The global burden of malignant tumors keeps increasing， and the increased morbidity and mortality make malignant tumors one of the major challenges to global health. Currently， malignant tumors are mainly managed by surgical resection， radiotherapy， chemotherapy， targeted therapy， and immunotherapy， which， however， usually cause serious adverse reactions， such as tissue damage， immune function inhibition， and multidrug resistance， affecting the prognosis and quality of life of the patients. Traditional Chinese medicine with low toxic and side effects and multi-target， multi-system， and multi-pathway therapeutic effects has shown positive therapeutic potential in cancer treatment. In particular， the traditional Chinese medicine with the effects of softening hardness and dissipating mass， which contains a variety of active ingredients， have shown strong inhibitory effects on tumor cells. Such medicine can not only directly attack tumor cells and inhibit their proliferation and invasion but also exert therapeutic effects by inducing apoptosis， blocking tumor-related signaling pathways， and inhibiting tumor angiogenesis. In addition， traditional Chinese medicine can improve the overall efficacy of cancer treatment by regulating the immune status of the body and reversing the drug resistance of tumor cells. Traditional Chinese medicine can exert the anti-tumor effect by regulating intracellular signaling pathways， which is one of the research hotspots in this field. Signaling pathways such as signal transducer and activator of transcription 3 （STAT3）， phosphatidylinositol 3-kinase （PI3K）/protein kinase B （Akt）/mammalian target of rapamycin （mTOR）， and mitogen-activated protein kinase （MAPK） play a key role in the formation and development of tumors. Traditional Chinese medicine can regulate the growth， apoptosis， and metabolic process of tumor cells by affecting the activity of these signaling pathways， thus exerting the therapeutic effects on tumors. Based on these mechanisms， a large number of experimental studies and clinical trials have proved that traditional Chinese medicine has broad prospects in anti-tumor treatment. To further verify these research results and provide a basis for the clinical application of traditional Chinese medicine and the development of new drugs， a systematic review and integrated analysis of the research reports on the anti-tumor effect of traditional Chinese medicine was carried out to summarize the anti-tumor mechanisms of traditional Chinese medicine. This review is expected to promote the wide application of traditional Chinese medicine in anti-tumor treatment worldwide and bring more hope and possibility to cancer patients.

Collagen is a major structural protein in the matrix of animal cells and the most widely distributed and abundant functional protein in mammals. Collagen’s good biocompatibility, biodegradability and biological activity make it a very valuable biomaterial. According to the source of collagen, it can be broadly categorized into two types: one is animal collagen; the other is recombinant collagen. Animal collagen is mainly extracted and purified from animal connective tissues by chemical methods, such as acid, alkali and enzyme methods, etc. Recombinant collagen refers to collagen produced by gene splicing technology, where the amino acid sequence is first designed and improved according to one’s own needs, and the gene sequence of improved recombinant collagen is highly consistent with that of human beings, and then the designed gene sequence is cloned into the appropriate vector, and then transferred to the appropriate expression vector. The designed gene sequence is cloned into a suitable vector, and then transferred to a suitable expression system for full expression, and finally the target protein is obtained by extraction and purification technology. Recombinant collagen has excellent histocompatibility and water solubility, can be directly absorbed by the human body and participate in the construction of collagen, remodeling of the extracellular matrix, cell growth, wound healing and site filling, etc., which has demonstrated significant effects, and has become the focus of the development of modern biomedical materials. This paper firstly elaborates the structure, type, and tissue distribution of human collagen, as well as the associated genetic diseases of different types of collagen, then introduces the specific process of producing animal source collagen and recombinant collagen, explains the advantages of recombinant collagen production method, and then introduces the various systems of expressing recombinant collagen, as well as their advantages and disadvantages, and finally briefly introduces the application of animal collagen, focusing on the use of animal collagen in the development of biopharmaceutical materials. In terms of application, it focuses on the use of animal disease models exploring the application effects of recombinant collagen in wound hemostasis, wound repair, corneal therapy, female pelvic floor dysfunction (FPFD), vaginal atrophy (VA) and vaginal dryness, thin endometritis (TE), chronic endometritis (CE), bone tissue regeneration in vivo, cardiovascular diseases, breast cancer (BC) and anti-aging. The mechanism of action of recombinant collagen in the treatment of FPFD and CE was introduced, and the clinical application and curative effect of recombinant collagen in skin burn, skin wound, dermatitis, acne and menopausal urogenital syndrome (GSM) were summarized. From the exploratory studies and clinical applications, it is evident that recombinant collagen has demonstrated surprising effects in the treatment of all types of diseases, such as reducing inflammation, promoting cell proliferation, migration and adhesion, increasing collagen deposition, and remodeling the extracellular matrix. At the end of the review, the challenges faced by recombinant collagen are summarized: to develop new recombinant collagen types and dosage forms, to explore the mechanism of action of recombinant collagen, and to provide an outlook for the future development and application of recombinant collagen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo explore the construction and evaluation methods of a rat model of acute myocardial infarction（AMI） with Qi and Yin deficiency syndrome established by sleep deprivation combined with coronary artery ligation. MethodsThirty-six SD rats were randomly divided into a normal group（n=6）， a myocardial infarction group（model A group， n=10）， an acute sleep deprivation+myocardial infarction group（model B group， n=10）， and a chronic sleep deprivation+myocardial infarction group（model C group， n=10） according to body weight. Rats in the normal group were not treated， rats in the model A group underwent only ligation of the left anterior descending coronary artery， rats in the model B group were sleep deprived for 96 h and then underwent ligation of the left anterior descending coronary artery， and rats in the model C group were sleep deprived for an additional 48 h each week with a 24 h rest period as one cycle for three weeks on the basis of the model B group. After coronary artery ligation in the model C group， the first week was defined as the starting point of the first sleep deprivation cycle， and indexes were tested weekly for rats in each group for 3 weeks. Electrocardiogram was used to determine the ligation of the left anterior descending coronary artery in rats， and small animal echocardiography was used to evaluate the cardiac function. The levels of serum creatine kinase（CK）， creatine kinase isoenzyme（CK-MB）， lactate dehydrogenase（LDH）， cardiac troponin T（cTnT）， interleukin-18（IL-18）， and tumor necrosis factor-α（TNF-α） were detected by biochemical assays， and hematoxylin-eosin（HE） staining was used to evaluate the pathological changes of myocardial tissue in rats. The syndrome indicators of Qi and Yin deficiency were evaluated by general state and body weight， grip strength， facial temperature， paw temperature， rectal temperature， salivary flow rate， open field test， tongue color［red（R）， green（G）， and blue（B）］ values， pulse amplitude changes， and enzyme-linked immunosorbent assay（ELISA） for the detection of expression levels of cyclic adenosine monophosphate（cAMP）， cyclic guanosine monophosphate（cGMP）， rat serum corticotropin-releasing factor（CRF）， adrenocorticotropic hormone（ACTH）， triiodothyronine（T3）， tetraiodothyronine（T4）， and corticosterone（CORT） in serum. ResultsIn terms of disease indicators， compared with the normal group， the ST segment of the electrocardiogram in each model group was significantly elevated， the echocardiographic parameters were decreased， the contents of myocardial enzymes and inflammatory factors were increased（P<0.01）， and the myocardial tissue in the infarcted area was significantly damaged. In terms of syndrome indicators， compared with the normal group， the body weight of rats in the model B and C groups decreased at each time point， the grip strength of each model group decreased， the total distance traveled and the number of entries into the center in the open field test decreased， the immobility time increased， the facial and rectal temperatures of rats in the model B and C groups increased， the salivary flow rate of each model group decreased， the tongue color was bright red or light， the tongue body was dry or smooth like a mirror， lacking of moisture sensation， the R， G and B values of the tongue surface increased， the pulse amplitude changes decreased， and the contents of T3 and T4 increased， while the expressions of cAMP， CRF， ACTH and CORT in the model B and C groups increased（P<0.05， P<0.01）. ConclusionContinuous sleep deprivation for 96 h in a multi-platform method combined with coronary artery ligation can construct a rat model of AMI with Qi and Yin deficiency syndrome， and the syndrome manifestations can be maintained for 3 weeks.

ObjectiveTo explore the feasibility， evaluation methods and metabolic differences of high-fat diet（HFD） combined with myocardial ischemia-reperfusion injury（MIRI） to establish a rat model of myocardial ischemia-reperfusion with phlegm and blood stasis blocking collaterals syndrome（PBSBCS）. MethodsThirty-two SD rats were randomly divided into the sham operation， HFD， MIRI， and MIRI+HFD groups. Rats in the sham operation and MIRI groups were fed a standard diet（regular chow）， while the HFD and MIRI+HFD groups received a HFD for 10 weeks. Rats in the MIRI and MIRI+HFD groups underwent myocardial ischemia-reperfusion surgery， while the sham operation group underwent only thread placement without ligation. Cardiac function was assessed via small-animal echocardiography， including left ventricular ejection fraction（EF）， left ventricular fractional shortening（FS）， cardiac output（CO）， and stroke volume（SV）. Serum levels of creatine kinase（CK）， CK-MB， triglyceride（TG）， total cholesterol（TC）， high-density lipoprotein cholesterol（HDL-C）， low-density lipoprotein cholesterol（LDL-C）， lactate dehydrogenase（LDH）， endothelin-1（ET-1）， endothelial nitric oxide synthase（eNOS）， tumor necrosis factor-α（TNF-α）， interleukin-18（IL-18）， oxidized LDL（ox-LDL）， and cardiac troponin T（cTnT） were measured by biochemical assays and enzyme-linked immunosorbent assay（ELISA）. Myocardial histopathology was evaluated via hematoxylin-eosin（HE） staining， while myocardial infarction and no-reflow area were assessed using 2，3，5-triphenyltetrazolium chloride（TTC）， Evans blue， and thioflavin staining. Changes in syndrome characteristics［body weight， tongue surface red-green-blue ［RGB］ values， and pulse amplitude］ of PBSBCS were recorded. Serum differential metabolites were analyzed by ultra-high performance liquid chromatography-quadrupole-time-of-flight mass spectrometry（UPLC-Q-TOF-MS）. ResultsCompared with the sham operation group， the HFD and MIRI+HFD groups showed significant increases in body weight（P<0.01）， RGB values and pulse amplitude decreased in the HFD， MIRI and MIRI+HFD groups， TC， TG， LDL-C and ox-LDL levels increased in the HFD and MIRI+HFD groups， while HDL-C decreased. Blood perfusion peak time and myocardial no-reflow area increased， serum eNOS level decreased， and CK-MB， LDH， and cTnT activities increased in the HFD， MIRI and MIRI+HFD groups（P<0.05， P<0.01）. Whole blood viscosity was increased in the HFD group at medium shear rate， and in the MIRI and MIRI+HFD groups at low， medium and high shear rates（P<0.05， P<0.01）. Platelet aggregation rate increased in the MIRI and MIRI+HFD groups， accompanied by elevated ET-1， TNF-α， and IL-18 levels， reduced cardiac function indices， expanded myocardial no-reflow and infarction areas， and increased serum CK， CK-MB， LDH， and cTnT activities（P<0.05， P<0.01）. Compared with the MIRI group， the HFD and MIRI+HFD groups showed significant increase in body weight， TC， TG， LDL-C and ox-LDL levels， and significant decrease in HDL-C content（P<0.01）. The MIRI+HFD group showed decrease in RGB values and pulse amplitude， and an increase in whole blood viscosity， platelet aggregation， blood perfusion peak time， myocardial no-reflow and infarction areas， elevated ET-1， TNF-α and IL-18 levels， decreased eNOS content， EF and SV， increased serum CK， CK-MB and cTnT activities， and worsened myocardial pathology（P<0.05）. Compared with the HFD group， the MIRI+HFD group showed similar aggravated trends（P<0.05， P<0.01）. Metabolomics results showed that 34 potential biomarkers involving 13 common metabolic pathways were identified in the MIRI+HFD group compared with the sham operation group. ConclusionThe MIRI group resembles blood stasis syndrome in hemodynamics and myocardial injury， and the HFD group mirrors phlegm-turbidity syndrome in lipid profiles and tongue characteristics. While the MIRI+HFD group aligns with PBSBCS in comprehensive indices， effectively simulating clinical features of coronary heart disease（CHD）， which can be used for the evaluation of the pathological mechanism and pharmacodynamics of CHD with PBSBCS.

ObjectiveTo investigate the preparation method of a mouse model of cerebral infarction with Qi and Yin deficiency syndrome induced by streptozotocin（STZ） combined with the photochemical method， and to evaluate the biological basis of the established model. MethodsForty C57B6/J mice were randomly divided into the normal and model groups， with 20 mice in each group. The normal group received no treatment， while the model group was injected intraperitoneally with 55 mg·kg^-1 of STZ once a day for 5 days. Fourteen days post-STZ induction， 10 mice from the normal group were randomly taken into the photochemical group， while 10 mice from the model group were randomly taken into the STZ+photochemical group. Rose Bengal solution injection combined with 520 nm laser irradiation was used to cause thrombosis and induce cerebral infarction in mice. Syndrome indexes for Qi and Yin deficiency were assessed by general state observation， body weight， grip strength， rectal temperature， behavioral experiments， energy metabolism， tongue color［red（R）， green（G）， blue（B）］ values， adenosine triphosphate（ATP） content， corticotropin-releasing factor（CRF） and triiodothyronine（T3） levels. The pathological changes of cerebral infarction in mice were evaluated by detecting serum superoxide dismutase（SOD）， interleukin-1β（IL-1β）， IL-6， and tumor necrosis factor-α（TNF-α） levels in combination with Bederson score. Finally， the endogenous metabolites in mice were detected by ultra-high performance liquid chromatography-quadrupole-time-of-flight mass spectrometry（UPLC-Q-TOF-MS）， and multivariate statistical analysis was performed by partial least squares-discriminant analysis（PLS-DA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）. The data filtering criteria were set as variable importance in the projection（VIP） value> 1， fold change（FC）<0.8 or FC>1.2， P<0.05， to obtain differential metabolites. Then MetaboAnalyst 3.0 was utilized for pathway enrichment analysis of the differential metabolites， aiming to explore the metabolic profile changes and biological basis of mice with Qi and Yin deficiency syndrome of cerebral infarction. ResultsRegarding the syndrome indicators， compared with the normal group， the mice in the model group had lower body weight， higher rectal temperature， lower limb motor ability and energy metabolism efficiency， lower ATP content， lower R， G and B values of the tongue surface， and lower speed of blood glucose regression（P<0.05， P<0.01）. As for the disease indicators， compared with the normal group， the Bederson scores of the photochemical group and the STZ+photochemical group increased， the grip strength decreased， the SOD level decreased， and the levels of inflammatory factors increased（P<0.05）. The results of metabolomics showed that a good separation pattern of components was observed among mice in each group， with significant differences in components. Identification of MS data revealed a total of 44 differential metabolites in mice with Qi and Yin deficiency syndrome of cerebral infarction. Among them， 32 metabolites were up-regulated， mainly including triglycerides， diglycerides， phospholipids， and ceramides. And 12 metabolites were down-regulated， mainly including amino acid and phosphate metabolites. Pathway enrichment analysis of the above differential metabolites indicated that the metabolic pathways were mainly enriched in folate biosynthesis， terpenoid skeleton biosynthesis， glycerophospholipid metabolism， vitamin B₆ metabolism， glycerolipid metabolism and sphingolipid metabolism. These pathways were involved in multiple processes such as lipid transport， insulin resistance， and energy metabolism. ConclusionThe method of STZ injection combined with photochemical induction can successfully establish a mouse model of cerebral infarction with Qi and Yin deficiency syndrome， and intervene in vivo processes such as folate biosynthesis， glycerophospholipid metabolism， and glycerolipid metabolism.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo explore the construction and evaluation methods of a rat model of acute myocardial infarction（AMI） with Qi and Yin deficiency syndrome established by sleep deprivation combined with coronary artery ligation. MethodsThirty-six SD rats were randomly divided into a normal group（n=6）， a myocardial infarction group（model A group， n=10）， an acute sleep deprivation+myocardial infarction group（model B group， n=10）， and a chronic sleep deprivation+myocardial infarction group（model C group， n=10） according to body weight. Rats in the normal group were not treated， rats in the model A group underwent only ligation of the left anterior descending coronary artery， rats in the model B group were sleep deprived for 96 h and then underwent ligation of the left anterior descending coronary artery， and rats in the model C group were sleep deprived for an additional 48 h each week with a 24 h rest period as one cycle for three weeks on the basis of the model B group. After coronary artery ligation in the model C group， the first week was defined as the starting point of the first sleep deprivation cycle， and indexes were tested weekly for rats in each group for 3 weeks. Electrocardiogram was used to determine the ligation of the left anterior descending coronary artery in rats， and small animal echocardiography was used to evaluate the cardiac function. The levels of serum creatine kinase（CK）， creatine kinase isoenzyme（CK-MB）， lactate dehydrogenase（LDH）， cardiac troponin T（cTnT）， interleukin-18（IL-18）， and tumor necrosis factor-α（TNF-α） were detected by biochemical assays， and hematoxylin-eosin（HE） staining was used to evaluate the pathological changes of myocardial tissue in rats. The syndrome indicators of Qi and Yin deficiency were evaluated by general state and body weight， grip strength， facial temperature， paw temperature， rectal temperature， salivary flow rate， open field test， tongue color［red（R）， green（G）， and blue（B）］ values， pulse amplitude changes， and enzyme-linked immunosorbent assay（ELISA） for the detection of expression levels of cyclic adenosine monophosphate（cAMP）， cyclic guanosine monophosphate（cGMP）， rat serum corticotropin-releasing factor（CRF）， adrenocorticotropic hormone（ACTH）， triiodothyronine（T3）， tetraiodothyronine（T4）， and corticosterone（CORT） in serum. ResultsIn terms of disease indicators， compared with the normal group， the ST segment of the electrocardiogram in each model group was significantly elevated， the echocardiographic parameters were decreased， the contents of myocardial enzymes and inflammatory factors were increased（P<0.01）， and the myocardial tissue in the infarcted area was significantly damaged. In terms of syndrome indicators， compared with the normal group， the body weight of rats in the model B and C groups decreased at each time point， the grip strength of each model group decreased， the total distance traveled and the number of entries into the center in the open field test decreased， the immobility time increased， the facial and rectal temperatures of rats in the model B and C groups increased， the salivary flow rate of each model group decreased， the tongue color was bright red or light， the tongue body was dry or smooth like a mirror， lacking of moisture sensation， the R， G and B values of the tongue surface increased， the pulse amplitude changes decreased， and the contents of T3 and T4 increased， while the expressions of cAMP， CRF， ACTH and CORT in the model B and C groups increased（P<0.05， P<0.01）. ConclusionContinuous sleep deprivation for 96 h in a multi-platform method combined with coronary artery ligation can construct a rat model of AMI with Qi and Yin deficiency syndrome， and the syndrome manifestations can be maintained for 3 weeks.