ObjectiveTo investigate the noise level and influencing factors in metro platforms and station halls， thereby providing the scientific basis for the establishment of hygienic standards. MethodsDuring the morning peak（7：00‒9：30）and off-peak （9：30‒17：00） on weekdays， the noise levels were measured with noise meters at 39 monitoring points of 13 station platforms and 31 monitoring points of 6 station halls. The monitoring points arrangement and detection methods referred to the Examination methods for public places—Part 1： physical parameters（GB/T 18204.1‒2013）. ResultsThe measured noise level in the station ranged from 69.25 to 86.17 dB（A）， accounting for 44.74% below 75 dB（A）， 89.47% below 80 dB（A） and 97.37% below 85 dB（A）.The noise level of the platform ［（76.38±4.19） dB（A）］ was higher than that of the station hall ［（74.24±4.50） dB（A）］（P<0.01）. The noise level of the elevated platforms ［（80.01±2.25） dB（A）］ was higher than that of the underground platforms ［（75.73±4.13） dB（A）］（P<0.01）， and the noise level of the platforms without platform screen doors（PSD） ［（80.21±5.08） dB（A）］ was higher than that of platforms with PSD［（74.73±3.16） dB（A）］ （P<0.01）. No statistical significant differences were observed among the different areas of the platforms， monitoring periods， platform depth， exit mode and operation years （P>0.05）. ConclusionThe noise level in metro stations in the city does not fully meet the requirements of current relevant standards. It is suggested to take noise reduction measures to reduce the noise of metro stations.

Molecular imprinting is a biomimetic technique that simulates the specific recognition of biological macromolecules such as antibody. Based on molecular imprinting and high-specificity affinity analysis,the biomimetic imprinting affinity analysis (BIA) possesses many advantages such as high sensitivity,strong tolerance,good specificity and low cost,and thus,it has shown excellent prospects in food safety detection,pharmaceutical analysis and environmental pollution monitoring. In this review,the construction methods of recognition interfaces for BIA were summarized,including bulk polymerization,electro-polymerization and surface molecular imprinting. The application of molecularly imprinted polymers in different analysis methods,such as radiolabeled affinity analysis,enzyme-labeled affinity analysis,fluorescence-labeled affinity analysis,chemiluminescence affinity analysis and electrochemical immunosensor was mainly discussed. Furthermore,the challenges and future development trends of BIA in practical application were elucidated. This review might provide new reference ideas and technical supports for the further development of BIA technique.

Objective:To understand the epidemiological characteristics of human respiratory syncytial virus (HRSV) among acute respiratory infection (ARI) cases in 16 provinces of China from 2009 to 2023.Methods:The data of this study were collected from the ARI surveillance data from 16 provinces in China from 2009 to 2023, with a total of 28 278 ARI cases included in the study. The clinical specimens from ARI cases were screened for HRSV nucleic acid from 2009 to 2023, and differences in virus detection rates among cases of different age groups, regions, and months were analyzed.Results:A total of 28 278 ARI cases were enrolled from January 2009 to September 2023. The age of the cases ranged from<1 month to 112 years, and the age M ( Q1, Q3) was 3 years (1 year, 9 years). Among them, 3 062 cases were positive for HRSV nucleic acid, with a total detection rate of 10.83%. From 2009 to 2019, the detection rate of HRSV was 9.33%, and the virus was mainly prevalent in winter and spring. During the Corona Virus Disease 2019 (COVID-19) pandemic, the detection rate of HRSV fluctuated between 6.32% and 18.67%. There was no traditional winter epidemic peak of HRSV from the end of 2022 to the beginning of 2023, and an anti-seasonal epidemic of HRSV occurred from April to May 2023. About 87.95% (2 693/3 062) of positive cases were children under 5 years old, and the difference in the detection rate of HRSV among different age groups was statistically significant ( P<0.001), showing a decreasing trend of HRSV detection rate with the increase of age ( P<0.001). Among them, the HRSV detection rate (25.69%) was highest in children under 6 months. Compared with 2009-2019, the ranking of HRSV detection rates in different age groups changed from high to low between 2020 and 2023, with the age M (Q1, Q3) of HRSV positive cases increasing from 1 year (6 months, 3 years) to 2 years (11 months, 3 years). Conclusion:Through 15 years of continuous HRSV surveillance analysis, children under 5 years old, especially infants under 6 months old, are the main high-risk population for HRSV infection. During the COVID-19 pandemic, the prevalence and patterns of HRSV in China have changed.

Objective:In chronic hepatitis B (CHB) patients with previous 96-week treatment with tenofovir amibufenamide (TMF) or tenofovir disoproxil fumarate (TDF), we investigated the safety profile of sequential TMF treatment from 96 to 144 weeks.Methods:Enrolled subjects that previously assigned (2:1) to receive either 25 mg TMF or 300 mg TDF with matching placebo for 96 weeks received extending or switching TMF treatment for 48 weeks. Safety profiles of kidney, bone, metabolism, body weight, and others were evaluated.Results:666 subjects from the initial TMF group and 336 subjects from TDF group with at least one dose of assigned treatment were included at week 144. The overall safety profile was favorable in each group and generally similar between extended or switched TMF treatments from week 96 to 144. In subjects switching from TDF to TMF, the non-indexed estimated glomerular filtration rate (by non-indexed CKD-EPI formula) and creatinine clearance (by Cockcroft-Gault formula) were both increased, which were (2.31±8.33) ml/min and (4.24±13.94) ml/min, respectively. These changes were also higher than those in subjects with extending TMF treatment [(0.91±8.06) ml/min and (1.30±13.94) ml/min]. Meanwhile, switching to TMF also led to an increase of the bone mineral density (BMD) by 0.75% in hip and 1.41% in spine. On the other side, a slight change in TC/HDL ratio by 0.16 (IQR: 0.00, 0.43) and an increase in body mass index (BMI) by (0.54±0.98) kg/m 2 were oberved with patients switched to TMF, which were significantly higher than that in TMF group. Conclusion:CHB patients receiving 144 weeks of TMF treatment showed favorable safety profile. After switching to TMF, the bone and renal safety was significantly improved in TDF group, though experienceing change in metabolic parameters and weight gain (NCT03903796).

Traumatic supraorbital fissure syndrome (TSOFS) is a symptom complex caused by nerve entrapment in the supraorbital fissure after skull base trauma. If the compressed cranial nerve in the supraorbital fissure is not decompressed surgically, ptosis, diplopia and eye movement disorder may exist for a long time and seriously affect the patients′ quality of life. Since its overall incidence is not high, it is not familiarized with the majority of neurosurgeons and some TSOFS may be complicated with skull base vascular injury. If the supraorbital fissure surgery is performed without treatment of vascular injury, it may cause massive hemorrhage, and disability and even life-threatening in severe cases. At present, there is no consensus or guideline on the diagnosis and treatment of TSOFS that can be referred to both domestically and internationally. To improve the understanding of TSOFS among clinical physicians and establish standardized diagnosis and treatment plans, the Skull Base Trauma Group of the Neurorepair Professional Committee of the Chinese Medical Doctor Association, Neurotrauma Group of the Neurosurgery Branch of the Chinese Medical Association, Neurotrauma Group of the Traumatology Branch of the Chinese Medical Association, and Editorial Committee of Chinese Journal of Trauma organized relevant experts to formulate Chinese expert consensus on the diagnosis and treatment of traumatic supraorbital fissure syndrome ( version 2024) based on evidence of evidence-based medicine and clinical experience of diagnosis and treatment. This consensus puts forward 12 recommendations on the diagnosis, classification, treatment, efficacy evaluation and follow-up of TSOFS, aiming to provide references for neurosurgeons from hospitals of all levels to standardize the diagnosis and treatment of TSOFS.

Patients with severe trauma require an extremely timely treatment and transfusion plays an irreplaceable role in the emergency treatment of such patients. An increasing number of evidence-based medicinal evidences and clinical practices suggest that patients with severe traumatic bleeding benefit from early transfusion of low-titer group O whole blood or hemostatic resuscitation with red blood cells, plasma and platelet of a balanced ratio. However, the current domestic mode of blood supply cannot fully meet the requirements of timely and effective blood transfusion for emergency treatment of patients with severe trauma in clinical practice. In order to solve the key problems in blood supply and blood transfusion strategies for emergency treatment of severe trauma, Branch of Clinical Transfusion Medicine of Chinese Medical Association, Group for Trauma Emergency Care and Multiple Injuries of Trauma Branch of Chinese Medical Association, Young Scholar Group of Disaster Medicine Branch of Chinese Medical Association organized domestic experts of blood transfusion medicine and trauma treatment to jointly formulate Chinese expert consensus on blood support mode and blood transfusion strategies for emergency treatment of severe trauma patients ( version 2024). Based on the evidence-based medical evidence and Delphi method of expert consultation and voting, 10 recommendations were put forward from two aspects of blood support mode and transfusion strategies, aiming to provide a reference for transfusion resuscitation in the emergency treatment of severe trauma and further improve the success rate of treatment of patients with severe trauma.

Objective:To understand the epidemiological characteristics of human respiratory syncytial virus (HRSV) among acute respiratory infection (ARI) cases in 16 provinces of China from 2009 to 2023.Methods:The data of this study were collected from the ARI surveillance data from 16 provinces in China from 2009 to 2023, with a total of 28 278 ARI cases included in the study. The clinical specimens from ARI cases were screened for HRSV nucleic acid from 2009 to 2023, and differences in virus detection rates among cases of different age groups, regions, and months were analyzed.Results:A total of 28 278 ARI cases were enrolled from January 2009 to September 2023. The age of the cases ranged from<1 month to 112 years, and the age M ( Q1, Q3) was 3 years (1 year, 9 years). Among them, 3 062 cases were positive for HRSV nucleic acid, with a total detection rate of 10.83%. From 2009 to 2019, the detection rate of HRSV was 9.33%, and the virus was mainly prevalent in winter and spring. During the Corona Virus Disease 2019 (COVID-19) pandemic, the detection rate of HRSV fluctuated between 6.32% and 18.67%. There was no traditional winter epidemic peak of HRSV from the end of 2022 to the beginning of 2023, and an anti-seasonal epidemic of HRSV occurred from April to May 2023. About 87.95% (2 693/3 062) of positive cases were children under 5 years old, and the difference in the detection rate of HRSV among different age groups was statistically significant ( P<0.001), showing a decreasing trend of HRSV detection rate with the increase of age ( P<0.001). Among them, the HRSV detection rate (25.69%) was highest in children under 6 months. Compared with 2009-2019, the ranking of HRSV detection rates in different age groups changed from high to low between 2020 and 2023, with the age M (Q1, Q3) of HRSV positive cases increasing from 1 year (6 months, 3 years) to 2 years (11 months, 3 years). Conclusion:Through 15 years of continuous HRSV surveillance analysis, children under 5 years old, especially infants under 6 months old, are the main high-risk population for HRSV infection. During the COVID-19 pandemic, the prevalence and patterns of HRSV in China have changed.

Objective:To investigate the diagnostic value of serum ferritin in intestinal failure-associated liver disease. Methods:Clinical data of adult patients with short bowel syndrome admitted to the Department of General Surgery of Jinling Hospital affiliated to Nanjing University from January 2019 to December 2022 were retrospectively analyzed to determine the correlation between serum ferritin and liver enzyme profiles by linear regression,to screen the potential risk factors of liver injury by multifactorial Logistic regression analysis,and to establish a prediction model for liver fibrosis. The area under the curve was also calculated to assess the accuracy of the model. Results:A total of 106 patients with short bowel syndrome were included,of whom 55 (51.9％) had elevated serum ferritin (SF). Linear regression analysis showed a positive correlation between serum ferritin and ALT (r=0.427,P<0.001),ALP (r=0.365,P<0.001),and γ-GT (r=0.423,P<0.001),and one-way Logistic regression analysis showed that the higher the level of serum ferritin,the more pronounced the difference was (SF>ULN) The one-way logistic regression analysis showed that the higher the serum ferritin level,the more significant the difference was[SF>ULN (upper limit of normal value of serum ferritin),P=0.033;SF>1.5×ULN,P=0.018;SF>2.5×ULN,P=0.006]. Multifactorial logistic regression analysis showed that PN dependence (OR=3.366,P=0.017) and serum ferritin>2.5 ULN (OR=3.292,P=0.014)were independent risk factors for intestinal failure-associated liver disease-liver fibrosis,and the receiver operating curve (ROC) of the subjects showed area under the curve of 74.8％,95％ CI:0.652～0.844. Conclusion:Serum ferritin can be used as a reliable clinical biomarker to help identify intestinal failure-associated liver disease.

Objective To develop a portable medical oxygen purity analyzer capable of real-time detection of multi-compo-nent gases in medical oxygen or aviation oxygen to ensure the safety of oxygen consumption.Methods The portable medical oxygen purity analyzer with STM3F103RC as the main controller involved in a management module,an oxygen detection module,a carbon monoxide/chlorine detection module,a flow/carbon dioxide detection module and a dew point detection module as its hardware components,which had its human-machine interface programmed with DGUS supervision,control and data acquisition(SCADA)software and system program developed with C language under Keil MDK environment.The performance verification of the analyzer developed was carried out in terms of oxygen detection error and stability and errors for measuring carbon monoxide,chlorine and carbon dioxide.Results The analyzer showed high precision when used to detect oxygen with high volume fraction,with long-term stability and the absolute error restrained within±0.1％;the erros for measuring carbon monoxide,chlorine and carbon dioxide were all limited within±5％FS to meet the desired requirements.Condusion The portable medical oxygen purity analyzer developed with high precision,stability and portability can be used for detection of medical oxygen and aviation oxygen.[Chinese Medical Equipment Journal,2024,45(3):36-40]

Objective To develop a biological safety protection third-level(BSL-3)laboratory based on folding-modular shelters to solve the problems of the existing laboratories in space and function expansion,large-scale deployment and low-cost transportation.Methods The BSL-3 laboratory was composed of a folding combined shelter module,a ventilation and purification module,a power supply and distribution module,a monitoring and communication module,a control system module and an equipment module.The folding combined shelter module used a leveling base frame as the foundation and a lightweight panel as the enclosure mechanism,and was divided into an auxiliary area and a protection protected area;the ventilation and purification module was made up of an air supply unit and an air exhaust unit,the air supply unit was integrated with a fresh-air air conditioner and the exhaust unit was equipped with a main fan,a standby fan and a bag in/bag out filter;the control system module adopted a supervision mode of decentralized control and centralized management,which executed communication with the data server as the center and Profinet protocol and MODBUS-TCP.Results The BSL-3 laboratory proved to meet the requirements of relevant standards in internal microenvironment,airflow direction,airtightness,working condition and disinfection effect.Conclusion The BSL-3 laboratory is compatible with large-scale transport and deployment and facilitates reliable and safe experiments for epidemic prevention and control and cross-regional support.[Chinese Medical Equipment Journal,2024,45(3):41-46]