Objective To analyze the occupational health literacy (OHL) level and its influencing factors of workers in non-metallic mineral product industry in Yunfu City. Methods A total of 947 frontline workers from 24 non-metallic mineral products enterprises in Yunfu City were selected as the research subjects using the stratified random sampling method. The OHL level of the workers were assessed using the Occupational Health Literacy Questionnaire of National Key Populations. Results The overall OHL level of the research subjects was 58.3% (552/947). The OHL levels across four dimensions, from highest to lowest, were basic knowledge of occupational health protection (94.7%), healthy work practices and behaviors (81.8%), legal knowledge of occupational health (65.5%), and basic skills of occupational health protection (25.9%). The results of binary logistic regression analysis showed that workers with 2.0-<10.0 years and ≥10 years of work experience had higher OHL levels than those with <2.0 years of work experience (all P<0.01). Workers with a high school education or above had higher OHL levels than those with a junior high school education or below (all P<0.01). Workers in large- and medium-sized enterprises had higher OHL levels than those in small and micro-sized enterprises (both P<0.01). Conclusion The OHL levels of workers in Yunfu City's non-metallic mineral products industry can be further improved, particularly the occupational health protection skills and related legal knowledge. Workers with short seniority, low educational level, and in small and micro enterprises should be the key groups for improving OHL levels.

BACKGROUND:With social progress,the incidence rate of knee osteoarthritis is getting higher and higher in the face of the rapidly developing aging problem in the social population,and the number of total knee replacement operations is gradually increasing. OBJECTIVE:To study the relationship between prosthesis size and stress shielding by improving the tibial prosthesis base. METHODS:A female patient with severe knee osteoarthritis was selected.Based on Mimics,through extracting the bone structure of the knee joint and simulating the total knee replacement surgery,osteotomy,positioning,and implantation operations were carried out to establish the geometric modeling of the total knee replacement prosthesis(including the femoral prosthesis,tibial bracket,and tibial pad),and improve the design of the tibial prosthesis base,analyze the effect of different tibial prosthesis bases on stress shielding of surrounding bone tissue. RESULTS AND CONCLUSION:(1)Compared with single-stem tibial intramedullary stem prosthesis,the design of four-post tibial intramedullary stem prosthesis created a certain degree of stress shielding around the short stem.However,compared with a thicker single long stem,this stress shielding effect was significantly reduced,and the load was evenly distributed among the four short stems,so there was no stress concentration at the bottom of the pile.(2)The design with a rectangular hole in the middle not only provided relatively good stability,but also helped to reduce stress shielding of cancellous bone to a certain extent,with a reduction rate of 77.5%.(3)Compared with a single-stem tibial intramedullary stem prosthesis,both the four-post tibial intramedullary stem prosthesis and the four-post tibial intramedullary stem prosthesis with a hole in the middle have good stability,which can reduce stress shielding to a certain extent without causing stress concentration,providing theoretical guidance for the design of the tibial intramedullary stem.

Osteosarcoma is the most common malignant bone tumor disease in young children and young people. It usually has strong invasiveness, and conventional treatment cannot achieve the expected results. Therefore, studying the mechanism of tumor cell death and exploring more effective treatment methods is of great significance. As a new form of cell death, ferroptosis has been found to have three main regulatory pathways closely related to tumor cell molecular mechanisms, genes, etc. This provides a theoretical basis for the application of ferroptosis in the treatment of osteosarcoma. This article reviews recent research on the interaction between ferroptosis and osteosarcoma in regulating molecules, genes, and other factors, as well as the application of ferroptosis in the treatment of osteosarcoma.

This article introduces the occupational disease diagnosis of work-related musculoskeletal disorders such as lumbar and spinal injuries in Germany, and focuses on the research and standard values of the maximum pressure tolerance of intervertebral discs. This article mainly introduces the dose model limits and their applications proposed by the Mainz Dortmund Dosis model (MDD), the judgment of the German Social Court (Bundessozialgericht, BSG), and the German Spinal Research Re evaluation (Deutsche Wirbels ulentudieⅡ, DWSⅡ) ; X-ray manifestations and measurements of intervertebral disc injury; Problems in actual cases and diagnosis. In order to provide reference and inspiration for the occupational diseases diagnosis of work related musculoskeletal disorders in China.

Objective:To develop and validate an artificial intelligence (AI) diagnostic model for coronary artery disease based on facial photos.Methods:This study was a cross-sectional study. Patients who were scheduled to undergo coronary angiography (CAG) at Beijing Anzhen Hospital and Beijing Daxing Hospital from August 2022 to November 2023 were included consecutively. Before CAG, facial photos were collected (including four angles: frontal view, left and right 60° profile, and top of the head). Photo datasets were randomly divided into a training set, a validation set (70%), and a testing set (30%). The model was constructed using Masked Autoencoder (MAE) and Vision Transformer (ViT) architectures. Firstly, the model base was pre-training using 2 million facial photos obtained from the publicly available VGGFace dataset, and fine-tuned by the training and validation sets; the model was validated in the test set. In addition, the ResNet architecture was used to process the dataset, and its outputs were compared with those of the models based on MAE and ViT. In the test set, the area under the operating characteristic curve ( AUC) of the AI model was calculated using CAG results as the gold standard. Results:A total of 5 974 participants aged 61 (54, 67) years were included, including 4 179 males (70.0%), with a total of 84 964 facial photos. There were 79 140 facial photos in the training and validation sets, with 3 822 patients with coronary artery disease; there were 5 824 facial photos in the test set, with 239 patients with coronary artery disease. The AUC value of the MAE and ViT model initialized with pre-training model weights was 0.841 and 0.824, respectively. The AUC of the ResNet model initialized with random weights was 0.810, while the AUC of the ResNet model initialized with pre-training model weights was 0.816. Conclusion:The AI model based on facial photos showes good diagnostic performance for coronary artery disease and holds promise for further application in early diagnosis.

This article introduces the occupational disease diagnosis of work-related musculoskeletal disorders such as lumbar and spinal injuries in Germany, and focuses on the research and standard values of the maximum pressure tolerance of intervertebral discs. This article mainly introduces the dose model limits and their applications proposed by the Mainz Dortmund Dosis model (MDD), the judgment of the German Social Court (Bundessozialgericht, BSG), and the German Spinal Research Re evaluation (Deutsche Wirbels ulentudieⅡ, DWSⅡ) ; X-ray manifestations and measurements of intervertebral disc injury; Problems in actual cases and diagnosis. In order to provide reference and inspiration for the occupational diseases diagnosis of work related musculoskeletal disorders in China.

In recent years, the biopharmaceutical industry has developed rapidly, creating urgent demand for high-quality, innovative, and application-oriented talents. In the context of "first-class undergraduate education", it is of great significance to reform and explore biopharmaceutics blended learning to foster professional talents who can adapt to the industrial development. The blended teaching of biopharmaceutics course in Hubei University was based on small private online course (SPOC) and ChaoXing platform, aiming to meet the first-class "AIC (advanced, innovation, challenge)". The course strengthened the three phases of teaching: before, during, and after class, and innovated teaching methods actively to achieve curriculum goals, and integrated typical cases organically. In addition, the course improved the discriminative power of assessment by strengthening the formative performance evaluation. Moreover, the course provided guidance for students to improve the learning efficiency through investigating the students' learning behavior and employing the marginal utility curve to analyze the characteristics of group activities. Furthermore, the course also offered students personalized learning guidance based on their career planning. The reform of biopharmaceutics blended teaching has achieved significant outcomes, such as improving students' satisfaction, students' innovation and entrepreneurship ability, and curriculum construction level, thus may serve as a reference for the teaching reform and research of the related courses.
Humans ; Biopharmaceutics ; Curriculum ; Learning ; Students

Two Hofmann-Martius-like rearrangement products generated in the production of duloxetine hydrochloride were studied. The structures and generation mechanism of the two Hofmann-Martius rearrangement products were analyzed by LC-MS and NMR. The results showed that under the acidic conditions, the naphthol ether bond of duloxetine would break down and the intermediates of naphthol and the alkyl thiophene cation was generated; the two Hofmann-Martius-like rearrangement products were proven to be a pair of isomers produced by nucleophilic substitution between the naphthol intermediate state and the alkyl thiophene cation intermediate state at the ortho or the para position, respectively. The production of two isomers was related to the strong acidic and protic solvent environment. Therefore, in the salting process of duloxetine hydrochloride, the pH value should be controlled in the range of 3-7 and temperature should be maintained below 50 °C, as well as the nonprotic solvent acetone is chosen to avoid generation of the two isomers.

Objective To investigate the relationship between occupational noise exposure and glycated hemoglobin (HbA1c) levels, as well as prediabetes diagnosed by HbA1c. Methods A total of 1 181 workers from a cigarette factory were selected as the research subjects using a judgment sampling method. Workers were divided into control, low-level noise exposure and high-level noise exposure groups, consisting of 236, 359, and 586 individuals, respectively. The blood sample was collected for HbA1c test and occupation noise exposure intensity in workplace was detected by an area-sampling method. Results There were no statistical significant differences in HbA1c levels and prediabetes prevalence among the three groups of workers (all P>0.05). After adjusting for potential confounding factors such as years of service, gender, smoking, pack-years of smoking, alcohol consumption, and body mass index, multiple linear regression analysis showed that the high-level noise exposure group had higher HbA1c level than the control group (P<0.05). Multivariable logistic regression analysis results showed that the high-level noise exposure group had higher risk of prediabetes compared with the control group (P<0.05). Conclusion Occupational noise exposure could be a risk factor for the increased HbA1c levels and prediabetes incidence among the occupational population. More attention should be paid to the effects of occupational noise exposure on the HbA1c level in occupational health surveillance.

Exosomes are extracellular microbubbles related to intercellular communication, which have the ability to transport and transfer biological macromolecules. Pain will lead to a sharp decline in the quality of life of patients, and will give patients and society a heavy medical burden. More and more evidences show that the exosomes plays an important role in the pathological process of pain related diseases.Summarizing the exosomes and the biomolecules carried by them under different pain conditions, and identifying the specific exosomes related to the pain state will be helpful for early diagnosis and treatment of pain related diseases. In addition, the ability of exosomes to transmit information and its widespread characteristics in the body indicate that they have broad prospects as a new diagnosis and treatment tool in the field of pain. A better understanding of the relationship between the exosomes and pain will provide a novel and promising treatment for patients with pain.