Objective: This study aimed to compare the accuracy of Qlone, Magiscan, and 3dMD with that of direct anthropometry (DA). Methods: The study involved 41 patients. Sixteen facial landmarks, including six individual and five paired points, were marked on each participant’s face. Subsequently, 18 linear measurements were assessed using a 3dMD device (multicamera photogrammetry), Qlone, Magiscan smartphone applications (single-camera photogrammetry), and DA.The Qlone and Magiscan images were calibrated using a reference point 10 mm from the nasion during DA to ensure a 1:1 correspondence. Results: Concerning the precision of the digital methods compared to DA, the mean intraclass correlation coefficient values of 3dMD, Qlone and Magiscan were 0.989, 0.980 and 0.982, respectively. Compared with DA, 3dMD achieved excellent trueness with the lowest average absolute differences in the measurements (highest value = 0.95 ± 0.62 mm). The highest values for Qlone and Magiscan were 1.51 ± 1.11 mm and 2.14 ± 1.69 mm, respectively. According to the number of parameters, the ranking of unreliable values (> 2 mm) was Magiscan (n = 46), Qlone (n = 35), and then, 3dMD (n = 4). Furthermore, reliability (less than 1 mm) was the highest for 3dMD (n = 517), followed by Magiscan (n = 457), and then, Qlone (n = 415). Conclusions The 3dMD achieved excellent trueness with the lowest average absolute differences in the measurements. Based on statistical analysis, the trueness values of Magiscan and Qlone were close to that of 3dMD. To apply these smartphone applications clinically, more studies are necessary.

Objective: This study aimed to compare the accuracy of Qlone, Magiscan, and 3dMD with that of direct anthropometry (DA). Methods: The study involved 41 patients. Sixteen facial landmarks, including six individual and five paired points, were marked on each participant’s face. Subsequently, 18 linear measurements were assessed using a 3dMD device (multicamera photogrammetry), Qlone, Magiscan smartphone applications (single-camera photogrammetry), and DA.The Qlone and Magiscan images were calibrated using a reference point 10 mm from the nasion during DA to ensure a 1:1 correspondence. Results: Concerning the precision of the digital methods compared to DA, the mean intraclass correlation coefficient values of 3dMD, Qlone and Magiscan were 0.989, 0.980 and 0.982, respectively. Compared with DA, 3dMD achieved excellent trueness with the lowest average absolute differences in the measurements (highest value = 0.95 ± 0.62 mm). The highest values for Qlone and Magiscan were 1.51 ± 1.11 mm and 2.14 ± 1.69 mm, respectively. According to the number of parameters, the ranking of unreliable values (> 2 mm) was Magiscan (n = 46), Qlone (n = 35), and then, 3dMD (n = 4). Furthermore, reliability (less than 1 mm) was the highest for 3dMD (n = 517), followed by Magiscan (n = 457), and then, Qlone (n = 415). Conclusions The 3dMD achieved excellent trueness with the lowest average absolute differences in the measurements. Based on statistical analysis, the trueness values of Magiscan and Qlone were close to that of 3dMD. To apply these smartphone applications clinically, more studies are necessary.

Objective: This study aimed to compare the accuracy of Qlone, Magiscan, and 3dMD with that of direct anthropometry (DA). Methods: The study involved 41 patients. Sixteen facial landmarks, including six individual and five paired points, were marked on each participant’s face. Subsequently, 18 linear measurements were assessed using a 3dMD device (multicamera photogrammetry), Qlone, Magiscan smartphone applications (single-camera photogrammetry), and DA.The Qlone and Magiscan images were calibrated using a reference point 10 mm from the nasion during DA to ensure a 1:1 correspondence. Results: Concerning the precision of the digital methods compared to DA, the mean intraclass correlation coefficient values of 3dMD, Qlone and Magiscan were 0.989, 0.980 and 0.982, respectively. Compared with DA, 3dMD achieved excellent trueness with the lowest average absolute differences in the measurements (highest value = 0.95 ± 0.62 mm). The highest values for Qlone and Magiscan were 1.51 ± 1.11 mm and 2.14 ± 1.69 mm, respectively. According to the number of parameters, the ranking of unreliable values (> 2 mm) was Magiscan (n = 46), Qlone (n = 35), and then, 3dMD (n = 4). Furthermore, reliability (less than 1 mm) was the highest for 3dMD (n = 517), followed by Magiscan (n = 457), and then, Qlone (n = 415). Conclusions The 3dMD achieved excellent trueness with the lowest average absolute differences in the measurements. Based on statistical analysis, the trueness values of Magiscan and Qlone were close to that of 3dMD. To apply these smartphone applications clinically, more studies are necessary.

Objective: This study aimed to compare the accuracy of Qlone, Magiscan, and 3dMD with that of direct anthropometry (DA). Methods: The study involved 41 patients. Sixteen facial landmarks, including six individual and five paired points, were marked on each participant’s face. Subsequently, 18 linear measurements were assessed using a 3dMD device (multicamera photogrammetry), Qlone, Magiscan smartphone applications (single-camera photogrammetry), and DA.The Qlone and Magiscan images were calibrated using a reference point 10 mm from the nasion during DA to ensure a 1:1 correspondence. Results: Concerning the precision of the digital methods compared to DA, the mean intraclass correlation coefficient values of 3dMD, Qlone and Magiscan were 0.989, 0.980 and 0.982, respectively. Compared with DA, 3dMD achieved excellent trueness with the lowest average absolute differences in the measurements (highest value = 0.95 ± 0.62 mm). The highest values for Qlone and Magiscan were 1.51 ± 1.11 mm and 2.14 ± 1.69 mm, respectively. According to the number of parameters, the ranking of unreliable values (> 2 mm) was Magiscan (n = 46), Qlone (n = 35), and then, 3dMD (n = 4). Furthermore, reliability (less than 1 mm) was the highest for 3dMD (n = 517), followed by Magiscan (n = 457), and then, Qlone (n = 415). Conclusions The 3dMD achieved excellent trueness with the lowest average absolute differences in the measurements. Based on statistical analysis, the trueness values of Magiscan and Qlone were close to that of 3dMD. To apply these smartphone applications clinically, more studies are necessary.

Objective: This study aimed to compare the accuracy of Qlone, Magiscan, and 3dMD with that of direct anthropometry (DA). Methods: The study involved 41 patients. Sixteen facial landmarks, including six individual and five paired points, were marked on each participant’s face. Subsequently, 18 linear measurements were assessed using a 3dMD device (multicamera photogrammetry), Qlone, Magiscan smartphone applications (single-camera photogrammetry), and DA.The Qlone and Magiscan images were calibrated using a reference point 10 mm from the nasion during DA to ensure a 1:1 correspondence. Results: Concerning the precision of the digital methods compared to DA, the mean intraclass correlation coefficient values of 3dMD, Qlone and Magiscan were 0.989, 0.980 and 0.982, respectively. Compared with DA, 3dMD achieved excellent trueness with the lowest average absolute differences in the measurements (highest value = 0.95 ± 0.62 mm). The highest values for Qlone and Magiscan were 1.51 ± 1.11 mm and 2.14 ± 1.69 mm, respectively. According to the number of parameters, the ranking of unreliable values (> 2 mm) was Magiscan (n = 46), Qlone (n = 35), and then, 3dMD (n = 4). Furthermore, reliability (less than 1 mm) was the highest for 3dMD (n = 517), followed by Magiscan (n = 457), and then, Qlone (n = 415). Conclusions The 3dMD achieved excellent trueness with the lowest average absolute differences in the measurements. Based on statistical analysis, the trueness values of Magiscan and Qlone were close to that of 3dMD. To apply these smartphone applications clinically, more studies are necessary.

Objective: Surgically assisted maxillary protraction is an alternative protocol in severe Class III cases or after the adolescent growth spurt involving increased maxillary advancement. Correction of the maxillary deficiency has been suggested to improve pharyngeal airway dimensions. Therefore, this retrospective study aimed to analyze the airway changes cephalometrically following surgically assisted maxillary protraction with skeletal anchorage and Class III elastics. Methods: The study population consisted of 15 Class III patients treated with surgically assisted maxillary protraction combined with skeletal anchorage and Class III elastics (mean age: 12.9 ± 1.2 years). Growth changes were initially assessed for a mean of 5.5 ± 1.6 months prior to treatment. Airway and skeletal changes in the control (T0), pre-protraction (T1), post-protraction (T2), and follow-up (T3) periods were monitored and compared using lateral cephalometric radiographs. Statistical significance was set at p < 0.05. Results: The skeletal or airway parameters showed no statistically significant changes during the control period. Sella to nasion angle, N perpendicular to A, Point A to Point B angle, and Frankfort plane to mandibular plane angle increased significantly during the maxillary protraction period (p < 0.05), but no significant changes were observed in airway parameters (p > 0.05). No statistically significant changes were observed in the airway parameters in the follow-up period either. However, Sella to Gonion distance increased significantly (p < 0.05) during the follow-up period. Conclusions No significant changes in pharyngeal airway parameters were found during the control, maxillary protraction, and follow-up periods. Moreover, the significant increases in the skeletal parameters during maxillary protraction were maintained in the long-term.

OBJECTIVE: The aim of this retrospective study was to evaluate and compare the changes in the pharyngeal airway (PA), maxillary sinus volume, and skeletal parameters after rapid maxillary expansion (RME) and alternate rapid maxillary expansion and constriction (Alt-RAMEC) followed by facemask (FM) therapy. METHODS: The records of 40 patients with skeletal Class III malocclusion due to maxillary retrognathism were collected, and the patients were assigned into two groups. The first group comprised 8 male and 12 female patients (mean age, 10.0 ± 1.1 years) treated using RME/FM for an average of 10 months. The second group comprised 10 male and 10 female patients (mean age, 9.64 ± 1.3 years) treated using Alt-RAMEC/FM for an average of 12 months. Cone-beam computed tomography images acquired before (T0) and after treatment (T1) were evaluated. RESULTS: Regarding the skeletal effects, significant differences between the groups were the increase in ANS-HRP (perpendicular distance of ANS to the horizontal reference plane, 0.99 mm, p <0.05) in the Alt-RAMEC/FM group and the decrease in PP-SN (palatal plane to Sella-Nasion plane, 0.93°, p < 0.05) in the RME/FM group. Maxillary sinus volumes increased significantly in both the groups, and the increase was statistically significantly higher in the Alt-RAMEC/FM group. Although no significant intergroup differences were observed in PA volumes, both lower (1,011.19 mm3) and total (1,601.21 mm3), PA volume increased significantly in the Alt-RAMEC/FM group. CONCLUSIONS: The different expansion devices and protocols used with FM therapy do not seem to affect the forward movement of the maxilla and PA volumes. In contrast, the increase in maxillary sinus volume was greater in the Alt-RAMEC/FM protocol.
Cone-Beam Computed Tomography ; Constriction* ; Female ; Humans ; Male ; Malocclusion ; Maxilla ; Maxillary Sinus ; Palatal Expansion Technique* ; Retrognathia ; Retrospective Studies