Objective: To investigate the characteristics of public health emergencies in Jinhua City, Zhejiang Province from 2014 to 2023, so as to provide the reference for prevention and control of public health emergencies. Methods: Data of public health emergencies and related information in Jinhua City from 2014 to 2023 were collected through Emergency Public Reporting System of Chinese Disease Prevention and Control Information System. Attack rates, and distribution of time, areas and places were descriptively analyzed. Results: A total of 276 public health emergencies were reported in Jinhua City from 2014 to 2023. There were 10 324 reported cases and 7 deaths, with an attack rate of 0.32%. There were 53 Ⅳ-level (19.20%) and 223 unclassified public health emergencies (80.80%). Infectious disease emergencies were predominant types, accounting for 97.83% (270 events). The three most common infectious disease emergencies were other infectious diarrhea (42.03%), influenza (21.01%) and COVID-19 (16.30%). The reported public health emergencies peaked in November and December, with 66 and 45 events reported, respectively. The three most counties (cities, districts) included Yiwu City, Wucheng District and Lanxi City, accounting for 24.28% (67 events), 18.48% (51 events) and 11.96% (33 events), respectively. School and preschool institutions were predominant places where public health emergencies occurred (198 events, 71.74%). Conclusions The public health emergencies in Jinhua City from 2014 to 2023 were Ⅳ-level and unclassified emergencies, and infectious disease emergencies were predominant. November and December were the peak reporting periods, and schools and preschool institutions were the main places where these events occurred.

Background/Aims: Metabolic dysfunction-associated steatohepatitis (MASH) is a significant risk factor for gallstone formation, but mechanisms underlying MASH-related gallstone formation remain unclear. Golgi membrane protein 1 (GOLM1) participates in hepatic cholesterol metabolism and is upregulated in MASH. Here, we aimed to explore the role of GOLM1 in MASH-related gallstone formation. Methods: The UK Biobank cohort was used for etiological analysis. GOLM1 knockout (GOLM1-/-) and wild-type (WT) mice were fed with a high-fat diet (HFD). Livers were excised for histology and immunohistochemistry analysis. Gallbladders were collected to calculate incidence of cholesterol gallstones (CGSs). Biles were collected for biliary lipid analysis. HepG2 cells were used to explore underlying mechanisms. Human liver samples were used for clinical validation. Results: MASH patients had a greater risk of cholelithiasis. All HFD-fed mice developed MASH, and the incidence of gallstones was 16.7% and 75.0% in GOLM1-/- and WT mice, respectively. GOLM1-/- decreased biliary cholesterol concentration and output. In vivo and in vitro assays confirmed that GOLM1 facilitated cholesterol efflux through upregulating ATP binding cassette transporter subfamily G member 5 (ABCG5). Mechanistically, GOLM1 translocated into nucleus to promote osteopontin (OPN) transcription, thus stimulating ABCG5-mediated cholesterol efflux. Moreover, GOLM1 was upregulated by interleukin-1β (IL-1β) in a dose-dependent manner. Finally, we confirmed that IL-1β, GOLM1, OPN, and ABCG5 were enhanced in livers of MASH patients with CGSs. Conclusions In MASH livers, upregulation of GOLM1 by IL-1β increases ABCG5-mediated cholesterol efflux in an OPN-dependent manner, promoting CGS formation. GOLM1 has the potential to be a molecular hub interconnecting MASH and CGSs.

Background/Aims: Metabolic dysfunction-associated steatohepatitis (MASH) is a significant risk factor for gallstone formation, but mechanisms underlying MASH-related gallstone formation remain unclear. Golgi membrane protein 1 (GOLM1) participates in hepatic cholesterol metabolism and is upregulated in MASH. Here, we aimed to explore the role of GOLM1 in MASH-related gallstone formation. Methods: The UK Biobank cohort was used for etiological analysis. GOLM1 knockout (GOLM1-/-) and wild-type (WT) mice were fed with a high-fat diet (HFD). Livers were excised for histology and immunohistochemistry analysis. Gallbladders were collected to calculate incidence of cholesterol gallstones (CGSs). Biles were collected for biliary lipid analysis. HepG2 cells were used to explore underlying mechanisms. Human liver samples were used for clinical validation. Results: MASH patients had a greater risk of cholelithiasis. All HFD-fed mice developed MASH, and the incidence of gallstones was 16.7% and 75.0% in GOLM1-/- and WT mice, respectively. GOLM1-/- decreased biliary cholesterol concentration and output. In vivo and in vitro assays confirmed that GOLM1 facilitated cholesterol efflux through upregulating ATP binding cassette transporter subfamily G member 5 (ABCG5). Mechanistically, GOLM1 translocated into nucleus to promote osteopontin (OPN) transcription, thus stimulating ABCG5-mediated cholesterol efflux. Moreover, GOLM1 was upregulated by interleukin-1β (IL-1β) in a dose-dependent manner. Finally, we confirmed that IL-1β, GOLM1, OPN, and ABCG5 were enhanced in livers of MASH patients with CGSs. Conclusions In MASH livers, upregulation of GOLM1 by IL-1β increases ABCG5-mediated cholesterol efflux in an OPN-dependent manner, promoting CGS formation. GOLM1 has the potential to be a molecular hub interconnecting MASH and CGSs.

Background/Aims: Metabolic dysfunction-associated steatohepatitis (MASH) is a significant risk factor for gallstone formation, but mechanisms underlying MASH-related gallstone formation remain unclear. Golgi membrane protein 1 (GOLM1) participates in hepatic cholesterol metabolism and is upregulated in MASH. Here, we aimed to explore the role of GOLM1 in MASH-related gallstone formation. Methods: The UK Biobank cohort was used for etiological analysis. GOLM1 knockout (GOLM1-/-) and wild-type (WT) mice were fed with a high-fat diet (HFD). Livers were excised for histology and immunohistochemistry analysis. Gallbladders were collected to calculate incidence of cholesterol gallstones (CGSs). Biles were collected for biliary lipid analysis. HepG2 cells were used to explore underlying mechanisms. Human liver samples were used for clinical validation. Results: MASH patients had a greater risk of cholelithiasis. All HFD-fed mice developed MASH, and the incidence of gallstones was 16.7% and 75.0% in GOLM1-/- and WT mice, respectively. GOLM1-/- decreased biliary cholesterol concentration and output. In vivo and in vitro assays confirmed that GOLM1 facilitated cholesterol efflux through upregulating ATP binding cassette transporter subfamily G member 5 (ABCG5). Mechanistically, GOLM1 translocated into nucleus to promote osteopontin (OPN) transcription, thus stimulating ABCG5-mediated cholesterol efflux. Moreover, GOLM1 was upregulated by interleukin-1β (IL-1β) in a dose-dependent manner. Finally, we confirmed that IL-1β, GOLM1, OPN, and ABCG5 were enhanced in livers of MASH patients with CGSs. Conclusions In MASH livers, upregulation of GOLM1 by IL-1β increases ABCG5-mediated cholesterol efflux in an OPN-dependent manner, promoting CGS formation. GOLM1 has the potential to be a molecular hub interconnecting MASH and CGSs.

Objective: To explore the safety and feasibility of the disconnection of the left renal artery preferentially during robot-assisted inferior vena cava (IVC) thrombectomy for patients with left renal cell carcinoma and tumor emboli. Methods: Clinical data of 7 patients who underwent robot-assisted IVC thrombectomy and radical nephrectomy in the First Affiliated Hospital of Zhengzhou University during Dec.2021 and Oct.2024 were retrospectively analyzed.Thrombectomy was performed first，followed by nephrectomy. The “IVC-first, kidney-last”robotic technique was developed to minimize chances of IVC thrombus. When patients in left lateral decubitus position, the left renal artery was severed from the right side through the inferior vena cava and abdominal aorta. After removal of thrombus from IVC was completed, patients changed to the right lateral position to complete radical left nephrectomy. Results: Imaging examinations revealed that the median diameter of the renal cell carcinomas was 83(46-99) mm; the median length of the inferior vena cava cancerous emboli was 49(2-91) mm.According to the Mayo classification，the cancerous emboli were gradeⅠ in 2 cases，gradeⅡ in 4 cases，and grade Ⅲ in 1 case.All surgeries were successful.The median operation time was 248(201-331) minutes，blood loss 500(200-1000) mL，and 6 cases required intraoperative blood transfusion.The median time for transition into the intensive care unit was 1(1-4) days，and drainage tube removal 6(5-12) days.Serum creatinine increased significantly in 5 cases，4 of which returned to normal after 1 week，but 1 had renal insufficiency (creatinine 166 μmol/L).Chylous fistula occurred in 1 patient，and lower extremity venous thrombosis developed in 3 patients.Pathological examinations indicated 6 cases of renal cell carcinoma and 1 case of MiT family translocation renal cell carcinoma.During the median follow-up of 17(1-35) months，5 cases were tumor-free，while 2 had lung and retroperitoneal metastases.They received targeted therapy of axitinib combined immunotheraphy and lived with tumors. Conclusion: In the left lateral position for left renal cell carcinoma with cancerous emboli，robot-assisted laparoscopic thrombectomy by crossing the inferior vena cava and abdominal aorta and disconnecting the left renal artery first is safe and feasible.

Objective To investigate the factors influencing international normalized ratio (INR)>3.0 in patients undergoing warfarin anticoagulation therapy after mechanical heart valve replacement. Methods A retrospective analysis was performed on the clinical data of patients who underwent mechanical heart valve replacement surgery and received warfarin anticoagulation therapy at West China Hospital of Sichuan University from January 1, 2011 to June 30, 2022. Based on the discharge INR values, patients were divided into two groups: an INR≤3.0 group and an INR>3.0 group. The factors associated with INR>3.0 at the time of discharge were analyzed. Results A total of 8901 patients were enrolled, including 3409 males and 5492 females, with a median age of 49.3 (43.5, 55.6) years. The gender, body mass index (BMI), New York Heart Association (NYHA) cardiac function grading, INR, glutamic oxaloacetic transaminase, and preoperative prothrombin time (PT) were statistically different between the two groups (P<0.05). Multivariate logistic regression analysis revealed that lower BMI, preoperative PT>15 s, and mitral valve replacement were independent risk factors for INR>3.0 at discharge (P<0.05). Conclusion BMI, preoperative PT, and surgical site are factors influencing INR>3.0 at discharge in patients undergoing warfarin anticoagulation therapy after mechanical heart valve replacement. Special attention should be given to patients with lower BMI, longer preoperative PT, and mitral valve replacement to avoid excessive anticoagulation therapy.

ObjectiveTo explore the impacts of material type and loading volume of rigid containers on the hydrogen peroxide low temperature plasma sterilization of thoracoscopic instruments, to identify the best rigid containers and loading volume of thoracoscopic instruments. MethodsThoracoscopic instruments sterilized by STERRAD^® 100NX hydrogen peroxide low temperature plasma in Shanghai Pulmonary Hospital affiliated to Tongji University from August to September 2024 were selected as the research items. According to the material of rigid containers, the instruments were divided into polyethylene case group (A), stainless steel case group (B) and silicone resin case group (C). In terms of the loading volume, the rigid containers were divided into (loading capacity <80%) groups of 8, 10 and 12 instruments. The results of physical monitoring, the first type of chemical indicator card monitoring, and the five types of card luminal chemical process challenge device (PCD) monitoring of the 9 groups of A8, A10, A12, B8, B10, B12, C8, C10 and C12 were compared and evaluated. ResultsCompared to A8, A10 A12, C8, C10 or C12 groups, the thoracoscope instruments in the stainless steel containers in B8, B10 or B12 group had higher hydrogen peroxide concentrations and shorter elapsed time in the pressure check phases 1 and phases 2, with the differences statistically significant (P<0.05), followed by the silicone resin case group and the polyethylene case group. The nine groups of physical parameter monitoring, the first type of chemical indicator monitoring, and the five types of chemical PCD monitoring for lumen sterilization achieved 100% qualification rates, and there were no significant differences in the qualified rates of sterilization among the 9 groups (P>0.05). ConclusionWhen using hydrogen peroxide low temperature plasma to sterilize thoracoscopic instruments, it is recommended to use stainless steel or silicone resin rigid containers with a controlled loading capacity (≤12) to ensure optimal sterilization quality.

Objective:To construct 3D-bioprinted organoid artificial skin derived from adult stem cells and investigate their effects on repair of skin defect in mice.Methods:The cell suspension mixture was prepared with human skin keratinocytes, fibroblasts and vascular endothelial cells with a ratio of 2∶1∶1 and cultured in ultra-low attachment plates, and morphological changes of cell spheres were observed with an inverted phase contrast microscope. After 7 days of culture, cell spheres were collected and immunofluorescence staining was performed to characterize the expression and structural distribution of the epidermis, dermis and blood vessels. The artificial skin composed of skin organoids were printed through 3D printing and morphology of printed artificial skin and dressing was observed. Ten immunodeficient balb/c female mice were divided into hydrogel group and organoid group, with 5 mice in each group with the method of random number table. The full-thickness skin defect model with a diameter of 1 cm was established in all mice, and the wound was covered with the hydrogel dressings in hydrogel group and with 3D-printed skin organoids of the same size in organoid group. Wound healing and healing rate of the two groups were observed at 0, 4, 8, 12 and 16 days after modeling. At 16 days after modeling, HE staining was performed on wound skin samples to observe the epidermal keratosis and dermal epidermal junction of the wound surface and Masson staining to observe the density of collagen fibers and dermal fiber thickness of the wound surface.Results:(1) The cell suspension mixture of keratinocytes, fibroblasts and vascular endothelial cells could self-aggregate into cell spheres in the ultra-low attachment plates, and it was observed with the inverted phase contrast microscope that the volume of cell spheres gradually increased with the extension of culture time. (2) Immunofluorescence staining of the cell spheres showed that epidermal markers such as keratin (K)1, K10, and K14 were expressed in the outer layer of the cell spheres, and dermal markers such as vimentin (VIM) and vascular markers CD31 were expressed in the core, which indicated the epidermis was located in the outer layer of the sphere, and the dermis and blood vessels were located in the core of the sphere, with the same structural characteristics of the skin organoids. (3) The 3D-printed organoid artificial skin and hydrogel dressing were round and transparent, with a diameter of 10 mm and a thickness of 1 mm. (4) As shown in the general observation of the wound surface, the wound area of both groups decreased with the extension of treatment time. The wound of the organoid group healed faster, which showed obvious epithelization at 4 days after modeling and basic wound healing at 16 days after modeling. At 0 day after modeling, there was no obvious difference in the appearance of wound surface between the two groups. At 4 and 8 days after modeling, the wound healing rates were (31.7±1.0)% and (52.4±5.4)% in the organoid group, and (24.3±6.8)% and (45.4±7.0)% in the hydrogel group ( P>0.05). At 12 and 16 days after modeling, the wound healing rates were (78.6±8.0)% and (91.1±5.6)% in the organoid group, and were (58.5±5.4)% and (71.9±7.8)% in the hydrogel group ( P<0.01). (5) HE staining showed that in the organoid group epidermal keratinization was found better, with the epidermis being more intact and well attached to the dermis. Epidermal keratinization was not complete in hydrogel group and the epidermis and dermis were obviously separated. Masson staining showed the formation of collagen fiber structures in the wound surface of both groups, which were blue and reticular. The collagen fiber structure was more compact and the dermal fiber thickness was smaller in the organoid group, while the collagen fiber structure was loose and the dermal fiber thickness was greater in the hydrogel group. Conclusions:Adult stem cells of skin can successfully form skin organoids in 3D culture conditions and organoid artificial skin can be constructed with 3D bioprinting technology. Compared with hydrogel dressing, 3D-bioprinted organoid artificial skin can significantly improve the healing rate in mice, with better epidermal keratinization and closer attachment of the epidermis to the dermis. Moreover, the collagen fiber structure of the wound is more compact, with smaller dermal fiber in thickness.

Large skin defect caused by severe trauma is a common clinical problem with high incidence, great harm, difficult treatment and poor prognosis, which not only seriously affects the quality of patients′ life, but also threatens their lives. Large skin defects are difficult to heal by themselves and the main treatment is skin transplantation. However, the source of the autologous flap is limited and may cause secondary damage to patients. The artificial skin has poor mechanical integrity that cannot be integrated, causing formation of scars, and also has the risk of immune rejection. Skin organoid technology can extremely simulate the human skin tissue and its functions. Thus, it can overcome the shortcomings of the current skin wound treatment to a certain extent and provide a new treatment for the patients with large skin defects. At present, the construction methods of skin organoids are relatively mature, but each method has its advantages and disadvantages, and the best method has not been determined yet. Moreover, the structure and function of skin organoids are relatively simple, so there is still a relatively big gap between skin organoids and real human skin. Hence, the authors reviewed the research progress in skin organoid construction strategies from organoids′ skin organoid technology, and construction methods of skin organoids, hoping to provide a reference for the construction of skin organoids with more complex structures and functions in the future.

AIM To determine the contents of aspartic acid,glutamic acid,serine,glycine,threonine,citrulline,arginine,alanine,γ-amino-butyric acid,tyrosine,valine,phenlalanine,isoleucine,ornithine,leucine,lysine and proline in Gualoupi Injection and its intermediates,and to analyze their change laws.METHODS The OPA-FMOC online derivatization analysis was performed on a 45℃ thermostatic Waters XBridge C18 column(4.6 mm×100 mm,3.5 μm),with the mobile phase comprising of phosphate buffer solution-[methanol-acetonitrile-water(45 : 45 : 10)]flowing at 1 mL/min in a gradient elution manner,and the detection wavelengths were set at 262,338 nm.Principal component analysis and heatmap analysis were adopted in chemical pattern recognition for the corresponding intermediates in ten processes of six batches of samples.RESULTS Seventeen amino acids showed good linear relationships within their own ranges(R2>0.998 0),whose average recoveries were 83.4％-119.5％with the RSDs of 0.91％-7.94％.Different batches of samples in the same process were clustered,and the corresponding intermediates in different processed were clustered into three groups.Alcohol precipitation and cation exchange column demonstrated the biggest influences on amino acid composition.CONCLUSION This experiment can provide important references for the critical factors on quality control of Gualoupi Injection,thus ensure the stability and uniformity of final product.