ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

Objective To investigate the mechanisms of miRNA-15a and miRNA-16 in the process of reversing cisplatin resistance in ovarian cancer.Methods Human ovarian cancer cisplatin-resistant cell lines CoC1/DDP were transfected with miRNA-15a and miRNA-16 mimics and treated with cisplatin.qRT-PCR was used to detect the expression levels of miRNA-15a and miRNA-16 in normal CoC1/DDP cell group,cisplatin treated group,negative control group,miRNA-15a transfected group,miRNA-16 transfected group and overexpressed Bmi-1 plasmid.Western blot was used to detect the expression level of Bmi-1 in each group,CCK-8 and Annexin V/PI were used to detect cell survival and apoptosis,and γ-H2AX immunofluorescence was used to detect cell apoptosis.Results The CoC1/DDP ovarian cancer cell line shows low expression of miRNA-15a and miRNA-16,and high expression of Bmi-1 protein,which makes it resistant to cisplatin.When the levels of miRNA-15a and miRNA-16 are overexpressed,the Bmi-1 protein decreases(P<0.05),leading to a decrease in cell survival rate(P<0.05),a significant increase in DNA apoptosis(P<0.05),and more severe DNA damage(P<0.05).Overexpression of Bmi-1 plasmid can increase cell viability(P<0.05)and reduce the rate of cell apoptosis(P<0.05).Conclusion The Bmi-1 protein may be a target for the regulation of miRNA-15a and miRNA-16,and overexpression of miRNA-15a and miRNA-16 can increase the sensitivity of ovarian cancer cells to cisplatin by reducing the Bmi-1 protein.This provides a new idea for predicting molecular markers of cisplatin resistance in ovarian cancer and overcoming drug resistance targets in ovarian cancer.

It is an urgent demand worldwide to control the coronavirus disease 2019 (COVID-19) pandemic caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus. The 3-chymotrypsin-like protease (3CL^pro) and papain-like protease (PL^pro) are key targets to discover SARS-CoV-2 inhibitors. After screening 12 Chinese herbal medicines and 125 compounds from licorice, we found that a popular natural product schaftoside inhibited 3CL^pro and PL^pro with IC₅₀ values of 1.73 ± 0.22 and 3.91 ± 0.19 μmol/L, respectively, and inhibited SARS-CoV-2 virus in Vero E6 cells with EC₅₀ of 11.83 ± 3.23 μmol/L. Hydrogen-deuterium exchange mass spectrometry analysis, quantum mechanics/molecular mechanics calculations, together with site-directed mutagenesis indicated the antiviral activities of schaftoside were related with non-covalent interactions with H41, G143 and R188 of 3CL^pro, and K157, E167 and A246 of PL^pro. Moreover, proteomics analysis and cytokine assay revealed that schaftoside also regulated immune response and inflammation of the host cells. The anti-inflammatory activities of schaftoside were confirmed on lipopolysaccharide-induced acute lung injury mice. Schaftoside showed good safety and pharmacokinetic property, and could be a promising drug candidate for the prevention and treatment of COVID-19.

Objective: To analyze vaccination situation of oral live attenuated rotavirus vaccine (LLR strain) among children from six provinces in China. Methods: In 2014, we selected 12 counties in Guangdong, Jiangsu, Chongqing, Jiangxi, Heilongjiang and Gansu provinces by using stratified cluster random sampling method and extract information of children born from January 1, 2008 to December 31, 2012 from Children's Immunization Information System. We investigated ten children of each birth cohort in each county by checking the vaccination certification, and a total of 606 children were investigated. A survey was conducted to check the information of the children's vaccination certification with the data of Children's Immunization Information System by questionnaire including the basic information (province, county, name, gender, birth date, etc) and the rotavirus vaccination (vaccination date, dose, etc) to analyze the rotavirus vaccination situation. Results: 340 of 606 children were male. There were 121, 124, 122, 119 and 120 children born in 2008-2012, respectively. The proportions of the first and the second dose of rotavirus vaccination were 32.8% (199) and 9.7% (59). The proportion of the third dose of rotavirus vaccination among children born between 2008 and 2010 was 3.5% (13) since children born in 2011 and 2012 did not reach the age of third dose vaccination. The proportion of the first dose of rotavirus vaccination in high, middle and low per capita disposable income areas was 45.0% (91), 37.7% (77) and 15.5% (31) respectively (χ²= 43.15, P<0.001). Among 199 children vaccinated with the first dose of vaccine, the vaccination age mainly concentrated in 2 to 21 months, of which the peak was 5 to 13 months (66.8%, 133). The intervals between 2 doses of vaccination were mainly from 12 to 13 months (42.4%, 25) among the 59 children who received at least 2 doses of vaccine. In the 13 children vaccinated with 3 doses, the intervals between the second and the third dose were 12 months (5). Of the 271 doses of rotavirus vaccine vaccinated during 2008-2014, 34.7% (94 doses) were vaccinated in June-August, 88 were vaccinated simultaneously with 18 other vaccines, accounting for 32.5% of the total. Of the 18 other vaccines, inactivated vaccines such as diphtheria vaccine (30 doses), Hib vaccine (14 doses), group A meningitis vaccine (10 doses) were predominant. Conclusion The proportion of rotavirus vaccination was low and the vaccination age was relatively late. The vaccination mode was different from the recommendation of WHO. It is recommended that routine immunization of rotavirus vaccines should be carried out in early-months of children.

This study aimed at the molecular mechanism of Cordyceps sinensis polysaccharide-A(CPS-A) on angiotensin (Ang Ⅱ)-induced injury of L02 cells.The effect of AngⅡ and CPS-A on the proliferation of L02 cells was analyzed by MTT assay.PCR,Real-Time PCR and Western blot were also employed to determine the expression of IL-1β,AT1R,AT2R,NF-κB p65,TNFα and other inflammatory factors at mRNA and protein levels.The results showed that Ang Ⅱ and CPS-A could inhibit the proliferation of L02 cells by 1 × 10-5 mol/L and 200 μg/ mL,respectively.PCR,Real-Time PCR and Western blot showed that CPS-A could significantly down-regulate IL-1 β,TNF-α,NF-κB and AT1R.CPS-A has a good protective effect on AngⅡ-induced L02 cell injury.

Objective To study the current situation of fast-track surgery nursing in the department of urology,in order to provide theory basis for nursing clinical research and practice in the development of urology in the future.Methods The data were collected from American PubMed database,domestic Wanfang database and CNKI from May to August 2016. The bibliometric analysis was used to analyze all collected research literatures about fast-track surgery nursing in the department of urology according to country,year,disease classification,publication and so on.Results From January 1st,1995 to August 17th,2016,a total of 96 research articles about fast-track surgery nursing in the department of urology were collected from the databases of PubMed,Wanfang and CNKI. There were 73 Chinese articles,accounting for 76.04%. The research themes were kidney disease (41.67%),bladder disease (35.42%) and prostate disease (14.58%). The postoperative fast-track surgery of urinary system tumor accounted for 65% in the domestic and foreign research.Conclusions The fast-track surgery of kidney and bladder diseases is the hotspot of study. The renal tumor radical operation and the urinary bladder carcinoma radical operation with urinary diversion are hot research directions of fast-track surgery. Randomized control method used in clinical patients is the main research method for the application of fast-track surgery concept.

Objective To investigate the relationship of Maternal-fetal interface local cytokine GM-CSF and its receptor with the occurrence of early spontaneous abortion. Methods From August 2009 to December 2011,we collected 30 villi tissue samples with artificial abortion and 30 villi tissue samples with spontaneous abortion. At the same time, we collected 30 villi tissue samples with artificial abortion and 30 decidua tissue samples with spontaneous abortion,and 30 decidua tissue samples with spontaneous abortion. The human chorionic gonadotropin ( HCG) was detected by radioimmunoassay in every group. The expressions of granulocyte-macrophage colony-stimulating factor (GM-CSF) and granulocyte-macrophage colony-stimulating factor receptor (GM-CSFR ) were detected by Immunohistochemical staining and Western Blot in the villi tissue and decidua tissue in every group. Results The concentration of HCG in the spontaneous abortion group was lower than that in the artificial abortion group ( <0.05) . The protein expressions of GM-CSF and GM-CSFR were found in villus and deciduas tissues in both groups. The protein expression levels of GM-CSFR in the villus tissues were higher in spontaneous abortion group than those in artificial abortion group ( <0.05), the protein expression of GM-CSF was upregulated, but there was no statistically significant difference between two groups. In deciduas tissues, the protein expressions of GM-CSF and GM-CSFR were upregualted in spontaneous abortion group ( <0.05) . Conclusions The suitable concentrations of GM-CSF and GM-CSFR in decidua tissue maintain the pregnancy continued. However,the higher concentrations of GM-CSF and GM-CSFR in the decidua tissue may be one of reasons of spontaneous abortion.