AIM:To analyze differential proteins associated with the pathogenesis of dry eye(DE)using bioinformatics methods, in order to reveal their potential molecular mechanisms.METHODS: Articles published in PubMed and EMBASE databases from the inception of the database to August 31, 2023, that used proteomic methods to detect protein expression in clinical samples of dry eye were searched. Differential proteins were selected and further analyzed using the STRING database and Cytoscape software for hub gene screening and module analysis. Protein-protein interaction(PPI)analysis, gene ontology(GO)functional annotation, and Kyoto encyclopedia of genes and genomes(KEGG)pathway enrichment analysis were performed.RESULTS: A total of 21 articles were included, identifying 74 differentially expressed proteins. The most frequently occurring differential proteins were calgranulin A(SA1008), lipocalin-1(LCN1), lysozyme C(LYZ), mammaglobin-B(SCGB2A1), proline-rich protein 4(PRR4), transferrin(TF), and calgranulinB(S100A9). The top 10 hub genes were serum albumin(ALB), tumor necrosis factor(TNF), interleukin 6(IL6), IL1B, IL8, matrix metalloproteinase 9(MMP9), alpha-1-antitrypsin(SERPINA1), IL10, complement component 3(C3), and lactotransferrin(LTF). Module analysis suggested MMP9 and PRR4 as seed genes. KEGG analysis showed that differential proteins were mainly enriched in the IL17 signaling pathway(61.9%).CONCLUSION: The results reveal potential molecular targets and pathways for DE and confirm the association between the pathogenesis of DE and inflammation. Further in-depth research is needed to confirm the significance of these biomarkers in clinical practice.

Bacterial biofilms gave rise to persistent infections and multi-organ failure, thereby posing a serious threat to human health. Biofilms were formed by cross-linking of hydrophobic extracellular polymeric substances (EPS), such as proteins, polysaccharides, and eDNA, which were synthesized by bacteria themselves after adhesion and colonization on biological surfaces. They had the characteristics of dense structure, high adhesiveness and low drug permeability, and had been found in many human organs or tissues, such as the brain, heart, liver, spleen, lungs, kidneys, gastrointestinal tract, and skeleton. By releasing pro-inflammatory bacterial metabolites including endotoxins, exotoxins and interleukin, biofilms stimulated the body’s immune system to secrete inflammatory factors. These factors triggered local inflammation and chronic infections. Those were the key reason for the failure of traditional clinical drug therapy for infectious diseases.In order to cope with the increasingly severe drug-resistant infections, it was urgent to develop new therapeutic strategies for bacterial-biofilm eradication and anti-bacterial infections. Based on the nanoscale structure and biocompatible activity, nanobiomaterials had the advantages of specific targeting, intelligent delivery, high drug loading and low toxicity, which could realize efficient intervention and precise treatment of drug-resistant bacterial biofilms. This paper highlighted multiple strategies of biofilms eradication based on nanobiomaterials. For example, nanobiomaterials combined with EPS degrading enzymes could be used for targeted hydrolysis of bacterial biofilms, and effectively increased the drug enrichment within biofilms. By loading quorum sensing inhibitors, nanotechnology was also an effective strategy for eradicating bacterial biofilms and recovering the infectious symptoms. Nanobiomaterials could intervene the bacterial metabolism and break the bacterial survival homeostasis by blocking the uptake of nutrients. Moreover, energy-driven micro-nano robotics had shown excellent performance in active delivery and biofilm eradication. Micro-nano robots could penetrate physiological barriers by exogenous or endogenous driving modes such as by biological or chemical methods, ultrasound, and magnetic field, and deliver drugs to the infection sites accurately. Achieving this using conventional drugs was difficult. Overall, the paper described the biological properties and drug-resistant molecular mechanisms of bacterial biofilms, and highlighted therapeutic strategies from different perspectives by nanobiomaterials, such as dispersing bacterial mature biofilms, blocking quorum sensing, inhibiting bacterial metabolism, and energy driving penetration. In addition, we presented the key challenges still faced by nanobiomaterials in combating bacterial biofilm infections. Firstly, the dense structure of EPS caused biofilms spatial heterogeneity and metabolic heterogeneity, which created exacting requirements for the design, construction and preparation process of nanobiomaterials. Secondly, biofilm disruption carried the risk of spread and infection the pathogenic bacteria, which might lead to other infections. Finally, we emphasized the role of nanobiomaterials in the development trends and translational prospects in biofilm treatment.

Objective To study the pharmacokinetic and pharmacodynamic characteristics of compound levodopa/carbidopa(250 mg/25 mg)and levodopa/benserazide(200 mg/50 mg)in patients with Parkinson's disease(PD).Methods This experiment used a levodopa challenge test with a randomized crossover design.In the first week,20 PD patients orally received either 275 mg of compound levodopa/carbidopa or 250 mg of levodopa/benserazide on an empty stomach,and in the second week,they received the other treatment.The levodopa blood concentration was measured using high-performance liquid chromatography-tandem mass spectrometry,and motor symptoms were evaluated using the Movement Disorder Society-Unified Parkinson's Disease Rating Scale Ⅲ.Results Data from 17 patients in the compound levodopa/carbidopa group and 18 patients in the levodopa/benserazide group was included in the analysis.After administration,the Cmax values of compound levodopa/carbidopa and levodopa/benserazide groups were(3 563.76±1 003.06)and(3 642.44±1 192.70)ng·mL-1;the tmax values were(1.10±0.44)and(1.03±0.55)h;the t1/2 values were(1.52±0.15)and(1.68±0.27)h;the AUC0-t values were(7 625.19±1 706.85)and(5 846.07±1 191.16)ng·mL-1·h;the mean residence time(MRT)values were(2.39±0.361)and(2.14±0.37)h,respectively.There were no statistically significant differences in the Cmax,tmax,and t1/2 values between the two groups(all P＞0.05).Compared with the levodopa/benserazide group,the compound levodopa/carbidopa group increased levodopa AUC and prolonged MRT(all P＜0.05).The improvement in motor symptoms and levodopa blood concentration showed consistent trends at various time points in both groups.The compound levodopa/carbidopa group showed significantly better improvement in motor function at 6 and 8 hours after medication compared to the levodopa/benserazide group[(-10.82±8.91)points vs(-5.17±6.78)points,(-7.88±10.05)points vs(-2.11±4.84)points;both P＜0.05].Conclusion The pharmacokinetic and pharmacodynamic characteristics of compound levodopa/carbidopa are similar to those of levodopa/benserazide.

Objective To investigate the effects of palmatine on migration,invasion and epithelial mesenchymal transformation(EMT)in human oral cancer KB cells.Methods KB cells were divided into control group and palmatine-L,-M,-H groups,cultured with 0,4,8 and 16 μmol·L-1 palmatine.After incubation for 48 h,scratch assay was used to detect migration;Traswell assay was used to detect invasion;matrix metalloproteinase 2(MMP-2),MMP-9 and fibronectin(FN)contents were detected by enzyme-linked immunosorbent assay;the expression of Vimentin,N-cadherin and E-cadherin mRNA were detected by real-time quantitative polymerase chain reaction;the expression of Vimentin,N-cadherin,E-cadherin,Wnt3 and β-catenin protein were detected by Western blot.Results Cell mobility in control group and palmatine-L,-M,-H groups were(69.27±8.62)％,(52.94±4.49)％,(45.22±5.05)％and(37.63±4.88)％;the number of transmembrane cells were 197.33±20.26,125.33±12.01,97.00±9.17 and 62.67±7.51;the content of MMP-2 were(2.93±0.21),(1.49±0.13),(1.16±0.15)and(0.95±0.09)ng·mL-1;the content of MMP-9 were(3.51±0.36),(2.37±0.23),(2.06±0.35)and(1.72±0.16)ng·mL-1;the content of FN were(41.28±4.02),(24.03±3.17),(20.67±2.63)and(13.82±2.19)ng·mL-1;the above indexes in palmatine-L,-M,-H groups were compared with the control group,and the differences were statistically significant(P＜0.05,P＜0.01).The mRNA and protein expressions of Vimentin,N-cadherin and E-cadherin,and the expressions of Wnt3 and β-catenin protein in palmatine-L,-M,-H groups were statistically significant compared with those in control group(P＜0.05,P＜0.01).Conclusion Palmatine can inhibit the migration,invasion and EMT of human oral cancer KB cells,and its mechanism is related to the regulation of Wnt/β-catenin signaling pathway.

Objective To study the bioequivalence of test and reference olmesartan tablet in Chinese healthy subjects after single dose under fasting and fed conditions.Methods A single-center,random,open,single-dose,two-preparations,double-period,crossover study was adopted.A total of 48 healthy adult male and female subjects(24 cases of fasting test and 24 cases of fed test)were included in the random crossover administration.Single oral dose 20 mg of test and reference were taken under fasting and postprandial conditions,respectively.Plasma concentration of olmesartan in plasma were determined by liquid chromatography tandem mass spectrometry.The main pharmacokinetic parameters were calculated by Phoenix WinNonlin 8.0 software.Results The main pharmacokinetic parameters of the test and reference preparations of olmesartan tablets in the fasting group were as follows:Cmax were(653.06±133.53)and(617.37±151.16)ng·mL-1,AUC0-t were(4 201.18±1 035.21)and(4 087.38±889.99)ng·mL-1·h,AUC0-∞ were(4 254.30±1 058.90)and(4 135.69±905.29)ng·mL-1·h.The main pharmacokinetic parameters of the test and reference preparations of olmesartan tablets in the postprandial group were as follows:Cmax were(574.78±177.05)and(579.98±107.74)ng·mL-1,AUC0-t were(3 288.37±866.06)and(3 181.51±801.06)ng·mL-1·h,AUC0-∞ were(3 326.11±874.26)and(3 242.01±823.09)ng·mL-1·h.Under fasting and postprandial conditions,the 90％confidence intervals of the main pharmacokinetic parameters of the test and reference preparations are both 80.00％-125.00％.Conclusion Under fasting and postprandial conditions,a single oral dose of test and reference preparations olmesartan tablets in Chinese healthy adult volunteers showed bioequivalence.

AIM To establish a quantitative analysis of multi-components by single-marker(QAMS)method for the simultaneous content determination of gastrodin,parishin E,syringin,parishin B,parishin C,ferulic acid,parishin A,buddleoside,harpagoside and cinnamic acid in Tianma Toufengling Capsules.METHODS The analysis was performed on a 30℃thermostatic GL Science InertsilTM ODS-3 column(150 mm×4.6 mm,5 μm),with the mobile phase comprising of acetonitrile-0.1%phosphoric acid flowing at 1.0 mL/min in a gradient elution manner,and the detection wavelengths were set at 220,280 nm.Syringin was used as an internal standard to calculate the relative correction factors of the other nine constituents,after which the content determination was made.RESULTS Ten constituents showed good linear relationships within their own ranges(r≥0.999 7),whose average recoveries were 98.53%-102.22%with the RSDs of 1.26%-2.68%.The result obtained by QAMS approximated those obtained by external standard method.CONCLUSION This accurate and specific method can be used for the quality control of Tianma Toufengling Capsules.

ObjectiveAngle-closure glaucoma (ACG) is one of the major eye-blinding diseases. To diagnose ACG, it is crucial to examine the anterior chamber angle. Current diagnostic tools include slit lamp gonioscopy, water gonioscopy, ultrasound biomicroscopy (UBM), and anterior segment optical coherence tomography (AS-OCT). Slit lamp and water gonioscopy allow convenient observation of the anterior chamber angle, but pose risks of invasive operation and eye infections. UBM can accurately measure the structure of the anterior chamber angle. However, it is complex to operate and unsuitable for patients, who have undergone trauma or ocular surgery. Although AS-OCT provides detailed images, it is costly. The aim of this study is to explore a non-invasive, non-destructive optical reflection tomography (ORT) technique. This technique can achieve low-cost three-dimensional imaging and full-field anterior chamber angle measurement of the porcine eye. MethodsThe experiment involved assembling an optical reflection tomography system, which included a complementary metal oxide semiconductor (CMOS) camera, a telecentric system, a stepper motor, and a white light source, achieving a spatial resolution of approximately 8.5 μm. The process required positioning the porcine eye at the center of the field of the imaging system and rotating it around its central axis using a stepper motor. Reflection projection images were captured at each angle with an exposure time of 1.0 ms and an interval of 2°. The collected reflection-projection data were processed using a filtered reflection tomography algorithm, generating a series of two-dimensional slice data. These slices essentially represented cross-sectional views of the three-dimensional structural image, and were reconstructed into a complete three-dimensional structural image. Based on the reconstructed three-dimensional structural image of the porcine eye, the anterior chamber angles at different positions were measured, and a distribution map of these angles was drawn. Simultaneously, the ORT measurements were compared with the standard results obtained from optical coherence tomography (OCT) to assess the accuracy of ORT measurements. ResultsIn this study, we successfully obtained the reflection projection data of a porcine eye using ORT technology, reconstructed its three-dimensional structural image, and measured the anterior chamber angle, generating the corresponding distribution map. To better distinguish the different structural parts of porcine eye, the three-dimensional structural image was marked with blue, green, and yellow dashed lines from the outer to the inner layers. The area between the blue and green dashed lines corresponded to the sclera. The area between the green and yellow dashed lines corresponded to the iris. The area inside the yellow dashed line corresponded to the pupil. The three-dimensional structural image clearly revealed the key anatomical features of the porcine eye. It was able to measure the anterior chamber angle at different positions. Additionally, the anterior chamber angle measurements of the porcine eye using ORT were compared with the measurements obtained using a TEL320C1 type OCT system, showing an average deviation of 0.51° and a mean square error MSE of 0.317. ConclusionORT is a non-invasive, non-destructive, low-cost, and high-resolution imaging technique capable of achieving three-dimensional structural imaging and full-field anterior chamber angle measurement of a porcine eye. This technology offers a new perspective for the diagnosis of angle-closure glaucoma and is significant for the screening, diagnosis, and monitoring of eye diseases, potentially benefiting clinics and small hospitals in remote areas in the future.

Objective To propose a Q factor-based fatigue vibration evaluation method of the ultrasonic knife tip.Methods Firstly,an ultrasonic cutter fatigue testing table was established to realize repeated cutting,which was composed of a power supply module,a three-axis moving module,an ultrasonic cutter clamping module and a control module.Secondly,10 ultrasonic knives of some brand underwent fatigue testing with the table,during which non-contact measurement of the ultrasonic knife tip vibration was carried out and the Q factors were calculated at the five periods of the fatigue test,including the periods before cutting,after 500 times of cutting,after 1 000 times of cutting,after 2 000 times of cutting and after 3 000 times of cutting.Finally,the average cutting speed and burst pressure for coagulated vessels were computed at each period to validata the effectiveness of the method proposed.Results It's indicated that Q factor could effectively reflect the fatigue degradation of the ultrasonic knife tip,while the average cutting speed and burst pressure for coagulated vessels were difficult to efficiently evaluate the fatigue degradation level of the ultrasonic knife tip due to the uncertainty factors in the measurement process.Conclusion The proposed Q factor-based evaluation method can directly evaluate fatigue vibration of the ultrasonic knife tip in an accurate and quantitative manner.[Chinese Medical Equipment Journal,2024,45(6):17-22]

Objective To carry out accurate quantative evaluation of MRI scanning noise based on laser vibrometry technology.Methods Skull and spine MRI was performed with mute and conventional sequences.A laser vibrometry device was used to sample the surface vibration noise at the outer edge of the inspection hole of MRI system according to GB/T 16539-1996 Acoustics—Determination of sound power levels of noise sources using vibration velocity—Measurement for seal machinery,and the indicators of sound power level,sound pressure level and perceived noise level obtained by the three calculation methods(LPN1,LPN2 and LPN3)were analyzed with some dedicated MRI noise analysis software.Results The peak sound pressure levels for conventional and mute sequences of skull scanning were 81 and 63 dB(A),respectively,and mute sequence reduced the noise level significantly;the peak sound pressure levels for conventional and mute sequences of spine scanning were 79 and 75 dB(A),respectively,and the noise reduction level was significantly lower than that of skull scanning.Significant differences in noise reduction were not found in spine scanning sequences,while were found in skull scanning sequences.During spine and skull scanning LPN1,LPN2 and LPN3 obtained by the three calculation methods of conventional and mute sequences were all higher than the overall sound power and overall pressure levels obviously.Conclusion Mute sequence can not realize linear noise reduction for the whole frequency band,the perceived noise of the human ear during MRI scanning is related directly to the scanning sequence,and there may be some bias when only one physical indicator is involved in the noise evaluation of MRI system.[Chinese Medical Equipment Journal,2024,45(10):20-24]

Silver nanoparticles(AgNPs)is widely used in biomedicine,daily chemicals,food industry and other fields,and the possible negative health effects of its exposure have attracted widespread attention.Accurate analysis of AgNPs in biological matrices is the basis for biosafety studies of AgNPs.Among the existing analytical techniques,single particle-inductively coupled plasma-mass spectrometry(sp-ICP-MS)has significant advantages such as high sensitivity and simultaneous detection of different forms of silver.However,AgNPs in biological matrices is uniquely highly dynamic and low in content,and the matrix interference is severe,which increases the complexity of the analysis.Although some scholars have reviewed the application of this method for detection of metal nanoparticles in different scenarios,there is a lack of a summary of the quality control and optimization of the whole process from the perspective of AgNPs detection.There is still a lack of reference standards for the sp-ICP-MS analysis of AgNPs in biological matrices,and the existing methods need to be summarized and further optimized to achieve accurate quantification.Therefore,this paper reviewed the recent studies on the analysis of silver-containing nanoparticles in biological matrices based on sp-ICP-MS,mainly included the principles of the technique,the extraction methods of the particles,and the process of data processing,which focused on elaborating and comparing different pre-treatment methods,and explored issues of the current application of sp-ICP-MS for detection of AgNPs in biological tissues and the development of future optimization trends.The current problems of sp-ICP-MS for detection of AgNPs in biological tissues and the future development trend were also discussed.