The purpose of the present study was to investigate the relationship of the classification of traditional Chinese medicine(TCM) materials with the suitable binder concentration and dosage in the preparation of personalized water-paste pills and establish a model for predicting the binder concentration and dosage. Five representative TCM materials were selected, followed by mixture uniform design. The water-paste pills were prepared by extrusion and spheronization with hypromellose E5(HPMC E5) as the binder. The quality of intermediates and final products was evaluated, and the resulting data were subjected to multivariate statistical analysis. The prediction models for binder concentration and dosage were established as follows: binder concentration: Y_1=0.378 6 + 0.570 1X_A + 2.271 2X_B-0.894 5X_C-0.458 2X_D-1.145 4X_E(when Y_1 < 0, 10% HPMC E5 was required; when Y_1 > 0, 20% HPMC E5 was required), with the accuracy reaching up to 100%; binder dosage: Y_2=32.38 + 0.25X_A + 1.85X_B-0.013X_B~2-0.002 5X_C~2(R~2=0.932 6, P < 0.001). The results showed that the binder concentration and dosage were correlated positively with the proportion of fiber material but negatively with the proportions of sugar material and brittle material. Then the validation experiments were conducted with the prediction models and all the prescriptions could be successfully prepared at one time. These demonstrated that following the classification of TCM materials and the calculation of their proportions in the prescription, the established mathematical model could be adopted for predicting the binder concentration and dosage required in the preparation of personalized water-paste pills, which contributed to reducing the pre-formulation research and guiding the actual production of personalized water-paste pills.
Drugs, Chinese Herbal ; Excipients ; Hypromellose Derivatives ; Medicine, Chinese Traditional ; Water

Hydroxypropyl methylcellulose (HPMC) propels self-emulsifying drug delivery systems (SEDDS) to achieve the supersaturated state in gastrointestinal tract, which possesses important significance to enhance oral absorption for poorly water-soluble drugs. This study investigated capacities and mechanisms of HPMC with different viscosities (K4M, K15M and K100M) to inhibit drug precipitation of SEDDS in the simulated gastrointestinal tract environment in vitro. The results showed that HPMC inhibited drug precipitation during the dispersion of SEDDS under gastric conditions by inhibiting the formation of crystal nucleus and the growth of crystals. HPMC had evident effects on the rate of SEDDS lipolysis and benefited the distribution of drug molecules across into the aqueous phase and the decrease of drug sediment. The mechanisms were related to the formed network of HPMC and its viscosities and molecular weight. These results offered a reference for selecting appropriate type of HPMC as the precipitation inhibitor of supersaturatable SEDDS.
Caprylates ; chemistry ; Chemical Precipitation ; drug effects ; Crystallization ; Drug Delivery Systems ; methods ; Emulsifying Agents ; chemistry ; Emulsions ; Ethylene Glycols ; chemistry ; Glycerides ; chemistry ; Hypromellose Derivatives ; administration & dosage ; chemistry ; pharmacology ; Indomethacin ; administration & dosage ; chemistry ; Lipolysis ; drug effects ; Molecular Weight ; Polyethylene Glycols ; chemistry ; Viscosity

Poloxamer F127, poloxamer F68 and hydroxypropyl methylcellulose K4M were used to prepare the thermosensitive in situ gel of boanmycin hydrochloride for injection. Its gelation temperature, rheological behavior, texture characteristics, scanning electron microscopy, in vitro and in vivo drug release were evaluated. These results showed that the formulation was a fluid solution at room temperature, which could become semisolid at the temperature of 37 degrees C, and the thermally induced sol-gel transition allowed to be injectable and in situ setting. The formulation was constructed into a tridimensional network at gelation temperature. The drug release was controlled by the diffusion of the drug and the erosion of the gelmatrix. The pharmacokinetics indicated that the drug could be released slowly for up to 48 hours after subcutaneous administration in rats.
Animals ; Antibiotics, Antineoplastic ; administration & dosage ; pharmacokinetics ; Bleomycin ; administration & dosage ; analogs & derivatives ; pharmacokinetics ; Diffusion ; Drug Delivery Systems ; Gels ; Hypromellose Derivatives ; Injections, Subcutaneous ; Male ; Methylcellulose ; analogs & derivatives ; chemistry ; Microscopy, Electron, Scanning ; Poloxamer ; chemistry ; Rats ; Rats, Sprague-Dawley ; Rheology ; Temperature ; Viscosity

This paper report the development of a new dosage form - self-microemulsifying mouth dissolving films, which can improve the oral bioavailability of water insoluble drugs and have good compliance. A three factor, three-level Box-Behnken design was used for optimizing formulation, investigated the effect of amounts of microcrystalline cellulose, low-substituted hydroxypropyl cellulose and hypromellose on the weight, disintegration time, cumulative release of indomethacin after 2 min, microemulsified particle size and stretchability. Optimized self-microemulsifying mouth dissolving films could fast disintegrate in (17.09 +/- 0.72) s; obtain microemulsified particle size at (28.81 +/- 3.26) nm; and release in vitro at 2 min to (66.18 +/- 1.94)%. Self-microemulsifying mouth dissolving films with broad application prospects have good compliance, strong tensile and can be released rapidly in the mouth through fast self-microemulsifying.
Administration, Oral ; Biological Availability ; Cellulose ; analogs & derivatives ; chemistry ; Drug Compounding ; methods ; Drug Delivery Systems ; methods ; Emulsifying Agents ; chemistry ; Emulsions ; Hypromellose Derivatives ; Indomethacin ; administration & dosage ; Methylcellulose ; analogs & derivatives ; chemistry ; Particle Size ; Solubility ; Surface Properties ; Tensile Strength

Pure and drug hydrophilic matrix tablets were prepared by direct compression method with theophylline as a model drug. The characteristics of four hydrophilic matrix polymers, hydroxypropylmethylcellulose (HPMC), polyethylene oxide (PEO), sodium alginate (NaAlg) and xanthan gum (XG), were compared by investigating the water absorption, swelling, erosion and gel layer strength. The sequence of water absorption rate was XG > NaAlg (H) > PEO > NaAlg (L) > HPMC; The sequence of swelling index was XG > PEO > HPMC > NaAlg; The sequence of erosion rate was NaAlg (L) > NaAlg (H) > PEO80 > PEO200 > PEO300 > XG approximately PEO400 approximately K4M > K15M > PEO600 approximately K100M; The sequence of the gel layer strength was PEO > HPMC > XG > NaAlg. For the PEO and HPMC matrix tablets, with the polymer molecular weight increased, the drug release mechanism was gradually transferred from mainly depending on the erosion to the diffusion; for SAL matrix tablets, the drug release mainly depends on erosion mechanism; and for XG matrix tablets, the drug release mainly depends on non-Fick diffusion mechanism. Comparison of the performance difference between the polymer materials will contribute to rational design and prediction of drug release behaviors from matrix tables and ultimately to achieve clinical needs.
Alginates ; chemistry ; Bronchodilator Agents ; administration & dosage ; Delayed-Action Preparations ; Drug Carriers ; Drug Compounding ; Drug Delivery Systems ; Excipients ; chemistry ; Glucuronic Acid ; chemistry ; Hexuronic Acids ; chemistry ; Hypromellose Derivatives ; Methylcellulose ; analogs & derivatives ; chemistry ; Molecular Weight ; Polyethylene Glycols ; chemistry ; Polymers ; chemistry ; Polysaccharides, Bacterial ; chemistry ; Tablets ; Theophylline ; administration & dosage ; Water

This paper is to study the inhibitory effect of water soluble polymers--methyl cellulose (MC), hydroxypropyl methyl cellulose (HPMC), hydroxypropyl cellulose (HPC-M), poloxamer (F68) and polyvidon (PVP) on osthole (OST) crystallization and investigate the impact of polymer concentration and viscosity on crystallization behavior. Also, UV spectrophotometry method was used to determine the drug concentration at different time point to draw the OST concentration-time curve. Results show that HPMC has the most significant inhibition effect on OST crystallization, and drug concentration level is 1.61 times higher than that in control solution within 8 h followed by PVP (1.54) and MC (1.45) respectively. The kinetics of OST recrystallization can be described using first-order reaction, and the crystallization rate constants obtained by analyzing the regression equation indicate that HPMC-60SH-4000 and HPMC-60SH-10000 can greatly influence OST crystal formation. The dissolution rate of drugs precipitated from water-soluble polymer solutions is faster compared with controls in pH 1.2 HCl and pH 6.8 phosphate buffers, which demonstrated that water-soluble polymers can not only change the behavior of drug crystallization but markedly improve the dissolution rate of water insoluble drugs.
Cellulose ; analogs & derivatives ; chemistry ; Cnidium ; chemistry ; Coumarins ; chemistry ; isolation & purification ; Crystallization ; Hypromellose Derivatives ; Kinetics ; Methylcellulose ; analogs & derivatives ; chemistry ; Plants, Medicinal ; chemistry ; Poloxamer ; chemistry ; Polymers ; chemistry ; Povidone ; chemistry ; Solubility ; Viscosity

Ranolazine hydrochloride sustained-release tablet (RH-ST) was prepared and its release behavior in vitro was studied. The pharmacokinetic characteristics and bioavailability in six Beagle dogs after oral administration of RH-ST and ranolazine hydrochloride common tablets (RH-CT) as reference were compared. Three kinds of matrix, hydroxypropylmethylcellulose (HPMC K4M), ethylcellulose (EC 100cp) and acrylic resins (Eudragit RL100) were selected as functional excipients to keep ranolazine hydrochloride (RH) release for 12 hours. Through orthogonal designs, the polymers were quantified and the optimized cumulative release profile was obtained. The single oral dose of RH-ST 500 mg and RH-CT 333.3 mg was given to six dogs using a two way crossover design. Plasma levels were determined by LC-MS and the absorption fractions were calculated according to Loo-Riegelman formula. The steady-state concentration of RH in plasma of six dogs and its pharmacokinetics behaviors after continuous oral administration of RH-ST and RH-CT at different time intervals were studied by LC-MS. The steady-state pharmacokinetic parameters were computed by software program BAPP2.0. With the increase of the amount of the matrix, the drug release was decreased. The most important factor influencing drug release is the quantity of HPMC K4M. Drug release within the period (from 0 h to 12 h) fitted well into Higuchi model. The correlation coefficient (r) between the dissolution in vitro in release media of the distilled water and the absorptin fraction in vivo was 0.9550. To compare with RH-CT, RH-ST in vivo has a steady and slow release behavior, Tmax was obviously delayed (3.00 +/- 0.50) h and the relative bioavailability was over 80 percentage. The combined use of multiple polymers can decrease the tablet weight effectively, and the drug release rate can be decreased both in vitro and in vivo.
Acetanilides ; administration & dosage ; pharmacokinetics ; Acrylic Resins ; chemistry ; Administration, Oral ; Animals ; Area Under Curve ; Biological Availability ; Cellulose ; analogs & derivatives ; chemistry ; Cross-Over Studies ; Delayed-Action Preparations ; Dogs ; Excipients ; Female ; Hypromellose Derivatives ; Male ; Methylcellulose ; analogs & derivatives ; chemistry ; Piperazines ; administration & dosage ; pharmacokinetics ; Ranolazine ; Tablets

This study involves mathematical simulation model such as in vitro-in vivo correlation (IVIVC) development for various extended release formulations of nimesulide loaded hydroxypropylmethylcellulose (HPMC) microparticles (M1, M2 and M3 containing 1, 2, and 3 g HPMC, respectively and 1 g drug in each) having variable release characteristics. In vitro dissolution data of these formulations were correlated to their relevant in vivo absorption profiles followed by predictability worth analysis of these Level A IVIVC. Nimaran was used as control formulation to validate developed formulations and their respective models. The regression coefficients of IVIVC plots for M1, M2, M3 and Nimaran were 0.834 9, 0.831 2, 0.927 2 and 0.898 1, respectively. The internal prediction error for all formulations was within limits, i.e., < 10%. A good IVIVC was found for controlled release nimesulide loaded HPMC floating M3 microparticles. In other words, this mathematical simulation model is best fit for biowaiver studies which involves study parameters as those adopted for M3 because the value of its IVIVC regression coefficient is the closest to 1 as compared to M1 and M2.
Anti-Inflammatory Agents, Non-Steroidal ; administration & dosage ; pharmacokinetics ; Cross-Over Studies ; Cyclooxygenase 2 Inhibitors ; administration & dosage ; pharmacokinetics ; Delayed-Action Preparations ; Humans ; Hypromellose Derivatives ; Methylcellulose ; analogs & derivatives ; Microspheres ; Models, Chemical ; Sulfonamides ; administration & dosage ; pharmacokinetics

To prepare verapamil hydrochloride (VH) core-in-cup tablets with tri-layered tablet and four-layered tablet as core tablets, separately, which can provide biphasic release with double-pulsatile and multi-phasic release, core tablets were prepared by direct compression method, and core-in-cup tablets by dry-compression coated technology. The parameter, time-lag (T(lag)), was used to evaluate the influence of factors, such as the weight of the top cover layer, the amount of hydroxypropylmethylcellulose (HPMC), and the compression load on VH release. With the increase of the weight and HPMC amount of the top cover layer, the first lag time T(lag1) was prolonged. The second lag time T(lag2) of core-in-cup tablet with four-layered tablet as core tablet increased with the increasing amount of HPMC K100M. With the increase of compression load among the range (6 - 10 kg x cm(-2)), the two lag times were prolonged. Core-in-cup tablets with double-pulsatile and multi-phasic release released VH after the first lag time (4 -5 h), then kept sustained release for 12 h or 13 h, finally released rapidly. The drug in the core-in-cup tablet only released from the top cover layer. T(lag) is determined by the erosion rate of the inhibitor layers (the top cover layer and the sustained-release layer of the multi-layer core tablet).
Delayed-Action Preparations ; Drug Carriers ; Drug Compounding ; methods ; Drug Delivery Systems ; Excipients ; chemistry ; Hypromellose Derivatives ; Methylcellulose ; analogs & derivatives ; chemistry ; Tablets ; Verapamil ; administration & dosage

Insoluble breviscapin was chosen as the model drug. Bi-layer osmotic pump technology and gel matrix technology were used to prepare the breviscapin sustained and controlled release preparations. Dissimilarity factors (f1) and similarity factors (f2) were applied as similar judgment index to compare the effects of in vitro conditions on the release behavior of different types of breviscapin sustained and controlled release preparations. The tolerance of in vitro release conditions of bi-layer osmotic pump technology and gel matrix technology were studied. The results showed that in vitro release conditions have a greater impact on the gel matrix sustained release formulations, while have almost no effects on the osmotic pump controlled release formulations. Therefore, osmotic pump controlled release technology is less affected by the drug release environment. And it has a very good application prospect.
Delayed-Action Preparations ; Drug Carriers ; Excipients ; Flavonoids ; administration & dosage ; Hypromellose Derivatives ; Methylcellulose ; analogs & derivatives ; chemistry ; Osmolar Concentration ; Osmosis ; Polyethylene Glycols ; chemistry ; Rotation ; Technology, Pharmaceutical ; methods ; Temperature