OBJECTIVES: The metabolomics technique of LC-MS/MS combined with data analysis was used to detect changes and differences in metabolic profiles in the vitreous humor of early rat carcasses found in water, and to explore the feasibility of its use for early postmortem submersion interval (PMSI) estimation and the cause of death determination. METHODS: The experimental model was established in natural lake water with 100 SD rats were randomly divided into a drowning group (n=50) and a postmortem (CO₂ suffocation) immediately submersion group (n=50). Vitreous humor was extracted from 10 rats in each group at 0, 6, 12, 18 and 24 h postmortem for metabolomics analyses, of which 8 were used as the training set to build the model, and 2 were used as test set. PCA and PLS multivariate statistical analysis were performed to explore the differences in metabolic profiles among PMSI and causes of death in the training set samples. Then random forest (RF) algorithm was used to screen several biomarkers to establish a model. RESULTS: PCA and PLS analysis showed that the metabolic profiles had time regularity, but no differences were found among different causes of death. Thirteen small molecule biomarkers with good temporal correlation were selected by RF algorithm. A simple PMSI estimation model was constructed based on this indicator set, and the data of the test samples showed the mean absolute error (MAE) of the model was 0.847 h. CONCLUSIONS The 13 metabolic markers screened in the vitreous humor of rat corpses in water had good correlations with the early PMSI. The simplified PMSI estimation model constructed by RF can be used to estimate the PMSI. Additionally, the metabolic profiles of vitreous humor cannot be used for early identification of cause of death in water carcasses.
Animals ; Biomarkers/metabolism* ; Cadaver ; Chromatography, Liquid ; Immersion ; Postmortem Changes ; Rats ; Rats, Sprague-Dawley ; Tandem Mass Spectrometry ; Vitreous Body/metabolism* ; Water/metabolism*

PURPOSE: This study evaluated color stability of Dentca 3D-printed denture teeth, in comparison to color stabilities of four conventional types of denture teeth, upon being immersed in various colorants.MATERIALS AND METHODS: Four types of conventional prefabricated denture teeth (Surpass, GC, Artic 6, Heraeus Kulzer, Premium 6, Heraeus Kulzer, Preference, Candulor), 3D-printed denture teeth (Dentca); and Z250 (Filtek Z250, 3M ESPE) were prepared for testing. The samples were immersed in erythrosine 3%, coffee, cola, and distilled water (DW) at 37℃. Color change (ΔE) was measured by spectrophotometer before immersion and at 7, 14, and 21 days after immersion. One-way analysis of variance was performed along with Tukey's honestly significant difference multiple comparisons test (P<.05).RESULTS: No great difference was observed between the color change of Dentca denture teeth and that of conventional denture teeth in most cases (P>.05). The color change of Dentca denture teeth immersed in erythrosine 3% was greater than that of Surpass (ΔE = 0.67 ± 0.25) after 1 week; Artic 6 (ΔE = 1.44 ± 0.38) and Premium 6 (ΔE = 1.69 ± 0.35) after 2 weeks; and Surpass (ΔE = 1.79 ± 0.49), Artic 6 (ΔE = 2.07 ± 0.21), Premium 6 (ΔE = 2.03 ± 0.75), and Preference (ΔE = 2.01 ± 0.75) after 3 weeks (P<.05).CONCLUSION: A color change was observed in Dentca denture teeth when immersed in some colorants; however, the maximum value of ΔE for Dentca denture teeth was within the clinically acceptable range.
Coffee ; Cola ; Dentures ; Erythrosine ; Immersion ; Printing, Three-Dimensional ; Tooth ; Water

Postmortem interval （PMI） estimation is one of the most important and difficult academic tasks in forensic sciences. Due to the influence of the corpse itself and the water environment, corpses in water have unique corruption phenomenon and laws. Based on the experience of traditional PMI studies of corpses on land, forensic practitioners across the world have proposed a variety of practical methods for estimating postmortem submersion interval （PMSI）. This paper summarizes the literatures related to PMSI in recent years, and introduces methods to infer PMSI according to the phenomenon of corpses, the development of insects, the succession pattern of aquatic organisms, and the changes of other physical and chemical indexes of corpses, in order to provide some reference for the study of PMSI of corpses in water.
Animals ; Autopsy ; Cadaver ; Forensic Medicine ; Immersion ; Postmortem Changes

PURPOSE: To review the clinical features and natural courses of cold urticaria (ColdU) in a tropical country. METHODS: A retrospective chart review was performed of patients who visited Siriraj Urticaria Clinic, Siriraj Hospital, Bangkok, Thailand, and were diagnosed with ColdU between 2007 and 2018. Data on provocation and threshold tests, clinical courses, and laboratory work-up were analyzed and compared with data reported by studies in temperate countries. RESULTS: Of 1,063 chronic urticaria patients, 27 (2.5%) were diagnosed with ColdU, with a mean age of symptom onset of 34.8 years. Half of the patients had a history of atopy, and 1 (3.7%) had a history of anaphylaxis. All patients were positive to 1 of 3 provocation tests: an ice cube test; TempTest 4.0; or a tray filled with ice, salt and water. Thirteen patients underwent the ice cube test, and all had positive results. TempTest was performed on 15 patients, 8 of whom had positive results, with a mean critical temperature threshold (CTT) of 21.0°C. All of the 7 patients who had a negative TempTest result later produced positive results to the immersion of their hand and forearm in a tray filled with ice, salt, and water. All patients were treated with H1-antihistamines, the vast majority (96.3%) being non-sedating H1-antihistamines. Some (14.8%) needed to be administered oral corticosteroids, ciclosporin, or omalizumab. Six patients (22.2%) were in remission. A Kaplan-Meier survival curve demonstrated 5-year and 10-year remission rates of 13.8% and 42.6%, respectively. CONCLUSIONS: The rate of anaphylaxis in patients with ColdU in a tropical country was lower than those reported by other studies conducted intemperate climates. On the other hand, the number of female patients, mean age at symptom onset, atopy rate, rate of concomitant chronic spontaneous urticaria and mean CTT were higher.
Adrenal Cortex Hormones ; Anaphylaxis ; Climate ; Cyclosporine ; Female ; Forearm ; Hand ; Humans ; Ice ; Immersion ; Omalizumab ; Retrospective Studies ; Thailand ; Tropical Climate ; Urticaria ; Water

In this study, a restoration process was developed with potassium hydroxide (KOH), in order to improve each of the structures for their posterior fixation, through the use of new methods such as the Chilean conservative fixative solution (SFCCh), with exceptional results. Restore anatomical pieces corresponding to corpse and organs, being these last set with the SFCCh. In this work dealt with processes of restoration with potassium hydroxide, sodium chloride, and sodium hypochlorite, the process began with the cleanliness and suture of the structures for subsequent fixing in Chilean conservative fixative solution, making use of a corpse and different anatomical parts. Work based on items found in the database, Elsevier, Science Direct, ProQuest, and MEDLINE. At the end of the process of restoration and conservation of the anatomical pieces, was observed an improvement in muscle pigment with decrease of rigidity in the specimen, additionally a recovery of appearance in the vascular-nervous elements was achieved. The organs were much more malleable and the structures facilitate the identification of specific details, its subsequent immersion in SFCCh allows the longer preservation of the obtained results. The restoration with potassium hydroxide allows the improvement in the appearance of the different anatomical structures and simultaneously to facilitate its study. The SFCCh is an alternative that replaces partially the use of formaldehyde. In addition, it presents toxicity reduction.
Cadaver ; Formaldehyde ; Immersion ; Potassium ; Sodium Hydroxide ; Sodium Hypochlorite ; Sutures

The aim of this study was to examine the bioactivity and osseointegration of Ti-6Al-4V alloy implant which was modified by an anodic oxidation and a cyclic precalcification treatments. After blasting treatment using HAp (Hydroxyapatitie; HAp) powder which is resorbable blasting media (RBM) on the surface of Ti-6Al-4V alloy implants, the anodic oxidation treatment and the cyclic precalcification treatment were conducted to form nanotube TiO2 layer and HAp precipitation respectively. The surface morphology of the surface-treated Ti-6Al-4V alloy implant was investigated after immersion in the simulated body fluid(SBF) for 3 days to investigate the bioactivity. To investigate the effect of surface treatment on bonding between the implant and bone, RBM treated implant and RBM-anodization-cyclic precalcification(RACP) treated implant were placed on the distal side of both tibia diaphysis of rats, and then the removal torque of the implant was measured after 4 weeks. On the surface of RACP treated group, bone-like apatite precipitation was observed after immersion in SBF for 3 days. The removal torque was significantly higher in the RACP treated group than in the RBM treated group. The interfacial fracture between the implant and the new bone was observed in the RBM treated group, but both the cohesive fracture at the new bone and the interfacial fractures between the implant and the new bone were observed in the RACP treated group.
Alloys ; Animals ; Diaphyses ; Immersion ; Nanotubes ; Osseointegration ; Rats ; Tibia ; Torque

The calcium phosphate coating on various pretreated metals was prepared by soaking in modified simulated body fluid (m-SBF) solution. The coating structure and its surface morphologies were determined by x-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. The results revealed significant differences in morphology and composition of the calcium phosphate coatings with and without chitosan and NaOH-pretreated commercially pure titanium (cp-Ti) substrate. The calcium phosphates formed on chitosan coated-Ti pretreated with NaOH were ~ 350 nm-sized resulting in strong bonding of the apatite layer with the substrates and a uniform gradient of stress transfer from coating materials to the Ti-substrate. After NaOH pretreatment, the hydroxyl groups bind to Ca²⁺ to attract PO₄³⁻ anions, eventually resulting in a continuous layer of calcium phosphate on chitosan coated-Ti substrate during immersion in m-SBF solution. The chitosan coated-Ti showed hydrophobic surface while NaOH pretreatment resulted in maximum hydrophilicity to the Ti substrate. Due to improved wettability of Ti by NaOH pretreatment before chitosan coating, aggregation of calcium phosphate was prevented and size-controlled composite materials were obtained.
Anions ; Body Fluids ; Calcium Phosphates ; Calcium ; Chitosan ; Clothing ; Hydrophobic and Hydrophilic Interactions ; Immersion ; Metals ; Microscopy, Electron, Scanning ; Spectroscopy, Fourier Transform Infrared ; Titanium ; Wettability ; X-Ray Diffraction

Objective of this study was to compare the color stability, mechanical and chemical properties of three different types of temporary crown resins. Commercially available powder-liquid (Group PL), light-cured (Group LC) and auto-mix syringe (Group AM) types' temporary crown resins were used as experimental groups for each of the evaluation. All the test groups were evaluated after 1 day and 7 days of immersion in various staining solutions. The colors of all groups before and after storage in the staining solutions were measured by a spectrophotometer based on CIE Lab system, and the color differences (ΔE(*)) thereby calculated. Micro hardness test was performed before water storage and aging after 7 days at 37 ℃. In addition, flexural strength, water sorption and solubility tests were performed according to international standard, ISO 10477. All experimental groups showed significant color change in staining solutions when compared to those stored in the control solution (distilled water) (p<0.05). Group PL showed the least color change among the three groups followed by Group AM (p<0.05). This tendency was observed after 7 days of immersion. In terms of the micro hardness test, Group PL showed the highest value among the three groups followed by Group AM (p<0.05). Additionally, the flexural strength decreased in the following order: AM > PL > LC (p<0.05). Water sorption and solubility increased in the following order: AM < PL < LC (p<0.05). The results of this study would provide useful information when choosing temporary crown resin types in various clinical situations.
Aging ; Crowns ; Hardness Tests ; Immersion ; Solubility ; Syringes ; Water

The purpose of this study was to evaluate the color stability of light cured composite resins according to the resin matrices. Three kinds of resin matrices such as Bis-GMA (Venus® Diamond; VD), Silorane (FiltekTM P90; P90), and Ormocer (Admira; Ad) were selected. Each of them were used to prepare 30 specimens. The initial CIE L*a*b* values were measured by means of a Spectrophotometer (NF999, Nippon Denshoku, Japan). For accelerated aging process, the specimens were immersed in a circulating water bath with distilled water at 60℃. Spectrophotometric analyses were made after immersion of 8, 16, 24, 41 days and the color difference (ΔE*) was calculated. The L* value increased compared with initial L* value. VD had the greatest L* value change and Ad had the smallest L* value change (p<0.05). Ad had the greatest a* value change and VD had the smallest a* value change (p<0.05). The b* value of P90 increased steadily in positive value (+)(p<0.05). ΔE* of Ad had the smallest value and that of P90 had the greatest change with time. According to this study, the value of light cured composite resins was increased with water sorption and color of those changed into greenish and yellowish. And according to the evaluation of color stability, Ad with Ormocer as resin matrices had the best color stability with time in oral environment and P90 with Silorane as resin matrices had the lowest color stability with time. And VD had the greatest initial ΔE*.
Aging ; Baths ; Bisphenol A-Glycidyl Methacrylate ; Composite Resins ; Diamond ; Immersion ; Organically Modified Ceramics ; Silorane Resins ; Water

The pH of the oral cavity can dynamically change due to diverse foods and beverages served. The purpose of the present study was to evaluate flexural and compressive properties of composite resins after immersion in solutions of different pHs. Four composite resins were cured and immersed in test solutions of different pHs (3, 7.1, and 9) for 2 weeks. Flexural and compressive properties (strength and modulus) were evaluated using universal test machine. After immersion, initial flexural and compressive strength significantly changed to 1.5–30.0% and 0.3–19.6%, respectively; flexural and compressive modulus significantly changed to 4.4–29.0% and 3.5–21.5%, respectively. However, the values obtained from solutions of different pHs were not significantly and consistently different to each other.
Beverages ; Composite Resins ; Compressive Strength ; Hydrogen-Ion Concentration ; Immersion ; Mouth