Objective To explore the construction of α-1,3-galactosyltransferase (GGTA1) gene-knockout (GTKO) Diannan miniature pigs and the kidney xenotransplantation from pigs to rhesus macaques, and to assess the effectiveness of GTKO pigs. Methods The GTKO Diannan miniature pigs were constructed using the CRISPR/Cas9 gene-editing system and somatic cell cloning technology. The phenotype of GTKO pigs was verified through polymerase chain reaction, Sanger sequencing and immunofluorescence staining. Flow cytometry was used to detect antigen-antibody (IgM) binding and complement-dependent cytotoxicity. Kidney xenotransplantation was performed from GTKO pigs to rhesus macaques. The humoral immunity, cellular immunity, coagulation and physiological indicators of the recipient monkeys were monitored. The function and pathological changes of the transplanted kidneys were analyzed using ultrasonography, hematoxylin-eosin staining, immunohistochemical staining and immunofluorescence staining. Results Single-guide RNA (sgRNA) targeting exon 4 of the GGTA1 gene in Diannan miniature pigs was designed. The pGL3-GGTA1-sgRNA1-GFP vector was transfected into fetal fibroblasts of Diannan miniature pigs. After puromycin selection, two cell clones, C59# and C89#, were identified as GGTA1 gene-knockout clones. These clones were expanded to form cell lines, which were used as donor cells for somatic cell nuclear transfer. The reconstructed embryos were transferred into the oviducts of trihybrid surrogate sows, resulting in 13 fetal pigs. Among them, fetuses F04 and F11 exhibited biallelic mutations in the GGTA1 gene, and F04 had a normal karyotype. Using this GTKO fetal pig for recloning and transferring the reconstructed embryos into the oviducts of trihybrid surrogate sows, seven surviving piglets were obtained, all of which did not express α-Gal epitope. The binding of IgM from the serum of rhesus monkey 20# to GTKO pig PBMC was reduced, and the survival rate of GTKO pig PBMC in the complement-dependent cytotoxicity assay was higher than that of wild-type pig. GTKO pig kidneys were harvested and perfused until completely white. After the left kidney of the recipient monkey was removed, the pig kidney was heterotopically transplanted. Following vascular anastomosis and blood flow restoration, the pig kidney rapidly turned pink without hyperacute rejection (HAR). Urine appeared in the ureter 6 minutes later, indicating successful kidney transplantation. The right kidney of the recipient was then removed. Seven days after transplantation, the transplanted kidney had good blood flow, the recipient monkey's serum creatinine level was stable, and serum potassium and cystatin C levels were effectively controlled, although they increased 10 days after transplantation. Seven days after transplantation, the levels of white blood cells, lymphocytes, monocytes and eosinophils in the recipient monkey increased, while platelet count and fibrinogen levels decreased. The activated partial thromboplastin time, thrombin time and prothrombin time remained relatively stable but later showed an upward trend. The recipient monkey survived for 10 days. At autopsy, the transplanted kidney was found to be congested, swollen and necrotic, with a small amount of IgG deposition in the renal tissue, and a large amount of IgM, complement C3c and C4d deposition, as well as CD68⁺ macrophage infiltration. Conclusions The kidneys of GTKO Diannan miniature pigs may maintain normal renal function for a certain period in rhesus macaques and effectively overcome HAR, confirming the effectiveness of GTKO pigs for xenotransplantation.

Objective To develop GTKO (α-1,3-galactosyltransferase gene-knockout, GTKO)/hCD55 (human CD55) gene-edited xenotransplant donor pigs and verify their function. Methods In this study, CRISPR (clustered regularly interspaced short palindromic repeats)/Cas9 (CRISPR-associated nuclease 9), PiggyBac transposon technology and somatic cell nuclear transfer technology were used to construct GTKO/hCD55 gene-edited Diannan miniature pigs. The phenotype and function of GTKO/hCD55 pigs were analyzed by Sanger sequencing, real-time fluorescence quantitative PCR, flow cytometry, immunofluorescence, bisulfite sequencing, antigen-antibody binding assays, and complement-dependent cytotoxicity assays. Results After transfection of PX458 and PiggyBac gene editing vectors into wild-type fetal pig fibroblasts, 48 single-cell colonies were obtained through puromycin drug screening. Two single-cell colonies were selected for somatic cell nuclear transfer, resulting in two fetal pigs at 33 days of gestation. The GGTA1(α-1,3-galactosyltransferase) genotypes of fetal pig F01 were -17 bp and wild type (WT), while the GGTA1 genotypes of fetal pig F02 were -26 bp/+2 bp and -3 bp. The hCD55 mRNA expression levels of both fetal pigs were significantly higher than those of WT pigs (P＜0.01). The fetal pig F02 was selected as the donor cell source for recloning, 11 surviving piglets were obtained, all identified as GTKO/hCD55 gene-edited pigs. These pigs showed absence of α-Gal antigen expression, but weak or no expression of hCD55 was observed. Methylation analysis of the hCD55 gene's CpG island showed hypermethylation in kidney tissue lacking hCD55 expression, whereas it was not methylated or partially methylated in kidney tissue expressing hCD55. Moreover, codon optimization of the CpG island of the hCD55 gene to reduce CG content could achieve stable expression of the hCD55 gene. In addition, antigen-antibody binding experiment showed that the amount of human IgM binding to GTKO/hCD55 gene-edited pig fibroblasts was significantly lower than that of WT pigs (P＜0.01). Complement-dependent cytotoxicity experiment showed that the survival rate of fibroblasts in GTKO/hCD55 pigs was significantly higher than that in WT pigs (P＜0.01). Conclusion This study demonstrates the successful generation of GTKO/hCD55 gene-edited xenotransplant donor pigs. Methylation-induced gene silencing of the hCD55 gene can be effectively avoided by reducing the CG content of the CpG island through codon optimization. This study provides a reference for the development of xenotransplant donor pigs and guides subsequent research on xenotransplantation.

Objective To investigate the genetic causes of auditory neuropathy with optic atrophy in a family.Methods The proband's medical history and family history were inquired in detail,and relevant clinical examina-tions were performed to confirm the diagnosis of auditory neuropathy with optic atrophy,and the genetic pedigree of the family was drawn.Peripheral blood of proband(Ⅲ-7)was collected for whole exome sequencing,and the patho-genicity of the detected mutations were interpreted.Blood samples of proband's wife(Ⅲ-8),eldest daughter(Ⅳ-7),second daughter(Ⅳ-9)and son(Ⅳ-10)were tested for mutation sites by Sanger sequencing.Combined with clinical manifestations and examination results,the family was studied.Results The genetic pattern of this family was autosomal dominant.The proband showed decreased visual acuity at the age of 19,bilateral sensorineural deaf-ness at the age of 30,and decreased speech recognition rate.Among 20 members of the family of 5 generations,10(2 deceased)showed similar symptoms of hearing and visual impairment.Proband(Ⅲ-7),eldest daughter(Ⅳ-7)and son(Ⅳ-10)underwent relevant examination.Pure tone audiometry showed bilateral sensorineural deafness.ABR showed no response bilaterally.The 40 Hz AERP showed no response in both ears.OAE showed responses in some or all of the frequencies.No stapedial reflex was detected.The eye movement of Ⅲ-7 and Ⅳ-10 were reasona-ble in all directions,and color vision was normal.Ocular papilla atrophy was observed in different degrees in fundus examination.OCT showed thinning of optic disc nerve fibers in both eyes,and visual evoked potential showed pro-longed P100 wave peak.They were diagnosed as hereditary auditory neuropathy with optic atrophy.A mutation of the OPA1 gene c.1334G＞A(p.Arg445His,NM_015560.2)at a pathogenic locus on chromosome 3 was detected by whole exon detection in Ⅲ-7.The results of generation sequencing analysis showed that the OPA1 gene c.1334G＞A(p.Arg445His,NM_015560.2)mutation of chromosome 3 was also found in Ⅳ-7 and Ⅳ-10.Meanwhile,the gen-otypes of Ⅲ-8 and Ⅳ-9 were wild homozygous,that is,no mutation occurred.Conclusion The OPA1 c.1334G＞A(p.Arg445His,NM_015560.2)mutation site might be the pathogenic mutation in this family.

Objective:To evaluate the short-term rehabilitation effect of wearable visual training devices based on extended reality (XR) glasses in patients after macular hole surgery.Methods:A self-controlled study was conducted.Eleven patients with monocular low vision after macular hole surgery were recruited at Renmin Hospital of Wuhan University from October 2022 to March 2024.All patients underwent biofeedback training for 3 months using the independently developed visual rehabilitation training glasses LOOKBON T10.The LogMAR best corrected visual acuity (BCVA), retinal sensitivity, effective fixation rate, fixation stability, reading speed, vertical metamorphopsia (MV), horizontal metamorphopsia (MH), and Chinese version of the visual-related quality of life assessment form (CVRQoL-25) were compared before and after training.This study adhered to the Declaration of Helsinki.The study protocol was approved by the Ethics Committee of Renmin Hospital of Wuhan University (No.WDRY2024-K263).Written informed consent was obtained from each subject.Results:After training, the patients' BCVA, retinal sensitivity, effective fixation rate, fixation stability, and reading speed were 0.69±0.19, (21.61±2.75)db, (92.43±4.06)%, (93.09±4.31)%, and (104.82±21.85) characters/minute, respectively, which were significantly improved compared to 0.85±0.28, (17.71±3.17)db, (31.83±19.05)%, (32.35±19.12)%, and (69.64±20.17) characters/minute before training ( t=5.253, -5.987, -11.561, -12.003, -11.682; all at P<0.001).After training, MV and MH were (0.29±0.20)° and (0.21±0.24)°, respectively, which were significantly reduced compared to pre-training (0.44±0.24)° and (0.43±0.41)° ( t=9.238, 4.068; both at P<0.01).After training, the CVRQoL-25 score was 1 193.18±229.43, which was significantly higher than pre-training 947.73±203.86 ( t=-11.687, P<0.001). Conclusions:The application of wearable visual training equipment based on XR glasses can effectively improve the visual function of patients with poor visual function recovery after macular hole surgery, and enhance their quality of life.

Osteotomy around the knee includes medial opening wedge high tibial osteotomy (HTO), lateral closing wedge HTO, lateral opening wedge distal femoral osteotomy (DFO), medial opening wedge DFO, and double-site osteotomy. Osteotomy redistributes the knee joint pressure by correcting the lower limb alignment, which can effectively delay the progression of knee osteoarthritis. Currently, three methods are used to determine the intraoperative osteotomy angle: the pre-drilling method, wedge block insertion method, and angle-guided linkage method. Coronal plane accuracy is evaluated using the hip-knee-ankle (HKA) angle, medial proximal tibial angle (MPTA), and ratio of lower limb weight-bearing line, while sagittal plane accuracy is assessed by measuring the posterior tibial slope (PTS). Individualized osteotomy guide plate can enhance osteotomy accuracy. The preparation process includes: (1) importing low-dose CT data of both lower limbs in DICOM format into reconstruction software to establish a 3D model of both lower limbs; (2) determining the osteotomy plane and distraction angle through threshold segmentation, importing the plate model, and establishing the length and position of each screw; (3) using fused deposition modeling to layer materials through a nozzle to create the 3D object. Individualized osteotomy guide plate in osteotomy around the knee can not only improve the accuracy of surgery, but also reduce the intraoperative fluoroscopy times and the incidence of complications. The operation efficiency and postoperative rehabilitation are better than those of traditional surgery. With the continuous upgrading of new materials and the improvement of design concepts, the accuracy and efficiency of individualized osteotomy guide will be further improved. Future research will focus on improving the degree of personalization of guide plate design and simplifying the manufacturing process.

Objective:To test the practical effect of the research projects outpatient strategy for application of the National Natural Science Foundation (NSFC) in a hospital of Chinese medicine.Methods:We compared the number and success rate of the National Natural Science Foundation of China grant awards before and after the implementation of the research projects outpatient strategy, and further analyzed the promotional effect of the research projects outpatient strategy on general programs and youth scientists funds through univariate analysis and multivariate Logistic regression.Results:Since the implementation of the research projects outpatient strategy, both the number of NSFC grant awards and the success rate continuously increased, indicating that the strategy played a positive role in improving the overall success rate of the hospital. However, this effect was primarily reflected in the assistance provided to applications for youth scientists funds. The main favorable factor for winning general programs was the applicant′s preliminary foundation. Applicants who have previously received NSFC funding had a higher success rate.Conclusions:The strategy of research projects outpatient can promote the winning of NSFC youth scientists funds.

In clinical practice, radiopharmaceutical dynamic imaging technology requires the bolus injection method to complete injection. Due to the failure rate and radiation damage of manual injection, even experienced technicians still bear a lot of psychological burden. This study combined the advantages and disadvantages of various manual injection modes to develop the radiopharmaceutical bolus injector, and explored the application of automatic injection in the field of bolus injection from four aspects: radiation protection, occlusion response, sterility of injection process and effect of bolus injection. Compared with the current mainstream manual injection method, the bolus manufactured by the radiopharmaceutical bolus injector based on the automatic hemostasis method had a narrower full width at half maximum and better repeatability. At the same time, radiopharmaceutical bolus injector had reduced the radiation dose of the technician's palm by 98.8%, and ensured more efficient vein occlusion recognition performance and sterility of the entire injection process. The radiopharmaceutical bolus injector based on automatic hemostasis has application potential in improving the effect and repeatability of bolus injection.
Radiopharmaceuticals ; Injections ; Hand

OBJECTIVE To understand the safety of Ilaprazole sodium for injection in clinical practice. METHODS From Jan. 1st 2019 to Feb. 29th 2020， the data of 3 926 valid hospitalized patients receiving Ilaprazole sodium for injection were collected prospectively from 5 third-level hospitals through CHPS， and the post-marketing safety analysis was performed by using retrospective multicenter single cohort study. At the same time， a nested case-control study （the ratio of trial group and control group was 1∶4） was used to confirm the baseline stability of this study cohort and the correlation between adverse reactions and Ilaprazole sodium for injection. RESULTS Among 3 926 patients， 3 patients experienced 5 adverse drug events after using Ilaprazole sodium for injection， with the incidence of 0.076%. There was no serious adverse event， and the occurrence time was 2 days after medication； adverse drug events mainly include elevated liver function indicators （alanine transaminase， aspartate transaminase， total bilirubin）， which were mild and untreated， and all adverse drug events were improved. The results of the nested case-control study showed that the trial group and the control group belonged to the same background baseline， and the occurrence of adverse drug events was more closely related to Ilaprazole sodium for injection. CONCLUSIONS The overall safety of Ilaprazole sodium for injection is relatively high， and the occurrence of adverse events is more related to it.

Food enzymology and enzyme engineering is an important professional course of food science. The course includes the basic theory of enzymology, enzyme engineering technology and the application of enzymes in food industry. Considering the knowledge gap between the teaching contents and the cutting-edge researches, the team constantly adjusted and optimized the course contents to enable students to keep up with state-of-the-art progress by carefully mining the cutting-edge researches. Taking cutting-edge researches as the breakthrough point, we explored the problem-based learning (PBL) teaching model under the guidance of outcome-based education (OBE) concept, and highlighted the importance of the teacher-student and student-student interactions to improve students' enthusiasm and participation. A diversified assessment system was established to evaluate the performance of students in the learning process. The teaching reform consolidated the basic knowledge and expanded the academic frontiers, and fostered students' ability in analyzing problems, designing solutions and achieving team communication. The course may give new insights into the teaching reform of food enzymology and enzyme engineering and other related courses.
Humans ; Students ; Learning

Radiopharmaceutical dynamic imaging typically necessitates intravenous injection via the bolus method. However, manual bolus injection carries the risk of handling errors as well as radiological injuries. Hence, there is potential for automated injection devices to replace manual injection methods. In this study, the effect of micro-bolus pulse injection technology was compared and verified by radioactive experiments using a programmable injection pump, and the overall bubble recognition experiment and rat tail vein simulation injection verification were performed using the piezoelectric sensor preloading method. The results showed that at the same injection peak speed, the effective flushing volume of micro-bolus pulse flushing (about 83 μL/pulse) was 49.65% lower than that of uniform injection and 25.77% lower than that of manual flushing. In order to avoid the dilution effect of long pipe on the volume of liquid, the use of piezoelectric sensor for sealing preloading detection could accurately predict the bubbles of more than 100 μL in the syringe. In the simulated injection experiment of rat tail vein, when the needle was placed in different tissues by preloading 100 μL normal saline, the piezoelectric sensor fed back a large difference in pressure attenuation rate within one second, which was 2.78% in muscle, 17.28% in subcutaneous and 54.71% in vein. Micro-bolus pulse injection method and piezoelectric sensor sealing preloading method have application potential in improving the safety of radiopharmaceutical automatic bolus injection.
Animals ; Rats ; Radiopharmaceuticals/administration & dosage*