The accumulation of uremic toxins such as urea nitrogen, blood creatinine, and uric acid of patients with renal failure in vivo would lead to aggravated kidney damage. In this study, coated aldehyde oxy-starch (CAO) was used as an adsorbent to investigate its in vitro adsorption performance on renal failure indexes for urea, indoxyl sulfate (INS), monomethylamine (MMA), dimethylamine (DMA), uric acid (UA), and creatinine (Cr). The effects of variables such as pH, temperature, concentration, dosage, and time on the adsorption capacity of CAO were systematically investigated, employing analytical techniques of high-performance liquid chromatography (HPLC) and gas chromatography (GC). The results revealed that CAO exhibited a strong adsorption capacity for urea, INS, and MMA, alongside a moderate adsorption capacity for DMA, UA, and Cr. The adsorption kinetics and thermodynamic studies indicated that the adsorption of urea and UA by CAO were fitted in pseudo-first-order kinetics, and the adsorption isotherm aligned with the Freundlich adsorption model. The enthalpy change ΔH of urea in adsorption was in the range of 40 to 60 kJ·mol^-1, which demonstrated the presence of strong adsorption force due to the interactions of coordinating groups. The ΔH of UA was greater than 80 kJ·mol^-1, indicating the generation of chemical bonds during the adsorption. Both of them, Gibbs free energy ΔG was less than 0, within the range of -20 to 0 kJ·mol^-1, suggested that the adsorption of urea and UA by CAO occurred spontaneously as physical adsorption process. The adsorption entropy ΔS of urea and UA was > 0, which indicated an increase in entropy throughout the adsorption. The infrared spectroscopygram showed the formation of a chemical bond, specifically the imine bond, following the adsorption of urea by CAO, thereby indicating a chemical reaction during the adsorption. This study elucidates the adsorption mechanism of CAO on various indexes of renal failure, providing a scientific basis for its clinical usage.

Five compounds were isolated and purified from the water extract of Elaeagnus oxycarpa Schlechtend leaf by multi-dimensional reversed-phase preparative liquid chromatographic system based on the separation and enrichment model. Their structures were identified by spectral analysis such as NMR, MS, UV, IR and by comparison with literature information as 2,4(1H,3H)-pyrimidinedione (1), elaeagnussugarester B (2), elaeagnussugarester A (3), elaeagnussugarester C (4), gallic acid (5). Compounds 2-4 are new compounds, compound 1 was isolated from Elaeagnus oxycarpa Schlechtend for the first time. The antioxidant and anti-tyrosinase activities of these compounds were evaluated by using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical method, the 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) free radical method, the potassium ferricyanide reduction method and the colorimetric method with L-tyrosine as substrate. The results showed that compounds 2-5 have good antioxidant activities and inhibitory effect on tyrosinase. Compound 4 exhibited the most strong antioxidant activities, with IC₅₀ = 3.59 ± 0.06 μmol·L^-1 for DPPH free radical scavenging ability, IC₅₀ = 10.04 ± 0.20 μmol·L^-1 for ABTS free radical scavenging ability, and total reduction capacity of compound 4 was better than vitamin C respectively. Compound 3 possessed better inhibitory effect on tyrosinase with IC₅₀ = 0.25 ± 0.06 mmol·L^-1.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

Objective: To evaluate the clinical efficacy of costal cartilage septal-columellar composite grafts in refining nasal tip aesthetics for secondary unilateral cleft lip nasal deformities, and to provide a reference for clinical treatment. Methods: This study has been approved by the institutional medical ethics committee and informed consent was obtained from the patients. A total of 31 patients underwent surgery with a costal cartilage strut-septum complex stent graft. The follow-up period was a minimum of 6 months. Anteroposterior, lateral, and supine photos of the patient were taken before and after the operation. The following measurements were obtained: nasal tip projection (NTP), nasofrontal angle (NFA), nasolabial angle (NLA), nasal tip alar angle (NAA), and nasal tip tangent angle (NTA). Nostril-related indices [nostril area (S), nostril height (h1), nostril width (w), and nasal sill height (h2)]) were measured before and after surgery, and cleft/non-cleft side ratios were calculated. Satisfaction with nasal tip aesthetics was investigated using the visual analogue scale (VAS). All measurements were made using preoperative photographs and the most recent follow-up photographs of the patients. Results The follow-up period ranged from 6 to 49 months, with an average of 28 months. All patients underwent healing Results: The follow-up period ranged from 6 to 49 months, with an average of 28 months. All patients underwent healing by first intention. Compared with preoperative measurements, postoperative NTP (preoperative 0.48 vs. postoperative 0.55), NLA (preoperative 83.98° vs. postoperative 100.80°), and NAA (preoperative 160.30° vs. postoperative 168.40°) were significantly increased (P < 0.05). NFA (preoperative 139.20° vs. postoperative 133.50°, P < 0.05) and NTA (preoperative 43.76° vs. postoperative 35.80°, P = 0.062) were decreased. On the cleft versus non-cleft sides, the ratios of S (preoperative 1.10 vs. postoperative 0.94, P < 0.05), w (preoperative 1.10 vs. postoperative 1.02, P = 0.194), h1 (preoperative 0.71 vs. postoperative 0.90, P < 0.05), and h2 (preoperative 0.53 vs. postoperative 0.79, P = 0.065) were all near 1. Satisfaction with postoperative results was fairly high. Conclusion The costal cartilage strut-septum complex stent can effectively correct the deflection and collapse of the nasal tip in patients with unilateral cleft lip nose deformity. The postoperative long-term effect is relatively stable.

Four novel β-galactoside prodrugs were designed and synthesized from anthraquinones HAQ-OH and AQ-OH in an attempt to use the prodrugs to selectively release superoxide anion (O2−) in cancer cells and to achieve selected anticancer activity by utilizing the Warburg effect and the elevated level of β-galactosidase in certain cancer cells. Cellular assays showed that the prodrugs Gal-HAQ and Gal-AQ selectively inhibited the proliferation and induced apoptosis of ovarian cancer OVCAR-3 cells overexpressing β-galactosidase. Using O2− fluorescent probe, it was found that in OVCAR-3 cells Gal-HAQ and Gal-AQ could time-dependently release O2−, which was essential for their anticancer activity. Furthermore, it was found that Gal-HAQ and Gal-AQ were effective senolytics toward senescent cells overexpressing β-galactosidase without affecting the viability of corresponding non-senescent cells, further confirming the β-galactosidase-dependent cytotoxicity of the prodrugs. In conclusion, Gal-HAQ and Gal-AQ, which release O2− in response to β-galactosidase, are expected to serve as candidate prodrugs targeting cancer cells.

Ferroptosis， a new form of programmed cell death different from apoptosis， necrosis， and autophagy， is closely associated with a variety of physiological and pathological processes. Iron-mediated accumulation of reactive oxygen species is the main inducement of ferroptosis， the mechanism of which is related to intracellular lipid metabolism， iron metabolism， and antioxidant defense pathways. Multiple signaling axes and regulators jointly regulate the occurrence and disruption of ferroptosis. Studies have demonstrated that ferroptosis regulates the growth and proliferation of tumor cells. Inducing ferroptosis in tumor cells can control the growth， metastasis， and multi-drug resistance of tumors. Therefore， the effect and mechanism of ferroptosis on tumor cells have become a hot topic in anti-cancer research. As the research advances， a variety of ferroptosis inducers has been used in the clinical chemotherapy for cancers and demonstrate significant efficacy. Accordingly， the development of ferroptosis-inducing anticancer drugs has become a new research direction for tumor treatment. Some active ingredients such as lycorine， oleanolic acid， dihydroartemisinin， pseudolaric acid B， and ophiopogonin B of Chinese medicines can induce ferroptosis in tumor cells via lipid metabolism， iron metabolism， system X_c^-， and GPX4/GSH to regulate the development of tumors， demonstrating a promising prospect in clinical treatment. Based on the theory of the mechanism of ferroptosis， this paper reviews the research progress in ferroptosis induced by active ingredients of Chinese medicines in tumor cells and describes the metabolic regulatory network of ferroptosis from signaling pathways and regulatory factors， providing new strategies for applying active ingredients of Chinese medicines in the treatment of tumors.

Objective To summarize and analyze the preliminary clinical outcomes of the KokaclipTM transcatheter edge-to-edge mitral valve repair system for severe degenerative mitral regurgitation (DMR). Methods This study was a single-arm, prospective, single-group target value clinical trial that enrolled patients who underwent the KokaclipTM transcatheter edge-to-edge repair (TEER) system for DMR in the Department of Heart Surgery of Guangdong Provincial People's Hospital, Guangdong Cardiovascular Institute from June 2022 to January 2023. Differences in the grade of mitral regurgitation (MR) during the perioperative and follow-up periods were compared, and the incidences of adverse events such as all-cause death, thoracotomy conversion, reoperation, and severe recurrence of MR during the study period were investigated. Results The enrolled patient population consisted of 14 (50.0%) females with a mean age of 70.9±5.4 years. Twenty-eight (100.0%) patients were preoperatively diagnosed with typeⅡ DMR, with a prolapse width of 12.5 (11.0, 16.1) mm, a degree of regurgitation 4+ leading to pulmonary venous reflux, and a New York Heart Association cardiac function class≥Ⅲ. All patients completed the TEER procedure successfully, with immediate postoperative improvement of MR to 0, 1+, and 2+ grade in 2 (7.1%), 21 (75.0%), and 5 (17.9%) patients, respectively. Mitral valve gradient was 2.5 (2.0, 3.0) mm Hg. Deaths, thoracotomy conversion, or device complications such as unileaflet clamping, clip dislodgement, or leaflet injury were negative. Twenty-eight (100.0%) patients completed at least 3-month postoperative follow-up with a median follow-up time of 5.9 (3.6, 6.8) months, during which patients had a mean MR grade of 1.0+ (1.0+, 2.0+) grade and a significant improvement from preoperative values (P<0.001). There was no recurrence of ≥3+ regurgitation, pulmonary venous reflux, reoperation, new-onset mitral stenosis, or major adverse cardiovascular events. Twenty-two (78.6%) patients’ cardiac function improved to classⅠorⅡ. Conclusion The domestic KokaclipTM TEER system has shown excellent preliminary clinical results in selected DMR patients with a high safety profile and significant improvement in MR. Additional large sample volume, prospective, multicenter studies, and long-term follow-up are expected to validate the effectiveness of this system in the future.

italic>Anoectochilus roxburghii liquid (spray, a hospital preparation of Wu Mengchao Hepatobiliary Hospital of Fujian Medical University) has shown a good clinical treatment effect during the COVID-19 pandemic, but its material basis and mechanism of action are still unclear. In this study, network pharmacology and molecular docking methods were used to predict the molecular mechanism of A. roxburghii liquid against COVID-19, and pharmacodynamic experiments in vitro were conducted to study the interaction between the current targets with clear preventive and therapeutic effects and the key components of A. roxburghii liquid. UPLC-MS and database were used to compare and analyze the active ingredients in the liquid, and 17 potential active ingredients with good drug-like properties were screened by in vivo pharmacokinetics process in SwissADME database. SwissTargetPrediction and GeneCards were searched to find 93 common targets. Cytoscape 3.8.2 software was used to construct the "component-target" network map, and the Metascape platform was used for gene function annotation and pathway enrichment analysis. It was found that the extract could regulate the positive response to external stimuli, inflammatory response, cytokine production and other biological processes by binding the active ingredients such as isorhamnetin, kaempferol, luteolin, quercetin and apigenin to the common targets (NOS3, MPO, MMP3, etc.), and play an anti-COVID-19 role. In the angiotensin-converting enzyme 2 (ACE2) activity inhibition assay, it was found that the stock solution of A. roxburghii liquid (for spray), and the supernatant after removing polysaccharides (mainly containing flavonoids) could to some extent inhibit the activity of ACE2. Crucially, in the experiment of 2019-nCOV-S pseudovirus infecting HEK-293T-ACE2 cells, we found that A. roxburghii liquid may exert anti-COVID-19 effects by blocking the binding of SARS-CoV-S protein to ACE2.

Umbilical cord mesenchymal stem cells (UC-MSCs) have been widely used in regenerative medicine, but there is limited research on the stability of UC-MSCs formulation during production. This study aims to assess the stability of the cell stock solution and intermediate product throughout the production process, as well as the final product following reconstitution, in order to offer guidance for the manufacturing process and serve as a reference for formulation reconstitution methods. Three batches of cell formulation were produced and stored under low temperature (2-8 ℃) and room temperature (20-26 ℃) during cell stock solution and intermediate product stages. The storage time intervals for cell stock solution were 0, 2, 4, and 6 h, while for intermediate products, the intervals were 0, 1, 2, and 3 h. The evaluation items included visual inspection, viable cell concentration, cell viability, cell surface markers, lymphocyte proliferation inhibition rate, and sterility. Additionally, dilution and culture stability studies were performed after reconstitution of the cell product. The reconstitution diluents included 0.9% sodium chloride injection, 0.9% sodium chloride injection + 1% human serum albumin, and 0.9% sodium chloride injection + 2% human serum albumin, with dilution ratios of 10-fold and 40-fold. The storage time intervals after dilution were 0, 1, 2, 3, and 4 h. The reconstitution culture media included DMEM medium, DMEM + 2% platelet lysate, 0.9% sodium chloride injection, and 0.9% sodium chloride injection + 1% human serum albumin, and the culture duration was 24 h. The evaluation items were viable cell concentration and cell viability. The results showed that the cell stock solution remained stable for up to 6 h under both low temperature (2-8 ℃) and room temperature (20-26 ℃) conditions, while the intermediate product remained stable for up to 3 h under the same conditions. After formulation reconstitution, using sodium chloride injection diluted with 1% or 2% human serum albumin maintained a viability of over 80% within 4 h. It was observed that different dilution factors had an impact on cell viability. After formulation reconstitution, cultivation in medium with 2% platelet lysate resulted in a cell viability of over 80% after 24 h. In conclusion, the stability of cell stock solution within 6 h and intermediate product within 3 h meets the requirements. The addition of 1% or 2% human serum albumin in the reconstitution diluent can better protect the post-reconstitution cell viability.