1.Is non-contrast-enhanced magnetic resonance imaging cost-effective for screening of hepatocellular carcinoma?
Genevieve Jingwen TAN ; Chau Hung LEE ; Yan SUN ; Cher Heng TAN
Singapore medical journal 2024;65(1):23-29
INTRODUCTION:
Ultrasonography (US) is the current standard of care for imaging surveillance in patients at risk of hepatocellular carcinoma (HCC). Magnetic resonance imaging (MRI) has been explored as an alternative, given the higher sensitivity of MRI, although this comes at a higher cost. We performed a cost-effective analysis comparing US and dual-sequence non-contrast-enhanced MRI (NCEMRI) for HCC surveillance in the local setting.
METHODS:
Cost-effectiveness analysis of no surveillance, US surveillance and NCEMRI surveillance was performed using Markov modelling and microsimulation. At-risk patient cohort was simulated and followed up for 40 years to estimate the patients' disease status, direct medical costs and effectiveness. Quality-adjusted life years (QALYs) and incremental cost-effectiveness ratio were calculated.
RESULTS:
Exactly 482,000 patients with an average age of 40 years were simulated and followed up for 40 years. The average total costs and QALYs for the three scenarios - no surveillance, US surveillance and NCEMRI surveillance - were SGD 1,193/7.460 QALYs, SGD 8,099/11.195 QALYs and SGD 9,720/11.366 QALYs, respectively.
CONCLUSION
Despite NCEMRI having a superior diagnostic accuracy, it is a less cost-effective strategy than US for HCC surveillance in the general at-risk population. Future local cost-effectiveness analyses should include stratifying surveillance methods with a variety of imaging techniques (US, NCEMRI, contrast-enhanced MRI) based on patients' risk profiles.
Humans
;
Adult
;
Carcinoma, Hepatocellular/diagnostic imaging*
;
Liver Neoplasms/diagnostic imaging*
;
Cost-Effectiveness Analysis
;
Cost-Benefit Analysis
;
Quality-Adjusted Life Years
;
Magnetic Resonance Imaging/methods*
2.Response to “The Value of Non-Clinical Applications of Artificial Intelligence in Radiology Should Be Noted”
Nicole Kessa WEE ; Kim-Ann GIT ; Wen-Jeng LEE ; Gaurang RAVAL ; Aziz PATTOKHOV ; Evelyn Lai Ming HO ; Chamaree CHUAPETCHARASOPON ; Chuapetcharasopon TOMIYAMA ; Kwan Hoong NG ; Cher Heng TAN
Korean Journal of Radiology 2024;25(12):1102-1103
3.Preparation and Evaluation of Poloxamer/Carbopol In-Situ Gel Loaded with Quercetin: In-Vitro Drug Release and Cell Viability Study
Pinxuan ZHENG ; Xueying LIU ; Yanqing JIAO ; Xuran MAO ; Zhaorong ZONG ; Qi JIA ; Heng Bo JIANG ; Eui-Seok LEE ; Qi CHEN
Tissue Engineering and Regenerative Medicine 2024;21(8):1153-1171
BACKGROUND:
Periodontitis is a severe chronic inflammatory disease, whose traditional systemic antimicrobial therapy faces great limitations. In-situ gels provide an effective solution as an emerging local drug delivery system.
METHODS:
In this study, the novel thermosensitive poloxamer/carbopol in-situ gels loaded with 20 lmol/L quercetin for the treatment of periodontitis were prepared by cold method. Thirteen batches of in-situ gels based on two independent factors (X1 : poloxamer 407 and X2 : carbopol 934P) were designed and optimized by the statistical method of central composite design (CCD). The transparency, pH, injectability, viscosity, gelation temperature, gelation time, elasticity modulus, degradation rate and in-vitro drug release studies of the batches were evaluated, and the percentage of drug release in the first hour, the time required for 90% drug release, gelation temperature, and gelation time were selected as dependent variables.
RESULTS:
These two independent factors significantly affected the four dependent variables (p < 0.05). The optimization result displayed that the optimized concentration of poloxamer 407 was 20.84% (w/v), and carbopol 934P was 0.5% (w/v). The optimized formulation showed a clear appearance (++), acceptable injectability (Pass), viscosity(151,798 mPa s), gelation temperature (36 °C), gelation time (213 s), preferable cell viability and cell proliferation, conformed to first-order release kinetics, and had a significant antibacterial effect.
CONCLUSIONS
The article demonstrates the great potential of the quercetin in-situ gel as an effective treatment for periodontitis.
4.Response to “The Value of Non-Clinical Applications of Artificial Intelligence in Radiology Should Be Noted”
Nicole Kessa WEE ; Kim-Ann GIT ; Wen-Jeng LEE ; Gaurang RAVAL ; Aziz PATTOKHOV ; Evelyn Lai Ming HO ; Chamaree CHUAPETCHARASOPON ; Chuapetcharasopon TOMIYAMA ; Kwan Hoong NG ; Cher Heng TAN
Korean Journal of Radiology 2024;25(12):1102-1103
5.Preparation and Evaluation of Poloxamer/Carbopol In-Situ Gel Loaded with Quercetin: In-Vitro Drug Release and Cell Viability Study
Pinxuan ZHENG ; Xueying LIU ; Yanqing JIAO ; Xuran MAO ; Zhaorong ZONG ; Qi JIA ; Heng Bo JIANG ; Eui-Seok LEE ; Qi CHEN
Tissue Engineering and Regenerative Medicine 2024;21(8):1153-1171
BACKGROUND:
Periodontitis is a severe chronic inflammatory disease, whose traditional systemic antimicrobial therapy faces great limitations. In-situ gels provide an effective solution as an emerging local drug delivery system.
METHODS:
In this study, the novel thermosensitive poloxamer/carbopol in-situ gels loaded with 20 lmol/L quercetin for the treatment of periodontitis were prepared by cold method. Thirteen batches of in-situ gels based on two independent factors (X1 : poloxamer 407 and X2 : carbopol 934P) were designed and optimized by the statistical method of central composite design (CCD). The transparency, pH, injectability, viscosity, gelation temperature, gelation time, elasticity modulus, degradation rate and in-vitro drug release studies of the batches were evaluated, and the percentage of drug release in the first hour, the time required for 90% drug release, gelation temperature, and gelation time were selected as dependent variables.
RESULTS:
These two independent factors significantly affected the four dependent variables (p < 0.05). The optimization result displayed that the optimized concentration of poloxamer 407 was 20.84% (w/v), and carbopol 934P was 0.5% (w/v). The optimized formulation showed a clear appearance (++), acceptable injectability (Pass), viscosity(151,798 mPa s), gelation temperature (36 °C), gelation time (213 s), preferable cell viability and cell proliferation, conformed to first-order release kinetics, and had a significant antibacterial effect.
CONCLUSIONS
The article demonstrates the great potential of the quercetin in-situ gel as an effective treatment for periodontitis.
6.Response to “The Value of Non-Clinical Applications of Artificial Intelligence in Radiology Should Be Noted”
Nicole Kessa WEE ; Kim-Ann GIT ; Wen-Jeng LEE ; Gaurang RAVAL ; Aziz PATTOKHOV ; Evelyn Lai Ming HO ; Chamaree CHUAPETCHARASOPON ; Chuapetcharasopon TOMIYAMA ; Kwan Hoong NG ; Cher Heng TAN
Korean Journal of Radiology 2024;25(12):1102-1103
7.Preparation and Evaluation of Poloxamer/Carbopol In-Situ Gel Loaded with Quercetin: In-Vitro Drug Release and Cell Viability Study
Pinxuan ZHENG ; Xueying LIU ; Yanqing JIAO ; Xuran MAO ; Zhaorong ZONG ; Qi JIA ; Heng Bo JIANG ; Eui-Seok LEE ; Qi CHEN
Tissue Engineering and Regenerative Medicine 2024;21(8):1153-1171
BACKGROUND:
Periodontitis is a severe chronic inflammatory disease, whose traditional systemic antimicrobial therapy faces great limitations. In-situ gels provide an effective solution as an emerging local drug delivery system.
METHODS:
In this study, the novel thermosensitive poloxamer/carbopol in-situ gels loaded with 20 lmol/L quercetin for the treatment of periodontitis were prepared by cold method. Thirteen batches of in-situ gels based on two independent factors (X1 : poloxamer 407 and X2 : carbopol 934P) were designed and optimized by the statistical method of central composite design (CCD). The transparency, pH, injectability, viscosity, gelation temperature, gelation time, elasticity modulus, degradation rate and in-vitro drug release studies of the batches were evaluated, and the percentage of drug release in the first hour, the time required for 90% drug release, gelation temperature, and gelation time were selected as dependent variables.
RESULTS:
These two independent factors significantly affected the four dependent variables (p < 0.05). The optimization result displayed that the optimized concentration of poloxamer 407 was 20.84% (w/v), and carbopol 934P was 0.5% (w/v). The optimized formulation showed a clear appearance (++), acceptable injectability (Pass), viscosity(151,798 mPa s), gelation temperature (36 °C), gelation time (213 s), preferable cell viability and cell proliferation, conformed to first-order release kinetics, and had a significant antibacterial effect.
CONCLUSIONS
The article demonstrates the great potential of the quercetin in-situ gel as an effective treatment for periodontitis.
8.Response to “The Value of Non-Clinical Applications of Artificial Intelligence in Radiology Should Be Noted”
Nicole Kessa WEE ; Kim-Ann GIT ; Wen-Jeng LEE ; Gaurang RAVAL ; Aziz PATTOKHOV ; Evelyn Lai Ming HO ; Chamaree CHUAPETCHARASOPON ; Chuapetcharasopon TOMIYAMA ; Kwan Hoong NG ; Cher Heng TAN
Korean Journal of Radiology 2024;25(12):1102-1103
9.Preparation and Evaluation of Poloxamer/Carbopol In-Situ Gel Loaded with Quercetin: In-Vitro Drug Release and Cell Viability Study
Pinxuan ZHENG ; Xueying LIU ; Yanqing JIAO ; Xuran MAO ; Zhaorong ZONG ; Qi JIA ; Heng Bo JIANG ; Eui-Seok LEE ; Qi CHEN
Tissue Engineering and Regenerative Medicine 2024;21(8):1153-1171
BACKGROUND:
Periodontitis is a severe chronic inflammatory disease, whose traditional systemic antimicrobial therapy faces great limitations. In-situ gels provide an effective solution as an emerging local drug delivery system.
METHODS:
In this study, the novel thermosensitive poloxamer/carbopol in-situ gels loaded with 20 lmol/L quercetin for the treatment of periodontitis were prepared by cold method. Thirteen batches of in-situ gels based on two independent factors (X1 : poloxamer 407 and X2 : carbopol 934P) were designed and optimized by the statistical method of central composite design (CCD). The transparency, pH, injectability, viscosity, gelation temperature, gelation time, elasticity modulus, degradation rate and in-vitro drug release studies of the batches were evaluated, and the percentage of drug release in the first hour, the time required for 90% drug release, gelation temperature, and gelation time were selected as dependent variables.
RESULTS:
These two independent factors significantly affected the four dependent variables (p < 0.05). The optimization result displayed that the optimized concentration of poloxamer 407 was 20.84% (w/v), and carbopol 934P was 0.5% (w/v). The optimized formulation showed a clear appearance (++), acceptable injectability (Pass), viscosity(151,798 mPa s), gelation temperature (36 °C), gelation time (213 s), preferable cell viability and cell proliferation, conformed to first-order release kinetics, and had a significant antibacterial effect.
CONCLUSIONS
The article demonstrates the great potential of the quercetin in-situ gel as an effective treatment for periodontitis.
10.Response to “The Value of Non-Clinical Applications of Artificial Intelligence in Radiology Should Be Noted”
Nicole Kessa WEE ; Kim-Ann GIT ; Wen-Jeng LEE ; Gaurang RAVAL ; Aziz PATTOKHOV ; Evelyn Lai Ming HO ; Chamaree CHUAPETCHARASOPON ; Chuapetcharasopon TOMIYAMA ; Kwan Hoong NG ; Cher Heng TAN
Korean Journal of Radiology 2024;25(12):1102-1103

Result Analysis
Print
Save
E-mail