A 65-year-old male presented with chest pain that occurred after alcohol drinking at the early morning hours and relieved after taking sublingual nitroglycerin. Coronary angiography revealed a malformed left main coronary artery (LMCA) originating from the right sinus of Valsalva with 10%–20% stenosis and 80% vasospasm. Coronary artery spasm (CAS) in the LMCA is extremely rare but can present with catastrophic features. CAS is more frequently observed in atherosclerotic segments of coronary arteries, and multidetector computed tomography is preferred for assessing the degree of atherosclerosis in cases of LMCA spasm. Anomalous origin of coronary arteries (AOCA) is also rare but can lead to severe symptoms. Although surgical intervention is generally recommended for symptomatic patients, while management of asymptomatic cases remains a topic of ongoing research and debated. In this case, there was concern that the patient’s symptoms might be attributable to AOCA or CAS, medical management was selected over surgical intervention, given the presentation consistent with typical angina due to spasm.

Intracranial growing teratoma syndrome (iGTS) is a rare phenomenon in patients with non-germinomatous germ cell tumor (NGGCT) after chemotherapy or radiotherapy. It manifests as paradoxical growth of teratomatous components, with multiple cystic lesions on cranial imaging despite normalized tumor markers. This paper presents a 22-year-old male with iGTS, diagnosed one month after chemotherapy against NGGCT. Initially diagnosed with presumptive pineal NGGCT causing obstructive hydrocephalus, the patient underwent endoscopic third ventriculostomy and extraventricular drainage with tumor biopsy followed by two chemotherapy cycles. Despite normalization of tumor markers, follow-up MRI showed increased tumor size with honeycomb-like cystic patterns. The patient underwent suboccipital craniotomy for tumor removal via combined telovelar and infratentorial supracerebellar approaches.The final pathology confirmed mature teratoma. However, postoperative bleeding and left thalamic infarction occurred, resulting in severe neurological deficits. Despite challenges, the patient eventually regained the ability to follow simple commands. To understand iGTS pathophysiology, several hypotheses, including the differentiation of immature components and the uninhibited growth of mature components induced by chemotherapy or radiotherapy, were explored. Surgical intervention remains as an ideal treatment, while clinical trials investigate chemotherapy options. Frequent imaging followups are crucial for early detection in iGTS for NGGCT patients.

Background: and Objective: We aimed to investigate long-term clinical and echocardiographic outcomes, including tricuspid valve durability, annular growth, and left ventricular reverse remodeling, after modified cone reconstruction in patients with Ebstein’s anomaly. Methods: This was a retrospective analysis of all pediatric patients who underwent modified cone reconstruction for Ebstein’s anomaly at a single tertiary center between January 2005 and June 2021. Results: A total of 14 pediatric patients underwent modified cone reconstruction for Ebstein’s anomaly; the median age was 5.8 years (range, 0.01–16.6). There were three patients (21.4%) with Carpentier type B, ten patients with Carpentier type C (71.4%), and one patient with Carpentier type D (7.1%). There was no early or late mortality, arrhythmia, or readmission for heart failure at a 10-year follow-up. There were no cases of more than mild tricuspid stenosis or more than moderate tricuspid regurgitation during the study period, except for one patient with severe tricuspid regurgitation who underwent reoperation. The z value for tricuspid valve annular size significantly decreased immediately after the operation (2.46 vs. −1.15, p<0.001).However, from 1 year to 7 years after surgery, the z values were maintained between −1 and +1.Left ventricular end-systolic volume, end-diastolic volume, and stroke volume increased after surgery and remained elevated until seven years postoperatively. Conclusions Ebstein’s anomaly in children can be repaired by modified cone reconstruction with low mortality and morbidity, good tricuspid valve durability, and annular growth relative to somatic growth.

Tegoprazan is a novel potassium-competitive acid blocker that treats gastric acid-related diseases. Clarithromycin was widely used as one of various regimens for eradicating Helicobacter pylori. This study compared the pharmacokinetic and safety profile of tegoprazan and clarithromycin between combination therapy and monotherapy to evaluate the potential drug-drug interaction. An open-label, randomized, 6-sequence, 3-period crossover study was conducted in 24 healthy subjects. According to the assigned sequence, the subject was administered the assigned treatment during 5 days in each period. PK parameters of tegoprazan and clarithromycin administered in combination were compared with those of the respective monotherapies. The co-administration of tegoprazan with clarithromycin increased maximum steady-state plasma concentration (C ss,max ) and area under the plasma concentration-time curve in dosing interval at steady-state (AUC ss,tau ) of tegoprazan (1.6-fold in C ss,max and 2.5-fold in AUC ss,tau ) and M1 (2.0-fold in C ss,max , 2.5-fold in AUC ss,tau ) than tegoprazan alone. The C ss,max and AUC sss,tau of 14-hydroxyclarithromycin increased 1.8- and 2.0-fold in co-administration, respectively. The AUC ss.tau of clarithromycin was slightly increased in co-administration, but C ss,max was not changed. Combination of tegoprazan and clarithromycin and those of the respective monotherapies were tolerated in 24 healthy subjects. There may exist drug interaction that lead to reciprocal increase in plasma drug concentrations when tegoprazan and clarithromycin were administrated in combination and no safety concerns were raised. It is suggested that an in-depth analysis of the concentrationresponse relationship is necessary to determine whether these concentration changes warrant clinical action.

Background: Although poor oral health is a common comorbidity in individuals with airflow limitation (AFL), few studies have comprehensively evaluated this association. Furthermore, the association between oral health and the severity of AFL has not been well elucidated. Methods: Using a population-based nationwide survey, we classified individuals according to the presence or absence of AFL defined as pre-bronchodilator forced expiratory volume in 1 second/forced vital capacity < 0.7. Using multivariable logistic regression analyses, we evaluated the association between AFL severity and the number of remaining teeth; the presence of periodontitis; the Decayed, Missing, and Filled Teeth (DMFT) index; and denture wearing. Results: Among the 31,839 participants, 14% had AFL. Compared with the control group, the AFL group had a higher proportion of periodontitis (88.8% vs. 79.4%), complete denture (6.2% vs. 1.6%), and high DMFT index (37.3% vs. 27.8%) (P < 0.001 for all). In multivariable analyses, denture status: removable partial denture (adjusted odds ratio [aOR], 1.12; 95% confidence interval [95% CI], 1.04–1.20) and complete denture (aOR, 1.52; 95% CI, 1.01– 2.05), high DMFT index (aOR, 1.13; 95% CI, 1.02–1.24), and fewer permanent teeth (0–19;aOR, 1.32; 95% CI, 1.12–1.52) were significantly associated with AFL. Furthermore, those with severe to very severe AFL had a significantly higher proportion of complete denture (aOR, 2.41; 95% CI, 1.11–3.71) and fewer remaining teeth (0–19; aOR, 2.29; 95% CI, 1.57–3.01). Conclusion Denture wearing, high DMFT index, and fewer permanent teeth are significantly associated with AFL. Furthermore, a reduced number of permanent teeth (0–19) was significantly related to the severity of AFL. Therefore, physicians should pay attention to oral health in managing patients with AFL, such as chronic obstructive pulmonary disease.

Objective: To evaluate the impact of surgical simulation training using a three-dimensional (3D)-printed model of tetralogy of Fallot (TOF) on surgical skill development. Materials and Methods: A life-size congenital heart disease model was printed using a Stratasys Object500 Connex2 printer from preoperative electrocardiography-gated CT scans of a 6-month-old patient with TOF with complex pulmonary stenosis.Eleven cardiothoracic surgeons independently evaluated the suitability of four 3D-printed models using composite Tango 27, 40, 50, and 60 in terms of palpation, resistance, extensibility, gap, cut-through ability, and reusability of. Among these, Tango 27 was selected as the final model. Six attendees (two junior cardiothoracic surgery residents, two senior residents, and two clinical fellows) independently performed simulation surgeries three times each. Surgical proficiency was evaluated by an experienced cardiothoracic surgeon on a 1–10 scale for each of the 10 surgical procedures. The times required for each surgical procedure were also measured. Results: In the simulation surgeries, six surgeons required a median of 34.4 (range 32.5–43.5) and 21.4 (17.9–192.7) minutes to apply the ventricular septal defect (VSD) and right ventricular outflow tract (RVOT) patches, respectively, on their first simulation surgery. These times had significantly reduced to 17.3 (16.2–29.5) and 13.6 (10.3–30.0) minutes, respectively, in the third simulation surgery (p = 0.03 and p = 0.01, respectively). The decreases in the median patch appliance time among the six surgeons were 16.2 (range 13.6–17.7) and 8.0 (1.8–170.3) minutes for the VSD and RVOT patches, respectively. Summing the scores for the 10 procedures showed that the attendees scored an average of 28.58 ± 7.89 points on the first simulation surgery and improved their average score to 67.33 ± 15.10 on the third simulation surgery (p = 0.008). Conclusion Inexperienced cardiothoracic surgeons improved their performance in terms of surgical proficiency and operation time during the experience of three simulation surgeries using a 3D-printed TOF model using Tango 27 composite.

Objective: To evaluate the impact of surgical simulation training using a three-dimensional (3D)-printed model of tetralogy of Fallot (TOF) on surgical skill development. Materials and Methods: A life-size congenital heart disease model was printed using a Stratasys Object500 Connex2 printer from preoperative electrocardiography-gated CT scans of a 6-month-old patient with TOF with complex pulmonary stenosis.Eleven cardiothoracic surgeons independently evaluated the suitability of four 3D-printed models using composite Tango 27, 40, 50, and 60 in terms of palpation, resistance, extensibility, gap, cut-through ability, and reusability of. Among these, Tango 27 was selected as the final model. Six attendees (two junior cardiothoracic surgery residents, two senior residents, and two clinical fellows) independently performed simulation surgeries three times each. Surgical proficiency was evaluated by an experienced cardiothoracic surgeon on a 1–10 scale for each of the 10 surgical procedures. The times required for each surgical procedure were also measured. Results: In the simulation surgeries, six surgeons required a median of 34.4 (range 32.5–43.5) and 21.4 (17.9–192.7) minutes to apply the ventricular septal defect (VSD) and right ventricular outflow tract (RVOT) patches, respectively, on their first simulation surgery. These times had significantly reduced to 17.3 (16.2–29.5) and 13.6 (10.3–30.0) minutes, respectively, in the third simulation surgery (p = 0.03 and p = 0.01, respectively). The decreases in the median patch appliance time among the six surgeons were 16.2 (range 13.6–17.7) and 8.0 (1.8–170.3) minutes for the VSD and RVOT patches, respectively. Summing the scores for the 10 procedures showed that the attendees scored an average of 28.58 ± 7.89 points on the first simulation surgery and improved their average score to 67.33 ± 15.10 on the third simulation surgery (p = 0.008). Conclusion Inexperienced cardiothoracic surgeons improved their performance in terms of surgical proficiency and operation time during the experience of three simulation surgeries using a 3D-printed TOF model using Tango 27 composite.

Background: Awake craniotomy is a well-tolerated procedure for the resection of brain tumors residing within or close to the eloquent cortical areas. Monitored anesthesia care (MAC) is a dominant anesthetic approach for awake craniotomy; however, it is associated with inherent challenges such as desaturation and hypercapnia, which may lead to various complications. The prevention of respiratory insufficiency is important for successful awake craniotomy. As measures to avoid respiratory depression, the use of high-flow nasal cannula (HFNC) can improve patient oxygenation and monitor the oxygen reserve index (ORi) to detect hypoxia earlier. Case: We report two cases of awake craniotomy with MAC using HFNC and ORi. We adjusted the fraction of inspired oxygen of the HFNC according to the ORi level. The patient underwent successful awake craniotomy without a desaturation event or additional airway intervention. Conclusions Combined HFNC and ORi monitoring may provide adequate oxygen reserves in patients undergoing awake craniotomy.

A 59-year-old man presented for possible durable ventricular assist device (VAD) implantation. He had previously been diagnosed with congenitally corrected transposition of the great arteries, a ventricular septal defect, an atrial septal defect, pulmonary valve stenosis, and aortic valve regurgitation. In the previous 22 years, he had undergone palliative cardiac surgery 3 times. VAD implantation as a bridge to transplantation was planned. Owing to severe adhesions, mesocardia, a left ascending aorta, and moderate aortic regurgitation, we performed VAD implantation and aortic valve closure via a dual left thoracotomy and partial sternotomy.

Background: The study was planned to show the status of indoor microorganisms and the status of the reduction device in the military dog clinic. Methods: Airborne microbes were analyzed according to the number of daily patient canines. For identification of bacteria, sampled bacteria was identified using VITEK®2 and molecular method. The status of indoor microorganisms according to the operation of the ventilation system was analyzed. Results: Airborne bacteria and fungi concentrations were 1000.6 ± 800.7 CFU/m3 and 324.7 ± 245.8 CFU/m3. In the analysis using automated identification system, based on fluorescence biochemical test, VITEK®2, mainly human pathogenic bacteria were identified. The three most frequently isolated genera were Kocuria (26.6%), Staphylococcus (24.48%), and Granulicatella (12.7%). The results analyzed by molecular method were detected in the order of Kocuria (22.6%), followed by Macrococcus (18.1%), Glutamicibacter (11.1%), and so on. When the ventilation system was operated appropriately, the airborne bacteria and fungi level were significantly decreased. Conclusion Airborne bacteria in the clinic tend to increase with the number of canines. Human pathogenic bacteria were mainly detected in VITEK®2, and relatively various bacteria were detected in molecular analysis. A decrease in the level of bacteria and fungi was observed with proper operation of the ventilation system.