Background: Barriers to treatment with intravenous thrombolysis (IVT) for patients with acute ischemic stroke (AIS) in South Korea remain incompletely characterized. We analyze a nationwide prospective cohort to determine patient-level features associated with delayed presentation and non-treatment of potential IVT-eligible patients. Methods: We identified consecutive patients with AIS from 01/2011 to 08/2023 from a multicenter and prospective acute stroke registry in Korea. Patients were defined as IVT candidates if they presented within 4.5 hours from the last known well, had no lab evidence of coagulopathy, and had National Institute of Health Stroke Scale (NIHSS) ≥ 4. Multivariable generalized linear mixed regression models were used to investigate the associations between their characteristics and the IVT candidates or the use of IVT among the candidates. Results: Among 84,103 AIS patients, 41.0% were female, with a mean age of 69 ± 13 years and presentation NIHSS of 4 [interquartile range, 1–8]. Out of these patients, 13,757 (16.4%) were eligible for IVT, of whom 8,179 (59.5%) received IVT. Female sex (adjusted risk ratio [RR], 0.90; 95% confidence interval [CI], 0.86–0.94) and lower years of education (adjusted RR, 0.90; 95% CI, 0.84–0.97 for 0–3 years, compared to ≥ 13 years) were associated with a decreased likelihood of presenting as eligible for IVT after AIS; meanwhile, young age (adjusted RR, 1.12; 95% CI, 1.01–1.24 for ≤ 44 years, compared to 75–84 years) was associated with an increased likelihood of being an IVT candidate. Among those who were eligible for IVT, only age was significantly associated with the use of IVT (adjusted RR, 1.09; 95% CI, 1.03–1.16 for age 65–74 and adjusted RR, 0.83; 95% CI, 0.76–0.90 for ≥ 85 years, respectively). Conclusion Most patients with AIS present outside IVT eligibility in South Korea, and only 60% of eligible patients were ultimately treated. We identified increased age, female sex and lower education as key features on which to focus interventions for improving IVT utilization.

Objective: This study aimed to investigate the prevalence and characteristics of impacted teeth (ITs) in orthodontic patients at university dental hospitals in Korea. Methods: This study included 14,774 patients who visited the Department of Orthodontics at 10 university dental hospitals in Korea between 2020 and 2022 and underwent orthodontic diagnosis. The prevalence and characteristics of ITs were investigated using orthodontic diagnostic records, radiographs, and diagnostic casts. Results: The prevalence of ITs, excluding third molar impaction, in Korean orthodontic patients was 13.6% (n = 2,014).The prevalence of ITs in pediatric orthodontic patients was 24.5% (n = 1,614).Of these patients, 68.2% had one IT, 27.5% had two ITs, 24.3% had bilateral IT, and 75.7% had unilateral IT. The most frequent IT was the maxillary canine (50.1%), followed by the mandibular second molar (11.7%), and maxillary second premolar (9.6%). An abnormal eruption path (46.5%) was the most frequent etiology. Orthodontic traction after surgical exposure (70.6%) was the most frequent treatment option. Among the patients with ITs, 29.8% had other dental anomalies, such as tooth agenesis (8.7%), microdontia (8.0%), and supernumerary teeth (5.1%). Furthermore, 50.8% had complications such as cystic lesions (18.3%), transposition (17.7%), and root resorption (14.8%).Among the patients with maxillary canine impaction, 62.2% had labial maxillary canine impaction and 21.1% had palatal maxillary canine impaction. Conclusions The prevalence of ITs in Korean orthodontic patients at university dental hospitals was high, particularly in pediatric orthodontic patients.

Objective: Using finite element method (FEM) analysis of a clear aligner (CA), this study aimed to investigate the effects of varying the edentulous space on canine distal bodily movement during space closure following maxillary first premolar extraction. Methods: FEM analysis was used to simulate distal canine bodily movement following maxillary first premolar extraction using CAs. Four CA designs for edentulous spaces were compared: no-pontic, full-pontic, halfpontic, and beam. Three-dimensional models of the tooth components and CA were created. The target was set at a 0.25-mm distal canine movement. Long-term tooth movement was simulated using an iterative calculation method. Results: All the groups initially showed crown displacement, distal tipping, and distal rotation.Over time, the movement patterns differed in relation to the design. The no-pontic design exhibited the greatest displacement and tipping. The beam design exhibited the largest initial displacement but showed the lowest displacement and tipping thereafter. Full- and half-pontic designs yielded intermediate results. Significant force reduction was observed immediately after CA application, and was followed by a gradual decrease. The mean tooth-movement achievement rate was approximately 76.7%. Conclusions The edentulous space design of the CA substantially affected tooth-movement behavior. An iterative simulation is necessary to evaluate longterm tooth-movement patterns. The beam design demonstrated optimal suitability for bodily movement with minimal tipping. For optimal results, additional setup or overcorrection may be necessary.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Purpose: Emphysematous pyelonephritis (EPN) is a life-threatening disease requiring immediate treatment. This multicenter retrospective cohort study aimed to analyze the mortality rate and risk factors associated with EPN. Materials and Methods: Between January 2011 and February 2021, 217 patients diagnosed with EPN via computed tomography who visited 14 teaching hospitals were retrospectively analyzed. Clinical data, including age, sex, comorbidities, Huang and Tseng classification, hydronephrosis, acute kidney injury, blood and urine tests, surgical interventions, percutaneous drainage, and conservative treatments, were compared between the survival and death groups. Risk factors for mortality due to EPN were analyzed using univariate and multivariate methods. Results: The mean age of survivors and deceased patients was 67.8 and 69.0 years, respectively (p=0.136). The sex distribution (male/female) was 48/146 and 8/15, respectively (p=0.298). Of the 217 patients, 23 died, resulting in a mortality rate of 10.6%. In univariate analysis, the Huang and Tseng classification (p=0.004), platelet count (p=0.005), and acute kidney injury (p=0.007) were significantly associated with mortality from EPN. In multivariate analysis, only the Huang and Tseng classification (p=0.029) was identified as a risk factor. Mortality rates according to the Huang and Tseng classification were as follows: class I (5.88%), class II (7.50%), class IIIa (14.28%), class IIIb (25.00%), and class IV (23.07%). Conclusions EPN is associated with a high mortality rate. Among various clinical factors, the Huang and Tseng classification was the most significant indicator for predicting mortality.

Purpose: It is well known that the majority of the extranodal marginal zone lymphomas of mucosa-associated lymphoid tissues (MALT lymphomas) are associated with microbiota, e.g., gastric MALT lymphoma with Helicobacter pylori. In general, they are very sensitive to low-dose radiotherapy and chemotherapeutic agents. The microbiota profile is not clearly elucidated in bronchus-associated lymphoid tissue (BALT) lymphoma, a rare type of MALT lymphoma in the lung. Thus, this study aimed to clarify the intratumor microbiome in BALT lymphoma using the third-generation next-generation sequencing (NGS) method. Materials and Methods: DNAs were extracted from 12 formalin-fixed paraffin-embedded (FFPE) tumor tissues obtained from BALT lymphoma patients diagnosed between 1990 and 2016. 16S rRNA gene was amplified by polymerase chain reaction. Amplicons were sequenced using a Nanopore platform. Next-generation sequencing analysis was performed to assess microbial profiles. For comparison, FFPE specimens from nine non-cancerous lung tissues were also analyzed. Results: Specific bacterial families including Burkholderiaceae, Bacillaceae, and Microbacteriaceae were associated with BALT lymphoma by a linear discriminant analysis effect size approach. Although the number of specimens was limited, BALT lymphomas exhibited significantly higher microbial abundance and diversity with distinct microbial composition patterns and correlation networks than non-cancerous lung tissues. Conclusion This study provides the first insight into intratumor microbiome in BALT lymphoma using the third-generation NGS method. A distinct microbial composition suggests the presence of a unique tumor microenvironment of BALT lymphoma.

Background: Commuting is essential for working life; however, prolonged travel times can negatively affect health, particularly musculoskeletal pain. This study aims to examine the relationship between commuting time and musculoskeletal pain (back, upper extremity, and lower extremity pain), in the context of working time. Methods: This cross-sectional study used data from the Sixth Korean Working Conditions Survey conducted in Korea between October 2020 and April 2021. Variables such as commuting time, weekly working hours, and shift work were assessed using the survey questions. Musculoskeletal pain was determined based on self-reported pains in the previous year. The covariates included demographics, employment status, ergonomic risks, and job stress. The association between commuting time and musculoskeletal pain stratified by weekly working hours or shift work was analyzed by survey-weighted logistic regression analysis. Results: This study found a significant association between longer commuting times and increased prevalence of musculoskeletal pain, particularly back, upper extremity, and lower extremity pain. When commuting time was ≤60, 61–120, >120 minutes, the odds ratio was 1.00, 1.33 (95% confidence interval [CI]: 1.16–1.52), and 2.41 (95% CI: 1.77–3.29) for back pain; 1.00, 1.29 (95% CI: 1.13–1.46), and 2.27 (95% CI: 1.71–3.00) for upper extremity pain; and 1.00, 1.24 (95% CI: 1.05–1.45), and 1.53 (95% CI: 1.13–2.08) for lower extremity pain, respectively. Furthermore, except for upper extremity pain, this trend was amplified when participants were concurrently exposed to long working hours, and for lower extremity pain, this trend was aggravated among shift workers. Conclusions Long commuting time may be a risk factor for musculoskeletal pain, and its’ effects could be aggravated when combined with long working hours or shift work. This study observed the detrimental impact of prolonged commuting on musculoskeletal health, particularly among employees with extended working hours or shift work.

Objective: This study aimed to investigate the prevalence and characteristics of impacted teeth (ITs) in orthodontic patients at university dental hospitals in Korea. Methods: This study included 14,774 patients who visited the Department of Orthodontics at 10 university dental hospitals in Korea between 2020 and 2022 and underwent orthodontic diagnosis. The prevalence and characteristics of ITs were investigated using orthodontic diagnostic records, radiographs, and diagnostic casts. Results: The prevalence of ITs, excluding third molar impaction, in Korean orthodontic patients was 13.6% (n = 2,014).The prevalence of ITs in pediatric orthodontic patients was 24.5% (n = 1,614).Of these patients, 68.2% had one IT, 27.5% had two ITs, 24.3% had bilateral IT, and 75.7% had unilateral IT. The most frequent IT was the maxillary canine (50.1%), followed by the mandibular second molar (11.7%), and maxillary second premolar (9.6%). An abnormal eruption path (46.5%) was the most frequent etiology. Orthodontic traction after surgical exposure (70.6%) was the most frequent treatment option. Among the patients with ITs, 29.8% had other dental anomalies, such as tooth agenesis (8.7%), microdontia (8.0%), and supernumerary teeth (5.1%). Furthermore, 50.8% had complications such as cystic lesions (18.3%), transposition (17.7%), and root resorption (14.8%).Among the patients with maxillary canine impaction, 62.2% had labial maxillary canine impaction and 21.1% had palatal maxillary canine impaction. Conclusions The prevalence of ITs in Korean orthodontic patients at university dental hospitals was high, particularly in pediatric orthodontic patients.

Objective: Using finite element method (FEM) analysis of a clear aligner (CA), this study aimed to investigate the effects of varying the edentulous space on canine distal bodily movement during space closure following maxillary first premolar extraction. Methods: FEM analysis was used to simulate distal canine bodily movement following maxillary first premolar extraction using CAs. Four CA designs for edentulous spaces were compared: no-pontic, full-pontic, halfpontic, and beam. Three-dimensional models of the tooth components and CA were created. The target was set at a 0.25-mm distal canine movement. Long-term tooth movement was simulated using an iterative calculation method. Results: All the groups initially showed crown displacement, distal tipping, and distal rotation.Over time, the movement patterns differed in relation to the design. The no-pontic design exhibited the greatest displacement and tipping. The beam design exhibited the largest initial displacement but showed the lowest displacement and tipping thereafter. Full- and half-pontic designs yielded intermediate results. Significant force reduction was observed immediately after CA application, and was followed by a gradual decrease. The mean tooth-movement achievement rate was approximately 76.7%. Conclusions The edentulous space design of the CA substantially affected tooth-movement behavior. An iterative simulation is necessary to evaluate longterm tooth-movement patterns. The beam design demonstrated optimal suitability for bodily movement with minimal tipping. For optimal results, additional setup or overcorrection may be necessary.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.