1.Comparison of the accuracy of an ultrasonic-based jaw tracking device with conventional electronic tracking device
Xinyi GU ; Tingzi HU ; Zidan ZHANG ; Fuming HE ; Jiejun SHI ; Haiping YANG
The Journal of Advanced Prosthodontics 2025;17(1):47-58
PURPOSE:
This study aimed to evaluate the accuracy of the ultrasonic jaw tracking system by comparing with the conventional electronic system in recording condylar movements.
MATERIALS AND METHODS:
Twenty-six subjects with normal occlusion participated in the study. The CADIAX® 4 and Jaw Motion Analyzer (JMA) systems were used to record condylar movement trajectories during mandibular border movements (protrusive/retrusive, lateral, and wide mouth opening), with each movement repeated three times. Both systems used facebows and sensors to locate the condylar axis points and capture movement trajectory data. Paired t-tests were used for normally distributed data, while the Wilcoxon rank-sum test was applied to non-normally distributed data. The level of significance was set at α = .05.
RESULTS:
The maximum condylar displacement in the sagittal plane during mandibular border movements and the sagittal condylar inclination (SCI) values on both the left and right sides showed no significant difference between the two systems (P > .05). The Bennett angle (BA) values on both the left and right sides measured by the JMA system were significantly higher than those measured by the CADIAX® 4 system (P < .05). The comfort levels of the JMA system were significantly higher than the CADIAX® 4 system (P < .05).
CONCLUSION
Through this study, it was found that the accuracy of the ultrasonic jaw tracking system was comparable with the conventional electronic system, except for the Bennett angle measurement. In terms of comfort and ease of use, the ultrasonic jaw tracking system is more favored.
2.Comparison of the accuracy of an ultrasonic-based jaw tracking device with conventional electronic tracking device
Xinyi GU ; Tingzi HU ; Zidan ZHANG ; Fuming HE ; Jiejun SHI ; Haiping YANG
The Journal of Advanced Prosthodontics 2025;17(1):47-58
PURPOSE:
This study aimed to evaluate the accuracy of the ultrasonic jaw tracking system by comparing with the conventional electronic system in recording condylar movements.
MATERIALS AND METHODS:
Twenty-six subjects with normal occlusion participated in the study. The CADIAX® 4 and Jaw Motion Analyzer (JMA) systems were used to record condylar movement trajectories during mandibular border movements (protrusive/retrusive, lateral, and wide mouth opening), with each movement repeated three times. Both systems used facebows and sensors to locate the condylar axis points and capture movement trajectory data. Paired t-tests were used for normally distributed data, while the Wilcoxon rank-sum test was applied to non-normally distributed data. The level of significance was set at α = .05.
RESULTS:
The maximum condylar displacement in the sagittal plane during mandibular border movements and the sagittal condylar inclination (SCI) values on both the left and right sides showed no significant difference between the two systems (P > .05). The Bennett angle (BA) values on both the left and right sides measured by the JMA system were significantly higher than those measured by the CADIAX® 4 system (P < .05). The comfort levels of the JMA system were significantly higher than the CADIAX® 4 system (P < .05).
CONCLUSION
Through this study, it was found that the accuracy of the ultrasonic jaw tracking system was comparable with the conventional electronic system, except for the Bennett angle measurement. In terms of comfort and ease of use, the ultrasonic jaw tracking system is more favored.
3.Comparison of the accuracy of an ultrasonic-based jaw tracking device with conventional electronic tracking device
Xinyi GU ; Tingzi HU ; Zidan ZHANG ; Fuming HE ; Jiejun SHI ; Haiping YANG
The Journal of Advanced Prosthodontics 2025;17(1):47-58
PURPOSE:
This study aimed to evaluate the accuracy of the ultrasonic jaw tracking system by comparing with the conventional electronic system in recording condylar movements.
MATERIALS AND METHODS:
Twenty-six subjects with normal occlusion participated in the study. The CADIAX® 4 and Jaw Motion Analyzer (JMA) systems were used to record condylar movement trajectories during mandibular border movements (protrusive/retrusive, lateral, and wide mouth opening), with each movement repeated three times. Both systems used facebows and sensors to locate the condylar axis points and capture movement trajectory data. Paired t-tests were used for normally distributed data, while the Wilcoxon rank-sum test was applied to non-normally distributed data. The level of significance was set at α = .05.
RESULTS:
The maximum condylar displacement in the sagittal plane during mandibular border movements and the sagittal condylar inclination (SCI) values on both the left and right sides showed no significant difference between the two systems (P > .05). The Bennett angle (BA) values on both the left and right sides measured by the JMA system were significantly higher than those measured by the CADIAX® 4 system (P < .05). The comfort levels of the JMA system were significantly higher than the CADIAX® 4 system (P < .05).
CONCLUSION
Through this study, it was found that the accuracy of the ultrasonic jaw tracking system was comparable with the conventional electronic system, except for the Bennett angle measurement. In terms of comfort and ease of use, the ultrasonic jaw tracking system is more favored.
4.Comparison of the accuracy of an ultrasonic-based jaw tracking device with conventional electronic tracking device
Xinyi GU ; Tingzi HU ; Zidan ZHANG ; Fuming HE ; Jiejun SHI ; Haiping YANG
The Journal of Advanced Prosthodontics 2025;17(1):47-58
PURPOSE:
This study aimed to evaluate the accuracy of the ultrasonic jaw tracking system by comparing with the conventional electronic system in recording condylar movements.
MATERIALS AND METHODS:
Twenty-six subjects with normal occlusion participated in the study. The CADIAX® 4 and Jaw Motion Analyzer (JMA) systems were used to record condylar movement trajectories during mandibular border movements (protrusive/retrusive, lateral, and wide mouth opening), with each movement repeated three times. Both systems used facebows and sensors to locate the condylar axis points and capture movement trajectory data. Paired t-tests were used for normally distributed data, while the Wilcoxon rank-sum test was applied to non-normally distributed data. The level of significance was set at α = .05.
RESULTS:
The maximum condylar displacement in the sagittal plane during mandibular border movements and the sagittal condylar inclination (SCI) values on both the left and right sides showed no significant difference between the two systems (P > .05). The Bennett angle (BA) values on both the left and right sides measured by the JMA system were significantly higher than those measured by the CADIAX® 4 system (P < .05). The comfort levels of the JMA system were significantly higher than the CADIAX® 4 system (P < .05).
CONCLUSION
Through this study, it was found that the accuracy of the ultrasonic jaw tracking system was comparable with the conventional electronic system, except for the Bennett angle measurement. In terms of comfort and ease of use, the ultrasonic jaw tracking system is more favored.
5.Comparison of the accuracy of an ultrasonic-based jaw tracking device with conventional electronic tracking device
Xinyi GU ; Tingzi HU ; Zidan ZHANG ; Fuming HE ; Jiejun SHI ; Haiping YANG
The Journal of Advanced Prosthodontics 2025;17(1):47-58
PURPOSE:
This study aimed to evaluate the accuracy of the ultrasonic jaw tracking system by comparing with the conventional electronic system in recording condylar movements.
MATERIALS AND METHODS:
Twenty-six subjects with normal occlusion participated in the study. The CADIAX® 4 and Jaw Motion Analyzer (JMA) systems were used to record condylar movement trajectories during mandibular border movements (protrusive/retrusive, lateral, and wide mouth opening), with each movement repeated three times. Both systems used facebows and sensors to locate the condylar axis points and capture movement trajectory data. Paired t-tests were used for normally distributed data, while the Wilcoxon rank-sum test was applied to non-normally distributed data. The level of significance was set at α = .05.
RESULTS:
The maximum condylar displacement in the sagittal plane during mandibular border movements and the sagittal condylar inclination (SCI) values on both the left and right sides showed no significant difference between the two systems (P > .05). The Bennett angle (BA) values on both the left and right sides measured by the JMA system were significantly higher than those measured by the CADIAX® 4 system (P < .05). The comfort levels of the JMA system were significantly higher than the CADIAX® 4 system (P < .05).
CONCLUSION
Through this study, it was found that the accuracy of the ultrasonic jaw tracking system was comparable with the conventional electronic system, except for the Bennett angle measurement. In terms of comfort and ease of use, the ultrasonic jaw tracking system is more favored.
6.Research progress in nanoparticle-mediated cryoablation therapy for tumors
Journal of Interventional Radiology 2024;33(2):197-201
Cryoablation is a local ablation treatment based on the hypothermia effect,which has been widely used in the treatment of various solid tumors throughout the body.However,low freezing efficiency and insufficient accuracy are the problems in clinical cryoablation therapy which need to be solved urgently.With the continuous progress of nanoscience,various types of nanoparticles have been developed and applied in clinical practice.After being loaded into the target area,the nanoparticles can exert functions such as targeted drug delivery as well as image enhancement,which provides the possibility to break through the current clinical application bottleneck of cryoablation therapy.This paper aims to make a comprehensive review about several currently commonly-used nanoparticles for cryoablation therapy,focusing on their main functions and mechanisms,with the hope that the physicians concerned can get a further detailed understanding of the nanoparticles and lay a solid foundation for conducting in-depth researches and achieving clinical transformation.
7.Timing and surgery option of keratinized mucosa augmentation around implant site
Hang YANG ; Jie NI ; Wei LU ; Xiaojun LI ; Fuming HE
Chinese Journal of Stomatology 2024;59(2):182-190
In recent years, clinicians have paid more attention to the biological and esthetic effects of the 2 mm keratinized mucosa width (KMW) around dental implant. How to increase the keratinized mucosa is the focus of clinicians. While the free gingival graft (FGG) is still the gold standard of keratinized mucosa augmentation, alveolar ridge preservation (ARP), connective tissue graft (CTG) and apically positioned flap (APF) can also be used to obtain more than 2 mm keratinized mucosa width when they are used before implantation, with implantation, within the implant-healing phase, with second stage of implantation or after rehabilitation according to different indications. This article comprehensively summarizes the influencing factors of timing and surgical procedures for keratinized mucosa augmentation, providing guidance for clinicians to treat peri-implant keratinized mucosa deficiencies.
8.Effect of Coptidis Rhizoma-Fermentum Rubrum on Non-Alcoholic Fatty Liver Disease in Mice Based on Nrf2/GPX4 Ferroptosis Axis
Yang YANG ; Xiaobo ZHANG ; Yong ZHANG ; Fuming LU ; Yaqi LUO ; Xiaoyi WU
Chinese Journal of Experimental Traditional Medical Formulae 2024;30(20):30-36
ObjectiveTo observe the effects of Coptidis Rhizoma-Fermentum Rubrum on non-alcoholic fatty liver disease (NAFLD) in mice and explore its possible mechanisms. MethodSixty male SPF C57BL/6J mice were randomly divided into six groups: control group, model group, low-, medium-, and high-dose Coptidis Rhizoma-Fermentum Rubrum group (0.75, 1.5, 3 g·kg-1), and metformin group (0.075 g·kg-1), with 10 mice in each group. NAFLD mouse models were induced by high-fat diet feeding for 24 weeks. The low, medium, and high-dose Coptidis Rhizoma-Fermentum Rubrum groups were administered corresponding doses of Coptidis Rhizoma-Fermentum Rubrum by gavage, while the control and model groups received an equivalent amount of saline for four weeks. Serum total cholesterol (TC), triglycerides (TG), free fatty acids (FFA), and liver function markers including alanine aminotransferase (ALT) and aspartate aminotransferase (AST) were measured using an automatic biochemical analyzer. Hematoxylin-eosin (HE) and oil red O staining were used to detect liver lipid deposition, and Prussian blue staining was used to measure liver ferrous ion levels. Western blot was performed to detect the expression of key proteins in the nuclear factor erythroid-2-related factor 2 (Nrf2)-glutathione peroxidase 4 (GPX4) axis. ResultAfter 24 weeks of high-fat feeding, compared with the control group, the model group showed significant increases in body weight, liver weight and liver index, and serum lipid levels (P<0.01), as well as substantial hepatic lipid deposition with marked steatosis. Compared with the model group, Coptidis Rhizoma-Fermentum Rubrum intervention reduced body weight (P<0.01), liver weight and liver index (P<0.01), and serum lipid levels (P<0.05, P<0.01), improved liver function (P<0.01), and decreased hepatic lipid deposition, with the low-dose Coptidis Rhizoma-Fermentum Rubrum group showing the best effect. Western blot results showed that compared with those in the control group, the expression levels of Nrf2, heme oxygenase-1 (HO-1), kelch-like ECH-associated protein 1(Keap1), and GPX4 proteins in the model group were decreased (P<0.05, P<0.01). Compared with the model group, Coptidis Rhizoma-Fermentum Rubrum increased the expression levels of these proteins (P<0.05, P<0.01). ConclusionCoptidis Rhizoma-Fermentum Rubrum can alleviate fatty liver in mice, improve liver function, and reduce hepatic lipid deposition, possibly by regulating the Nrf2/GPX4 ferroptosis axis.
9.Characteristics of malaria cases in Lishui City from 2012 to 2023
YE Xialiang ; CHEN Xiuying ; RUAN Wei ; YU Yang ; PAN Xiaomeng ; LU Yuzhong ; LIU Wujing ; LIU Fuming ; TAO Tao
Journal of Preventive Medicine 2024;36(9):809-812
Objective:
To investigate the characteristics and trends of malaria cases in Lishui City, Zhejiang Province from 2012 to 2023, so as to provide a basis for improving malaria prevention and control measures.
Methods:
Case data of malaria in Lishui City from 2012 to 2023 were collected from the Parasitic Disease Control Information Management System of the National Information System for Disease Control and Prevention in China. The parasite species, source of infection, temporal distribution, population distribution, geographical distribution, and clinical diagnosis and treatment of the cases were descriptively analyzed.
Results:
A total of 169 malaria cases were reported in Lishui City from 2012 to 2023, and P. falciparum malaria was the main type, accounting for 79.88% (135 cases). The positive rate of Plasmodium detection was 3.30‰(169/51 212), the highest was 5.41‰ (18/3 327) in 2017, and the lowest was 0.38‰ (1/2 632) in 2021. Malaria cases were reported in every month from 2012 to 2023, with 91 cases (53.85%) reported from May to October. There were 168 imported cases, of which 163 (96.45%) originated from Africa. There were 127 male cases (75.15%), and the majority of cases were aged 20 to 49 years, with 138 cases accounting for 81.65%. The majority of the occupation was overseas labor export workers, with 164 cases accounting for 97.04%. A total of 161 cases (95.27%) were registered residents of Lishui City, and cases were reported from all nine counties (cities, districts), with Qingtian County and Liandu District having the higher numbers of 98 and 41 cases, respectively. The median interval from onset to hospital visit for malaria cases was 2.00 (interquartile range, 4.00) days, and the median interval from hospital visit to diagnosis was 0 (interquartile range, 1.00) day. The diagnostic rate of first-diagnosed malaria cases in municipal and county medical institutions was 95.90% (117/122) and 91.49% (43/47), respectively, with no statistical significance (P>0.05).
Conclusions
The P. falciparum malaria was the predominant type in Lishui City from 2012 to 2023, with the majority of cases being imported. Male overseas labor export personnel aged 20 to <50 were the key demographic.
10.Analysis of surgical situations and prognosis of pancreaticoduodenectomy in Jiangsu province (a report of 2 886 cases)
Zipeng LU ; Xin GAO ; Hao CHENG ; Ning WANG ; Kai ZHANG ; Jie YIN ; Lingdi YIN ; Youting LIN ; Xinrui ZHU ; Dongzhi WANG ; Hongqin MA ; Tongtai LIU ; Yongzi XU ; Daojun ZHU ; Yabin YU ; Yang YANG ; Fei LIU ; Chao PAN ; Jincao TANG ; Minjie HU ; Zhiyuan HUA ; Fuming XUAN ; Leizhou XIA ; Dong QIAN ; Yong WANG ; Susu WANG ; Wentao GAO ; Yudong QIU ; Dongming ZHU ; Yi MIAO ; Kuirong JIANG
Chinese Journal of Digestive Surgery 2024;23(5):685-693
Objective:To investigate the surgical situations and perioperative outcome of pancreaticoduodenectomy in Jiangsu Province and the influencing factors for postoperative 90-day mortality.Methods:The retrospective case-control study was conducted. The clinicopathological data of 2 886 patients who underwent pancreaticoduodenectomy in 21 large tertiary hospitals of Jiangsu Quality Control Center for Pancreatic Diseases, including The First Affiliated Hospital of Nanjing Medical University, from March 2021 to December 2022 were collected. There were 1 732 males and 1 154 females, aged 65(57,71)years. Under the framework of the Jiangsu Provincial Pancreatic Disease Quality Control Project, the Jiangsu Quality Control Center for Pancreatic Diseases adopted a multi-center registration research method to establish a provincial electronic database for pancrea-ticoduodenectomy. Observation indicators: (1) clinical characteristics; (2) intraoperative and post-operative conditions; (3) influencing factors for 90-day mortality after pancreaticoduodenectomy. Measurement data with skewed distribution were represented as M( Q1, Q3) or M(IQR), and comparison between groups was conducted using the Mann-Whitney U test. Count data were expressed as absolute numbers or constituent ratio, and comparison between groups was conducted using the chi-square test, continuity correction chi-square test and Fisher exact probability. Maximal Youden index method was used to determine the cutoff value of continuous variables. Univariate analysis was performed using the corresponding statistical methods based on data types. Multivariate analysis was performed using the Logistic multiple regression model. Results:(1) Clinical characteristics. Of the 2 886 patients who underwent pancreaticoduodenectomy, there were 1 175 and 1 711 cases in 2021 and 2022, respectively. Of the 21 hospitals, 8 hospitals had an average annual surgical volume of <36 cases for pancreaticoduodenectomy, 10 hospitals had an average annual surgical volume of 36-119 cases, and 3 hospitals had an average annual surgical volume of ≥120 cases. There were 2 584 cases performed pancreaticoduodenectomy in thirteen hospitals with an average annual surgical volume of ≥36 cases, accounting for 89.536%(2 584/2 886)of the total cases. There were 1 357 cases performed pancrea-ticoduodenectomy in three hospitals with an average annual surgical volume of ≥120 cases, accounting for 47.020%(1 357/2 886) of the total cases. (2) Intraoperative and postoperative conditions. Of the 2 886 patients, the surgical approach was open surgery in 2 397 cases, minimally invasive surgery in 488 cases, and it is unknown in 1 case. The pylorus was preserved in 871 cases, not preserved in 1 952 cases, and it is unknown in 63 cases. Combined organ resection was performed in 305 cases (including vascular resection in 209 cases), not combined organ resection in 2 579 cases, and it is unknown in 2 cases. The operation time of 2 885 patients was 290(115)minutes, the volume of intra-operative blood loss of 2 882 patients was 240(250)mL, and the intraoperative blood transfusion rate of 2 880 patients was 27.153%(782/2 880). Of the 2 886 patients, the invasive treatment rate was 11.342%(327/2 883), the unplanned Intensive Care Unit (ICU) treatment rate was 3.087%(89/2 883), the reoperation rate was 1.590%(45/2 830), the duration of postoperative hospital stay was 17(11)days, the hospitalization mortality rate was 0.798%(23/2 882), and the failure rate of rescue data in 2 083 cases with severe complications was 6.529%(19/291). There were 2 477 patients receiving postoperative 90-day follow-up, with the 90-day mortality of 2.705%(67/2477). The total incidence rate of complication in 2 886 patients was 58.997%(1 423/2 412). The incidence rate of severe complication was 13.970%(291/2 083). The comprehensive complication index was 8.7(22.6) in 2 078 patients. (3) Influencing factors for 90-day mortality after pancreaticoduodenectomy. Results of multivariate analysis showed that age ≥ 70 years, postoperative invasive treatment, and unplanned ICU treatment were independent risk factors for 90-day mortality after pancreaticoduodenectomy ( odds ratio=2.403, 2.609, 16.141, 95% confidence interval as 1.281-4.510, 1.298-5.244, 7.119-36.596, P<0.05). Average annual surgical volume ≥36 cases in the hospital was an independent protective factor for 90-day mortality after pancreaticoduodenectomy ( odds ratio=0.368, 95% confidence interval as 0.168-0.808, P<0.05). Conclusions:Pancreaticoduodenectomy in Jiangsu Province is highly con-centrated in some hospitals, with a high incidence of postoperative complications, and the risk of postoperative 90-day mortality is significant higher than that of hospitallization mortality. Age ≥ 70 years, postoperative invasive treatment, and unplanned ICU treatment are independent risk factors for 90-day motality after pancreaticoduodenectomy, and average annual surgical volume ≥36 cases in the hospital is an independent protective factor.


Result Analysis
Print
Save
E-mail