice guidance of “multi-sectoral concert” and the economic evaluation strategy of “cost-effectiveness analysis”. One Health approach has been successfully applied in the control of major infectious diseases in China, such as schistosomiasis, leading to remarkable achievements; however, there are still multiple challenges. This review proposes that much attention should be paid to top-level design, the difference between emerging zoonoses and conventional zoonoses, and the dynamic process of One Health governance during the development and application of One Health.

OBJECTIVE: To compare the applicability of two risk assessment methods for occupational health risk assessment in enterprises with 1-bromopropane(1-BP) production and utilization. METHODS: Three enterprises with 1-BP production and utilization were selected as the research subjects by a typical sampling method. The exposure concentration of time-weighted average of 1-BP-exposed in worker was detected. The non-carcinogenic health risk of 1-BP was assessed using the USA Environmental Protection Agency(EPA) inhalation risk(EPA assessment model) and the Ministry of Manpower of Singapore(MOM assessment model), and the results were compared. RESULTS: When the EPA method was used for the assessment, the risk assessment results of the four posts in the manufacturing enterprises were all negligible. In the enterprises that use 1-BP, the posts of cleaning machine B and clamping were of medium risk and the other four posts were of low risk based on the occupational exposure limit(OEL) in China used as the reference exposure concentration(RfC). When the 24-hour minimal risk level of USA Agency for Toxic Substances and Disease Registry was used as the RfC, the posts of cleaning machine B and clamping were of extreme high risk; the posts in cleaning machine A and checking were of high risk; the post in the cleaning machine D was of medium risk and the post of cleaning machine C was of low risk. When the MOM assessment model was used for evaluation, the four posts were of low risk in the 1-BP production enterprises. In the enterprises that use 1-BP, the posts of cleaning machine B and clamping were of high risk; the posts of cleaning machine A, cleaning machine D and checking were of medium risk; and the post of cleaning machine C was of low risk. CONCLUSION: When the OEL value is used for risk assessment, the MOM assessment method is more suitable than the EPA assessment method to assess occupational health risks of 1-BP.