[Objective] To analyze the loss rate of platelet donors and evaluate the strategies for establishing a platelet donor bank. [Methods] A total of 1 443 donors who joined the HLA and HPA gene donor bank for platelets in Henan Province from 2018 to 2020 were included in this study. Data on the total number of apheresis platelet donations, annual donation frequency, age at enrollment, donation habits (including the number of platelets donated per session and whether they had previously donated whole blood), and enrollment location were collected from the platelet donor information management system. Donor loss was determined based on the date of their last donation. The loss rates of different groups under various conditions were compared to assess the enrollment strategies. [Results] By the time the platelet bank was officially operational in 2022, 421 donors had been lost, resulting in an loss rate of 29% (421/1 443). By the end of 2023, the overall cumulative loss rate reached 52% (746/1 443). The loss rate was lower than the overall level in groups meeting any of the following conditions: total apheresis platelet donations exceeding 50, annual donation frequency of 10 or more, age at enrollment of 40 years or older, donation of more than a single therapeutic dose per session, or a history of whole blood donation two or more times. Additionally, loss rates varied across different enrollment locations, with higher enrollment numbers generally associated with higher loss rates. [Conclusion] Through a comprehensive analysis of donor loss, our center has adjusted its strategies for establishing the donor pool. These findings also provide valuable insights for other blood collection and supply institutions in building platelet donor banks.

BACKGROUND:The repair and clinical outcome of bone defects remains a hot and difficult area of clinical research,which is a common problem that plagues clinicians.Constructing suitable,reproducible and infinitely close to clinical animal experimental models and their scientific evaluation are essential for further clinical treatment of related diseases. OBJECTIVE:To retrospectively analyze the preparation methods and characteristics of common animal models of femoral bone defects and to assess their strengths and weaknesses,thereby providing some reference for relevant researchers to select appropriate animal models of femoral bone defects. METHODS:PubMed,Web of Science,Medline,and CNKI were retrieved for relevant literature published from January 1,2000 to August 1,2022.The keywords were"bone defect,bone,bones,defect,defects,defective,animal model,animal,model,laboratory,laboratory animal,animal laboratory"in English and"bone defect,animal model,experiment"in Chinese. RESULTS AND CONCLUSION:Twenty-seven randomized controlled animal experiments involving rats,mice,New Zealand rabbits,and sheep were included,analyzed and assessed.The most common types of bone defects were cylindrical bone defects and segmental osteotomy bone defects,generally found in the middle and distal femur.These models are mostly used to evaluate the effects of bone repair materials,drugs,drug-loaded active substances and physical therapy on bone defect repair and explore defect healing mechanisms,particularly the weight-bearing bone defect repair mechanism.Different defect kinds and femoral bone defect ranges have been found in different animal experiments.Researchers can select the suitable animal model and bone defect type based on the goal of the experiment and then set an acceptable bone defect value.Current studies have shown that cylindrical and segmental osteotomy-induced bone defects,mainly in the distal and middle femur,are mostly used in the animal models of femoral bone defects and that the surgical methods and postoperative management are more mature and operable to provide mature experimental animal models.In terms of cylindrical bone defects,rats and New Zealand rabbits are more suitable,whereas segmental osteotomy has no special requirements and all types of animals can meet the experimental requirements.

BACKGROUND:The distribution of the necrotic area plays an important role in hip preservation treatment.At present,there are few studies on whether the difference in the three-dimensional spatial distribution of osteonecrosis of the femoral head affects the clinical outcome of fibular support. OBJECTIVE:To explore the relationship between the spatial distribution and clinical outcome at the sites of osteonecrosis of the femoral head and fibular support using CT three-dimensional reconstruction so as to provide a basis for optimizing the applicable conditions of fibular support and improving the hip preservation effect of fibular support. METHODS:Eighty patients with osteonecrosis of the femoral head who were treated with fibular support for hip preservation from January 2010 to January 2021 were selected as the study subjects according to the inclusion criteria.They were followed up for at least 2 years.According to the clinical outcome,the patients were divided into the successful hip preservation group(n=55)and the failure hip preservation group(n=25).3D reconstruction was performed according to the preoperative and postoperative CT images of the patients.According to the three-column theory,the femoral head was divided into outer nine areas,middle nine areas and inner nine areas(L1-9,C1-9,and M1-9)to explore the spatial distribution of necrotic area of the femoral head and fibular support area and its relationship with clinical outcome. RESULTS AND CONCLUSION:(1)Before operation,the necrotic area of the femoral head was mainly distributed in L1,L2,L4,L5,C1,C2,C4,and C5(the upper and middle part of the anterior part of the outer ninth area and the middle part of the middle ninth area).After operation,the fibular support area was mainly distributed in L5,L6,C5,and C6(the middle and lower part of the outer ninth area and the middle and lower part of the middle ninth area).(2)There were significant differences in the distribution of osteonecrosis of the femoral head between the successful hip preservation group and the failure hip preservation group in L8(the posterior middle part of the outer ninth area),C3(the anterior lower part of the middle ninth area),C6(the lower middle part of the middle part of the inner ninth area)and M2(the anterior middle part of the inner ninth area)(P<0.05).There was a significant difference in the distribution of fibular support in L5 and L6(middle and lower part of outer nine)(P<0.05).Among them,the L8 region could be used as an independent predictor of hip preservation failure in fibular support surgery.The area under the curve of the L8 single factor prediction model was 0.698[95%CI(0.575,0.822)];the sensitivity was 76%,and the specificity was 63.6%.(3)It turns out,when the necrotic area involves L8,C3,C6,and M2,especially L8,the failure of fibular support may increase,and when the fibular support involves L5 and L6,the effect of hip preservation is often not ideal.

Objective:To evaluate the curative effects of 3D printed microporous titanium (tantalum) prosthesis in reconstruction of large segmental bone defects caused by lower extremity osteomyelitis.Methods:A retrospective study was conducted to analyze the clinical data of 18 patients who had been treated for large segmental bone defects caused by lower extremity osteomyelitis between January 2020 to May 2022 at Department of Orthopaedics, The 920th Hospital of Joint Logistics Support Force. There were 10 males and 8 females with an age of (45.3±14.1) years. The defects were at the left side in 13 cases and at the right side in 5 cases, at the femur in 11 cases and at the tibia in 7 cases. The duration of osteomyelitis was 1.0 (1.0, 3.5) years. The length of bone defects was 8.35 (6.50, 9.84) cm. Their bone defects were repaired by an individually 3D printed microporous titanium (tantalum) prosthesis after operative removal of osteomyelitis lesions. The wound healing was observed after surgery. The clinical efficacy was comprehensively evaluated by the Paley grading for bone defect healing, visual analog scale (VAS), lower extremity functional scale (LEFS), and imaging examination.Results:The postoperative follow-up period for the 18 patients was (12.2±0.3) months. Wound infection occurred 2 months after surgery in one patient who was treated with Ilizarov bone transfer after removal of the microporous titanium prosthesis. The remaining 17 patients had good postoperative wound healing. At the last follow-up, the 18 patients had a VAS pain score of 2.0(1.0, 4.0) points, significantly lower than the preoperative one [(6.1±2.3) points], and a LEFS score of 54.00(34.50, 69.25) points, significantly higher than the preoperative one [18.50(9.00, 26.50) points] ( P<0.05). At the last follow-up, according to the Paley grading, the bone union was rated as excellent in 16 patients, as good in 1 patient and as poor in 1 patient. The integration of femoral fractures with 3D printed microporous titanium prostheses was fine. Conclusion:In reconstruction of large segmental bone defects caused by lower extremity osteomyelitis, implantation of a 3D printed microporous titanium (tantalum) prosthesis is feasible and effective, not only reducing pain but also restoring the limb function.

BACKGROUND:Bone has bioelectric effects.However,bone defects can lead to loss of endogenous bioelectricity in bone.The implantation of bone tissue engineering scaffolds with bioelectric effect into bone defects will replenish the missing electrical signals and accelerate the repair of bone defects. OBJECTIVE:To introduce the bioelectric effect of bone tissue and expound the repair effect of electrical stimulation on bone defects,summarize the research progress of bioelectric effect applied to bone tissue engineering,in order to provide new ideas for the research of bone tissue engineering. METHODS:Relevant articles were searched on CNKI,WanFang,PubMed,Web of Science and ScienceDirect databases,using"bioelectrical effect,bioelectrical materials,electrical stimulation,bone tissue engineering,bone scaffold,bone defect,bone repair,osteogenesis"as the English and Chinese search terms.Finally,87 articles were included for analysis. RESULTS AND CONCLUSION:(1)Bioelectrical effect combined with ex vivo electrical stimulation to design bone tissue engineering scaffolds is an ideal and feasible approach,and the main materials involved include metallic materials,graphene materials,natural bio-derived materials,and synthetic biomaterial.At present,the most widely used conductive material is graphene material,which benefits from its super conductivity,large specific surface area,good biocompatibility with cells and bones,and excellent mechanical properties.(2)Graphene materials are mainly introduced into the scaffold as modified materials to enhance the conductivity of the overall scaffold,while its large surface area and rich functional groups can promote the loading and release of bioactive substances.(3)However,there are still some major challenges to overcome for bioelectrically effective bone tissue engineering scaffolds:not only electrical conductivity but also the overall performance of the bracket needs to be considered;lack of uniform,standardized preparation of bioelectrically effective bone tissue engineering scaffolds;extracorporeal electrical stimulation intervention systems are not yet mature enough;lack of individualized guidance on stent selection to enable the selection and design of the most appropriate stent for patients with different pathologies.(4)When designing conductive scaffolds,researchers have to deeply consider the comprehensive effects of the scaffolds,such as biocompatibility,mechanical properties,and biodegradability.This combination of properties can be achieved by combining multiple materials.(5)Beyond that,clinical translation should be the ultimate consideration for conductive stent design.On the basis of evaluating the safe current threshold for electrical stimulation to act on the human body and facilitate the repair of bone defects,animal experiments as well as basic experiments are designed and then applied to the clinic to achieve the ultimate goal of applying bioelectrical effect bone tissue engineering scaffolds in the clinic.

Objective To investigate the feasibility of leucocyte-reduced pooled platelet concentrates from whole blood stored at 4℃,and provide theoretical basis for the components preparation.Methods The collected 400 mL ACD-B antico-agulant whole blood was randomly divided into two groups,stored at 4℃and room temperature.The buffy coat was prepared within 6 hours and store at 22℃until next day to prepare leucocyte-reduced pooled platelet concentrates.Platelet samples on day 1,3,5 and 7 were taken for the blood cell count and related parameter detection.The pH,glucose and lactic acid con-tent were determined to reflect the metabolic status,and the thromboelastography,platelet aggregation rate and PAC-1 and CD62P expression were determined to reflect the function and activation of platelets.The difference in platelets between two groups were analyzed.Results With the extension of storage time,the count of leucocyte-reduced pooled platelet concen-trates decreased gradually,but the platelets distribution width(PDW),mean platelet volume(MPV)and platelet-larger cell ratio(P-LCR)increased gradually in two groups,with no statistical significance(P＞0.05).The pH and glucose con-tents in two groups gradually decreased,but the lactic acid content gradually increased,with no significant difference(P＞0.05).The thrombelastogram showed MA value that reflecting platelet function has no significant change during the storage,and there was no significant difference between the two groups(P＞0.05).The aggregation rates decreased while the expres-sion of PAC-1 and CD62P increased gradually with the prolongation of preservation time,with no significant difference be-tween the two groups(P＞0.05).Conclusion There is no significant difference in platelet count,function and activation between whole blood stored at 4℃and at room temperature within 6 hours.Whole blood stored at 4℃within 6 hours can be considered as the raw material for leucocyte-reduced pooled platelet concentrates.

【Objective】 To study and compare the effects of different storage temperature and time on coagulation factor after cryoprecipitated antihemophilic factor(CAF) melting, and to provide reference for the establishment of industry standards. 【Methods】 From June 2021 to May 2023, a total of 96 bags of CAF were sampled in 4 bags per month, and timely detected in the same month. After the CAF was melted in a 37℃ water bath, the mild to moderate lipemic blood was labeled. Each bag of CAF and two 50 mL transfer bags were divided into two bags and two groups of 20 mL each using a sterile adapter. One group was placed in a 4℃ refrigerator and the other in a 22℃ water bath for 0 h, 4 h, 8 h, 12 h, 24 h and 48 h. Then 2 mL of aseptic sample was taken separately and put into the test tube, and 1mL of sample and 3 mL of buffer were added into the other test tube with the sampling gun and mixed on the machine for testing. The experimental data of 60 bags without mild to moderate lipemic blood cryoprecipitation and coagulation factor were randomly selected and statistically analyzed by SPSS21.0. 【Results】 After melting, CAF was stored for 0 h, 4 h, 8 h, 12 h, 24 h and 48 h to detect the average content and growth rate of coagulation factor in the two groups: 1) Storage at 4℃, factor Ⅷ content was 118.62, 111.57(-5.95%), 105.51(-11.05%), 103.30(-12.92%), 94.35(-20.46%) and 83.25(-29.82%) IU/ bag, respectively; Storage at 22℃, the factor Ⅷ content was 118.62, 112.69(-5.00%), 111.41(-6.08%), 109.01(-8.10%), 101.55(-14.39%) and 92.75(-21.81%) IU/ bag, and the storage results of the two groups were compared. At 24 h at 4℃ and 48 h at 22℃, the content of factor Ⅷ had significant statistical significance(P<0.01), and when stored at 22℃, the decay rate of factor Ⅷ was slower; 2) When stored at 4℃, the content of factor V was 41.19, 41.31(0.29%), 40.52(-1.64%), 40.27(-2.23%), 39.05(-5.19%) and 36.99(-10.21%) IU/ bag, respectively; Stored at 22℃, the factor V content was 41.19, 41.71(1.25%), 42.54(3.28%), 41.94(1.80%), 39.21(-4.80%) and 35.64(-13.48%) IU/ bag, respectively. Comparison of storage results between the two groups showed that the content of factor V was statistically significant(P<0.05) and significantly significant(P<0.01) at 4℃48 h and 22℃48 h, respectively, and the decay rate of factor V was faster when stored at 22℃; 3) When stored at 4℃, the Fbg content was 268.86, 268.17(-0.26%), 262.46(-2.38%), 270.50(0.61%), 267.52(-0.50%) and 261.92(-2.58%) mg/ bag, respectively; Stored at 22℃, the Fbg content was 268.86, 265.86(-1.12%), 264.12(-1.77%), 265.89(-1.11%), 266.04(-1.05%) and 261.04(-2.91%) mg/ bag, respectively. There was no statistical significance between the 2 groups and the original 0 h content in each time period(P>0.05). 【Conclusion】 After CAF melting, coagulation factor decreased with the extension of storage time, especially the decrease of factor Ⅷ, followed by factor V, while Fbg basically unchanged. Comparison between the two groups showed that, factor Ⅷ decay rate is slower, factor V decay rate is faster of storage at 22℃. CAF should be transfused as soon as possible after melting. If the delay is unavoidable, for the delay time less than 12 h, storage at 4℃ is recommended, fot the delay time more than 12 h and less than 24 h, storage at 22℃ is recommended.

Objective:To analyze the influencing factors of low liver regeneration in patients with hilar cholangiocarcinoma (HCCA) after portal vein embolization (PVE).Method:Clinical data of 62 patients with HCCA undergoing PVE at Henan Provincial People's Hospital (People's Hospital of Zhengzhou University) from January 2019 to March 2024 were retrospectively analyzed, including 33 males and 29 females, aged (59.1±10.3) years. Patients were divided into two groups based on the median regeneration rate of remnant liver volume (28.6%) three weeks after PVE: low regeneration ( n=31, <28.6%) and high regeneration group ( n=31, ≥28.6%). The proportion of lymph node metastasis, history of alcohol consumption, liver fibrosis, biliary tract infection, alkaline phosphatase (ALP), and tumor necrosis factor-α (TNF-α) were compared between two groups. Multivariate logistic regression analysis was used to indentify the influencing factors of low liver regeneration in patients with HCCA after PVE surgery. Results:The proportion of lymph node metastasis, history of alcohol consumption, liver fibrosis, biliary tract infection, ALP, and level of TNF-α were higher in the low regeneration group than those in the high regeneration group (all P<0.05). Multivariate logistic regression analysis showed that patients with regional lymph node metastasis ( OR=2.561, 95% CI: 1.265-5.185), history of alcohol consumption ( OR=2.616, 95% CI: 1.321-5.181), liver fibrosis ( OR=2.351, 95% CI: 1.265-4.369), biliary tract infection ( OR=2.461, 95% CI: 1.226-4.940), elevated level of ALP ( OR=2.687, 95% CI: 1.351-5.344), and elevated level of TNF-α ( OR=2.781, 95% CI: 1.452-5.326) had an increased risk of low liver regeneration after PVE (all P<0.05). Conclusion:Regional lymph node metastasis, history of alcohol consumption, liver fibrosis, biliary tract infection, and elevated ALP and TNF-α are risk factors for low liver regeneration in patients with HCCA after PVE surgery, which should be noted in clinical practice.

Objective:To explore the relationship between the degree of devascularization and clinical outcomes after interventional embolization and sclerotherapy for peripheral arteriovenous malformations.Method:A retrospective analysis was conducted on the data of 37 patients with peripheral arteriovenous malformations admitted at Department of Cardiovascular Surgery, China-Japan Friendship Hospital from July 2021 to June 2023. All patients received the treatment of "nidus" and/or outflow veins embolization combined with sclerotherapy injection. Two experienced physicians evaluated the degree of devascularization before and after treatment, and conducted a correlation study with clinical outcomes after follow-up.Result:All 37 patients were symptomatic. Swelling and pain accounted for 75.7% of all the cases. Twenty-six patients received only one procedure, 3 patients received re-interventional treatments. The average follow-up time was（13.3±5.0）months. Clinical symptoms were completely relieved in 14 patients, and partial relief in 22 patients. The overall effective rate was 97%. There were 6 patients with degree of de vascularization<50% during procedure, 16 patients with degree of 50%-75%, and 5 patients with degree of 75%-90%, 10 cases with degree over 90%. Patients with devascularization degrees less than 60% can not achieve clinical symptom relief.Conclusions:There is a positive correlation between the degree of devascularization and clinical outcomes in the interventional embolization and sclerotherapy of peripheral arteriovenous malformations, and 60% of the degree of devascularization can serve as the "threshold" for effectiveness of treatment.

Objective:To investigate the effect of carotid endarterectomy(CEA) in the treatment of symptomatic carotid artery near-occlusion(CNO).Methods:Clinical symptoms, imaging examination, treatment and prognosis of 122 symptomatic CNO patients admitted to China-Japan Friendship Hospital from Jan 2014 to Jan 2020 undergoing CEA were retrospectively analyzed. Patients were divided into two groups based on the collapse condition,full collapse group(54 cases) and non-full collapse group(68 cases).Results:The difference was insignificant between the two groups at the 30-day and 12-month occurrence rate of primary endpoints(1.85% vs. 4.41%, P=0.629;7.41% vs. 4.41%, P=0.698).Postoperative re-stenosis occurred in one case in the non-full collapse group 8 months after CEA. Conclusions:CEA can achieve good curative effect for patients with CNO with recurrent symptoms, irrelevant to the existence of distal full collapse. The shunt can prevent intraoperative hypoperfusion and postoperative hyperperfusion.