Objective To compare the mid- and long-term clinical results of mitral valve plasty (MVP) and mitral valve replacement (MVR) in the treatment of functional mitral regurgitation (FMR). Methods Patients with FMR who underwent surgical treatment in the Department of Cardiovascular Surgery of the General Hospital of Northern Theater Command from 2012 to 2021 were collected. The patients who underwent MVP were divided into a MVP group, and those who underwent MVR into a MVR group. The clinical data and mid-term follow-up efficacy of two groups were compared. Results Finally 236 patients were included. There were 100 patients in the MVP group, including 53 males and 47 females, with an average age of (61.80±8.03) years. There were 136 patients in the MVR group, including 72 males and 64 females, with an average age of (61.29±8.97) years. There was no statistical difference in baseline data between the two groups (P＞0.05). There was no statistical difference between the two groups in the extracorporeal circulation time, aortic occlusion time, postoperative hospital and ICU stay, intraoperative blood loss, or hospitalization death (P＞0.05), but the time of mechanical ventilation in the MVP group was significantly shorter than that in the MVR group (P=0.022). The total follow-up rate was 100.0%, the longest follow-up was 10 years, and the average follow-up time was (3.60±2.55) years. There were statistical differences in the left atrial diameter, left ventricular end-diastolic diameter, left ventricular end-systolic diameter and cardiac function between the two groups compared with those before surgery (P<0.05). The postoperative left ventricular ejection fraction in the MVP group was statistically higher than that before surgery (P=0.002), but there was no statistical difference in the MVR group before and after surgery (P=0.658). The left atrial diameter in the MVP group was reduced compared with the MVR group (P=0.026). The recurrence rate of mitral regurgitation in the MVP group was higher than that in the MVR group, and the difference was statistically significant (10.0% vs. 1.5%, P=0.003). There were 14 deaths in the MVP group and 19 in the MVR group. The cumulative survival rate (P=0.605) and cardiovascular events-free survival rate (P=0.875) were not statistically significant between the two groups by Kaplan-Meier survival analysis. Conclusion The safety, and mid- and long-term clinical efficacy of MVP in the treatment of FMR patients are better than MVR, and the left atrial and left ventricular diameters are statistically reduced, and cardiac function is statistically improved. However, the surgeon needs to be well aware of the indications for the MVP procedure to reduce the rate of mitral regurgitation recurrence.

This paper summarizes Professor HAN Mingxiang's clinical experience in treating chronic obstructive pulmonary disease （COPD）. He believes that the key pathomechanism of COPD in the acute exacerbation stage is the invasion of external pathogens triggering latent illness， while lung qi deficiency is the primary mechanism in the stable stage. The core pathological factors throughout disease progression are deficiency， phlegm， and blood stasis. Treatment emphasizes a staged and syndrome-based approach. During the acute exacerbation stage， for wind-cold invading the lung syndrome， the self-formulated Sanzi Wenfei Decoction （三子温肺汤） is used to relieve the exterior， dispel cold， warm the lung， and resolve phlegm. For phlegm-dampness obstructing the lung syndrome， Huatan Jiangqi Fomulation （化痰降气方） is prescribed to warm the lung， transform phlegm， descend qi， and calm wheezing. For phlegm-heat obstructing the lung syndrome， Qingfei Huatan Fomulation （清肺化痰方） is applied to clear heat， resolve phlegm， moisten the lung， and stop coughing. For phlegm and blood stasis interlocking syndrome， Qibai Pingfei Fomulation （芪白平肺方） is used to tonify qi， resolve phlegm， and activate blood circulation to remove stasis. During the stable stage， for lung qi deficiency syndrome， Shenqi Wenfei Decoction （参芪温肺汤） is employed to warm the lung， tonify qi， resolve phlegm， and eliminate turbidity. For lung-spleen qi deficiency syndrome， Shenqi Buzhong Decoction （参芪补中汤） is utilized to strengthen the spleen， tonify qi， and reinforce metal （lung） from earth （spleen）. For lung-kidney deficiency syndrome， Shenqi Tiaoshen Fomulation （参芪调肾方） is prescribed to tonify the lung， warm yang， and regulate kidney function to calm wheezing. These strategies provide insights into the traditional Chinese medicine treatment of COPD.

In recent years, the application of artificial intelligence (AI) in the field of biology has witnessed remarkable advancements. Among these, the most notable achievements have emerged in the domain of protein structure prediction and design, with AlphaFold and related innovations earning the 2024 Nobel Prize in Chemistry. These breakthroughs have transformed our ability to understand protein folding and molecular interactions, marking a pivotal milestone in computational biology. Looking ahead, it is foreseeable that the accurate prediction of various physicochemical properties of proteins—beyond static structure—will become the next critical frontier in this rapidly evolving field. One of the most important protein properties is thermodynamic stability, which refers to a protein’s ability to maintain its native conformation under physiological or stress conditions. Accurate prediction of protein stability, especially upon single-point mutations, plays a vital role in numerous scientific and industrial domains. These include understanding the molecular basis of disease, rational drug design, development of therapeutic proteins, design of more robust industrial enzymes, and engineering of biosensors. Consequently, the ability to reliably forecast the stability changes caused by mutations has broad and transformative implications across biomedical and biotechnological applications. Historically, protein stability was assessed via experimental methods such as differential scanning calorimetry (DSC) and circular dichroism (CD), which, while precise, are time-consuming and resource-intensive. This prompted the development of computational approaches, including empirical energy functions and physics-based simulations. However, these traditional models often fall short in capturing the complex, high-dimensional nature of protein conformational landscapes and mutational effects. Recent advances in machine learning (ML) have significantly improved predictive performance in this area. Early ML models used handcrafted features derived from sequence and structure, whereas modern deep learning models leverage massive datasets and learn representations directly from data. Deep neural networks (DNNs), graph neural networks (GNNs), and attention-based architectures such as transformers have shown particular promise. GNNs, in particular, excel at modeling spatial and topological relationships in molecular structures, making them well-suited for protein modeling tasks. Furthermore, attention mechanisms enable models to dynamically weigh the contribution of specific residues or regions, capturing long-range interactions and allosteric effects. Nevertheless, several key challenges remain. These include the imbalance and scarcity of high-quality experimental datasets, particularly for rare or functionally significant mutations, which can lead to biased or overfitted models. Additionally, the inherently dynamic nature of proteins—their conformational flexibility and context-dependent behavior—is difficult to encode in static structural representations. Current models often rely on a single structure or average conformation, which may overlook important aspects of stability modulation. Efforts are ongoing to incorporate multi-conformational ensembles, molecular dynamics simulations, and physics-informed learning frameworks into predictive models. This paper presents a comprehensive review of the evolution of protein thermodynamic stability prediction techniques, with emphasis on the recent progress enabled by machine learning. It highlights representative datasets, modeling strategies, evaluation benchmarks, and the integration of structural and biochemical features. The aim is to provide researchers with a structured and up-to-date reference, guiding the development of more robust, generalizable, and interpretable models for predicting protein stability changes upon mutation. As the field moves forward, the synergy between data-driven AI methods and domain-specific biological knowledge will be key to unlocking deeper understanding and broader applications of protein engineering.

Umbilical cord mesenchymal stem cells (UC-MSCs) have been widely used in regenerative medicine, but there is limited research on the stability of UC-MSCs formulation during production. This study aims to assess the stability of the cell stock solution and intermediate product throughout the production process, as well as the final product following reconstitution, in order to offer guidance for the manufacturing process and serve as a reference for formulation reconstitution methods. Three batches of cell formulation were produced and stored under low temperature (2-8 ℃) and room temperature (20-26 ℃) during cell stock solution and intermediate product stages. The storage time intervals for cell stock solution were 0, 2, 4, and 6 h, while for intermediate products, the intervals were 0, 1, 2, and 3 h. The evaluation items included visual inspection, viable cell concentration, cell viability, cell surface markers, lymphocyte proliferation inhibition rate, and sterility. Additionally, dilution and culture stability studies were performed after reconstitution of the cell product. The reconstitution diluents included 0.9% sodium chloride injection, 0.9% sodium chloride injection + 1% human serum albumin, and 0.9% sodium chloride injection + 2% human serum albumin, with dilution ratios of 10-fold and 40-fold. The storage time intervals after dilution were 0, 1, 2, 3, and 4 h. The reconstitution culture media included DMEM medium, DMEM + 2% platelet lysate, 0.9% sodium chloride injection, and 0.9% sodium chloride injection + 1% human serum albumin, and the culture duration was 24 h. The evaluation items were viable cell concentration and cell viability. The results showed that the cell stock solution remained stable for up to 6 h under both low temperature (2-8 ℃) and room temperature (20-26 ℃) conditions, while the intermediate product remained stable for up to 3 h under the same conditions. After formulation reconstitution, using sodium chloride injection diluted with 1% or 2% human serum albumin maintained a viability of over 80% within 4 h. It was observed that different dilution factors had an impact on cell viability. After formulation reconstitution, cultivation in medium with 2% platelet lysate resulted in a cell viability of over 80% after 24 h. In conclusion, the stability of cell stock solution within 6 h and intermediate product within 3 h meets the requirements. The addition of 1% or 2% human serum albumin in the reconstitution diluent can better protect the post-reconstitution cell viability.

AIM To determine the contents of aspartic acid,glutamic acid,serine,glycine,threonine,citrulline,arginine,alanine,γ-amino-butyric acid,tyrosine,valine,phenlalanine,isoleucine,ornithine,leucine,lysine and proline in Gualoupi Injection and its intermediates,and to analyze their change laws.METHODS The OPA-FMOC online derivatization analysis was performed on a 45℃ thermostatic Waters XBridge C18 column(4.6 mm×100 mm,3.5 μm),with the mobile phase comprising of phosphate buffer solution-[methanol-acetonitrile-water(45 : 45 : 10)]flowing at 1 mL/min in a gradient elution manner,and the detection wavelengths were set at 262,338 nm.Principal component analysis and heatmap analysis were adopted in chemical pattern recognition for the corresponding intermediates in ten processes of six batches of samples.RESULTS Seventeen amino acids showed good linear relationships within their own ranges(R2>0.998 0),whose average recoveries were 83.4％-119.5％with the RSDs of 0.91％-7.94％.Different batches of samples in the same process were clustered,and the corresponding intermediates in different processed were clustered into three groups.Alcohol precipitation and cation exchange column demonstrated the biggest influences on amino acid composition.CONCLUSION This experiment can provide important references for the critical factors on quality control of Gualoupi Injection,thus ensure the stability and uniformity of final product.

Paroxysmal nocturnal hemoglobinuria (PNH) is an acquired clonal hematopoietic stem cell disease caused by abnormal expression of glycosylphosphatidylinositol (GPI) on the cell membrane due to mutations in the phosphatidylinositol glycan class A(PIGA) gene. It is commonly characterized by intravascular hemolysis, repeated thrombosis, and bone marrow failure, as well as multiple systemic involvement symptoms such as renal dysfunction, pulmonary hypertension, swallowing difficulties, chest pain, abdominal pain, and erectile dysfunction. Due to the rarity of PNH and its strong heterogeneity in clinical manifestations, multidisciplinary collaboration is often required for diagnosis and treatment. Peking Union Medical College Hospital, relying on the rare disease diagnosis and treatment platform, has invited multidisciplinary clinical experts to form a unified opinion on the diagnosis and treatment of PNH, and formulated the Expert Consensus of Multidisciplinary Diagnosis and Treatment for Paroxysmal Nocturnal Hemoglobinuria (2024), with the hope of promoting the standardization of PNH diagnosis and treatment.

Objective Tissue uptake and distribution of nano-/microplastics was studied at a single high dose by gavage in vivo.Methods Fluorescent microspheres (100 nm, 3 μm, and 10 μm) were given once at a dose of 200 mg/(kg·body weight). The fluorescence intensity (FI) in observed organs was measured using the IVIS Spectrum at 0.5, 1, 2, and 4 h after administration. Histopathology was performed to corroborate these findings.Results In the 100 nm group, the FI of the stomach and small intestine were highest at 0.5 h, and the FI of the large intestine, excrement, lung, kidney, liver, and skeletal muscles were highest at 4 h compared with the control group (P < 0.05). In the 3 μm group, the FI only increased in the lung at 2 h (P < 0.05). In the 10 μm group, the FI increased in the large intestine and excrement at 2 h, and in the kidney at 4 h (P < 0.05). The presence of nano-/microplastics in tissues was further verified by histopathology. The peak time of nanoplastic absorption in blood was confirmed.Conclusion Nanoplastics translocated rapidly to observed organs/tissues through blood circulation;however, only small amounts of MPs could penetrate the organs.

Objective To investigate the clinical effect of unilateral percutaneous vertebroplasty(PVP)combined with 3D printing technology for the treatment of thoracolumbar osteoporotic compression fracture.Methods A total of 77 patients with thoracolumbar osteoporotic compression fractures from October 2020 to April 2022 were included in the study,all of which were vertebral body compression fractures caused by trauma.According to different treatment methods,they were di-vided into experimental group and control group.Thirty-two patients used 3D printing technology to improve unilateral transpedicle puncture vertebroplasty in the experimental group,there were 5 males and 27 females,aged from 63 to 91 years old with an average of(77.59±8.75)years old.Forty-five patients were treated with traditional bilateral pedicle puncture vertebroplasty,including 7 males and 38 females,aged from 60 to 88 years old with an average of(74.89±7.37)years old.Operation time,intraoperative C-arm X-ray times,anesthetic dosage,bone cement injection amount,bone cement diffusion good and good rate,complications,vertebral height,kyphotic angle(Cobb angle),visual analogue scale(VAS),Oswestry disability index(ODI)and other indicators were recorded before and after surgery,and statistically analyzed.Results All patients were followed up for 6 to 23 months,with preoperative imaging studies,confirmed for thoracolumbar osteoporosis com-pression fractures,two groups of patients with postoperative complications,no special two groups of patients'age,gender,body mass index(BMI),time were injured,the injured vertebral distribution had no statistical difference(P＞0.05),comparable data.Two groups of patients with bone cement injection,bone cement dispersion rate,preoperative and postoperative vertebral body height,protruding after spine angle(Cobb angle),VAS,ODI had no statistical difference(P＞0.05).The operative time,intra-operative fluoroscopy times and anesthetic dosage were statistically different between the two groups(P＜0.05).Compared with the traditional bilateral puncture group,the modified unilateral puncture group combined with 3D printing technology had shorter operation time,fewer intraoperative fluoroscopy times and less anesthetic dosage.The height of anterior vertebral edge,kyphosis angle(Cobb angle),VAS score and ODI of the affected vertebrae were statistically different between two groups at each time point after surgery(P＜0.05).Conclusion In the treatment of thoracolumbar osteoporotic compression fractures,3D printing technology is used to improve unilateral puncture PVP,which is convenient and simple,less trauma,short operation time,fewer fluoroscopy times,satisfactory distribution of bone cement,vertebral height recovery and kyphotic Angle correction,and good functional improvement.

Objective:To explore the application effect of rotating skin flap in the repair of skin and soft tissue defects in the perineum.Methods:A retrospective analysis was conducted on the data of 9 patients with perineal soft tissue defects treated in the Department of the First Affiliated Hospital, Wenzhou Medical University from January 2022 to March 2024. Among them, 8 cases were soft tissue defects after extensive resection of Paget′s disease in the perineum, and 1 case was soft tissue defects after treatment of severe urethral stricture. The defect area ranged from 4 cm×1.5 cm to 30 cm×35 cm, and all wounds were repaired with rotating skin flaps, For patients with excessive area, rotating skin flaps were used to cover important areas, combined with autologous skin and artificial skin to cover the remaining wounds. Patients with urethral stricture were treated with free oral mucosal reconstruction of the urethra combined with rotational skin flap coverage. The donor site was directly sutured or autologous skin was transplanted.Results:After surgery, the recipient skin flaps of 9 patients survived and the donor area healed. After a follow-up of 9-15 months, the skin flap survived well, with skin color approaching normal, and the donor site wound healed well. Eight patients with Paget′s disease did not show any recurrence, among which one patient with extensive wound expansion had good recovery of the perineal skin flap coverage area, and small-scale chronic ulcers appeared in the skin graft area. The skin flap of the patient with urethral stricture had recovered well, and the shape of the penis was good, without any urethral stricture, urinary fistula, sinus tract, etc.Conclusions:The rotational skin flap has a clear therapeutic effect on perineal soft tissue defects and is suitable for repairing perineal skin and soft tissue defects.

Objective To develop an intelligent model for differential diagnosis of atrioventricular nodal re-entrant tachycardia(AVNRT)and atrioventricular re-entrant tachycardia(AVRT)using 12-lead wearable electrocardiogram devices.Methods A total of 356 samples of 12-lead supraventricular tachycardia(SVT)electrocardiograms recorded by wearable devices were randomly divided into training and validation sets using 5-fold cross validation to establish the intelligent classification model,and 101 patients with the diagnosis of SVT undergoing electrophysiological studies and radiofrequency ablation from October,2021 to March,2023 were selected as the testing set.The changes in electrocardiogram parameters before and during induced tachycardia were compared.Based on multiscale deep neural network,an intelligent diagnosis model for classifying SVT mechanisms was constructed and validated.The 3-lead electrocardiogram signals from Ⅱ,Ⅲ,and V1 were extracted to build new classification models,whose diagnostic efficacy was compared with that of the 12-lead model.Results Of the 101 patients with SVT in the testing set,68 were diagnosed with AVNRT and 33 were diagnosed with AVRT by electrophysiological study.The pre-trained model achieved a high area under the precision-recall curve(0.9492)and F1 score(0.8195)for identifying AVNRT in the validation set.The total F1 scores of the lead Ⅱ,Ⅲ,V1,3-lead and 12-lead intelligent diagnostic models in the testing set were 0.5597,0.6061,0.3419,0.6003 and 0.6136,respectively.Compared with the 12-lead classification model,the lead-Ⅲ model had a net reclassification index improvement of-0.029(P=0.878)and an integrated discrimination index improvement of-0.005(P=0.965).Conclusion The intelligent diagnostic model based on multiscale deep neural network using wearable electrocardiogram devices has an acceptable accuracy for classifying SVT mechanisms.