ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo assess the capacity of health emergency drills for poisoning emergencies at the municipal level in Guangdong Province. Methods A total of 21 municipal teams from cities in Guangdong Province participated in the health emergency drill competition, which included comprehensive tests and practical assessments. Results The pass rate for the total score, comprehensive tests, practical assessments of 21 municipal teams was 66.7%, 33.3%, 66.7%, respectively. The pass rate of the comprehensive tests was lower than that of practical assessments (P<0.01). The pass rate for the total score, comprehensive tests, and practical assessments of team from the Pearl River Delta region was higher than those in non-Pearl River Delta regions (88.9% vs 50.0%, 55.5% vs 16.7%, 88.9% vs 50.0%). For the four comprehensive test items, the highest pass rate was for personal protective principles against chemical poisoning (57.1%). For the five practical assessment items, the highest pass rate was for the selection and matching of personal protective equipment and practice of poisoning detection (both 71.4%). Conclusion It is urgent to improve the capacity of health emergency drills at the municipal level in Guangdong Province. Emphasis should be placed on strengthening capacity building in teams from non-Pearl River Delta regions.

Objective To analyze the registered clinical trials of headache treated by TCM;To discuss the current research status;To provide reference for the optimization of subsequent clinical trial research plans.Methods All clinical trials of headache treated by TCM were retrieved from the ChiCTR and the ClinicalTrials.The retrieval time was from the database establishment to May 22,2023.The general characteristics,study types,intervention measures and outcome indicators of the trials were analyzed respectively.Results A total of 104 registered studies were included,with the number of registered studies increasing since 2004 and reaching a peak in 2020,involving 25 provincial administrative regions or countries and 69 clinical trial institutions;the funding sources were mainly scientific research funds of universities,national finance and local finance.The research type was mainly intervention research;the designing scheme was mainly randomized parallel control study;the high frequency random method was simple random method;45 registered studies used blind methods.Exploratory studies/pre-trials were the most commonly used in the phases of clinical researches.Most of the registered studies were single-center clinical trials with a total sample size of 9 648 patients.The main interventions were acupuncture and oral Chinese medicines.The high frequency outcome indicators included life quality of score,headache attack frequency,headache attack days and headache severity,etc.There were some problems in outcome indicators,such as non-standard,lack of TCM characteristic advantages,and insufficient patient participation.Conclusion The number of registered studies of headache treated by TCM has increased by year,but there are some problems in design elements,such as random method,blind method,number of research centers,sample size and the setting of outcome indicator.

Ankylosing spondylitis (AS) combined with lower cervical fracture is often categorized into unstable fracture, with a high incidence of neurological injury and a high rate of disability and morbidity. As factors such as shoulder occlusion may affect the accuracy of X-ray imaging diagnosis, it is often easily misdiagnosed at the primary diagnosis. Non-operative treatment has complications such as bone nonunion and the possibility of secondary neurological damage, while the timing, access and choice of surgical treatment are still controversial. Currently, there are no clinical practice guidelines for the treatment of AS combined with lower cervical fracture with or without dislocation. To this end, the Spinal Trauma Group of Orthopedics Branch of Chinese Medical Doctor Association organized experts to formulate Clinical guidelines for the treatment of ankylosing spondylitis combined with lower cervical fracture in adults ( version 2024) in accordance with the principles of evidence-based medicine, scientificity and practicality, in which 11 recommendations were put forward in terms of the diagnosis, imaging evaluation, typing and treatment, etc, to provide guidance for the diagnosis and treatment of AS combined with lower cervical fracture.

Objective:To investigate genetic variation profiles of δ-globin (HBD gene) and hematological phenotypes in Guangdong population.Methods:Retrospective case analysis was performed in this study. Blood samples of 11 616 couples who participated in free thalassemia screening in Guangzhou from July 2020 to December 2022 were collected which underwent blood routine tests and hemoglobin (Hb) capillary electrophoresis. According to the results, 154 samples were enrolled in this study: (1)group of 35 cases with HbA 2 <2.0% but no HbF band; (2)group of 64 cases with HbA 2 < 2.0% and HbF band; (3)group of 25 cases with HbA 2 <2.0% and suspected HbA 2 variants; (4) group of 25 cases with HbA 2 ≥2.0% and <3.5% and HbF band, as well as abnormal blood routine report [mean corpuscular volume (MCV) <82 fl and/or mean corpuscular hemoglobin (MCH) <27 pg]; (5)group of 5 cases with HbA 2 ≥2.0% and <3.0% accompanied with β thalassemia gene carriers Sanger sequencing was used to detect single nucleotide variants of δ-globin. Results:(1) A total of 22 genetic variations were detected, including 6 de novo variations, and the top 3 genetic variations were respectively c.-127T>C (57.02%, 65/114), c.-80T>C (9.65%, 11/114), c.349C>T (7.89%, 9/114). (2) In group of patients with HbA 2 <2.0% but no HbF band, 22 cases (62.85%, 22/35) had HBD gene variation, including 7 cases with MCV and MCH lower than reference values, 4 cases with α thalassemia; 13 cases had no HBD gene variation, including 12 cases with lower MCV and MCH. Among 19 cases with abnormal blood routine test results, levels of HbA 2 in patients (7 cases) with HBD gene variation were lower compared with those without HBD gene variation (12 cases) ( P<0.01%). (3)In group of patients with HbA 2<2.0% with HbF band, 59 cases (92.18%, 59/64) had HBD gene variations whose mutations all occurred in promoter region, and the HbF were all lower than 5.0%; 5 cases with HbF >5.0% had no HBD gene variation. (4) In group of patients with HbA 2 <2.0% and suspected HbA 2 variants, the detection rate was 100% (25/25) and δ-globin variants <1.0%. (5) In group of patients with HbA 2 ≥2.0% and <3.5% and HbF band accompanied with abnormal blood routine results, no HBD gene variation was found. (6) In group of 5 patients with HbA 2 ≥2.0% and <3.0% with β thalassemia gene carriers, HBD gene variation were found in all cases, and the level of HbA 2 was (2.62±0.17)% and HbF was (3.62±2.22)%. Conclusions:There are various genotypes of HBD gene variation, among which HBD: c.-127T>C is the most common in Guangdong population in China. Mutations in the promoter region may cause decrease in HbA 2 and increase in HbF which is mostly less than 5% but exceeds 5.0% when combined with β thalassemia. Our study enriched the gene mutation profiles of HBD gene in Guangdong population.

Objective:To analyze the factors affecting delayed chemotherapy in children with Burkitt lymphoma (BL) and their influence on prognosis.Methods:Retrospective cohort study. Clinical data of 591 children aged ≤18 years with BL from May 2017 to December 2022 in China Net Childhood Lymphoma (CNCL) was collected. The patients were treated according to the protocol CNCL-BL-2017. According to the clinical characteristics, therapeutic regimen was divided into group A, group B and group C .Based on whether the total chemotherapy time was delayed, patients were divided into two groups: the delayed chemotherapy group and the non-delayed chemotherapy group. Based on the total delayed time of chemotherapy, patients in group C were divided into non-delayed chemotherapy group, 1-7 days delayed group and more than 7 days delayed group. Relationships between delayed chemotherapy and gender, age, tumor lysis syndrome before chemotherapy, bone marrow involvement, disease group (B/C group), serum lactate dehydrogenase (LDH) > 4 times than normal, grade Ⅲ-Ⅳ myelosuppression after chemotherapy, minimal residual disease in the interim assessment, and severe infection (including severe pneumonia, sepsis, meningitis, chickenpox, etc.) were analyzed. Logistic analysis was used to identify the relevant factors. Kaplan-Meier method was used to analyze the patients' survival information. Log-Rank was used for comparison between groups.Results:Among 591 patients, 504 were males and 87 were females, the follow-up time was 34.8 (18.6,50.1) months. The 3-year overall survival (OS) rate was (92.5±1.1)%,and the 3-year event-free survival (EFS) rate was (90.5±1.2)%. Seventy-three (12.4%) patients were in delayed chemotherapy group and 518 (87.6%) patients were in non-delayed chemotherapy group. The reasons for chemotherapy delay included 72 cases (98.6%) of severe infection, 65 cases (89.0%) of bone marrow suppression, 35 cases (47.9%) of organ dysfunction, 22 cases (30.1%) of tumor lysis syndrome,etc. There were 7 cases of chemotherapy delay in group B, which were seen in COPADM (vincristine+cyclophosphamide+prednisone+daunorubicin+methotrexate+intrathecal injection,4 cases) and CYM (methotrexate+cytarabine+intrathecal injection,3 cases) stages. There were 66 cases of chemotherapy delay in group C, which were common in COPADM (28 cases) and CYVE 1 (low dose cytarabine+high dose cytarabine+etoposide+methotrexate, 12 cases) stages. Multinomial Logistic regression analysis showed that the age over 10 years old ( OR=0.54,95% CI 0.30-0.93), tumor lysis syndrome before chemotherapy ( OR=0.48,95% CI 0.27-0.84) and grade Ⅲ-Ⅳ myelosuppression after chemotherapy ( OR=0.55,95% CI 0.33-0.91)were independent risk factors for chemotherapy delay.The 3-year OS rate and the 3-year EFS rate of children with Burkitt lymphoma in the delayed chemotherapy group were lower than those in the non-delayed chemotherapy group ((79.4±4.9)% vs. (94.2±1.1)%, (80.2±4.8)% vs. (92.0±1.2)%,both P<0.05). The 3-year OS rate of the group C with chemotherapy delay >7 days (42 cases) was lower than that of the group with chemotherapy delay of 1-7 days (22 cases) and the non-delay group (399 cases) ((76.7±6.9)% vs. (81.8±8.2)% vs. (92.7±1.3)%, P=0.002).The 3-year OS rate of the chemotherapy delay group (9 cases) in the COP (vincristine+cyclophosphamide+prednisone) phase was lower than that of the non-chemotherapy delay group (454 cases) ((66.7±15.7)% vs. (91.3±1.4)%, P=0.005). Similarly, the 3-year OS rate of the chemotherapy delay group (11 cases) in the COPADM1 phase was lower than that of the non-chemotherapy delay group (452 cases) ((63.6±14.5)% vs. (91.5±1.3)%, P=0.001). Conclusions:The delayed chemotherapy was related to the age over 10 years old, tumor lysis syndrome before chemotherapy and grade Ⅲ-Ⅳ myelosuppression after chemotherapy in pediatric BL. There is a significant relationship between delayed chemotherapy and prognosis of BL in children.

OBJECTIVE To systematically evaluate the efficacy and safety of the sedative effect of remimazolam in endoscopy and to compare it with propofol and midazolam. METHODS Search PubMed, Embase, Cochrane Library, Wanfang database, CNKI and other databases to collect the literature of randomized controlled trials of remimazolam for sedation in endoscopy. The search period was from 2018 onwards when remimazolam was approved for clinical trials until April 2022. The search strategy included the following variable keywords: remimazolam, gastroscopy, bronchoscopy, and colonoscopy. The quality of the included literature was assessed and the collected data were subjected to meta-analysis by RevMan 5.4 software. RESULTS Ten relevant RCTs involving midazolam and propofol, involving a total of 2 076 patients were included in the analysis. The results showed that the sedative effect of remimazolam was significantly higher than that of midazolam [OR=0.03, 95%CI(0.02, 0.05), I2=0%, P<0.000 01]; but lower than that of propofol [OR=11.32, 95%CI(2.12, 60.56), I2=0%, P=0.005]. The onset time of remimazolam was longer than that of propofol, but shorter than that of midazolam; the recovery time was faster than that of propofol and midazolam. Compared with midazolam, there was no significant difference in the incidence of adverse reactions. Compared with propofol, remimazolam was associated with lower rates of hypotension, slowed heart rate, hypoxemia, and injection pain, but higher risk ratio of nausea, with no difference invomiting. CONCLUSION The sedative effect and onset of action of remimazolam are better than midazolam but less than propofol when used for endoscopy. Wake-up time is faster than that of propofol and midazolam. The incidence of respiratory and circulatory depression is lower with remimazolam than with propofol, and there are no significant differences in adverse effects compared with midazolam.

Objective: To investigate the inhibitory effect of curcumin(Cur) on IL-1β-induced cartilage damage and to study the relationship between the regulatory mechanisms of the DUSP1/p38 MAPK signalling pathway in the above process. Methods: Chondrocytes(C28/I2) and postoperative primary chondrocytes from osteoarthritis patients were divided into control and experimental groups, and the experimental group was treated with different concentrations of Cur(0, 10, 20, 40, 60, 80 μmol/L) after applying the inflammatory induction treatment with IL-1β(10 μg/L). The cell proliferation inhibition rate was determined by cell viability assay(CCK-8), the apoptosis rate was detected by flow cytometry assay. Real-time fluorescence quantitative PCR(qRT-PCR), Western blot, and immunofluorescence assay were used to detect type II collagen α1 chain(Collagen Ⅱ), matrix metallopeptidase 13(MMP13), interleukin-1β(IL-1β), BCL2-related X protein(Bax), B lymphocytoma-2(Bcl-2), dual-specificity phosphatase 1(DUSP1), p38 mitogen-activated protein kinase(p38), and phosphorylated p38 mitogen-activated protein kinase(p-p38) RNA and protein expression levels. The role of the DUSP1/p38 MAPK axis in the inhibition of chondrocyte oxidative stress, apoptosis and inflammation by Cur was further validated using DUSP1 interfering RNA and p38 MAPK pathway inhibitor(SB). Results: Cur significantly inhibited the IL-1β-induced decrease in chondrocyte viability and significantly reduced the levels of oxidative stress, apoptosis, and inflammation in chondrocytes; Cur inhibited the expression of MMP13, IL-1β, Bax, and p-p38 proteins, while the expression of Collagen II, Bcl-2, and DUSP1 proteins significantly increased; IL-1β and interfering RNA silencing DUSP1 activated the p38 pathway, while Cur inhibited the activation of the p38 pathway; the use of p38 MAPK pathway inhibitors reduced cellular inflammation. Conclusion Cur attenuates IL-1β-induced oxidative stress, apoptosis and inflammation in chondrocytes by promoting the expression of DUSP1 protein and inhibiting the activation of p38 MAPK pathway.

Objective To investigate the clinical effect of unilateral percutaneous vertebroplasty(PVP)combined with 3D printing technology for the treatment of thoracolumbar osteoporotic compression fracture.Methods A total of 77 patients with thoracolumbar osteoporotic compression fractures from October 2020 to April 2022 were included in the study,all of which were vertebral body compression fractures caused by trauma.According to different treatment methods,they were di-vided into experimental group and control group.Thirty-two patients used 3D printing technology to improve unilateral transpedicle puncture vertebroplasty in the experimental group,there were 5 males and 27 females,aged from 63 to 91 years old with an average of(77.59±8.75)years old.Forty-five patients were treated with traditional bilateral pedicle puncture vertebroplasty,including 7 males and 38 females,aged from 60 to 88 years old with an average of(74.89±7.37)years old.Operation time,intraoperative C-arm X-ray times,anesthetic dosage,bone cement injection amount,bone cement diffusion good and good rate,complications,vertebral height,kyphotic angle(Cobb angle),visual analogue scale(VAS),Oswestry disability index(ODI)and other indicators were recorded before and after surgery,and statistically analyzed.Results All patients were followed up for 6 to 23 months,with preoperative imaging studies,confirmed for thoracolumbar osteoporosis com-pression fractures,two groups of patients with postoperative complications,no special two groups of patients'age,gender,body mass index(BMI),time were injured,the injured vertebral distribution had no statistical difference(P＞0.05),comparable data.Two groups of patients with bone cement injection,bone cement dispersion rate,preoperative and postoperative vertebral body height,protruding after spine angle(Cobb angle),VAS,ODI had no statistical difference(P＞0.05).The operative time,intra-operative fluoroscopy times and anesthetic dosage were statistically different between the two groups(P＜0.05).Compared with the traditional bilateral puncture group,the modified unilateral puncture group combined with 3D printing technology had shorter operation time,fewer intraoperative fluoroscopy times and less anesthetic dosage.The height of anterior vertebral edge,kyphosis angle(Cobb angle),VAS score and ODI of the affected vertebrae were statistically different between two groups at each time point after surgery(P＜0.05).Conclusion In the treatment of thoracolumbar osteoporotic compression fractures,3D printing technology is used to improve unilateral puncture PVP,which is convenient and simple,less trauma,short operation time,fewer fluoroscopy times,satisfactory distribution of bone cement,vertebral height recovery and kyphotic Angle correction,and good functional improvement.