Objective To analyze the prevalence status of cardiometabolic risk factor (CMRF) and its aggregation among workers engaged in new forms of employment. Methods A total of 5 429 new employment workers (including couriers, online food delivery workers, and ride hailing drivers) who underwent health medical examinations at a tertiary hospital in Beijing City were selected as the research subjects using the judgment sampling method. Data on waist circumference, blood pressure, blood glucose, and blood lipid levels were collected to analyze their CMRF [central obesity, elevated blood pressure, elevated blood glucose, elevated triglycerides, and reduced high-density lipoprotein cholesterol (HDL-C)] and their aggregation (with ≥ 2 of the above 5 risk factors) status. Results The detection rates of central obesity, elevated blood pressure, elevated blood glucose, elevated triglycerides, and reduced HDL-C were 61.2%, 38.2%, 29.5%, 40.9% and 22.6%, respectively. The detection rates of CMRF aggregation was 57.8%. The result of multivariable logistic regression analysis showed that male, age ≥45 years, smoking, overweight, and obesity were risk factors for CMRF aggregation (all P<0.05). Conclusion The detection rate of CMRF and its aggregation among workers with new forms of employment in Beijing City is relatively high. Targeted prevention and control efforts should be strengthened for high-risk populations, especially males, workers aged ≥45 years, smokers, and those who are overweight or obese.

BACKGROUND:The treatment of distal tibial fractures with soft tissue injury has always been challenging,and the new retrograde tibial nailing is a new choice.Up to now,there were few reports on the biomechanical properties between the new retrograde tibial nailing,anterograde intramedullary nailing and supercutaneous locking plate. OBJECTIVE:To explore the biomechanical stability of new retrograde tibial nailing,antegrade intramedullary nailing and supercutaneous locking plate in the treatment of distal tibial fractures with soft tissue injury using finite element analysis so as to offer a scientific foundation for clinical application. METHODS:The finite element model of transverse distal tibia fracture was established by relevant software utilizing the CT data of the tibia from a 42-year-old healthy male.Retrograde tibial nailing,antegrade intramedullary nailing and supercutaneous locking plate finite element models were assembled under the principle of fracture fixation.Finally,meshing,applying loads,and data processing were accomplished with the ANSYS 2019 software.Moreover,the stress distribution and displacement of the tibia and internal fixation of each model were compared. RESULTS AND CONCLUSION:(1)The displacement of fracture end in the three groups increased with the increase of load.In all mode loads,the average displacement of the fracture end was the least in the retrograde tibial nailing group,followed by the supercutaneous locking plate group,and the highest in the antegrade intramedullary nailing group.At 800 N vertical load,the displacement difference of the fracture end was statistically significant(P<0.05).There was no statistical significance in other load modes.(2)Under different loads,the tibial stress in the three groups was the highest in the middle of the tibia,and gradually decreased to the proximal and distal ends.The stress distribution of the tibial shaft was the highest in the retrograde tibial nailing group,followed by the supercutaneous locking plate group,and the least in the antegrade intramedullary nailing group.(3)Under different loads,the stress of the tibial stress raiser in the three groups was significantly higher in the supercutaneous locking plate group than in the other two groups,with statistical significance(P<0.05).(4)Under different loads,the stress of the fixators in the three groups was the largest in the supercutaneous locking plate group,followed by the retrograde tibial nailing group,and the minimum in the antegrade intramedullary nailing group.There were significant differences in the stress of fixator stress raiser among the three groups under different loading modes(P<0.05).(5)It is indicated that all three fixation methods have the good anti-rotation ability and axial stability.Retrograde tibial nail shows better biomechanical stability.

BACKGROUND:The treatment of distal tibial comminuted fractures with soft tissue injury has always been challenging.The new retrograde tibial nailing and supercutaneous locking plate are important treatment methods,but their strain and stress shielding at the fracture end during different periods of fracture healing and different load conditions have not been reported. OBJECTIVE:To explore the biomechanical stability of retrograde tibial nailing and supercutaneous locking plate in different periods of fracture healing by finite element analysis to offer a scientific foundation for clinical application and rehabilitation exercise. METHODS:The finite element model of distal tibial comminuted fracture was established by utilizing the CT data of the tibia from a 40-year-old healthy male.Retrograde tibial nailing,supercutaneous locking plate,and callus models were assembled in accordance with the principle of fracture fixation.The finite element analysis was performed using ANSYS software to compare the displacement of the fracture end,the stress shielding of the tibia,the stress of the callus,and the stress distribution of the tibia and the fixation device during different periods of fracture healing. RESULTS AND CONCLUSION:(1)The relative displacement of the tibial fracture decreased gradually with the healing of the fracture,and the displacement decreased significantly after 3 months.At 0 and 1 months after operation,the vertical displacement and total displacement of the supercutaneous locking plate group were higher than those in the retrograde intramedullary nail group.The Z-axis displacement(horizontal medial and lateral displacement)of the two fixation methods was more obvious than the X-axis and Y-axis,and the Z-axis displacement of supercutaneous locking plate group was the most obvious.The maximum Z-axis displacement of the two fixation methods was located on the outside of the tibia,and the minimum displacement was located on the inside of the tibia.(2)The stress shielding rate at different periods of fracture healing gradually decreased with time.The stress shielding rate of the retrograde intramedullary nail was higher than that of the supercutaneous locking plate at different stages of fracture healing.After 3 months,the stress shielding rate of the supercutaneous locking plate was reduced to about 4%,and the stress shielding rate of the retrograde intramedullary nail was reduced to about 40%.(3)The stress of the stress concentration site of the callus in the two fixation methods increased with the increase of the load,and the stress of the callus in the supercutaneous locking plate group was always greater than that in the retrograde intramedullary nail group.The maximum stress distribution of the callus was approximately equally distributed among the two modes of fixation,both in the lateral portion of the tibia.(4)As the fracture healed,the maximum stress of the tibia in the two groups decreased gradually,and the stress in the supercutaneous locking plate group was always greater than that in the retrograde intramedullary nail group.The average stress of the maximum stress area of the tibia in the supercutaneous locking plate group under 1 500 N load was 285 MPa,while that in the retrograde intramedullary nail group was 26 MPa.(5)As the fracture healed,the stress of the fixation device in the two groups decreased gradually,and the stress in the supercutaneous locking plate group was significantly higher than that in the retrograde intramedullary nail group.After 3 months,the stress of the two fixation devices decreased significantly.(6)It is indicated that in the early stage of fracture healing,the strain on the fracture end in the retrograde intramedullary nail group is small,and the maximum stress of the tibia is moderate,allowing early loaded.The fractured ends in the supercutaneous locking plate group had too large strain and too large maximum stress of the tibia,which needed to be partially loaded under protection and could not be fully loaded.In the middle and late stages of fracture healing,the tibial retrograde intramedullary nail and the supercutaneous locking plate could be completely loaded,and the stress shielding rate of the supercutaneous locking plate was significantly lower than the tibial retrograde intramedullary nail.

In 2009,the World Health Organization included snakebite on the list of neglected tropical diseases,acknowledging it as a common occupational hazard for farmers,plantation workers,and others,causing tens of thousands of deaths and chronic physical disabilities every year.This guideline aims to provide practical information to help clinical professionals evaluate and treat snakebite victims.These recommendations are based on clinical experience and clinical research evidence.This guideline focuses on the following topics:snake venom,clinical manifestations,auxiliary examination,diagnosis,treatments,and prevention.

Background Shoemaking industry workers are prone to work-related musculoskeletal disorders (WMSDs) due to long-term awkward postures during the work process. There is little research on the prevalence and influencing factors of WMSDs in the knee region of this industry, and it should be taken seriously. Objective To estimate the prevalence of work-related knee pain among shoemaking workers and analyze the related influencing factors. Methods A total of 6982 shoemaking workers were selected from 26 shoemaking factories in Guangdong, Hubei, Fujian, Chongqing, Shandong, Zhejiang, and Jingxi by convenience sampling. Prevalence of work-related knee pain in past year, demographic characteristics, occupational related factors, and work posture were collected by a cross-sectional survey using the electronic version of Musculoskeletal Disorder Questionnaire. Logistic regression analysis was used to analyze the influencing factors that may lead to work-related knee pain. Results This survey collected 6982 valid questionnaires with a recovery rate of 98.3%. The prevalence of work-related knee pain of shoemaking workers in the past 12 months was 13.0% (908/6982). According to the results of logistic regression analysis, compared with workers with less than 5 years of service, workers with 5-10 years of service (OR=1.21, 95%CI: 1.02, 1.45) and more than 10 years (1.53, 95%CI: 1.27, 1.83) showed a higher risk of knee WMSDs; sometimes, often and very frequent (reference : rarely or never) long-term standing (OR=1.33, 95%CI: 1.08, 1.64; OR=2.67, 95%CI: 2.10, 3.39; OR=2.75, 95%CI: 2.08, 3.63) and sometimes, often and very frequent (reference: rarely or never) long-term squatting or kneeling (OR=1.80, 95%CI: 1.47, 2.21; OR=2.43, 95%CI: 1.58, 3.75; OR=3.22, 95%CI: 1.66, 6.24) increased the risk of knee pain: long-term bending (OR=1.59, 95%CI: 1.34, 1.89) and often repeated movement of lower limbs and ankles (OR=1.48, 95%CI: 1.25, 1.75) were also risk factors for knee WMSDs among shoemaking industry workers (P<0.05). Adequate rest time (OR=0.58, 95%CI: 0.49, 0.68) and able to stretch or change leg posture (OR=0.75, 95%CI: 0.64, 0.88) reduced the risk of knee WMSDs (P<0.05). Conclusion In the shoemaking industry, length of service and awkward postures are risk factors for knee pain. The shoemaking enterprises should ensure that workers have sufficient rest time, reduce long-term standing, squatting, kneeling, and bending postures, as well as lower limbs repetition in order to reduce the occurrence of knee WMSDs of workers.

Objective:To analyze and predict the future trend of the premature mortality of major chronic and non-communicable diseases in Anhui Province, evaluate the implementation of the "Healthy China 2030" Plan, and explore its influencing factors.Methods:Using data from death-cause surveillance and statistical yearbooks in Anhui, the trend prediction and analysis on influencing factors were conducted by using methods such as time series accumulation and logarithmic linear Joinpoint regression, principal component regression.Results:In Anhui, 28.10% of the deaths were premature ones, of which 84.40% were attributed to chronic and non-communicable diseases. In premature deaths attributed to chronic and non-communicable diseases, the deaths caused by malignant tumor and cardiovascular disease accounted for 45.88% and 41.65% respectively. The prediction results showed that the premature mortality of major chronic and non-communicable diseases would decrease in Anhui in the future, and by 2030, the goal in the "Healthy China 2030" Plan would be reached only in rural area. To reduce premature death, it is necessary to pay attention to the prevention and control of malignant tumor and cardiovascular disease. Men in urban area are the key population. Factors that reflect urban infrastructure had a significant impact on premature mortality of major chronic non-communicable diseases, such as garden and green space area per capita. Factors such as concentration of PM 2.5 had a negative impact on premature mortality of chronic non-communicable diseases, while factors such as garden and green space area per capita had a positive impact. Conclusions:Disease burden caused by chronic and non-communicable diseases, such as malignant tumor, exits in Anhui. Men in urban area are key population in the prevention and control of chronic and non-communicable diseases in the future.

"Toxicity Testing in the 21st Century—A Vision and Strategy"proposed by the National Research Council of US has brought innovative directives and objectives for toxicity evaluation and risk assessment,pushing forward the next generation of toxicity testing and risk assessment.In this initiative,the concept of adverse outcome pathways(AOPs)has emerged as a prominent methodology,capturing the attention of toxicologists and researchers due to its promising applications in recent years.The quantitative AOP(qAOP)is an extension of the adverse outcome pathway,which is built upon the foundational qualitative adverse outcome pathway model and leverages mathematical frame-works to depict dose-response and/or response-response relationships.This article reviews the princi-ples and advancement surrounding qAOP,introduceds two prevalent methodologies for constructing qAOP,Bayesian network models and regression models,and demonstrates diverse applications of qAOP.Actual cases are used to underscore the transformative role of qAOP in contemporary toxicology and risk assessment practices.

Objective: To analyze the current status of work-related musculoskeletal disorders (WMSDs), work fatigue and musculoskeletal pain in Chinese occupational population, and to study the relationship between work fatigue and musculoskeletal pain and WMSDs. Methods: A total of 66 961 employees from 323 enterprises in 15 key industries in China were selected as the study subjects using stratified cluster sampling method. The incidence of WMSDs in the past year was investigated using the Chinese version of the Musculoskeletal Disorders Questionnaire, and the work fatigue and musculoskeletal pain were investigated using Borg 6-20 Rating of Perceived Exertion Scale and visual analogue scale. The data were standardized using the age composition data of 18 to 60 years from the seventh national population census. Results: The standardized annual incidence of WMSDs was higher in the front-line workers than that in the administrative and other supportive staff (38.82% vs 36.30%). The detection rates of work fatigue and musculoskeletal pain in the study subjects were 44.54% and 63.08%, respectively. The result of S-curve fitting showed that the risk of WMSDs increased with the level of work fatigue (P<0.01). Among the front-line workers, the average of monthly fatigue frequency in the neck, shoulder, lower back, upper back, wrist/hand, foot and ankle, knee, leg, and elbow were higher in the group with WMSDs compared to those without WMSDs (all P<0.01). The pain degree of musculoskeletal pain was higher in all nine sites in the fatigued group than in the no-fatigue group (all P<0.01). The standardized detection rate of musculoskeletal pain was higher in the fatigued group than in the non-fatigued group (80.38% vs 25.71%). The work fatigue was moderate and positively correlated with musculoskeletal pain in all seven sites except the lower back and elbow, with Kendall Tau-b correlation coefficients ranging from 0.423 to 0.546 (all P<0.01). Conclusion: There is a good correlation between work fatigue and local musculoskeletal pain, work fatigue and WMSDs in Chinese occupational population. Implementing ergonomic interventions to control the development of work fatigue can be an effective measure for preventing WMSDs.

Background Prolonged awkward postures during occupational activities can lead to excessive musculoskeletal load on the wrist of workers and symptoms such as wrist pain or discomfort. Objective To survey the prevalence of wrist pain among workers in 10 key industries and analyze its correlation with wrist working postures. Methods By using stratified cluster sampling method, workers from 10 key industries, such as footwear manufacturing industry, shipbuilding manufacturing industry, and automobile manufacturing industry, were selected from seven regions in North China, East China, Central China, South China, Southwest China, Northwest China, and Northeast China. The demographic information, wrist working postures, pain in wrist of the workers were collected through a cross-sectional survey. Pearson χ² test was used to compare prevalence by selected factors, trend χ² test for between group comparison, and unconditional logistic regression models for the association of wrist working postures with wrist pain. Results There were 64052 workers enrolled in this survey, and 56286 provided valid questionnaires (the effective rate was 87.8%). According to the survey, the prevalence of wrist pain was 23.3% (13112/56286), and the industries with higher prevalences were footwear manufacturing (27.1%, 1927/7106), automobile manufacturing (24.9%, 5378/21560), and shipbuilding and related equipment manufacturing (24.4%, 850/3488) industries. Finger pinching (OR=2.09, 95%CI: 1.95-2.24), frequent wrist bending (OR=2.03, 95%CI: 1.92-2.15), fixed wrist bending (OR=1.77, 95%CI: 1.69-1.85), wrist on hard edge (OR=1.34, 95%CI: 1.28-1.40), and arms over shoulders (OR=1.11, 95%CI: 1.05-1.17) increased the risk of reporting wrist pain. Conclusion Awkward postures are related to wrist pain among workers in selected 10 key industries. The related factors are wrist on hard edge, frequent wrist bending, finger pinching, fixed wrist bending, and arms over shoulders.

Hernia and abdominal wall surgery is a relatively new subspecialty in surgery. Although it started late in China, after 25 years of rapid development, it has made remarkable achievements and has become an important part of surgery, laying a solid foundation for the further development of the discipline. At the same time, one should also be soberly aware of the present deficiencies in this field. The development of the field should be more detailed and in-depth from the following aspects: correct understanding of new concepts of hernia and abdominal wall surgery, establishment of hernia patient registration and quality control system, technological innovation and development of technical equipment, especially the expansion of robot surgical systems, materials science progression to hernia and abdominal wall surgery. Faced with this challenge, China is expected to achieve high-quality development in the field of hernia and abdominal surgery.
Humans ; Abdominal Wall/surgery* ; Herniorrhaphy ; Hernia ; China ; Hernia, Ventral/surgery* ; Surgical Mesh