Objective To analyze three-dimensional imaging characteristics and advantages for severe portal vein stenosis after liver transplantation, and to evaluate clinical efficacy of portal vein stent implantation. Methods Clinical data of 10 patients who received portal vein stent implantation for severe portal vein stenosis after liver transplantation were retrospectively analyzed. Imaging characteristics of severe portal vein stenosis, and advantages of three-dimensional reconstruction imaging and interventional treatment efficacy for severe portal vein stenosis were analyzed. Results Among 10 patients, 3 cases were diagnosed with centripetal stenosis, tortuosity angulation-induced stenosis in 2 cases, compression-induced stenosis in 2 cases, long-segment stenosis and/or vascular occlusion in 3 cases. Three-dimensional reconstruction images possessed advantages in accurate identification of stenosis, identification of stenosis types and measurement of stenosis length. All patients were successfully implanted with portal vein stents. After stent implantation, the diameter of the minimum diameter of portal vein was increased [(6.2±0.9) mm vs. (2.6±1.7) mm, P<0.05], the flow velocity at anastomotic site was decreased [(57±19) cm/s vs. (128±27) cm/s, P<0.05], and the flow velocity at the portal vein adjacent to the liver was increased [(41±6) cm/s vs. (18±6) cm/s, P<0.05]. One patient suffered from intrahepatic hematoma caused by interventional puncture, which was mitigated after conservative observation and treatment. The remaining patients did not experience relevant complications. Conclusions Three-dimensional visualization technique may visually display the location, characteristics and severity of stenosis, which is beneficial for clinicians to make treatment decisions and assist interventional procedures. Timely implantation of portal vein stent may effectively reverse pathological process and improve portal vein blood flow.

Objective:To observe the clinical efficacy of customized titanium mesh combined with concentrated growth factors(CGF)for restoration of anterior alveolar ridge defects.Methods:105 patients with anterior alveolar ridge defects were included and underwent implant restoration.The patients were classified into 2 groups by random number table method,those in control group(n=53)received customized titanium mesh,in study group(n=52)received customized titanium mesh combined with CGF.After 1 year follow-up,the success rate of implantation,alveolar ridge height,alveolar ridge bone augmentation,alveolar bone mineral density,bone thickness,aesthetic results and complications were compared between the 2 groups.Results:In 1-year follow-up,no implant loosening and shed-ding occurred in the 2 groups,and the success rate of implantation was 100％.The height of the alveolar ridge,the horizontal bone aug-mentation,the alveolar bone mineral density and bone thickness of study group were greater than those of the control group(P＜0.05).Study group scored higher on pink aesthetic/white aesthetic score(PES/WES)than control group(P＜0.05).In study group,there were 2 cases of postoperative swelling and pain,2 cases of periodontal infection,1 case of gingival bleeding and 1 of allergy.In control group,there was 1 case of postoperative swelling,1 of pain,1 of gingival bleeding,1 of allergy and 2 of periodontal infection(P＞0.05).Conclusion:Application of customized titanium mesh combined with CGF for restoration of anterior alveolar ridge defects can improve the height of the alveolar ridge and bone metabolism,ensure the aesthetic results.

Objective To explore the interventional effect of repetitive transcranial magnetic stimulation (rTMS) on tardive dyskinesia (TD) in schizophrenic patients. Methods A total of 105 schizophrenic patients were selected as subjects and randomly divided into 1 Hz treatment group, 10 Hz treatment group and control group, with 35 patients in each group. All three groups received rTMS treatment for 12 weeks. The Abnormal Involuntary Movement Scale (AIMS), Scale for the Assessment of Negative Symptoms (SANS), Positive and Negative Syndrome Scale (PANSS) and Treatment Emergent Symptom Scale (TESS) scores were compared among the three groups. Physiological indicators such as electrocardiogram, blood routine, blood biochemistry and hormone levels were monitored. Results After treatment, the total AIMS scores in the 1 Hz and 10 Hz treatment groups were significantly lower than before treatment, and those in the 1 Hz and 10 Hz treatment groups were significantly lower than those in the control group (P < 0.05). The reduction rates of AIMS scores in the 1 Hz and 10 Hz treatment groups were 68.6% and 65.7%, respectively, which were significantly higher than the 22.9% in the control group (P < 0.05). After treatment, the total SANS and PANSS scores in the 1 Hz and 10 Hz treatment groups were significantly lower than before treatment, and those in the 1 Hz and 10 Hz treatment groups were significantly lower than those in the control group (P < 0.05). There was no statistically significant difference in the total AIMS score, efficacy and total PANSS score between the 1 Hz and 10 Hz treatment groups (P>0.05). There were no significant differences in the total TESS scores and physiological indicators among the three groups before and after treatment (P>0.05). Conclusion Both 1 Hz and 10 Hz rTMS can effectively improve TD in schizophrenic patients with good safety and have no significant side effects or physiological damage.

Objective:To investigate the clinical effect of 3D printing combined with O-arm navigation assisted posterior hemivertebrae resection and orthopedic fixation in the treatment of congenital cervicothoracic scoliosis.Methods:A retrospective study was conducted on the clinical data of 14 patients with congenital cervicothoracic kyphosis caused by hemivertebra treated in Henan Provincial People's Hospital from January 2015 to June 2021, including 9 males and 5 females, aged 8.9±3.2 years (range, 1-15 years). Operation time, intraoperative blood loss and fusion stage were recorded. Intraoperative O-arm scanning and postoperative CT scanning were performed to evaluate the accuracy of nail placement. The cervicothoracic scoliosis Cobb angle, compensatory scoliosis Cobb angle, local kyphosis Cobb angle, torticollis angle, T 1 tilt angle and clavicular angle were measured before operation, model design, 1 week after operation and at the last follow-up to evaluate the effect of surgical design, intraoperative orthosis and the correction loss at follow-up. The Society for Scoliosis Research-22 (SRS-22) questionnaire was used to evaluate the functional and treatment effect. At the last follow-up, the osteotomy fusion was evaluated by Eck criterion. Results:All patients successfully completed the operation, the operation time was 228.5±41.8 min, the intraoperative blood loss was 355.6±46.7 ml, and the number of fusion segments was 5.5±0.8. Follow-up duration was 35.5±13.2 months. A total of 140 pedicle screws were inserted, with an accuracy of 97.1% (136/140). The Cobb angle of cervicothoracic scoliosis was 53.9°±17.9° preoperatively, 11.3°±4.4° in the model design, 10.8°±2.6° one week postoperatively, and 14.5°±3.5° at the last follow-up, with statistical significance ( P<0.001). The preoperative and postoperative one week difference was statistically significant ( P<0.001) with a correction rate of 78.6%±6.7%. The Cobb angle of compensatory scoliosis was 33.1°±12.1° before surgery, 11.9°±2.4° for model design, 10.5°±3.4° for one week after surgery, and 14.1°±2.5° for the last follow-up, with statistically significant differences ( P<0.001). The postoperative correction rate was 65.2%±16.2%. The Cobb angle of local kyphosis was 27.8°±9.8° preoperatively, 10.1°±2.1° in the model design, 9.8°±1.9° one week postoperatively, and 12.7°±1.6° at the last follow-up, with statistical significance ( P<0.001). The preoperative and postoperative one week difference was statistically significant ( P<0.001) with a correction rate of 59.2%±18.9%. The preoperative and postoperative one week difference was statistically significant ( P<0.001) with a correction rate of 78.6%±6.7%. The neck tilt angle was 20.6°±6.7° preoperatively, 6.2°±1.9° in the model design, 5.9°±2.1° one week postoperatively, and 7.1°±1.4° at the last follow-up, with statistical significance ( P<0.001). The preoperative and postoperative one week difference was statistically significant ( P<0.001) with a correction rate of 70.0%±11.1%. The T 1 inclination angle was 20.2°±5.8° preoperatively, 11.5°±3.1° in the model design, 10.2°±2.3° one week postoperatively, and 9.5°±3.0° at the last follow-up, with statistical significance ( P<0.001). The preoperative and postoperative one week difference was statistically significant ( P<0.001) with a correction rate of 53.2%±10.4%. There was no significant difference between preoperative design and actual measurement one week after surgery ( P>0.05). At the last follow-up, the scores of self-image (4.6±0.7), mental health (4.7±0.6) and treatment satisfaction (4.6±0.6)in SRS-22 scale were significantly improved compared with those before operation ( P<0.05). The symptoms of hemivertebra ipilateral C 8 nerve root injury occurred in 1 patient, who was treated conservatively with dehydration, hormones and nutraceutical drugs, and recovered to normal at 3 months follow-up. At the last follow-up, the appearance of the head, neck and shoulders of the patients was improved compared with that before surgery, the bone grafts have achieved osseous fusion in all patients. All fusion were grade I by Eck criterion. No complications such as serious neurological or vascular injury occurred during perioperative period. No pseudoarthrosis formation, internal fixation loosening or fracture occurred during follow-up. Conclusion:The application of 3D printing combined with O-arm navigation assistance technology in posterior hemivertebra resection and correctional surgery for cervicothoracic hemivertebra deformities can display the deformities in advance, stereoscopic and real-time, accurately place pedicle screws and complete hemivertebra resection, improve surgical safety and deformity correction rate.

Objective To summarize the diagnosis and treatment experience of portal vein aneurysm after liver transplantation. Methods Clinical data of two recipients with portal vein aneurysm after liver transplantation were retrospectively analyzed. Clinical features, diagnosis, treatment and prognosis were summarized based on literature review. Results Both two cases were diagnosed with intrahepatic portal vein aneurysm complicated with portal vein thrombosis and portal hypertension after liver transplantation. Case 1 was given with targeted conservative treatment and he refused to undergo liver retransplantation. Physical condition was worsened after discharge, and the patient eventually died from liver graft failure, kidney failure, lung infection, and septic shock. Case 2 received high-dose glucocorticoid pulse therapy, whereas liver function was not improved, and the patient was recovered successfully after secondary liver transplantation. Conclusions Long-term complication of portal vein aneurysm (especially intrahepatic type) after liver transplantation probably indicates poor prognosis. Correct understanding, intimate follow-up and active treatment should be conducted. Liver retransplantation may be a potential treatment regimen.

Objective:To investigate the clinical efficacy and precautions of O-arm combined with navigation-assisted steotomy and hemivertebra resection for congenital cervicothoracic hemivertebra.Methods:From February 2016 to October 2020, the clinical data of 12 patients with cervicothoracic hemivertebra admitted in Henan Provincial People's Hospital were retrospectively analyzed, including 5 males and 7 females, aged 9.4±2.6 years (range, 4-15 years). Intraoperative neural monitoring system was used to ensure the safety of surgical correction process and O-arm navigation system assisted the implantation of pedicle screws,hemivertebra resection, and scoliosis deformity correction. Postoperative CT was used to evaluate the accuracy of screw placement, and routine preoperative and postoperative X-ray films of the full-length spine in standing position were taken to measure the coronal and sagittal Cobb angles. The correction rate of scoliosis and kyphosis, internal fixation, shoulder height difference and bone graft fusion were calculated at the final follow-up.Results:A total of 108 pedicle screws were inserted in 12 patients, and the screw placement accuracy rate was 96.3% (104/108). The follow-up time was 37.9±10.2 months (range, 24-61 months). The number of fused segments was 5.4±1.1 (range, 4-7). One week after surgery, the correction rate of Cobb angle was 78.5%±3.2% for scoliosis and 70.1%±5.4% for kyphosis. There were statistically significant differences in side and kyphosis Angle and Scoliosis Research Society (SRS)-22 score between preoperative and 1 week after surgery ( P<0.05). There was no significant difference between the operation and the last follow-up ( P>0.05). At the last follow-up, all the 12 patients achieved gradeⅠ fusion. SI was 2.4±0.8 cm before operation, 1.0±0.6 cm at 1 week after operation, and 0.7±0.5 cm at last follow-up, and the difference was statistically significant ( F=38.30, P<0.001). No pseudojoint formation, significant loss of correction Angle, or rupture of internal fixation relaxant occurred during the operation or during follow-up. Conclusion:O-arm combined with navigation-assisted steotomy and hemivertebra resection for the treatment of congenital cervicothoracic hemivertebra has the advantages of good orthopedic effect, reduced radiation exposure and fewer complications, and accurate pedicle screw implantation and hemivertebra resection.

Polymyxin B, which is a last-line antibiotic for extensively drug-resistant Gram-negative bacterial infections, became available in China in Dec. 2017. As dose adjustments are based solely on clinical experience of risk toxicity, treatment failure, and emergence of resistance, there is an urgent clinical need to perform therapeutic drug monitoring (TDM) to optimize the use of polymyxin B. It is thus necessary to standardize operating procedures to ensure the accuracy of TDM and provide evidence for their rational use. We report a consensus on TDM guidelines for polymyxin B, as endorsed by the Infection and Chemotherapy Committee of the Shanghai Medical Association and the Therapeutic Drug Monitoring Committee of the Chinese Pharmacological Society. The consensus panel was composed of clinicians, pharmacists, and microbiologists from different provinces in China and Australia who made recommendations regarding target concentrations, sample collection, reporting, and explanation of TDM results. The guidelines provide the first-ever consensus on conducting TDM of polymyxin B, and are intended to guide optimal clinical use.
Humans ; Anti-Bacterial Agents/therapeutic use* ; China ; Drug Monitoring/methods* ; Polymyxin B ; Practice Guidelines as Topic

Objective:To investigate the serum levels of soluble growth stimulation expression gene 2 protein (sST2) and inflammatory factors in patients with acute left ventricular ejection fraction reduction heart failure (HFrEF) treated with sacubitril/valsartan.Methods:Ninety six patients with acute HFrEF admitted in The Affiliated Hospital of Qingdao University from March 2020 to March 2021 were enrolled. The patients were treated with sacubitril/valsartan,the dose was gradually increased from 50 mg b.i.d to the target dose of 200 mg b.i.d according to hemodynamics. After 12 weeks, the target dose was achieved in 72 cases (compliance group), and did not achieved in 24 cases (non-compliance group). The serum levels of sST2, IL-1β, IL-6, TNF-αand IL-10 were measured and compared between the two groups. The changes in left atrial anteroposterial diameter (LA), left ventricular end-diastolic diameter (LVDd) and left ventricular ejection fraction (LVEF) values were assessed with echocardiography. The adverse reactions, readmission rate and all-cause death within 3 months after discharge were compared between the two groups.Results:A total of 96 patients with acute HFrEF completed the follow-up, including 72 patients (75.0%) in the compliance group and 24 (25.0%) in the non-compliance group; aged 50-75 (66.1±6.7) years old, and 68 (70.8%) males. After treatment, the serum levels of sST2, IL-1β, IL-6 and TNF-α were decreased, and the IL-10 level was increased in both groups ( P<0.05); while the improvement of serum indicators in the compliance group was more marked ( P<0.05). Echocardiography showed that the LA, LVDd, and LVEF were significantly increased after treatment ( P<0.05) in compliance group, while there was no significant changes before and after treatment in the non-compliance group. SST2, inflammatory factors and echocardiographic measurements of patients in the standard group had statistical significance before and after treatment ( P<0.05), and the difference showed a downward trend. No deterioration of renal function and angioedema were observed in both groups, and there was no significant difference in hyperkalemia (two in compliance group and one in non-compliance group), symptom hypotension (each in two groups) between the two groups (χ 2=0.12, 0.68; P>0.05). In the non-compliance group, 10 patients (41.7%) were readmitted due to heart failure, and 6 patients (25.0%) died; while there were no readmitted cases or fatal cases in compliance group (χ 2=33.49, 19.20; P<0.05). Conclusion:Early application of sacubitril and valsartan sodium in patients with acute HFrEF after hemodynamic stabilization can significantly improve left ventricular remodeling, for those with earlier escalation to the target dose, it is more beneficial. The changes of serum sST2 and inflammatory factor level after treatment may predict the efficacy of sacubitril/valsartan therapy.

Objective:To explore the scheme of accurate pelvic osteotomy parameters and to analyze the feasibility and efficacy of 3D printing navigation plate in developmental dysplasia of the hip surgery.Methods:From January 2015 to December 2017, a total of 18 children with DDH underwent computer-assisted Salter pelvic osteotomy (computer-assisted osteotomy group) and 25 children with DDH who underwent conventional Salter pelvic osteotomy (conventional osteotomy group) were selected for retrospective analysis. There were 11 males and 32 females with an average age of 3.2±2.5 (range 1-11) years. According to International Hip Dysplasia Institute (IHDI) classification, there were 20 cases of type 1, 9 of type 2, 12 of type 3 and 2 of type 4. All patients were unilateral dislocation, including 18 cases on the left and 25 on the right. All children underwent pelvic CT examination before operation. Further, the proximal femur was surgically corrected during the operation. According to the acetabular rotation angle (ATA) and bony acetabular index (BAI), the computer-assisted osteotomy group simulated the operation with Mimics software made 3D printing navigation plate through which an accurate osteotomy scheme was developed. The two groups were compared in operative duration, intraoperative blood loss, Japanese Orthopaedic Association (JOA) hip joint score. Acetabular index (AI), central edge (CE) angle, and acetabulum head index (AHI) were compared between the two groups by using postoperative X-ray. The acetabular tilt angle (ATA) changes before and after operation in the computer-assisted osteotomy group were compared through 3D CT.Results:The follow-up duration was 2.3±0.2 (2.0 to 2.5) years in the computer-assisted osteotomy group and 2.8±0.15 (2.5 to 3.0) years in the conventional osteotomy group. The operative duration in the computer-assisted osteotomy group was 127±20.6 min, which was significantly longer ( t=4.657, P<0.001) than that in the conventional osteotomy group (103±13.2 min). Intraoperative bleeding was 157±17.5 ml in the computer-assisted osteotomy group and 151±15.3 ml in the conventional osteotomy group without significant difference between the two groups ( t=1.195, P=0.239). At 2 years after surgery, the JOA score of the hip joint in the computer-assisted osteotomy group (86.7±8.5 points) was like that (84.8±10.0 points) in the conventional osteotomy group ( t=0.628, P=0.533). At the last follow-up, the CE angle in the computer-assisted osteotomy group (36.8°±5.2°) was significantly larger than that (31.8°±4.4°) in the conventional osteotomy group ( t=3.414, P<0.001). There was statistically significant difference in term of AHI between the computer-assisted osteotomy group (85.8%±6.6%) and the conventional osteotomy group (80.4%±8.3%, t=2.284, P=0.028). AI was 23.5°±5.5° in the computer-assisted osteotomy group and 25.2°±4.2° in the conventional osteotomy group without significant difference ( t=-1.150, P=0.257). The ATA of the affected side was 12.3°±1.4° in the computer-assisted osteotomy group which was similar ( t=0.614, P=0.547) to that of the healthy side (11.8°±2.8°). Conclusion:Based on specific anatomical parameters, computer-assisted preoperative planning can not only directly simulate the process of osteotomy, but also produce individualized 3D printed guide plates. Compared with conventional Salter pelvic osteotomy, computer-assisted osteotomy can achieve accurate radiographic correction of the hip joint in children with DDH, resulting in a better matching relationship between the femoral head and acetabulum.

Objective:To analyze the cause of varicocele (VC) recurrence and investigate the efficacy of sub-inguinal microsurgical varicocelectomy (MV) for recurrent VC.Methods:All of 16 inpatients diagnosed as recurrent VC, in the Department of Andrology of the Affiliated Hospital of Qingdao University from 2015 April to 2019 April, were performed sub-inguinal MV. The age of the inpatients was 18-36 years old, median 27 years old.5 cases were originally performed retroperitoneal high ligation of spermatic vein and other 11 cases were originally performed laparoscopic varicocelectomy. During the review one to three years after the previous operation, all of 16 patients were diagnosed as VC recurrence. The complains of these patients during the review included male subfertility (10 cases) and scrotal pain (12 cases), in which 6 cases’ complains were male subfertility with scrotal pain. After admission, 13 patients were classified as Grade Ⅲ (left in 8 cases, bilateral in 5 cases) and 3 patients as Grade Ⅱ (all left). The median of their visual analogue scale (VAS) was 2.5. Color doppler flow imaging (CDFI) grading showed: Grade Ⅲ in 12 cases (left in 7 cases, bilateral in 5 cases), Grade Ⅱ in 4 cases (all left). Particularly, 12 of them were Graded as Ⅲ simultaneously accompanying with Nut-cracker Phenomenon (NCP). Preoperative tests showed that the average serum testosterone was (16.2±4.9)nmol/ml, the average sperm concentration was (11.8±3.9)×10 6/ml and the progressive motility rate (PR) was (24.4±4.2)%. All of the patients were performed sub-inguinal MV using general anesthesia and supine position. The spermatic cords were clearly exposed and padded up by inserting gauze strips under them. During the operation, the field was magnified 4-6 times with the microscope. Then all of the dilated external and internal spermatic veins were ligated, at the same time the internal spermatic artery and lymph vessels were well preserved. During these operations, 11 patients underwent left-side MV, while other 5 did bilateral MVs. During these MVs, we found twisted and dilated external and internal spermatic veins in all cases and well preserved the internal spermatic arteries and lymph vessels. The number of ligated left and right external spermatic veins were(2.1±0.6) and (1.4±0.5)respectively and the number of ligated left and right internal spermatic veins were (10.1±1.1) and (6.6±0.5) respectively. We also found out(1.3±0.5) internal spermatic arteries and (3.0±1.0)lymph-vessels on left side. On right side, there were (1.4±0.5) internal spermatic arteries and (2.6±0.5) lymph-vessels respectively. At last, we summarily analyzed the pre-operative and post-operative VAS, serum testosterone, CDFI and semen analysis data. Results:All of the 16 sub-inguinal MVs were successfully performed. All patients were reviewed comprehensively 6 months after MV. The reviewed results showed that the post-operative VAS was significantly reduced ( Z=-2.994, P<0.05), palpable scrotal vessels disappeared and Valsalva tests were negative. No obvious reflux of internal spermatic veins were detected by CDFI. Interestingly, the sperm concentration and motility were both significantly improved 6 months after MV ( P<0.05), while there was not remarkable increase of the serum testosterone after MV ( P>0.05). During the follow up, no testicular atrophy, hydrocele and other complications were found. Up to submission, five of the ten patients who presented for male subfertility have impregnated their wives. Conclusions:The most possible cause of VC recurrence could be the omission of the external and internal spermatic veins, particularly in the grade Ⅲ VC patients or VC accompanied with NCP. The sub-inguinal MV, which can discover more twisted spermatic veins and at the same time preserve the spermatic artery and lymph-vessels, shows better clinical efficacy than other procedures.