Fibro-osseous lesions is a class of diseases with obvious similarities in clinical manifestations and pathological features, which has been attracting the attention of clinicians and pathologists. The latest WHO 2022 Classification (5th edition) included six of these diseases (cemento-osseous dysplasia, segmental odontomaxillary dysplasia, fibrous dysplasia, juvenile trabecular ossifying fibroma, psammomatoid ossifying fibroma and familial gigantiform cementoma) in the " fibro-osseous tumours and dysplasias ", and put forward new ideas on the diagnosis and treatment of these diseases. According to the latest WHO 2022 Classification (5th edition), the clinical and pathological features, diagnosis and differential diagnosis of these six diseases were described.
Humans ; Fibroma, Ossifying/pathology* ; Diagnosis, Differential ; Cementoma/pathology* ; Jaw Neoplasms ; Facial Bones

OBJECTIVE: To verify the consistency between the digital manufacturing simple intraoral Gothic arch-tracing device and the traditional intraoral Gothic arch-tracing device in determining the centric relation of complete dentures restoration. METHODS: Ten outpatients with edentulous jaws were selec-ted, and the centric relation of the patients was determined by digital manufacturing of simple intraoral Gothic arch-tracing device (T1) and traditional intraoral Gothic arch-tracing device (T2); the difference of clinical operation time between the two methods was recorded; the upper and lower edentulous jaw plaster models were scanned with two kinds of centric relation, the Standard Triangle Language (STL) files imported into Geomagic studio software to apply the best fitting of multiple points of the both upper jaw models, the fitted STL files imported into the 3 shape viewer software, and the maximum position deviations of the vertical, labial (buccal) and lingual directions of the mandibular midline area and molar areas in T1 and T2 groups measured. During the clinical complete dentures try-in, we observed whether there was midline deviation in the mouth of T1 group and T2 group, and whether the occlusion of posterior teeth was stable or not. RESULTS: The mean time spent on determining the centric relation of T1 and T2 groups was (41.90±2.64) min, (57.50±2.37) min respectively. Paired t test was conducted in the two groups, P < 0.01 with significant statistical difference; The mean maximum position deviation between T1 group and T2 group of the midline mandibular region in labial lingual direction was (0.32±0.14) mm, that was (0.40±0.23) mm in vertical direction; the mean maximum position deviation of molar area in buccal lingual direction was (0.35±0.23) mm and that was (0.33±0.20) mm in vertical direction. In the vertical and horizontal directions, the maximum position deviation of mandibles between group T1 and group T2 was controlled within 0.5 mm. In the process of clinical complete dentures try-in, there was no deviation from the center line of dentures. There was not warping, swinging and other poor stability phenomena in T1 and T2 groups. CONCLUSION The digital manufacturing of simple intraoral Gothic arch-tracing device can be used to determine the centric relation of complete dentures, which can not only save time of clinical operation, but also ensure the accuracy of the centric relation.
Humans ; Centric Relation ; Jaw Relation Record/methods* ; Denture, Complete ; Mouth, Edentulous ; Jaw, Edentulous

OBJECTIVES: This study aimed to compare the effects of virtual adjustment on occlusal interferences in mandibular posterior single crown and three-unit bridge restorations by using the mandibular movement track and the movement parameters of a virtual articulator. METHODS: Twenty-two participants were recruited. Digital casts of the maxillary and mandibular arches were obtained using an intraoral scanner, and the jaw registration system was used to record the data of the mandibular movement track and the movement parameters of the articulator. Four kinds of restorations with 0.3 mm occlusal interferences were designed with dental design software. In particular, single crowns were designed for teeth 44 and 46, whereas three-unit bridges were designed for teeth 44-46 and 45-47, and the corresponding natural teeth were virtually extracted. Virtual adjustment of the restorations was performed using two dynamic occlusal recordings, namely, the mandibular movement track and the movement parameters of the virtual articulator. A reverse-engineering software was used to measure the root-mean-square of the three-dimensional deviation of the occlusal surfaces between natural teeth and the adjusted restorations. The differences between the two methods of virtual-occlusion adjustment were compared and analyzed. RESULTS: For the same group of restorations, the three-dimensional deviation of the mandibular movement track group were lower than those of the virtual articulator group, and the differences were statistically significant (P<0.05). For the four groups of restorations adjusted by the same method, the three-dimensional deviation of the 46-tooth single crown was the largest and the smallest three-dimensional deviation was that of the 44-tooth single crown. Statistical differences existed between the 44-tooth single crown and the other groups (P<0.05). CONCLUSIONS For the occlusal design of posterior single crown and three-unit bridge, the mandibular movement track could be a more effective approach to virtual occlusal adjustment than the movement parameters of the virtual articulator.
Humans ; Mouth, Edentulous ; Occlusal Adjustment ; Jaw Relation Record ; Dental Articulators ; Software

OBJECTIVE: To compare the operation complexity and accuracy of traditional splint impression technique and impression technique with prefabricated rigid connecting bar system for full-arch implants-supported fixed protheses in vitro. METHODS: Standard mandibular edentulous model with six implant analogs was prepared. The implants were placed at the bone level and multiunit abutments screwed into the implants. Two impression techniques were performed: the traditional splint impression technique was used in the control group, and the rigid connecting bar system was used in the test group. In the control group, impression copings were screwed into the multiunit abutments and connected with autopolymerizing acrylic resin. Open tray impression was fabricated with custom tray and polyether. In the test group, cylinders were screwed into the multiunit abutments. Prefabricated rigid bars with suitable length were selected and connected to the cylinders with small amount of autopolymerizing acrylic resin, and open tray impression was obtained. Impression procedures were repeated 6 times in each group. The working time of the two impression methods were recorded and compared. Analogs were screws into the impressions and gypsum casts were poured. The gypsum casts and the standard model were transferred to stereolithography (STL) files with model scanner. Comparative analysis of the STL files of the gypsum casts and the standard model was carried out and the root mean square (RMS) error value of the gypsum casts of the control and test groups compared with the standard model was recorded. The trueness of the two impression techniques was compared. RESULTS: The work time in the test group was significantly lower than that in the control group and the difference was statistically significant [(984.5±63.3) s vs. (1 478.3±156.2) s, P < 0.05]. Compared with the standard model, the RMS error value of the implant abutments in the test group was (16.9±5.5) μm. The RMS value in the control group was (20.2±8.0) μm. The difference between the two groups was not significant (P>0.05). CONCLUSION The prefabricated rigid connecting bar can save the chair-side work time in implants immediate loading of edentulous jaw and simplify the impression process. The impression accuracy is not significantly different from the traditional impression technology. The impression technique with prefabricated rigid connecting bar system is worthy of clinical application.
Acrylic Resins ; Calcium Sulfate ; Dental Implants ; Dental Impression Materials ; Dental Impression Technique ; Humans ; Jaw, Edentulous ; Models, Dental ; Mouth, Edentulous

Bacterial infection is a common finding in patients, who develop medication-related osteonecrosis of the jaw (MRONJ) by the long-term and/or high-dose use of anti-resorptive agents such as bisphosphonate (BPs). However, pathological role of bacteria in MRONJ development at the early stage remains controversial. Here, we demonstrated that commensal microbiota protects against MRONJ development in the pulp-exposed periapical periodontitis mouse model. C57/BL6 female mice were treated with intragastric broad-spectrum antibiotics for 1 week. Zoledronic acid (ZOL) through intravenous injection and antibiotics in drinking water were administered for throughout the experiment. Pulp was exposed on the left maxillary first molar, then the mice were left for 5 weeks after which bilateral maxillary first molar was extracted and mice were left for additional 3 weeks to heal. All mice were harvested, and cecum, maxilla, and femurs were collected. ONJ development was assessed using μCT and histologic analyses. When antibiotic was treated in mice, these mice had no weight changes, but developed significantly enlarged ceca compared to the control group (CTL mice). Periapical bone resorption prior to the tooth extraction was similarly prevented when treated with antibiotics, which was confirmed by decreased osteoclasts and inflammation. ZOL treatment with pulp exposure significantly increased bone necrosis as determined by empty lacunae and necrotic bone amount. Furthermore, antibiotics treatment could further exacerbate bone necrosis, with increased osteoclast number. Our findings suggest that the commensal microbiome may play protective role, rather than pathological role, in the early stages of MRONJ development.
Animals ; Bisphosphonate-Associated Osteonecrosis of the Jaw/prevention & control* ; Bone Density Conservation Agents ; Diphosphonates ; Female ; Humans ; Mice ; Microbiota ; Periapical Diseases ; Zoledronic Acid

The significant clinical feature of bisphosphonate-related osteonecrosis of the jaw (BRONJ) is the exposure of the necrotic jaw. Other clinical manifestations include jaw pain, swelling, abscess, and skin fistula, which seriously affect the patients' life, and there is no radical cure. Thus, new methods need to be found to prevent the occurrence of BRONJ. Here, a novel nanoparticle, tFNA-KLT, was successfully synthesized by us, in which the nanoparticle tetrahedral framework nucleic acid (tFNA) was used for carrying angiogenic peptide, KLT, and then further enhanced angiogenesis. TFNA-KLT possessed the same characteristics as tFNA, such as simple synthesis, stable structure, and good biocompatibility. Meanwhile, tFNA enhanced the stability of KLT and carried more KLT to interact with endothelial cells. First, it was confirmed that tFNA-KLT had the superior angiogenic ability to tFNA and KLT both in vitro and in vivo. Then we apply tFNA-KLT to the prevention of BRONJ. The results showed that tFNA-KLT can effectively prevent the occurrence of BRONJ by accelerating angiogenesis. In summary, the prepared novel nanoparticle, tFNA-KLT, was firstly synthesized by us. It was also firstly confirmed by us that tFNA-KLT significantly enhanced angiogenesis and can effectively prevent the occurrence of BRONJ by accelerating angiogenesis, thus providing a new avenue for the prevention of BRONJ and a new choice for therapeutic angiogenesis.
Angiogenic Proteins/therapeutic use* ; Bisphosphonate-Associated Osteonecrosis of the Jaw/prevention & control* ; Endothelial Cells ; Humans ; Nanoparticles ; Nucleic Acids/therapeutic use*

Medication-related osteonecrosis of the jaw (MRONJ) is a serious adverse event related to administration of antiresorptive or antiangiogenic medications. With the increasing usage of bone-modifying agents in cancer therapy, the incidence of MRONJ enhanced gradually, which affects the life quality of patients and interferes with cancer therapy. In 2019, Multinational Association of Supportive Care in Cancer (MASCC), International Society of Oral Oncology (ISOO) and American Society of Clinical Oncology (ASCO) convened a multidisciplinary Expert Panel to evaluate the evidence and formulate recommendations on practices in the prevention and management of MRONJ in patients with cancer. The present article made an interpretation of Medication-Related Osteonecrosis of the Jaw: MASCC/ISOO/ASCO Clinical Practice Guideline so as to provide clinicians with diagnostic and therapeutic approaches for cancer patients with MRONJ.
Bisphosphonate-Associated Osteonecrosis of the Jaw/therapy* ; Bone Density Conservation Agents/adverse effects* ; Humans ; Jaw ; Medical Oncology ; Neoplasms/drug therapy* ; Osteonecrosis/chemically induced* ; Quality of Life

Recently, among the edentulous patients who undergo dental implants, the proportion of hypertensive patients remains high, which poses a greater challenge for clinicians to operate and to maintain the therapeutic effect. The present review comprehensively summarized clinical researches about the adverse effects on dental implants, outlined molecular mechanisms of the positive effects of various antihypertensive drugs on bone metabolism, and proposed that clinicians should select preventive strategies during preoperative and intraoperative procedures according to the blood pressure of patients with hypertension.
Alveolar Bone Loss ; Dental Implantation, Endosseous/methods* ; Dental Implants ; Dental Prosthesis, Implant-Supported ; Dental Restoration Failure ; Humans ; Hypertension/surgery* ; Jaw, Edentulous ; Maxilla/surgery* ; Risk Assessment

Objective: To compare the accuracy and retention of denture bases fabricated by injection molding, milling, and three-dimensional (3D) printing fabricating, in order to provide some references for clinical practice. Methods: A maxillary edentulous jaw model made was used to duplicated 10 working casts. The casts were numbered and scanned. The wax pattern was designed by digital ways and conventional methods and then the denture bases were fabricated by injection molding, milling, and 3D printing. The tissue surface of experimental denture base was obtained using a dental laboratory scanner. The deviation between the tissue surface of the fabricated denture bases and the working model was evaluated. A digital force gauge was used to measure the traction force. Results: The milling group [(0.076±0.026) mm] was more accurate than the 3D printing group [(0.117±0.041) mm] (P<0.05) and the injection group [(0.120± 0.025) mm] (P<0.05). The accuracy of 3D printing group and that of injection group were not statistically significant (P>0.05). The milling group [(9.55±2.44) N] demonstrated greater retentive force than 3D printing group [(5.19±0.06) N] and injection molding group [(1.52±0.52) N] (P<0.05). Conclusions: The denture base fabricated by milling was more accurate and showed the greatest retentive force than the other groups. And 3D printing group showed better retentive force than the injection molding group. Both digital manufacturing methods can meet the requirements of clinical application.
Computer-Aided Design ; Denture Bases ; Humans ; Jaw, Edentulous ; Maxilla ; Printing, Three-Dimensional

The use of dynamic navigation technology in edentulous jaw implant restoration can solve many problems associated with traditional edentulous jaw implant restoration. The benefits of dynamic navigation include fine positioning guidance, restoration-guided surgery, good aesthetic results, and the possibility of simultaneous conceptual design and real-time implant guidance, as well as the transition from "blind" to "direct" vision during the implantation. It can guide clinicians and adjust the plan in real time, improve the efficiency of communication between the clinician, technician, and patient throughout the process and so on. The workflow, current clinical application and challenges, accuracy analysis, and limitations of the dynamic navigation technology in the edentulous jaw are discussed in this paper, as well as an outlook on its future development, with the goal of contributing to the clinical development of dynamic navigation-guided implantology in the edentulous jaw.
Humans ; Dental Implantation, Endosseous/methods* ; Dental Implants ; Surgery, Computer-Assisted/methods* ; Esthetics, Dental ; Jaw, Edentulous/surgery* ; Technology