AIM: To observe the changes of corneal densitometry(CD)and higher-order aberrations after small incision lenticule extraction(SMILE), and to explore their correlations and influencing factors.METHODS: Prospective study. A total of 62 high-degree myopia and compound myopic astigmatism patients(62 eyes)who underwent SMILE in Urumqi Aier Eye Hospital from December 2022 to November 2023 were collected. The CD, root mean square of corneal higher-order aberrations(RMS HOA), spherical aberration, vertical coma, horizontal coma, and corneal epithelial thickness(CET)of the patients were measured before surgery, and at 1 d, 1 wk, 1, 3, and 6 mo after surgery, respectively.RESULTS:There were 4 patients lost to follow-up during the period, all due to failure to attend scheduled reexaminations. The number of complete and valid cases was 58 eyes. The CD in the central and paracentral regions of the anterior, middle, and total layer of the cornea increased significantly on the first day after surgery(all P<0.003). At 6 mo after surgery, there was a slight but statistically significant decrease in the CD of the central and paracentral regions of the anterior and the total anterior layer(all P<0.003). Compared with the preoperative baseline values, the RMS HOA, spherical aberration, and vertical coma significantly increased at 6 mo after surgery(all P<0.003), while the change in horizontal coma was not statistically significant. Compared with the preoperative baseline values, the CET in the central, paracentral, and peripheral regions of the cornea, as well as the total average CET in the 0-7 mm range of the cornea increased at 6 mo after surgery(all P<0.003). At 1 d after surgery, CD of the anterior layer and total layer in the central region of the cornea were positively correlated with the CET in the central region(rs=0.327, rs=0.250, all P<0.05). At 6 mo after the surgery, the CD of the middle layer and posterior layer in the central corneal region were negatively correlated with the preoperative spherical equivalent and the change of RMS HOA(all P<0.05).CONCLUSION:The anterior CD decreases at 6 mo after SMILE for high myopia correction, and there is a certain correlation between the changes in CD and some clinical parameters.

Hand osteoarthritis(HOA)is a disease of hand joint disorders,mainly manifested by hand interphalangeal joint and thumb carpal metacarpal joint pain,swelling,morning stiffness,limited movement,and even deformity,belonging to the category of TCM"bone arthralgia".The authors believe that HOA is more common with Taiyang Shaoyang disease,suitable for simultaneous treatment for Taiyang and Shaoyang,to operate the cardinal,regulate qi,blood,nutritive and defensive levels,dispel wind and cold,remove dampness and arthralgia,using modified Chaihu Guizhi Decoction,with confirmed efficacy.

Lumbar disc herniation is mainly manifested as lower back pain,numbness,weakness,and radiating pain in the lower limbs,which seriously affects the patients'work and quality of life.In clinical practice,it has been found that this disease always belongs to the category of deficiency in healthy qi and excess in pathogenic factors,often accompanied by kidney deficiency and cold dampness.Kidney deficiency is the root cause,while cold dampness is the symptoms.The two factors interact with each other and cause back pain.The treatment is based on dispersing cold and dampness,tonifying the kidneys and strengthening the waist,and the classic ancient formula Shenzhuo Powder is safe and effective.

Immunodeficient animal models play an important role in preclinical research and are important experimental tools in modern biomedical research that are widely used in immunology,genetics,oncology,microbiology,and other research fields.Gene editing is a technology for targeted modification of biological genomes.From emergence to application,it has greatly promoted the development of biomedical research.Gene editing technology mainly includes homing endonucleases,zinc finger nucleases,transcription activator-like effector nucleases,and the CRISPR/Cas9 system.Researchers have used these technologies to establish various types of immunodeficient animal models,each with advantages and limitations.In recent years,a large number of studies have confirmed that the human immunodeficient animal model accurately simulates the functions of cancer cells,drugs,and the human immune system,better simulates human diseases,and is widely used to study human immunobiology and the potential mechanisms of complex diseases.In this article,we review the progress in the research and application of gene editing technology to the establishment of immunodeficient animal models,discuss in depth the problems and optimization strategies of gene editing technology in the preparation of immunodeficient animal models,and present its future development prospects to provide references for researchers to select and establish immunodeficient animal models.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective:To investigate the early clinical characteristics of elderly patients with severe burns and the risk factors on prognosis.Methods:This study was a retrospective case series study. Clinical data of 124 elderly patients with severe burns who met the inclusion criteria and were admitted to the 12 hospitals from January 2015 to December 2020 were collected, including 4 patients from the Fourth People's Hospital of Dalian, 5 patients from Fujian Medical University Union Hospital, 22 patients from Guangzhou Red Cross Hospital of Jinan University, 5 patients from Heilongjiang Provincial Hospital, 27 patients from the First Affiliated Hospital of Naval Medical University, 9 patients from the First Affiliated Hospital of Nanchang University, 10 patients from Affiliated Hospital of Nantong University, 9 patients from Tongren Hospital of Wuhan University & Wuhan Third Hospital, 12 patients from the 924 th Hospital of PLA, 6 patients from Zhangjiagang First People's Hospital, 4 patients from Taizhou Hospital of Zhejiang Province, and 11 patients from Zhengzhou First People's Hospital. The patients' overall clinical characteristics, such as gender, age, body mass index, total burn area, full-thickness burn area, inhalation injury, causative factors, whether combined with underlying medical diseases, and admission time after injury were recorded. According to the survival outcome within 28 days after injury, the patients were divided into survival group (89 cases) and death group (35 cases). The following data of patients were compared between the two groups, including the basic data and injuries (the same as the overall clinical characteristics ahead); the coagulation indexes within the first 24 hours of injury such as prothrombin time (PT), activated partial thromboplastin time (APTT), thrombin time, D-dimer, fibrinogen degradation product (FDP), international normalized ratio (INR), and fibrinogen; the blood routine indexes within the first 24 hours of injury such as white blood cell count, platelet count, neutrophil-to-lymphocyte ratio, monocyte count, red blood cell count, hemoglobin, and hematocrit; the organ function indexes within the first 24 hours of injury such as direct bilirubin, total bilirubin, urea, serum creatinine, aspartate aminotransferase, alanine aminotransferase, total protein, albumin, globulin, blood glucose, triglyceride, total cholesterol, alkaline phosphatase, creatine kinase, electrolyte indexes (potassium, sodium, chlorine, calcium, magnesium, and phosphorus in blood), uric acid, myoglobin, and brain natriuretic peptide; the infection and blood gas indexes within the first 24 hours of injury such as procalcitonin, C-reactive protein, pH value, oxygenation index, base excess, and lactate; treatment such as whether conducted with mechanical ventilation, whether conducted with continuous renal replacement therapy, whether conducted with anticoagulation therapy, whether applied with vasoactive drugs, and fluid resuscitation. The analysis was conducted to screen the independent risk factors for the mortality within 28 days after injury in elderly patients with severe burns. Results:Among 124 patients, there were 82 males and 42 females, aged 60-97 years, with body mass index of 23.44 (21.09, 25.95) kg/m 2, total burn area of 54.00% (42.00%, 75.00%) total body surface area (TBSA), and full-thickness burn area of 25.00% (10.00%, 40.00%) TBSA. The patients were mainly combined with moderate to severe inhalation injury and caused by flame burns. There were 43 cases with underlying medical diseases. The majority of patients were admitted to the hospital within 8 hours after injury. There were statistically significant differences between patients in the 2 groups in terms of age, total burn area, full-thickness burn area, and inhalation injury, and PT, APTT, D-dimer, FDP, INR, white blood cell count, platelet count, urea, serum creatinine, blood glucose, blood sodium, uric acid, myoglobin, and urine volume within the first 24 hours of injury (with Z values of 2.37, 5.49, 5.26, 5.97, 2.18, 1.95, 2.68, 2.68, 2.51, 2.82, 2.14, 3.40, 5.31, 3.41, 2.35, 3.81, 2.16, and -3.82, respectively, P<0.05); there were statistically significant differences between two groups of patients in whether conducted with mechanical ventilation and whether applied with vasoactive drugs (with χ2 values of 9.44 and 28.50, respectively, P<0.05). Age, total burn area, full-thickness burn area, serum creatinine within the first 24 hours of injury, and APTT within the first 24 hours of injury were the independent risk factors for the mortality within 28 days after injury in elderly patients with severe burns (with odds ratios of 1.17, 1.10, 1.10, 1.09, and 1.27, 95% confidence intervals of 1.03-1.40, 1.04-1.21, 1.05-1.19, 1.05-1.17, and 1.07-1.69, respectively, P<0.05). Conclusions:The elderly patients with severe burns had the injuries mainly from flame burns, often accompanied by moderate to severe inhalation injury and enhanced inflammatory response, elevated blood glucose levels, activated fibrinolysis, and impaired organ function in the early stage, which are associated with their prognosis. Age, total burn area, full-thickness burn area, and serum creatinine and APTT within the first 24 hours of injury are the independent risk factors for death within 28 days after injury in this population.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective:To evaluate the clinical significance of neoadjuvant immunotherapy combined with chemotherapy in the treatment of larynx preservation in locally advanced hypopharyngeal squamous cell carcinoma. Methods:Patients with locally advanced HPSCC（cT3-T4aN0-N3M0） were eligible. All received 2 cycles of pembrolizumab combined with docetaxel and platinum neoadjuvant induction therapy. After two cycles, the efficacy was evaluated, followed by radical chemoradiotherapy or surgery and adjuvant chemoradiotherapy according to the efficacy. The primary endpoints were objective response rate（ORR） ，larynx-preservation（LP） rate at 3 months post-treatment and the adverse reactions during neoadjuvant therapy. Results:From December 2021 to December 2022, 10 patients with locally advanced HPSCC（cT3-T4aN0-N3M0） were enrolled. After 2 cycles of the neoadjuvant therapy, 2 patients achieved complete response（CR）, 7 patients achieved partial response（PR）, 1 patient was stable disease（SD）, objective response rate（ORR） was 90%, and disease control rate（DCR） was 100%. 5 patients received radical chemoradiotherapy, 5 patients received surgery and adjuvant chemoradiotherapy, four of them received partial laryngectomy and partial hypopharyngeal resection surgery, and one of them received total laryngectomy and partial hypopharyngeal resection surgery. All patients were able to withstand adverse reactions of neoadjuvant therapy and successfully completed the whole treatment of HPSCC without grade 3-4 treatment-related adverse reactions. There was no recurrence or metastasis during 3-18 months of follow-up. 1 patient died of severe pneumonia 3 months after the completion of radical chemoradiotherapy. At 3 months after treatment, the larynx-preservation rate was 80%. Conclusion:Neoadjuvant immunotherapy combined with chemotherapy has good short-term efficacy and the adverse reactions were tolerable. It can improve the larynx-preservation rate of patients with locally advanced HPSCC, thus improving the prognosis and quality of life of patients.
Humans ; Squamous Cell Carcinoma of Head and Neck/etiology* ; Neoadjuvant Therapy ; Quality of Life ; Cisplatin ; Treatment Outcome ; Antineoplastic Combined Chemotherapy Protocols/therapeutic use* ; Larynx ; Head and Neck Neoplasms ; Immunotherapy

Objective:To investigate the prognostic impact of different tumor invasion patterns in the surgical treatment of T3 glottic laryngeal cancer. Methods:A retrospective analysis was conducted on the clinical data of 91 patients with T3 glottic laryngeal cancer. Results:Among the 91 patients, 58 cases （63.7%） had anterior invasion and 33 cases （36.3%） had posterior invasion. The posterior invasion was significantly correlated with invasions of the dorsal plate of cricoid cartilage （P<0.001）, arytenoid cartilage （P= 0.001）, and subglottic region（P = 0.001）. There was no statistical difference in survival outcomes between the total laryngectomy group and the partial laryngectomy group. But in the partial laryngectomy group, the 5-year disease-free survival（DFS） of patients with anterior invasive tumors was better than that of patients with posterior invasion tumors （HR: 4.681, 95%CI 1.337-16.393, P=0.016）, and subglottic invasion was associated with worse loco-regional recurrence-free survival（LRRFS）（HR: 3.931, 95%CI 1.054-14.658, P=0.041）. At the same time, we found that involvement of the dorsal plate of cricoid cartilage was an independent risk factor for postoperative laryngeal stenosis in partial laryngectomy patients （HR:11.67, 95%CI 1.89-71.98,P=0.008）. Conclusion:Compared with total laryngectomy, selected partial laryngectomy can also achieve favorable oncological outcomes. Posterior invasion and subglottic extension are independent prognostic factors for recurrence of partial laryngectomy in T3 glottic laryngeal cancer, and the involvement of the dorsal plate of cricoid cartilage is associated with postoperative laryngeal stenosis. The tumor invasion pattern of laryngeal cancer should be further subdivided in order to select a more individualized treatment plan.
Humans ; Prognosis ; Laryngeal Neoplasms/pathology* ; Retrospective Studies ; Laryngostenosis/surgery* ; Carcinoma, Squamous Cell/pathology* ; Postoperative Complications/surgery* ; Laryngectomy

Objective:To investigate the diversity and clinical effect of supraclavicular island flap in repairing the defect after head and neck tumor surgery. Methods:A retrospective analysis was performed on 30 patients who received the repair of head and neck defects with supraclavicular island flaps at Department of Otorhinolaryngology Head and Neck Surgery of the First Affiliated Hospital of Chongqing Medical University from January 2017 to March 2023. The sites and types of defects, intraoperative blood loss, time of flaps preparation, areas of flaps, survival of the flaps and other complications were recorded. Results:A total of 30 patients were enrolled, including 26 males and 4 females, aged 36-82 years. Among them, 22 patients with hypopharyngeal partial defect were repaired （19 patients with ipsilateral defect and 3 patients with contralateral defect）. In addition, 2 patients were repaired with contralateral pectoralis major musculocutaneous flap around the hypopharynx, the neck skin defect was repaired in 2 patients, the parotid skin defect was repaired in 2 patients, the temporal bone skin defect was repaired in 1 patient, and the cervical esophageal defect was repaired in 1 patient. The average blood loss during the operation was 8 ml, and the average time was 32 min. The flap areas ranged from 5.0 cm×4.0 cm to 20.0 cm×8.0 cm. 27 of 30 flaps survived（90.0%）, and pharyngeal fistula occurred in 6 patients after operation（4 flaps survived after local dressing）. One patient was complicated with venous thrombosis（the flap necrosis after local dressing）. Shoulder and neck functions（lift, internal rotation and abduction） were not significantly affected in 29 patients, and the function of 1 patient with shoulder infection was not affected after treatment. Conclusion:Supraclavicular island flap is a highly vascularized axial fascial flap. It is easy to make, thin, and soft in texture, and can be used to repair different sites and types of postoperative head and neck tumor defects with a low donor site complication rate. Good results in post-operative repair of head and neck tumors are worth promoting.
Male ; Female ; Humans ; Plastic Surgery Procedures ; Retrospective Studies ; Skin Transplantation ; Soft Tissue Injuries/surgery* ; Treatment Outcome ; Surgical Flaps ; Head and Neck Neoplasms/surgery*