ObjectiveTo study the changing law of appearance color and physicochemical properties of Angelicae Sinensis Radix Carbonisata（ASRC） during the processing by color space method combined with statistical analysis， so as to provide reference for determining the processing endpoint and evaluating the quality of the decoction pieces. MethodsTaking processing time（4， 8， 12， 16 min） and temperature（180， 200， 220， 240 ℃） as factors， ASRC decoction pieces with different processing degrees were prepared in a completely randomized design. Then， the brightness value（L^*）， red-green value（a^*）， yellow-blue value（b^*）， and total chromaticity value （E^*ab） of the decoction pieces were determined by spectrophotometer， the color difference value（ΔE） was calculated， and the data of colorimetric values were analyzed by discriminant analysis. At the same time， the pH， charcoal adsorption， and contents of tannins， 5-hydroxymethylfurfural（5-HMF）， tryptophan， chlorogenic acid， ferulic acid， senkyunolide I， senkyunolide H and ligustilide of ASRC with different processing degrees were determined by pH meter， ultraviolet and visible spectrophotometry and ultra-high performance liquid chromatography（UPLC）. Principal component analysis（PCA） was used to analyze the data of physicochemical indexes， after determining the processing technology of ASRC， the canonical discriminant function was established to distinguish the decoction pieces with different processing degrees， and leave-one-out cross validation was conducted. Finally， Pearson correlation analysis was used to explore the correlation between various physicochemical indexes and chromaticity values. ResultsWith the prolongation of the processing time， L^*， a^*， b^* and E^*ab all showed a decreasing trend， and the established discriminant model based on color parameters was able to distinguish ASRC with different processing degrees. The pH showed an increasing trend with the prolongation of processing time， and the charcoal adsorption， and the contents of tannins， 5-HMF， and tryptophan all showed an increasing and then decreasing trend. Among them， the charcoal adsorption， contents of tannin and 5-HMF reached their maximum values successively after processing for 8-12 min. While the contents of chlorogenic acid， ferulic acid， senkyunolide I， senkyunolide H and ligustilide decreased with the increase of processing time， with a decrease of 60%-80% at 8 min of processing. Therefore， the optimal processing time should be determined to be 8-12 min. PCA could clearly distinguish ASRC with different processing degrees， while temperature had no significant effect on the processing degree. The 12 batches of process validation results（10 min， 180-240 ℃） showed that except for 3 batches identified as class Ⅱ light charcoal， all other batches were identified as class Ⅲ standard charcoal， and the chromaticity values of each batch of ASRC were within the reference range of class Ⅱ-Ⅲ sample chromaticity values. The correlation analysis showed that the chromaticity values were negatively correlated with pH and charcoal adsorption， and positively correlated with contents of tryptophan， chlorogenic acid， ferulic acid， senkyunolide I， senkyunolide H， and ligustilide. And both pH and charcoal adsorption were negatively correlated with the contents of the above components， but the charcoal adsorption was positively correlated with the content of 5-HMF. ConclusionThe chromaticity values and the contents of various physicochemical indicators of ASRC undergo significant changes with the prolongation of processing time， and there is a general correlation between chromaticity values and various physicochemical indicators. Based on the changes in color and physicochemical indicators， the optimal processing time for ASRC is determined to be 8-12 min. This study reveals the dynamic changes of the relevant indexes in the processing of ASRC， which can provide a reference for the discrimination of the processing degree and the quantitative study of the processing endpoint.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

Objective: To investigate the nutritional status and influencing factors among Tibetan and Mongolian children and adolescents aged 7-18 years in high-altitude regions, so as to provide evidence for early prevention and control of malnutrition in this population. Methods: From May to June 2022, a cluster sampling method was employed to recruit 1 019 Tibetan and Mongolian children and adolescents aged 7-18 years from two primary and secondary schools in Golmud City. Physical examinations, dietary frequency questionnaires, and physical activity assessments were conducted. Nutritional status was classified as obesity, combined overweight/obesity, underweight, or central obesity according to national standards including Screening for Overweight and Obesity among School-age Children and Adolescents, Screening Standard for Malnutrition of School-age Children and Adolescents, Blue Book on Obesity Prevention and Control in China. Chi-square tests, t-test and Logistic regression analyses were performed to identify factors associated with different nutritional statuses. Results: The detection rates of obesity, combined overweight/obesity, underweight, and central obesity were 8.0%, 18.1%, 5.2%, and 19.7%, respectively. The height of children and adolescents across all age groups was generally lower than the national standard values. Tibetan participants exhibited significantly lower height-for-age Z-scores (HAZ)(9-10, 13-17 years, Z =2.01, 2.78, 4.16, 3.38, 4.12, 3.63, 3.00) and BMI-for-age Z-scores (BAZ) compared to Mongolian participants ( Z =-2.95, -2.47, -2.31, -2.89, -2.14, -2.17)( P < 0.05 ). Multivariate Logistic regression revealed that Mongolian children and adolescents had higher risks of obesity ( OR =2.20) and combined overweight/obesity ( OR = 2.18 ) ( P <0.05). Additionally, insufficient moderate-to-vigorous physical activity (MVPA) was associated with an increased risk of central obesity ( OR =1.48, P <0.05), compared with children and adolescents who meet the standard of MVPA. Conclusions The rates of overweight and obesity among Tibetan and Mongolian children and adolescents in Golmud City are higher, influenced by multiple factors. Nutrition interventions and physical activity strategies tailored to ethnic characteristics should be implemented, with emphasis on promoting MVPA to improve nutritional outcomes in this population.

Objective: To investigate the hygienic status of the central air conditioner ventilation system in public places in urban areas of Ma'anshan City, Anhui Province, so as to provide insights into formulation of supervision and management interventions. Methods: A total of 15 public places with the central air conditioner ventilation system were randomly sampled from main urban areas in Ma'anshan City in 2022. Sampling and detection were performed following the standard GB/T 18204.5—2013 Examination methods for public places Part 5: Central air conditioning ventilation system, including total number of bacteria and total number of fungus on the inner surface of wind pipes, total number of bacteria and fungus, particulate matter (PM10) and β-hemolytic streptococci in the air supply system, and Legionella pneumophila in the cooling water, and the detection indicators were assessed following the WS 394—2012 Guideline for hygiene of the central air conditioner ventilation system in public places. The eligible rate of samples, the detection rate of L. pneumophila were analyzed. Results: A total of 368 samples were collected from 15 public places, and the qualified rate was 50.54%, no places had all eligible measurement indicators. The qualified rates of total bacteria and fungus numbers on the inner surface of wind pipes were 52.67% and 59.33%. The qualified rates of total bacterium number, total fungus number, PM10 and β-hemolytic streptococci were 12.00%, 28.00%, 90.00% and 96.00% in the air supply system. The qualified rates of samples in administrative workplaces, hotels, bathing places and malls (supermarkets) were 32.50%, 59.24%, 61.09% and 68.92%, the qualified rates of total bacteria on the inner surface of air ducts were 8.33%, 72.46%, 66.67% and 61.90%, and the qualified rates of total fungus numbers in air supply were 0, 21.70%, 33.30% and 71.40%, respectively, with statistical significance (P<0.05). A total of 18 cooling water samples were collected, and L. pneumophila was detected in three samples (16.67%). Conclusions Poor hygiene is seen in the central air conditioning ventilation systems in public places in main urban areas of Ma'anshan City. High attention needs to be paid to contamination of bacterium, fungus and L. pneumophila, and expansion of supervision coverage and improved supervision intensity are recommended.

【Objective】 To analyze the height growth of children aged 6 - 15 years in Nanning, Guangxi Zhuang Autonomous Region, so as to provide evidence for the assessment of local children′s height development. 【Methods】 A total of 25 225 children aged 6 - 15 years were selected to get their physical examination data from 41 primary schools in Nanning by stratified cluster sampling method in December 2021.Then the height data were compared with the current domestic standards. 【Results】 The average height of boys in Nanning was lower than the national standard before the age of 10 years and 7 months, and the gap with the national standard gradually narrowed after the age of 10 years and 7 months. The average height of boys in Nanning City exceeded the national standard between the age of 11 years and 1 month and 13 years and 6 months, and then lagged behind the national standard again after the age of 13 years and 7 months. The mean height of girls in Nanning City was lower than the national standard height in several age groups, and it was more obvious before the age of 9 years and 7 months. The proportion of height ≤-2s,≤-s,≥ +s and ≥+2s in boys aged 6 to 15 years in Nanning City fluctuated from 2.59% to 6.04%, 12.09% to 23.43%, 7.18% to 18.79% and 0.93% to 3.14%, respectively; the total proportions were 4.56%, 17.46%, 11.35% and 1.74%, respectively; the minimum/maximum proportion values of each height group were at 11 years old /8 years old, 14 years old/8 years old, 8 years old/12 years old, and 6 years old/11 years old, respectively. The proportions of girls aged 6 - 15 years in Nanning City with height ≤-2s, ≤-s, ≥+s, and ≥+2s fluctuated from 2.06% to 5.19%, 9.35% to 25.15%, 8.21% to 15.80% and 1.23% to 3.49%, respectively; the total proportions were 3.38%, 16.91%, 11.97% and 2.29%, respectively; and the minimum/maximum proportion values of each height group were at 13 years old/6 years old, 12 years old/6 years old, 7 years old/12 years old, and 6 years old/11 years old, respectively. 【Conclusions】 The overall height level of children in Nanning is still lower than the national level, with short prepubertal basal heights, an earlier age of onset of accelerated pubertal height, and a shorter duration of accelerated pubertal height in boys. Strengthening pre-pubertal height management and emphasizing the onset and duration of children′s pubertal development, especially the height development of boys during puberty, can help improve the adult lifelong height of children in this region.

BACKGROUND:Pulsed electromagnetic fields,as an important physical therapy,are exactly effective in the treatment of osteoarthritis,but the mechanism has not been fully clarified. OBJECTIVE:To observe the effect of pulsed electromagnetic field on the degeneration of knee joint cartilage in aged rats. METHODS:Eight 6-month-old Sprague-Dawley rats were selected as the young group and were subjected to normal diet with no treatment.Sixteen 22-month-old Sprague-Dawley rats were randomly divided into old group(n=8)and pulsed electromagnetic field group(n=8).The rats in the pulsed electromagnetic field group were subjected to a pulsed electromagnetic field intervention,once a day,5 days per week for continuous 8 weeks.The rats in the old group were given no treatment.All rats were anesthetized and executed after 8 weeks for the detection of relevant indexes. RESULTS AND CONCLUSION:Compared with the young group,serum type Ⅱ collagen C-terminal peptide level was increased in the old group(P<0.05);compared with the old group,serum type Ⅱ collagen C-terminal peptide level was decreased in the pulsed electromagnetic field group(P<0.05).Micro-CT showed that the bone volume fraction,bone mineral density,and number of bone trabeculae decreased(P<0.05)and the trabecular separation increased(P<0.05)in the tibia of rats in the aged group compared with the young group;and the bone volume fraction,bone density,and number of trabeculae increased(P<0.05)and the trabecular separation decreased(P<0.05)in the tibia of rats in the pulsed electromagnetic field group compared with the aged group.The tibial plateau Safranin O-fast green staining showed that the articular cartilage structure of rats in the aged group was disorganized,and the number of chondrocytes was obviously reduced,and the tidal line could not be distinguished.The above results were improved in the pulsed electromagnetic field group.RT-qPCR and western blot assay showed that the mRNA and protein expression levels of matrix metalloproteinase 1,matrix metalloproteinase 13,P53 and P21 in the articular cartilage and subchondral bone of rats were elevated in the aged group compared with the young group(P<0.05)and decreased in the pulsed electromagnetic field group compared with the old group(P<0.05).To conclude,pulsed electromagnetic fields may improve osteoarthritis in aged rats by inhibiting chondrocyte senescence,alleviating articular cartilage degradation and inhibiting subchondral bone osteoporosis through suppressing the expression of P53/P21.

AIM To explore the clinical effects of Supplemented Buzhong Yiqi Decoction on patients with HP-positive chronic atrophic gastritis of Spleen-Stomach Deficiency Pattern.METHODS One hundred and thirty-two patients were randomly assigned into control group(66 cases)for 12-week intervention of conventional treatment,and observation group(66 cases)for 12-week intervention of both Supplemented Buzhong Yiqi Decoction and conventional treatment.The changes in clinical effects,HP clearance rate,miR-32,TGF-β1,IL-6,PGⅠ,PGⅡ,EGF,somatostatin,gastrin,motilin,gastroscopy pathological score and TCM symptom score were detected.RESULTS The observation group demonstrated higher total effective rate and HP clearance rate than the control group(P<0.05).After the treatment,the two groups displayed decreased miR-32,TGF-β1,IL-6,gastroscopy pathological score,TCM symptom score(P<0.05),and increased PGⅠ,PGⅡ,EGF,somatostatin,gastrin,motilin(P<0.05),especially for the observation group(P<0.05).CONCLUSION For the patients with HP-positive chronic atrophic gastritis of Spleen-Stomach Deficiency Pattern,Supplemented Buzhong Yiqi Decoction can alleviate inflammation,regulate gastrointestinal hormone levels,improve symptoms,and enhance efficacy.

Objective: To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening (microstomia) due to systemic scleroderma. Methods: This study followed medical ethics, and informed consent has been obtained from patients. A case of Ken's Type I mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression. Individual trays were made based on the patient's left and right mandibular dentition, and segmented molds were obtained. Simultaneously, intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles. After each part of the model was obtained, the mandibular model was scanned and digitally aligned to form the final denture model, and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing (CAD/CAM) technology. At the same time, combined with the literature, the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed. Results: The denture was well retained and achieved a good repair effect. The patients expressed satisfaction with the mastication efficiency and other functions of the denture. The findings of the literature review show that the integration of digital technology with the traditional impression method, along with computer fitting, can accurately obtain the patient's oral model and facilitate successful follow-up repairs. However, when the anterior mandibular dentition of the patient is absent, the margin of error is increased in this procedure, which deserves further exploration. Conclusion Utilizing digital technology as the leading method, combined with the traditional impression method of segmental impression, for the repair of dental defects in patients with limited mouth opening, has proven to be effective. Thus, patients report a positive medical experience with high satisfaction, indicating that this approach is worthy of clinical promotion.

In order to provide basic information for the utilization and development of famous classical formulas containing Bletillae Rhizoma， this article systematically analyzes the historical evolution of the name， origin， harvesting and processing of Bletillae Rhizoma by reviewing the ancient materia medica， prescription books， medical books and modern literature. The research results showed that Baiji（白及） was the main name， some scholars took Baiji（白芨） as its main name， and there were many other names such as Baiji（白给）， Baigen（白根）， Baiji（白苙）. The mainstream source of Bletillae Rhizoma was the tubers of Bletilla striata， and drying， large， white， solid， root-free and skin removed completely were the good quality standards. With the promotion of wild to cultivated medicinal materials， there were certain differences between their traits， and the quality evaluation indexes should be adjusted accordingly. The origin of records in the past dynasties was widely distributed， with Guizhou and Sichuan having high production and good quality in modern times. The harvesting period is mostly in spring and autumn， and harvested in autumn was better. The processing and processing technology is relatively simple， and it was used fresh or powdered in past dynasties， while it is mainly sliced for raw use in modern times. Based on the results， it is suggested that the tubers of Bletilla striata of Orchidaceae should be used in the famous classical formulas， and it should be uniformly written as Baiji（白及）. And if the original formula indicates the requirement of processing， it should be operated according to the requirement， if the requirement of processing is not indicated， it can be used in raw form as medicine.