By consulting relevant literature of ancient herbal books and processing specifications， this paper made a systematic research and analysis of Ostreae Concha， including the name， producing area， harvesting， quality， historical evolution of processing， relevant processing specifications， modern processing technology， and changes in chemical composition and pharmacological effects before and after processing， in order to provide documentary evidence for the research on processing technology and the establishment of quality standards. According to the textual research， it is known that Ostreae Concha has a long history of being used in medicine， and there have been many aliases and local names in each historical period. Shennong's Classic of the Materia Medica（Shennong Bencaojing） began to use Muli as the correct name， which has continued to use to today， and there were also aliases such as Muge， Zuogu Muli and Haoke. Ostreae Concha has a wide range of localities and irregular harvesting periods. The ancients believed that its left shell was of superior quality， but this has not been seen in modern. And there were many kinds of processing methods of Ostreae Concha， such as grinding， roasting， calcining， frying， simmering， quenching and so on， and the calcining was still in use. The different editions of Chinese Pharmacopoeia from 1963 to 2020 contain only calcined Ostreae Concha， and the local processing specifications mainly include three kinds of processed products（calcined products， salt-soaked products and vinegar-soaked products）. Modern processing research mainly focuses on process optimization， changes in chemical composition and pharmacological effects， and the research methods are relatively single. Overall， there are currently issues such as inconsistent processing standards， unclear process parameters and imperfect quality standards， which are not conducive to the quality control and standardized clinical use of Ostreae Concha. Therefore， it is necessary to further investigate the pharmacological substance basis of Ostreae Concha and its processed products in order to elucidate the processing mechanism， standardize the processing technology and improve the quality standard.

Objective To establish a liquid chromatography method for the simultaneous determination of 13 aromatic amine compounds (AAs) in workplace air. Methods A total of 13 AAs in both vapor and aerosol phases were collected in workplace air using a new GDH-6 sampling tube. Samples were desorbed and eluted with methanol, separated using a Symmetry Shield™ RP₁₈ reversed-phase liquid chromatography column, and detected with a diode array detector. Quantification was performed using an external standard method. Results The linear range of the 13 AAs measured by this method was 0.02-373.60 μg/L with the correlation coefficients greater than 0.999 0. The minimum detection concentration was 0.09-14.37 μg/m³, and the minimum quantitative concentration was 0.31-47.90 μg/m³ (both calculated based on sampling 15.0 L of air and 3.0 mL of elution volume). The average desorption and elution efficiency ranged from 97.46% to 101.23%. The within-run relative standard deviation (RSD) was 0.10%-5.99%, and the between-run RSD was 0.17%-2.71%. Samples could be stably stored in sealed conditions at 2-8 ℃ for more than seven days. Conclusion This method is suitable for the simultaneous determination of 13 AAs in workplace air, including both vapor and aerosol phases.

Objective To establish a method for simultaneous determination of four high-molecular-weight thiol derivatives (TDs) in workplace air by gas chromatography. Methods The four kinds of vapor-phase macromolecular TDs (1-pentanethiol, 1-hexanethiol, 1-benzyl mercaptan, and n-octanethiol) in the workplace air were collected using the GDH-1 air sampling tubes, desorbed with anhydrous ethanol, separated on a DB-FFAP capillary column, and determined by flame ionization detector. Results The quantitation range of the four TDs was 0.30-207.37 mg/L, with the correlation coefficients greater than 0.999 00. The minimum detection mass concentrations and minimum quantitation mass concentrations were 0.18-0.32 and 0.60-1.05 mg/m³, respectively (both calculated based on the 1.5 L sample and 3.0 mL desorption solvent). The mean desorption efficiencies ranged from 87.07% to 103.59%. The within-run and between-run relative standard deviations were 1.92%-8.22% and 1.89%-8.45%, respectively. The samples can be stored at room temperature or 4 ℃ for three days and up to 7 days at -18 ℃. Conclusion This method is suitable for the simultaneous determination of four vapor-phase TDs in workplace air.

Objective To improve the national standardized method for determining biphenyl in workplace air, which was based on activated carbon tube sampling, carbon disulfide desorption, and gas chromatography, by developing a method using GDX-502 tubes for sampling, toluene for desorption, and gas chromatography. Methods Workplace air samples were collected using GDX-502 sampling tubes and desorbed with toluene, followed by determination with gas chromatography. Results The improved method demonstrated good linearity for biphenyl concentrations ranging from 0.33 to 330.00 mg/L, with a correlation coefficient of 0.999 9. The detection limit and lower limit of quantification were 0.06 and 0.21 mg/L, and the minimum detection concentration and minimum quantification concentration were 0.04 and 0.14 mg/m³ (based on 1.5 L air sample volume), respectively. The average desorption efficiency ranged from 96.6% to 101.1%. The within-run and between-run relative standard deviations were 0.6%-1.4% and 1.4%-3.3%, respectively, with 100.0% sampling efficiency. Samples remained stable for at least 14 days at room temperature. Conclusion The improved method for biphenyl detection demonstrates rapid and accurate performance, with the advantages of low detection limits and high sampling and desorption efficiency.

ObjectiveTo investigate the potential mechanism of Liangxue Tuizi Formula （凉血退紫方， LXTZF） in treating Henoch-Schönlein Purpura （HSP） by examining its regulatory effect on neutrophil extracellular trap （NETs） dysregulation via the rapidly accelerated fibrosarcoma kinase （RAF）/mitogen-activated protein kinase （MEK）/extracellular signal-regulated kinase （ERK） signaling pathway. MethodsSeventy Wistar rats were randomly allocated into a blank control group （n=14） and a modeling group （n=56）. Rats in the modelling group underwent an eight-week modelling period to establish HSP rat models with blood-heat syndrome via modified ovalbumin （OVA） induction method combined with oral administration of heat-property Chinese herbal medicine. Fifty successfully modeled rats were subsequently randomly divided into five groups （n=10 per group）， model group， compound glycyrrhizin group， LXTZF group， RAF inhibitor group， and LXTZF + RAF agonist group. Additionally， 10 rats were selected from the original blank control group for the final experiment. From the 11th week of modelling， rats in the blank control group and the model group received 1 ml/（100 g·d） ultrapure water via oral administration， in addition to 0.5 ml/（kg·d） 0.9% sodium chloride solution via intraperitoneal injection. The LXTZF group and the compound glycyrrhizin group received 7.5 g/（kg·d） LXTZF granule suspension via gavage， 13.5 mg/（kg·d） compound glycyrrhizin suspension via gavage， respectively. The RAF inhibitor group received 1 mg/（kg·d） GW5074 suspension via intraperitoneal injection and ultrapure water via oral administration； the LXTZF + RAF agonist group received 7.5 g/（kg·d） LXTZF granule suspension via gavage and 1 mg/（kg·d） paclitaxel suspension via intraperitoneal injection. All administrations were performed once daily for 4 weeks. After intervention， skin tissue histopathology was examined by hematoxylin and eosin （H&E） staining， immunoglobulin A （IgA） deposition was assessed via immunofluorescence， serum levels of neutrophil elastase （NE）， tumor necrosis factor-α （TNF-α）， and vascular cell adhesion molecule-1 （VCAM-1） were measured using enzyme-linked immunosorbent assay （ELISA）， serum myeloperoxidase （MPO） level was determined by a colorimetric assay； the mRNA expression levels of RAF， MEK， and ERK in skin tissue were detected by real-time quantitative polymerase chain reaction （RT-qPCR）； and the protein expression of RAF， MEK， ERK， as well as phosphorylated MEK （p-MEK） and phosphorylated ERK （p-ERK）， were analyzed by Western Blot. ResultsSkin tissue in the blank control group rats remained normal， whereas the model group exhibited neutrophil infiltration and haemorrhage with red blood cell rupture. In all drug intervention groups， neutrophil infiltration and haemorrhagic exudation reduced markedly， with LXTZF group demonstrating the most pronounced improvement. Compared with the blank control group， rats in the model group exhibited enhanced IgA fluorescence intensity in skin tissue， elevated serum levels of NE， MPO， TNF-α and VCAM-1， increased mRNA expression of RAF， MEK， ERK1 and ERK2， as well as heightened RAF protein levels and p-MEK/MEK and p-ERK/ERK ratios （P＜0.05）. Compared with the model group， the drug intervention groups exhibited reduced IgA fluorescence intensity in skin tissue， along with decreased serum levels of NE， MPO， TNF-α， and VCAM-1 （P＜0.05）. In LXTZF group and RAF inhibition groups， reduced mRNA expression of RAF， MEK， ERK1， and ERK2 was observed in rat skin tissue， alongside decreased RAF protein levels and reduced p-MEK/MEK and p-ERK/ERK ratios （P＜0.05）. Compared with LXTZF + RAF agonist group， the compound glycyrrhizin group， LXTZF group， and RAF inhibitior group exhibited reduced IgA fluorescence intensity in skin tissue， decreased serum NE， MPO， TNF-α， and VCAM-1 levels， and decreased MEK mRNA expression and p-MEK/MEK ratio （P＜0.05）. ConclusionThe potential mechanism by which LXTZF treats Henoch-Schönlein purpura with blood heat syndrome may involve blocking the RAF/MEK/ERK signaling pathway in skin tissue， and suppressing excessive formation of NETs， thereby reducing IgA deposition in dermal microvessels and attenuating systemic inflammatory responses.

ObjectiveTo understand the monitoring result of occupational hazard in the workplace of key industries in Guangdong Province from 2020 to 2023. Methods The data of occupational hazards in the workplace of 20 key industries in Guangdong Province from 2020 to 2023 were collected from the “Workplace Occupational Hazard Monitoring System” of the Chinese Disease Prevention and Control System subsystem. The monitoring result of occupational hazard factors, occupational health training, occupational health examination, occupational protection, detection of occupational hazardous agents such as dust, chemical substances and noise were analyzed. Results A total of 13 058 enterprises from key industries were recruited as the monitoring subjects in Guangdong Province. There were 290 large-, 1 342 medium-, 7 635 small-, and 3 791 micro-enterprises, with small and micro-enterprises accounting for 58.5% and 29.0% of the total, respectively. A total of 7 542 enterprises exceeded the national standard in the detection of occupational hazards, with a rate of 57.8%. A total of 1 942 517 workers from 13 058 enterprises were recruited, with 835 567 workers were exposed to occupational hazards, with a rate of 43.0%. The rate of occupational health training for enterprise leaders, occupational health management personnel, and workers was 71.9%, 73.8%, and 86.5%, respectively. The abnormal rate of occupational health examinations for workers exposed to noise, dust, and chemical agents was 2.0%, 0.6%, and 1.0%, respectively. The distribution rate of dust masks, anti-poisoning masks or face masks, and noise prevention earplugs or earmuffs was 83.3%, 71.3%, and 77.8%, respectively. The rate of installation of dust prevention facilities, anti-poisoning facilities, and noise prevention facilities was 85.6%, 81.2%, and 50.1%, respectively. The rate of exceeded the national standard of dust, noise in the worksites/types and workplaces showed a decreasing trend year by year (all P<0.01), while the rate of exceeded the national standard of chemical agents in worksites/types and workplaces showed an increasing trend year by year in various occupational hazards (all P<0.01). Conclusion Occupational hazards in the workplace of key industries in Guangdong Province are relatively common. The proportion of workers exposed to occupational hazards is relatively high. It is necessary to further improve the use of noise prevention facilities and protective equipment, strengthen occupational health training for enterprises throughout the province and regularly monitor occupational hazards to reduce the risk of occupational diseases.

Objective:To explore the causal relationship between thyroid dysfunction and sepsis based on the bidirectional two-sample Mendelian randomization (MR) method.Methods:The genome-wide association study (GWAS) dataset were selected to screen single nucleotide polymorphisms (SNP) associated with thyroid dysfunction as instrumental variable (IV) for genetic variation, using hypothyroidism and hyperthyroidism as exposure factor and sepsis as outcome factor. Potential causal relationship between thyroid dysfunction and sepsis was analyzed using a bidirectional two-sample MR method primary analysis method of inverse-variance weighted (IVW). Potential pleiotropic analysis of SNP was performed using the MR Egger regression intercept test. Sensitivity analysis was performed using the "leave one out" test. Reverse MR method was used to prove the causal relationship.Results:The GWAS data were screened based on the three main assumptions of MR, resulting in 101 SNP strongly associated with hypothyroidism and 10 SNP strongly associated with hyperthyroidism entering the MR analysis. The results of the MR using the IVW method showed that the risk of sepsis in individuals with hypothyroidism was 2.293 times higher than those without hypothyroidism [odds ratio ( OR) = 2.293, 95% confidence interval (95% CI) was 1.199-4.382, P = 0.012]. There was no significant difference in the risk of sepsis between hyperthyroid and non-hyperthyroid populations ( OR = 1.049, 95% CI was 0.999-1.100, P = 0.560). MR Egger regression intercept test showed that the included SNP did not have pleiotropy, and the MR-PRESSO test did not find outliers. Sensitivity analysis suggested that the results of MR were stable. The results of the reverse MR analysis showed that the reverse causal relationship between hyperthyroidism and sepsis was not proved ( OR = 0.996, 95% CI was 0.988-1.004, P = 0.338), which further confirmed the robust MR analysis result. Conclusion:The results of the bidirectional two-sample MR analysis show that hypothyroidism can increase the risk of sepsis onset, while there is no causal relationship between hyperthyroidism and sepsis.

Objective:To analyze the hemodynamic changes of different types of unruptured intracranial aneurysms before and after flow diverter (FD) treatment with computational fluid dynamics (CFD), and lay research foundation for precision treatment and prognosis evaluation for unruptured intracranial aneurysms.Methods:Four patients with different types of unruptured intracranial aneurysms, admitted to Department of Neurosurgery, First Affiliated Hospital of Air Force Medical University from January 2022 to March 2022, were chosen. Digital subtraction angiography (DSA) data of the patients before and immediately after surgery were collected. Morphological and hemodynamic parameters of the aneurysms were calculated by 3D reconstruction, finite element simulation, and CFD methods: ostium ratio (OsR), neck ratio (NR), area ratio (ArR), volume ratio (VoR), wall shear stress (WSS), normalized wall shell stress (NWSS), blood inflow, relative inflow, aneurysm average velocity, parent artery average velocity, normalized velocity, residual flow volume (RFV), and inflow concentration index (ICI); differences of these indexes before and after treatment were compared.Results:The OsR of 6 aneurysms was 0.225, 0.267, 0.265, 0.389, 1.000, 1.000, respectively; NR was 1.220, 0.274, 1.090, 1.587, 2.809, and 4.019, respectively; ArR was 0.608 and 0.224, 0.623, 3.462, 1.225 and 1.784, respectively; and VoR was 0.386, 0.052, 0.212, 3.462, 0.422 and 1.882, respectively. The parameters of WSS, NWSS, blood inflow, relative inflow, aneurysm average velocity, parent artery average velocity, normalized velocity, RFV, and ICI decreased obviously after FD implantation.Conclusion:On the basis of 3D reconstruction combined with FD/coil virtual implantation, CFD-based hemodynamic analysis can obtain accurate parameters of different types of intracranial aneurysms before and after FD treatment.

Objective: To establish a solvent desorption-gas chromatography method for determination of dimethyl carbonate (DMC) in workplace air. Methods: The air samples were collected using activated carbon tubes, desorbed by carbon disulfide, separated by dimethylpolysiloxane capillary columns, and detected by a flame ionization detector. Results: The linear range of DMC was 2.14 to 1.07×10⁴ mg/L, and the correlation coefficient was greater than 0.999. The detection limit was 0.14 mg/L, the lower limit of quantification was 0.47 mg/L, the minimum detection concentration was 0.10 mg/m³, and the minimum quantification concentration was 0.32 mg/m³ (based on 1.5 L workplace air). The average desorption efficiency of the method was 96.2% to 102.0%. Both the within-run and between-run relative standard deviations were 0.9% to 2.3%. The samples could be stored for at least seven days at four celsius degree. Conclusion: This method shows high desorption efficiency, high sensitivity, good precision and is simple in using. It can be used for the determination of DMC in workplace air.

Objective: To establish a solvent desorption-gas chromatography method for the determination of 1,1,2,2-tetrachloroethane and 1,1,1,2-tetrachloroethane in workplace air. Methods: The 1,1,2,2-tetrachloroethane and 1,1,1,2-tetrachloroethane in workplace air were collected using activated carbon tubes, desorbed with carbon disulfide, and separated and detected by gas chromatography. The quantifications were based on standard curves. Results: The linear ranges of 1,1,2,2-tetrachloroethane and 1,1,1,2-tetrachloroethane were 0.98-395.50 and 0.87-395.50 mg/L, respectively, with the correlation coefficient of 0.999 95. The detection limits were 0.29 and 0.26 mg/L, respectively. The average of desorption efficiency was 92.04%-104.67%. The within- and between-run relative standard deviations were 1.42%-2.09% and 1.63%-6.09%, respectively. The sampling efficiency was more than 98.00%. The samples could be stored at room temperature for at least 14 days. Conclusion: This method can be used in detection of 1,1,2,2-tetrachloroethane and 1,1,1,2-tetrachloroethane in workplace air.