Purpose: . This study evaluated the accuracy of implant impression techniques using scan healing abutments compared to conventional techniques. Materials and methods: . A mandibular model with implants at #34, 36, and 46 was used. Experiments were conducted for single implant and 3-unit bridge scenarios. Groups were as follows: Group IOS - Scan healing abutments were scanned with an intraoral scanner. Group Imp - Scan healing abutments were used, and impressions were taken with silicone material, followed by model scanning. Group Sb - Scan bodies were scanned with an intraoral scanner. Group Trans - Impressions were taken with transfer copings, and models were scanned. Each group was scanned 10 times, and deviations in central distance and angulation of analogs were measured. Statistical analyses were performed using ANOVA and post-hoc tests at a 95% confidence level. Results: . For single implants, there were no significant differences in distance deviation (P > .05). Angular deviation values were: IOS (0.24 ± 0.10°), Imp (0.19 ± 0.06°), Sb (0.38 ± 0.05°), and Trans (0.29 ± 0.06°), with Sb showing significantly larger values than IOS and Imp (P < .05). For bridges, distance deviation did not significantly differ (P > .05). Angular deviations were: IOS (0.21 ± 0.08°), Imp (0.21 ± 0.09°), Sb (0.25 ± 0.10°), and Trans (0.46 ± 0.19°), with Trans showing significantly larger values than the others (P < .05). Conclusion . Scan healing abutment techniques showed similar accuracy to traditional methods. They could be a viable alternative for single implant crowns or short-span fixed dental prostheses.

Purpose: . This study evaluated the accuracy of implant impression techniques using scan healing abutments compared to conventional techniques. Materials and methods: . A mandibular model with implants at #34, 36, and 46 was used. Experiments were conducted for single implant and 3-unit bridge scenarios. Groups were as follows: Group IOS - Scan healing abutments were scanned with an intraoral scanner. Group Imp - Scan healing abutments were used, and impressions were taken with silicone material, followed by model scanning. Group Sb - Scan bodies were scanned with an intraoral scanner. Group Trans - Impressions were taken with transfer copings, and models were scanned. Each group was scanned 10 times, and deviations in central distance and angulation of analogs were measured. Statistical analyses were performed using ANOVA and post-hoc tests at a 95% confidence level. Results: . For single implants, there were no significant differences in distance deviation (P > .05). Angular deviation values were: IOS (0.24 ± 0.10°), Imp (0.19 ± 0.06°), Sb (0.38 ± 0.05°), and Trans (0.29 ± 0.06°), with Sb showing significantly larger values than IOS and Imp (P < .05). For bridges, distance deviation did not significantly differ (P > .05). Angular deviations were: IOS (0.21 ± 0.08°), Imp (0.21 ± 0.09°), Sb (0.25 ± 0.10°), and Trans (0.46 ± 0.19°), with Trans showing significantly larger values than the others (P < .05). Conclusion . Scan healing abutment techniques showed similar accuracy to traditional methods. They could be a viable alternative for single implant crowns or short-span fixed dental prostheses.

Oxidative stress due to hyperglycemia damages the functions of retinal pigment epithelial (RPE) cells and is a major risk factor for diabetic retinopathy (DR). Paeoniflorin is a monoterpenoid glycoside found in the roots of Paeonia lactiflora Pall and has been reported to have a variety of health benefits. However, the mechanisms underlying its therapeutic effects on high glucose (HG)-induced oxidative damage in RPE cells are not fully understood. In this study, we investigated the protective effect of paeoniflorin against HG-induced oxidative damage in cultured human RPE ARPE-19 cells, an in vitro model of hyperglycemia. Pretreatment with paeoniflorin markedly reduced HG-induced cytotoxicity and DNA damage. Paeoniflorin inhibited HG-induced apoptosis by suppressing activation of the caspase cascade, and this suppression was associated with the blockade of cytochrome c release to cytoplasm by maintaining mitochondrial membrane stability. In addition, paeoniflorin suppressed the HG-induced production of reactive oxygen species (ROS), increased the phosphorylation of nuclear factor erythroid 2-related factor 2 (Nrf2), a key redox regulator, and the expression of its downstream factor heme oxygenase-1 (HO-1). On the other hand, zinc protoporphyrin (ZnPP), an inhibitor of HO-1, abolished the protective effect of paeoniflorin against ROS production in HG-treated cells. Furthermore, ZnPP reversed the protective effects of paeoniflorin against HG-induced cellular damage and induced mitochondrial damage, DNA injury, and apoptosis in paeoniflorin-treated cells. These results suggest that paeoniflorin protects RPE cells from HG-mediated oxidative stress-induced cytotoxicity by activating Nrf2/HO-1 signaling and highlight the potential therapeutic use of paeoniflorin to improve the symptoms of DR.

Purpose: . This study evaluated the accuracy of implant impression techniques using scan healing abutments compared to conventional techniques. Materials and methods: . A mandibular model with implants at #34, 36, and 46 was used. Experiments were conducted for single implant and 3-unit bridge scenarios. Groups were as follows: Group IOS - Scan healing abutments were scanned with an intraoral scanner. Group Imp - Scan healing abutments were used, and impressions were taken with silicone material, followed by model scanning. Group Sb - Scan bodies were scanned with an intraoral scanner. Group Trans - Impressions were taken with transfer copings, and models were scanned. Each group was scanned 10 times, and deviations in central distance and angulation of analogs were measured. Statistical analyses were performed using ANOVA and post-hoc tests at a 95% confidence level. Results: . For single implants, there were no significant differences in distance deviation (P > .05). Angular deviation values were: IOS (0.24 ± 0.10°), Imp (0.19 ± 0.06°), Sb (0.38 ± 0.05°), and Trans (0.29 ± 0.06°), with Sb showing significantly larger values than IOS and Imp (P < .05). For bridges, distance deviation did not significantly differ (P > .05). Angular deviations were: IOS (0.21 ± 0.08°), Imp (0.21 ± 0.09°), Sb (0.25 ± 0.10°), and Trans (0.46 ± 0.19°), with Trans showing significantly larger values than the others (P < .05). Conclusion . Scan healing abutment techniques showed similar accuracy to traditional methods. They could be a viable alternative for single implant crowns or short-span fixed dental prostheses.

Purpose: . This study evaluated the accuracy of implant impression techniques using scan healing abutments compared to conventional techniques. Materials and methods: . A mandibular model with implants at #34, 36, and 46 was used. Experiments were conducted for single implant and 3-unit bridge scenarios. Groups were as follows: Group IOS - Scan healing abutments were scanned with an intraoral scanner. Group Imp - Scan healing abutments were used, and impressions were taken with silicone material, followed by model scanning. Group Sb - Scan bodies were scanned with an intraoral scanner. Group Trans - Impressions were taken with transfer copings, and models were scanned. Each group was scanned 10 times, and deviations in central distance and angulation of analogs were measured. Statistical analyses were performed using ANOVA and post-hoc tests at a 95% confidence level. Results: . For single implants, there were no significant differences in distance deviation (P > .05). Angular deviation values were: IOS (0.24 ± 0.10°), Imp (0.19 ± 0.06°), Sb (0.38 ± 0.05°), and Trans (0.29 ± 0.06°), with Sb showing significantly larger values than IOS and Imp (P < .05). For bridges, distance deviation did not significantly differ (P > .05). Angular deviations were: IOS (0.21 ± 0.08°), Imp (0.21 ± 0.09°), Sb (0.25 ± 0.10°), and Trans (0.46 ± 0.19°), with Trans showing significantly larger values than the others (P < .05). Conclusion . Scan healing abutment techniques showed similar accuracy to traditional methods. They could be a viable alternative for single implant crowns or short-span fixed dental prostheses.

Oxidative stress due to hyperglycemia damages the functions of retinal pigment epithelial (RPE) cells and is a major risk factor for diabetic retinopathy (DR). Paeoniflorin is a monoterpenoid glycoside found in the roots of Paeonia lactiflora Pall and has been reported to have a variety of health benefits. However, the mechanisms underlying its therapeutic effects on high glucose (HG)-induced oxidative damage in RPE cells are not fully understood. In this study, we investigated the protective effect of paeoniflorin against HG-induced oxidative damage in cultured human RPE ARPE-19 cells, an in vitro model of hyperglycemia. Pretreatment with paeoniflorin markedly reduced HG-induced cytotoxicity and DNA damage. Paeoniflorin inhibited HG-induced apoptosis by suppressing activation of the caspase cascade, and this suppression was associated with the blockade of cytochrome c release to cytoplasm by maintaining mitochondrial membrane stability. In addition, paeoniflorin suppressed the HG-induced production of reactive oxygen species (ROS), increased the phosphorylation of nuclear factor erythroid 2-related factor 2 (Nrf2), a key redox regulator, and the expression of its downstream factor heme oxygenase-1 (HO-1). On the other hand, zinc protoporphyrin (ZnPP), an inhibitor of HO-1, abolished the protective effect of paeoniflorin against ROS production in HG-treated cells. Furthermore, ZnPP reversed the protective effects of paeoniflorin against HG-induced cellular damage and induced mitochondrial damage, DNA injury, and apoptosis in paeoniflorin-treated cells. These results suggest that paeoniflorin protects RPE cells from HG-mediated oxidative stress-induced cytotoxicity by activating Nrf2/HO-1 signaling and highlight the potential therapeutic use of paeoniflorin to improve the symptoms of DR.

Oxidative stress due to hyperglycemia damages the functions of retinal pigment epithelial (RPE) cells and is a major risk factor for diabetic retinopathy (DR). Paeoniflorin is a monoterpenoid glycoside found in the roots of Paeonia lactiflora Pall and has been reported to have a variety of health benefits. However, the mechanisms underlying its therapeutic effects on high glucose (HG)-induced oxidative damage in RPE cells are not fully understood. In this study, we investigated the protective effect of paeoniflorin against HG-induced oxidative damage in cultured human RPE ARPE-19 cells, an in vitro model of hyperglycemia. Pretreatment with paeoniflorin markedly reduced HG-induced cytotoxicity and DNA damage. Paeoniflorin inhibited HG-induced apoptosis by suppressing activation of the caspase cascade, and this suppression was associated with the blockade of cytochrome c release to cytoplasm by maintaining mitochondrial membrane stability. In addition, paeoniflorin suppressed the HG-induced production of reactive oxygen species (ROS), increased the phosphorylation of nuclear factor erythroid 2-related factor 2 (Nrf2), a key redox regulator, and the expression of its downstream factor heme oxygenase-1 (HO-1). On the other hand, zinc protoporphyrin (ZnPP), an inhibitor of HO-1, abolished the protective effect of paeoniflorin against ROS production in HG-treated cells. Furthermore, ZnPP reversed the protective effects of paeoniflorin against HG-induced cellular damage and induced mitochondrial damage, DNA injury, and apoptosis in paeoniflorin-treated cells. These results suggest that paeoniflorin protects RPE cells from HG-mediated oxidative stress-induced cytotoxicity by activating Nrf2/HO-1 signaling and highlight the potential therapeutic use of paeoniflorin to improve the symptoms of DR.

Purpose: . This study evaluated the accuracy of implant impression techniques using scan healing abutments compared to conventional techniques. Materials and methods: . A mandibular model with implants at #34, 36, and 46 was used. Experiments were conducted for single implant and 3-unit bridge scenarios. Groups were as follows: Group IOS - Scan healing abutments were scanned with an intraoral scanner. Group Imp - Scan healing abutments were used, and impressions were taken with silicone material, followed by model scanning. Group Sb - Scan bodies were scanned with an intraoral scanner. Group Trans - Impressions were taken with transfer copings, and models were scanned. Each group was scanned 10 times, and deviations in central distance and angulation of analogs were measured. Statistical analyses were performed using ANOVA and post-hoc tests at a 95% confidence level. Results: . For single implants, there were no significant differences in distance deviation (P > .05). Angular deviation values were: IOS (0.24 ± 0.10°), Imp (0.19 ± 0.06°), Sb (0.38 ± 0.05°), and Trans (0.29 ± 0.06°), with Sb showing significantly larger values than IOS and Imp (P < .05). For bridges, distance deviation did not significantly differ (P > .05). Angular deviations were: IOS (0.21 ± 0.08°), Imp (0.21 ± 0.09°), Sb (0.25 ± 0.10°), and Trans (0.46 ± 0.19°), with Trans showing significantly larger values than the others (P < .05). Conclusion . Scan healing abutment techniques showed similar accuracy to traditional methods. They could be a viable alternative for single implant crowns or short-span fixed dental prostheses.

In fixed prosthodontic treatment of the maxillary anterior region, where high esthetics are required, it is crucial not only to achieve a successful prosthesis but also to form symmetrical and natural gingiva. To achieve esthetic gingiva, it is necessary to adjust the subgingival contour of the temporary prosthesis or to modify the base of pontic. However, during the transition from temporary to definitive prosthesis, the conventional method of removing the temporary prosthesis and taking an impression after gingival retraction often fails to accurately reproduce the gingival profile. In such cases, the gingiva is arbitrarily trimmed on the model to fabricate the definitive prosthesis, which reduces the predictability of esthetic treatment outcomes. This case report introduces methods to transfer the subgingival contour and the pontic base formed with the temporary prosthesis to the final model and definitive prosthesis through two cases.

Advancements in CAD-CAM technology have allowed for a variety of options in implant-supported fixed prosthesis restorations for completely edentulous patients. For patients with severe alveolar bone resorption, zirconia prosthetic restorations that include the gingival portion, such as implant-supported hybrid dentures, are possible, as well as monolithic zirconia prosthetic restorations in the form of crowns. The integration of digital technology in fixed prosthetic restoration using implants enables predictable treatment through diagnosis and virtual surgery by integrating the patient’s clinical and radiological information. In this case, the utilization of digital software allowed for the establishment of implants in appropriate positions, considering both the remaining alveolar bone and the final prosthesis. By designing both the maxillary removable prosthesis and the mandibular fixed prosthesis simultaneously in CAD software, bilateral balanced occlusion could be easily achieved. Furthermore, maintaining the initial interocclusal relationship from provisional restorations to final prostheses allowed for convenient transition while ensuring functional and aesthetic satisfaction.