Orodispersible films (oral dispersible films), a novel form of oral solid dosage forms, are widely used for patients with dysphagia and those with uncontrollable autonomic behavior. In this study, suvorexant orodispersible film was prepared by hot melt extrusion technology, and the disintegration time, mechanical properties, in vitro dissolution and pharmacokinetics were evaluated, compared with other orodispersible films and commercially available tablets Belsomra. All experiments were approved by the Committee on the Management and Use of Laboratory Animals of Academy of Military Medical Sciences (IACUC-DWZX-2024-504). The results showed that the dissolution rate of suvorexant orodispersible film was faster and the mechanical strength was better than that of other commercially available orodispersible film, which could meet the needs of storage and transportation. Differential scanning calorimetry and X-ray diffraction results showed that suvorexant was dispersed within the orodispersible film in an amorphous state. The in vitro dissolution of the film was observed to be four times faster than that of the commercial tablets, achieving complete dissolution within five minutes. Pharmacokinetic evaluations in Beagle dogs revealed that the self-formulated orodispersible film exhibited no significant differences in the area under the blood concentration-time curve when compared with Belsomra. However, the film showed a faster onset of action, with a peak time that was twice as rapid, and a maximum blood concentration that was twice as high as that of Belsomra. Leveraging hot melt extrusion technology, the suvorexant orodispersible film offers a straightforward, continuous production process with consistent quality. It serves as an excellent platform for the development of solvent-free film preparations tailored for patients with special needs.

The rheological properties of drug and carrier materials have a wide range of guiding significance for the formulation and process development of solid dispersions. In this study, the rheological properties of materials with different drug carrier ratios were systematically studied with suvorexant as the model drug and copovidone as the carrier material, which provided a sufficient basis for determining the formulation and process of solid dispersions. The optimal suvorexant-copovidone ratio obtained by oscillating temperature scanning was 1∶4. If the ratio is greater than 1∶ 4, the glass transformation temperature of the material will increase significantly, and the solubilization effect of the solid dispersion will show a downward trend. The results of oscillation temperature scanning and oscillation temperature sweep can show that when the extrusion temperature is greater than 150 ℃, the viscosity of the material is less than 10 000 Pa·s, and the melt can be extruded smoothly, and the best extrusion temperature of 160-180 ℃ can be obtained by combining the dissolution results. Finally, the dissolution of suvorexant tablets guided by rheological property studies in multiple media is similar to that of the commercially available tablets Belsomra. Therefore, rheological studies can screen and optimize the formulation and process of suvorexant solid dispersions at the mechanism level, which is of great significance to improve the success rate of R&D and shorten the R&D cycle of solid dispersions prepared by hot melt extrusion.

Objective To analyze the factors affecting the prognosis of patients with knee osteoarthritis,and to construct a nomogram prediction model in conjunction with multi-dimensional clinical indicators.Methods The clinical data of 234 pa-tients with knee osteoarthritis who were treated in our hospital from January 2015 to June 2021 were retrospectively analyzed,including 126 males and 108 females;age more than 60 years old for 135 cases,age less than 60 years old for 99 cases.Lysholm knee function score was used to evaluate the prognosis of the patients,and the patients were divided into good progno-sis group for 155 patients and poor prognosis group for 79 patients according to the prognosis.The clinical data of the subjects in the experimental cohort were analyzed by single factor and multiple factors.The patients were divided into experimental co-hort and verification cohort,the results of the multiple factor analysis were visualized to obtain a nomogram prediction model,the receiver operating characteristic curve(ROC),calibration curve and decision curve were used to evaluate the model's dis-crimination,accuracy and clinical benefit rate.Results The results of multivariate analysis showed that smoking,pre-treatment K-L grades of Ⅲto Ⅳ,and high levels of interleukin 6(IL-6)and matrix metallo proteinase-3(MMP-3)were risk factors for the prognosis of patients with knee osteoarthritis.ROC test results showed that the area under the curve of the nomogram model in the experimental cohort and validation cohort was 0.806[95％CI(0.742,0.866)]and 0.786[(95％CI(0.678,0.893)],re-spectively.The results of the calibration curve showed that the Brier values of the experimental cohort and verification cohort were 0.151 points and 0.134 points,respectively.When the threshold probability value in the decision curve was set to 31％,the clinical benefit rates of the experimental cohort and validation cohort were 51％and 56％,respectively.Conclusion The prognostic model of patients with knee osteoarthritis constructed based on multi-dimensional clinical data has both theoretical and practical significance,and can provide a reference for taking targeted measures to improve the prognosis of patients.

Objective To explore the modal testing method for the three-axis manned centrifuge under elastic boundary conditions with considerations on its complicated structure and high rotational inertia.Methods Modal testing was carried out with a three-axis manned centrifuge under elastic boundary conditions as the subject and a force hammer as the excitation source according to GJB 2706A-2008 Modal tests method for spacecraft and GB/T 11349.3-1992 Experimental determination of mechnical mobility measurements using impact excitation.Four times of hammering were carried out at each excitation position,and the data of the four times of hammering underwent linear average computation.Data acquisition was implemented with a three-axis accelerometer and a 64-channel data collector,and the modal data were analyzed using a frequency response function based on the Test.Lab modal test and analysis software.Results The coherence coefficient of the excitation signal was not lower than 0.8 in the 30 Hz band;the first three orders of the system's intrinsic vibrations were all torsional vibrations,with the frequencies of 9.15,15.66 and 19.22 Hz,respectively;the first order frequency of the system was about 9.15 Hz for both Z18 and Z21 excitation positions,and each of the second and third order frequencies similar situations were observed for also had a roughly equal value for the two excitation positions.Conclusion The force hammer testing method is applicable for the modal testing of the three-axis manned centrifuge,ensuring equipment safety and subject comfort.Referen-ces are provided for the following structural optimization design.[Chinese Medical Equipment Journal,2024,45(8):38-43]

To realize the non-destructive and rapid origin discrimination of Poria cocos in batches, this study established the P. cocos origin recognition model based on hyperspectral imaging combined with machine learning. P. cocos samples from Anhui, Fujian, Guangxi, Hubei, Hunan, Henan and Yunnan were used as the research objects. Hyperspectral data were collected in the visible and near infrared band(V-band, 410-990 nm) and shortwave infrared band(S-band, 950-2 500 nm). The original spectral data were divided into S-band, V-band and full-band. With the original data(RD) of different bands, multiplicative scatter correction(MSC), standard normal variation(SNV), S-G smoothing(SGS), first derivative(FD), second derivative(SD) and other pretreatments were carried out. Then the data were classified according to three different types of producing areas: province, county and batch. The origin identification model was established by partial least squares discriminant analysis(PLS-DA) and linear support vector machine(LinearSVC). Finally, confusion matrix was employed to evaluate the optimal model, with F1 score as the evaluation standard. The results revealed that the origin identification model established by FD combined with LinearSVC had the highest prediction accuracy in full-band range classified by province, V-band range by county and full-band range by batch, which were 99.28%, 98.55% and 97.45%, respectively, and the overall F1 scores of these three models were 99.16%, 98.59% and 97.58%, respectively, indicating excellent performance of these models. Therefore, hyperspectral imaging combined with LinearSVC can realize the non-destructive, accurate and rapid identification of P. cocos from different producing areas in batches, which is conducive to the directional research and production of P. cocos.
Hyperspectral Imaging ; Wolfiporia ; China ; Least-Squares Analysis ; Support Vector Machine

In this study, we explored the mechanism of Huganning tablet (HGNP) in the treatment of nonalcoholic fatty liver disease (NAFLD) based on network pharmacology and computer-aided drug design. Firstly, the potential ingredients and targets of HGNP were identified from TCMSP database, Swiss Target Prediction database, Chinese pharmacopoeia (2015) and literatures, and then the targets of HGNP intersected with NAFLD disease targets that obtained in GeneCards database to acquired potential targets. The bioconductor bioinformatics package of R software was used for gene ontology (GO) enrichment and Kyoto encyclopedia of genes and genomes (KEGG) enrichment analysis. The network of “potential ingredient-key target-pathway” was formed in Cytoscape software to study the interactions between potential ingredients of HGNP, key targets, pathways and NAFLD. Based on the results of network pharmacology, the molecular docking analysis of the key targets and potential active ingredients in HGNP tablets with top degree in the network was conducted using Discovery Studio 2020 software, followed by molecular dynamics simulations, binding free energy calculation, drug-likeness properties analysis and ADMET (absorption, distribution, metabolism, excretion and toxicity) properties prediction. In vitro, HepG2 cells were used to establish steatosis model, and the effects of five key compounds on hepatocyte steatosis were analyzed by oil red O staining and triglyceride (TG) content determination. The results showed that 141 ingredients and 151 potential targets were obtained. A total of 2 526 items and 151 pathways were identified by GO and KEGG enrichment analysis. The molecular docking suggested that five components, isorhamnetin, salvianolic acid B, emodin, resveratrol and rhein, exhibited strong binding ability with key targets [retinoic acid receptor RXR-alpha (RXRA), tumor necrosis factor (TNF), glycogen synthase kinase-3 beta (GSK3B), serine/threonine-protein kinase 1 (AKT1)]. It was further verified that isorhamnetin and salvianolic acid B bind to key targets with good structural stability and binding affinity based on molecular dynamics simulations and binding free energy calculations. The drug-likeness properties, pharmacokinetic properties and toxicity of five key compounds were more comprehensively analyzed through drug-likeness properties analysis and ADMET properties prediction. In vitro, all five compounds, isorhamnetin, salvianolic acid B, emodin, resveratrol, and rhein, improved hepatocyte steatosis of HepG2 cells, confirming the reliability of the present study. In conclusion, based on network pharmacology, computer-aided drug design and in vitro validation, this study investigated the mechanism of HGNP for the treatment of NAFLD at multiple levels and provided a basis for its clinical application.

AIM: To compare the differences and correlations between different types of anisometropia, binocular visual acuity and biological parameters in school-age children.METHODS: A total of 128 school-age children(6-12 years)with mild-to-moderate anisometropia were retrospectively analyzed. Subjects were divided into five groups according to anisometropia type. All participants underwent cycloplegic refraction, A-scan ultrasound biometry, and corneal topography. Refractive status, best-corrected visual acuity(BCVA), anterior chamber depth(ACD), lens thickness(LT), vitreous chamber depth(VCD), axial length(AL), corneal radius(CR), and ratio of AL and CR(AL/CR)were recorded. Kruskal-Wallis and Spearman rank correlation tests were then used for statistical analysis.RESULTS: Hyperopic anisometropia had the greatest binocular vision difference(0.14±0.20). Myopic anisometropia had the greatest asymmetry in AL and VCD(0.56±0.41 and 0.56±0.39 mm, respectively). Anisometropia was positively correlated with BCVA, VCD, AL, and AL/CR(r=0.266, 0.379, 0.350, 0.263, respectively; P<0.05), and it was not significantly correlated with LT and CR(r=-0.019,-0.069, respectively; P>0.05), while no parameters had a statistically significant correlation with anisometropia in each group.CONCLUSION: School-age children with hyperopic anisometropia showed the greatest difference of binocular acuity in the four types of anisometropia. The inter-ocular differences of biometric parameters in simple hyperopic or myopic anisometropia were mainly attributed to the asymmetry of VCD and AL, while the differences in ocular parameters were not statistically significant in school-age children with astigmatic anisometropia.

PURPOSE: This study aims to elucidate the electrotaxis response of alveolar epithelial cells (AECs) in direct-current electric fields (EFs), explore the impact of EFs on the cell fate of AECs, and lay the foundation for future exploitation of EFs for the treatment of acute lung injury. METHODS: AECs were extracted from rat lung tissues using magnetic-activated cell sorting. To elucidate the electrotaxis responses of AECs, different voltages of EFs (0, 50, 100, and 200 mV/mm) were applied to two types of AECs, respectively. Cell migrations were recorded and trajectories were pooled to better demonstrate cellular activities through graphs. Cell directionality was calculated as the cosine value of the angle formed by the EF vector and cell migration. To further demonstrate the impact of EFs on the pulmonary tissue, the human bronchial epithelial cells transformed with Ad12-SV40 2B (BEAS-2B cells) were obtained and experimented under the same conditions as AECs. To determine the influence on cell fate, cells underwent electric stimulation were collected to perform Western blot analysis. RESULTS: The successful separation and culturing of AECs were confirmed through immunofluorescence staining. Compared with the control, AECs in EFs demonstrated a significant directionality in a voltage-dependent way. In general, type Ⅰ alveolar epithelial cells migrated faster than type Ⅱ alveolar epithelial cells, and under EFs, these two types of cells exhibited different response threshold. For type Ⅱ alveolar epithelial cells, only EFs at 200 mV/mm resulted a significant difference to the velocity, whereas for, EFs at both 100 mV/mm and 200 mV/mm gave rise to a significant difference. Western blotting suggested that EFs led to an increased expression of a AKT and myeloid leukemia 1 and a decreased expression of Bcl-2-associated X protein and Bcl-2-like protein 11. CONCLUSION EFs could guide and accelerate the directional migration of AECs and exert antiapoptotic effects, which indicated that EFs are important biophysical signals in the re-epithelialization of alveolar epithelium in lung injury.
Humans ; Rats ; Animals ; Alveolar Epithelial Cells ; Lung ; Lung Injury ; Cell Movement/physiology*

Objective To construct a quantitative evaluation system for professional competency of healthcare-associated infection(HAI)management professionals,and provide scientific basis for the training of professionals through scientific evaluation.Methods Literature and experience summary were adopted to construct evaluation key points.Evaluation key points were selected through expert consultation method,and the weight coefficient of evaluation key points was calculated.The hierarchical evaluation content options for each evaluation key point were designed and assigned score values by expert group.The product of the score of each evaluation key point and its weight was the score for this point,and the total score of the evaluated person was calculated based on the total score of all evaluation points.Results The evaluation system included 25 evaluation key points in 9 dimensions,in-cluding"basic conditions""recognition competency in HAI""monitoring competency in HAI""prevention and con-trol technology application competency in HAI""emergency response competency""organization and coordination competency""quality improvement competency""education and training competency"and"professional scientific re-search competency in HAI prevention and control".Each evaluation key point contained three hierarchical quantita-tive score contents.The internal consistency reliability of the expert's questionnaire consultation Cronbach's a coef-ficient was 0.873,the total scale-level content validity index(S-CVI)was 0.868,and the item-level content validity index(I-CVI)ranged 0.71-1.Conclusion The quantitative evaluation system constructed in this study meets the requirements for reliability and validity.It is scientifically feasible for evaluating the professional competency of HAI management professionals.It can effectively identify weakness in their competency,determine training directions and priorities,and provide a scientific basis for talent development and team building for HAI management profe-ssionals in medical institutions,and promotes high-quality development within hospitals.

Objective: Schizophrenia is a complex and devastating psychiatric disorder with a strong genetic background. However, much uncertainty still exists about the role of genetic susceptibility in the pathophysiology of schizophrenia. TEA domain transcription factor 1 (TEAD1) is a transcription factor associated with neurodevelopment and has modulating effects on various nervous system diseases. In the current study, we performed a case–control association study in a Northeast Chinese Han population to explore the characteristics of pathogenic TEAD1 polymorphisms and potential association with schizophrenia. Methods: We recruited a total of 721 schizophrenia patients and 1,195 healthy controls in this study. The 9 single nucleotide polymorphisms (SNPs) in the gene region of TEAD1 were selected and genotyped. Results: The genetic association analyses showed that five SNPs (rs12289262, rs6485989, rs4415740, rs7113256, and rs1866709) were significantly different between schizophrenia patients and healthy controls in allele or/and genotype frequencies. After Bonferroni correction, the association of three SNPs (rs4415740, rs7113256, and rs1866709) with schizophrenia were still evident. Haplotype analysis revealed that two strong linkage disequilibrium blocks (rs6485989-rs4415740-rs7113256 and rs16911710-rs12364619-rs1866709) were globally associated with schizophrenia. Four haplotypes (C-C-C and T-T-T, rs6485989-rs4415740-rs7113256; G-T-A and G-T-G, rs16911710-rs12364619-rs1866709) were significantly different between schizophrenia patients and healthy controls. Conclusion The current findings indicated that the human TEAD1 gene has a genetic association with schizophrenia in the Chinese Han population and may act as a susceptibility gene for schizophrenia.