This study explored the evolving trends in pediatric dentistry research, focusing on the changes in research trends in the Journal of the Korean Academy of Pediatric Dentistry (JKAPD) and comparing them with those in other international journals and previous studies. We selected the JKAPD (Korea), Pediatric Dentistry (PD, USA), European Archives of Paediatric Dentistry (EAPD, Europe), and The Japanese Journal of Pediatric Dentistry (JJPD, Japan) as subjects for this study, as each one is considered the core academic journals of the corresponding region. Data from the four journals were collected by reviewing articles published over 20 years from 2004 to 2023. Sixteen classification criteria were established, and 4,231 papers were assigned a classification number. This study included 1,205 studies from the JKAPD, 1,320 from the PD, 1,070 from the EAPD, and 636 from the JJPD. Publication trends were similar across the pediatric dental journals; however, the JJPD showed no correlation with other journals. Dental caries and prevention of dental caries were the most published topics in all journals (15.4%), followed by systemic diseases or patients with special health care needs (9.9%), conservative treatment and restorative materials (9.2%), and dental growth and developmental disturbances (8.8%). The thematic distribution of articles in the JKAPD observed in this study is consistent with that of previous studies. Although there were regional variations, the distribution of publication trends did not significantly change before or after the 21st century. This study offers valuable insights for comparing and analyzing trends in domestic and international research and providing an opportunity to examine which social and environmental changes have influenced these trends.

This study investigated the plaque removal efficacy of a suction-type sonic toothbrush compared to a conventional manual toothbrush in preschool children aged 30 to 59 months. Using a randomized, double-blind, crossover design with a 2-week washout period, 20 pediatric participants were allocated to two study phases, each using either the suction-type sonic toothbrush or the manual toothbrush with caregiver assistance. The plaque removal effectiveness was assessed through the Silness and Löe plaque index and quantitative light-induced fluorescence values, including ΔR30 and ΔR120 indicators of plaque index. The result showed no statistically significant differences in plaque removal efficacy between the two toothbrushes, although both showed similar improvements. Caregiver feedback revealed high acceptability of the suction-type sonic toothbrush due to its convenience and engaging features, such as a light and suction function, which enhanced the tooth brushing experience. Although limited by the short follow-up period and small sample size, the findings suggest that suction-type sonic toothbrushes may offer practical benefits for young children requiring caregiver assistance.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Background: Small cell lung cancer (SCLC) is called ‘smoker’s disease’ because it is strongly associated with smoking and most cases occur in smokers. However, it can also occur in never smokers. We investigated the clinical features of never smokers with SCLC and compared their treatment outcomes with those of smokers with SCLC. Methods: We retrospectively reviewed the clinical data of patients who had proven SCLC and had received chemotherapy at a single cancer center between July 2002 and April 2021. Results: Of 1,643 patients, 1,416 (86.2%) were enrolled in this study. A total of 162 (11.4%) and 1,254 (88.6%) patients were never smokers and smokers, respectively. There were more female never smokers than smokers (n=130; 80.2% vs. 79, 6.3%, p=0.000), and the incidence of ischemic heart disease was lower among never smokers than among smokers (4/1,416, [2.5%] vs. 83/1,416 [6.6%], p=0.036). Never smokers showed less symptoms at diagnosis than smokers (80.9% vs. 87.2%, p=0.037); however, they showed more toxicity after first-line treatment (61.7% vs. 47.8%, p=0.001). The objective response rate (ORR) was significantly higher in never smokers (74.1% vs. 59.6%, p=0.000). In the multivariate analysis, never smoking and second-line treatment were associated with a better ORR. However, progression-free survival and overall survival were not significantly different between never smokers and smokers. Conclusion In conclusion, never smokers accounted for 11.4% of patients with SCLC. They had distinguishing clinical characteristics and showed better chemotherapeutic responses than smokers.

Purpose: Adjuvant treatment for craniopharyngioma after surgery is controversial. Adjuvant external beam radiation therapy (EBRT) can increase the risk of long-term sequelae. Stereotactic radiosurgery (SRS) is used to reduce treatment-related toxicity.In this study, we compared the treatment outcomes and toxicities of adjuvant therapies for craniopharyngioma. Materials and Methods: We analyzed patients who underwent craniopharyngioma tumor removal between 2000 and 2017. Of the 153 patients, 27 and 20 received adjuvant fractionated EBRT and SRS, respectively. We compared the local control (LC), progression-free survival (PFS), and overall survival between groups that received adjuvant fractionated EBRT, SRS, and surveillance. Results: The median follow-up period was 77.7 months. For SRS and surveillance, the 10-year LC was 57.2% and 57.4%, respectively. No local progression was observed after adjuvant fractionated EBRT. One patient in the adjuvant fractionated EBRT group died owing to glioma 94 months after receiving radiotherapy (10-year PFS: 80%). The 10-year PFS was 43.6% and 50.7% in the SRS and surveillance groups, respectively. The treatment outcomes significantly differed according to adjuvant treatment in nongross total resection (GTR) patients. Additional treatment-related toxicity was comparable in the adjuvant fractionated EBRT and other groups. Conclusion Adjuvant fractionated EBRT could be effective in controlling local failure, especially in patients with non-GTR, while maintaining acceptable treatment-related toxicity.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Background: Small cell lung cancer (SCLC) is called ‘smoker’s disease’ because it is strongly associated with smoking and most cases occur in smokers. However, it can also occur in never smokers. We investigated the clinical features of never smokers with SCLC and compared their treatment outcomes with those of smokers with SCLC. Methods: We retrospectively reviewed the clinical data of patients who had proven SCLC and had received chemotherapy at a single cancer center between July 2002 and April 2021. Results: Of 1,643 patients, 1,416 (86.2%) were enrolled in this study. A total of 162 (11.4%) and 1,254 (88.6%) patients were never smokers and smokers, respectively. There were more female never smokers than smokers (n=130; 80.2% vs. 79, 6.3%, p=0.000), and the incidence of ischemic heart disease was lower among never smokers than among smokers (4/1,416, [2.5%] vs. 83/1,416 [6.6%], p=0.036). Never smokers showed less symptoms at diagnosis than smokers (80.9% vs. 87.2%, p=0.037); however, they showed more toxicity after first-line treatment (61.7% vs. 47.8%, p=0.001). The objective response rate (ORR) was significantly higher in never smokers (74.1% vs. 59.6%, p=0.000). In the multivariate analysis, never smoking and second-line treatment were associated with a better ORR. However, progression-free survival and overall survival were not significantly different between never smokers and smokers. Conclusion In conclusion, never smokers accounted for 11.4% of patients with SCLC. They had distinguishing clinical characteristics and showed better chemotherapeutic responses than smokers.

Purpose: Adjuvant treatment for craniopharyngioma after surgery is controversial. Adjuvant external beam radiation therapy (EBRT) can increase the risk of long-term sequelae. Stereotactic radiosurgery (SRS) is used to reduce treatment-related toxicity.In this study, we compared the treatment outcomes and toxicities of adjuvant therapies for craniopharyngioma. Materials and Methods: We analyzed patients who underwent craniopharyngioma tumor removal between 2000 and 2017. Of the 153 patients, 27 and 20 received adjuvant fractionated EBRT and SRS, respectively. We compared the local control (LC), progression-free survival (PFS), and overall survival between groups that received adjuvant fractionated EBRT, SRS, and surveillance. Results: The median follow-up period was 77.7 months. For SRS and surveillance, the 10-year LC was 57.2% and 57.4%, respectively. No local progression was observed after adjuvant fractionated EBRT. One patient in the adjuvant fractionated EBRT group died owing to glioma 94 months after receiving radiotherapy (10-year PFS: 80%). The 10-year PFS was 43.6% and 50.7% in the SRS and surveillance groups, respectively. The treatment outcomes significantly differed according to adjuvant treatment in nongross total resection (GTR) patients. Additional treatment-related toxicity was comparable in the adjuvant fractionated EBRT and other groups. Conclusion Adjuvant fractionated EBRT could be effective in controlling local failure, especially in patients with non-GTR, while maintaining acceptable treatment-related toxicity.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Background: Small cell lung cancer (SCLC) is called ‘smoker’s disease’ because it is strongly associated with smoking and most cases occur in smokers. However, it can also occur in never smokers. We investigated the clinical features of never smokers with SCLC and compared their treatment outcomes with those of smokers with SCLC. Methods: We retrospectively reviewed the clinical data of patients who had proven SCLC and had received chemotherapy at a single cancer center between July 2002 and April 2021. Results: Of 1,643 patients, 1,416 (86.2%) were enrolled in this study. A total of 162 (11.4%) and 1,254 (88.6%) patients were never smokers and smokers, respectively. There were more female never smokers than smokers (n=130; 80.2% vs. 79, 6.3%, p=0.000), and the incidence of ischemic heart disease was lower among never smokers than among smokers (4/1,416, [2.5%] vs. 83/1,416 [6.6%], p=0.036). Never smokers showed less symptoms at diagnosis than smokers (80.9% vs. 87.2%, p=0.037); however, they showed more toxicity after first-line treatment (61.7% vs. 47.8%, p=0.001). The objective response rate (ORR) was significantly higher in never smokers (74.1% vs. 59.6%, p=0.000). In the multivariate analysis, never smoking and second-line treatment were associated with a better ORR. However, progression-free survival and overall survival were not significantly different between never smokers and smokers. Conclusion In conclusion, never smokers accounted for 11.4% of patients with SCLC. They had distinguishing clinical characteristics and showed better chemotherapeutic responses than smokers.