OBJECTIVE To evaluate the influence of pharmaceutical quality control on the efficiency and outcomes of standardized medication therapy management （MTM） services for patients with coronary heart disease by using Economic， Clinical and Humanistic Outcomes （ECHO） model. METHODS This study collected case data of coronary heart disease patients who received MTM services during January-March 2023 （pre-quality control implementation group， n＝96） and June-August 2023 （post-quality control implementation group， n＝164）. Using propensity score matching analysis， 80 patients were selected from each group. The study subsequently compared the economic， clinical， and humanistic outcome indicators of pharmaceutical services between the two matched groups. RESULTS There were no statistically significant differences in baseline data between the two groups after matching （P＞0.05）. Compared with pre-quality control implementation group， the daily treatment cost （16.26 yuan vs. 24.40 yuan， P＜0.001）， cost-effectiveness ratio [23.12 yuan/quality-adjusted life year （QALY） vs. 32.32 yuan/QALY， P＜0.001]， and the incidence of general adverse drug reactions （2.50% vs. 10.00%， P＝0.049） of post-quality control implementation group were decreased significantly； the utility value of the EuroQol Five-Dimensional Questionnaire （0.74± 0.06 vs. 0.71±0.07， P＝0.003）， the reduction in the number of medication related problems （1.0 vs. 0.5， P＜0.001）， the medication adherence score （[ 6.32±0.48） points vs. （6.10±0.37） points， P＝0.001]， and the satisfaction score （[ 92.56±1.52） points vs. （91.95±1.56） points， P＝0.013] all showed significant improvements. Neither group experienced serious adverse drug reactions. There was no statistically significant difference in the incidence of new adverse reactions between the two groups （1.25% vs. 3.75%， P＝0.310）. CONCLUSIONS Pharmaceutical quality control can improve the quality of pharmaceutical care， and the ECHO model can quantitatively evaluate the effect of MTM services， making pharmaceutical care better priced and more adaptable to social needs， thus being worthy of promotion.

BACKGROUND:Due to the sudden release and the rapid removal by proteases,platelet-rich plasma hydrogel leads to shorter residence times of growth factors at the wound site.In recent years,researchers have focused on the use of hydrogels to encapsulate platelet-rich plasma in order to improve the deficiency of platelet-rich plasma hydrogels. OBJECTIVE:To prepare self-assembled polypeptide-platelet-rich plasma hydrogel and to explore its effects on the release of bioactive factors of platelet-rich plasma. METHODS:The self-assembled polypeptide was synthesized by the solid-phase synthesis method,and the solution was prepared by D-PBS.Hydrogels were prepared by mixing different volumes of polypeptide solutions with platelet-rich plasma and calcium chloride/thrombin solutions,so that the final mass fraction of polypeptides in the system was 0.1%,0.3%,and 0.5%,respectively.The hydrogel state was observed,and the release of growth factors in platelet-rich plasma was detected in vitro.The polypeptide self-assembly was stimulated by mixing 1%polypeptide solution with 1%human serum albumin solution,so that the final mass fraction of the polypeptide was 0.1%,0.3%,and 0.5%,respectively.The flow state of the liquid was observed,and the rheological mechanical properties of the self-assembled polypeptide were tested.The microstructure of polypeptide(mass fraction of 0.1%and 0.001%)-human serum albumin solution was observed by scanning electron microscope and transmission electron microscope. RESULTS AND CONCLUSION:(1)Hydrogels could be formed between different volumes of polypeptide solution and platelet-rich plasma.Compared with platelet-rich plasma hydrogels,0.1%and 0.3%polypeptide-platelet-rich plasma hydrogels could alleviate the sudden release of epidermal growth factor and vascular endothelial growth factor,and extend the release time to 48 hours.(2)After the addition of human serum albumin,the 0.1%polypeptide group still exhibited a flowing liquid,the 0.3%polypeptide group was semi-liquid,and the 0.5%polypeptide group stimulated self-assembly to form hydrogel.It was determined that human serum albumin in platelet-rich plasma could stimulate the self-assembly of polypeptides.With the increase of the mass fraction of the polypeptide,the higher the storage modulus of the self-assembled polypeptide,the easier it was to form glue.(3)Transmission electron microscopy exhibited that the polypeptide nanofibers were short and disordered before the addition of human serum albumin.After the addition of human serum albumin,the polypeptide nanofibers became significantly longer and cross-linked into bundles,forming a dense fiber network structure.Under a scanning electron microscope,the polypeptides displayed a disordered lamellar structure before adding human serum albumin.After the addition of human serum albumin,the polypeptides self-assembled into cross-linked and densely arranged porous structures.(4)In conclusion,the novel polypeptide can self-assemble triggered by platelet-rich plasma and the self-assembly effect can be accurately adjusted according to the ratio of human serum albumin to polypeptide.This polypeptide has a sustained release effect on the growth factors of platelet-rich plasma,which can be used as a new biomaterial for tissue repair.

Objective:To explore the potential of integrating virtual surgery with three-dimensional (3D) printed guides in the surgical management of mandibular benign tumors and subsequent reconstruction of bone defects.Methods:A retrospective analysis was conducted on the clinical data of patients who underwent computer-assisted resection and vascularized fibular flap reconstruction for benign mandibular tumors at the Department of Oral and Maxillofacial Surgery, First Affiliated Hospital of Zhengzhou University, from June 2013 to December 2020. According to the utilization of guide plates for mandibular and fibular osteotomy during surgical procedures or not, the patients were categorized into two cohorts: a guide plate cohort and a non-guide plate cohort. In the guide plate group, custom-designed gudie plates based on virtual surgical plans were fabricated using 3D printing technology and employed intraoperatively; In the non-guide plate group, surgery was exclusively performed based on virtual surgical plan and prebent titanium plate without any supplementary plating. The measured outcomes included fibular flap osteotomy, operation duration, and clinical flap survival. Computed tomography images obtained one week post-surgery were utilized to assess the intersegmental commissure degree between fibular segments as well as between fibular segments and mandible, commissure degree between fibular segments and prebent titanium plate, and condyle position. The satisfaction of patients with their facial appearance was evaluated 6 months after the surgery using a visual analogue scale. Statistical analysis was conducted using SPSS 21.0 software. Independent sample t-tests was utilized to compare the duration of operation and and postoperative evaluation of facial appearance, the Chi-square tests was utilized for condyle position, commissure degrees among interactions involving fibular segments, prebent titanium plates, bone segments( P<0.05 denoted statistical significance). Results:A total of 30 patients were enrolled, comprising 17 males and 13 females, with a median age of 24 years (16-64 years). The preparation process of fibular flaps proceeded smoothly. The required length of fibula was measured as (14.1 ± 1.9) cm (5.7-18.1 cm), while the number of fibular segments ranged from 2 to 4, averaging at approximately 2.9 ± 0.6. The mandibular defects were repaired using a single-layer fibula in 12 cases, a vascularized folded fibula in 7 cases and a combination of vascularized and non-vascularized fibula in 11 cases. The operation time for the guide plate group was recorded as ( 335.9 ± 64.0) min (240-433 min), while it was observed to be (470.7 ± 140.5 ) min (280-680 min) for the non-guide plate group.The postoperative follow-up duration ranged from 9 to 23 months, with an average period of 11 months. All fibular flaps demonstrated clinical survival. The number of patients with good commissure degree between fibular and mandibular segments, between prebent titanium plate and fibular and mandibular segments and the position of condyle were 15, 15 and 13 cases in guide plate group, 10, 13 and 11 cases in non-guide plate group respectively. The statistical analysis revealed a significant difference ( P<0.05) in the degree of commissure between the fibular and the mandibular segments (15/15 vs. 10/15) in the two groups. Both groups exhibited high levels of satisfaction regarding their postoperative facial appearance at the 6 months follow-up, observed to be 9.6±0.5 and 9.3±0.5 respectively, and the statisticla analysis revealed non-significant difference ( P>0.05). Conclusion:The integration of virtual surgery with 3D printed guide plates can effectively reduce operative time and improve precision in the repair and reconstruction of free-fibular flaps following resection of benign tumors of the mandible.

Objective:To investigate the therapeutic effect of digital technology assisted design of fibula flap for the repair of maxillary tumor defect and implant denture.Methods:A retrospective analysis was performed in patients with benign maxillary tumors who were admitted to Department of Oral and Maxillofacial Surgery, the First Affiliated Hospital of Zhengzhou Universityfrom March 2018 to October 2020. Before the surgery, the virtual tumor resection, fibula reconstruction and stereomodels were printed for the fabrication of fibular osteotomy guide plates.And titanium plates were prefabricated with the stereomodels. Personalized titanium meshes were prebent manually. During the operation, the tumor was removed according to the osteotomy guide plate.The fibula was reshaped according to the surgical plan and the guide plate.And maxillary defects were reconstructed using the fibular flap combined with a prebent personalized titanium mesh.Straumann implants were implanted 6-9 months after bone grafting.The upper porcelain crown was repaired 3-4 months after implantation to restore the occlusal relationship and masticatory function. The facial appearance, masticatory function and peri-implant inflammation were followed up.Results:A total of 12 cases were included in this study, 7 males and 5 females, aged 20-55 years, with a median age 36 years old. Among them, there were 3 cases of ossifying fibroma, 7 cases of ameloblastoma, and 2 cases of odontogenic myxoma.According to the James Brown classification, there were 4 cases of Type Ⅱb, 3 cases of Type Ⅱc, 3 cases of Type Ⅱd, and 2 cases of Type Ⅲb. Tumor resection and fibula reconstruction went smoothly in 12 patients and all the free fibular flaps survived 14 days after surgery. The patients had maxillofacial symmetry, good occlusal relationship after the implant repair, and normal chewing and masticatory functions, after 12-48 months of follow-up, with an average of 26 months. The mouth opening reached 2.8-3.3 cm, without obvious peri-implantitis.Conclusion:The use of digital technology to design fibula flap to repair the defect after maxillary tumor resection and implant denture can not only restore the patients’ facial contour, but also restore their occlusal relationship and masticatory function.

Perimenopausal syndrome （MPS）， a common endocrine system disease， is one of the diseases responding specifically to traditional Chinese medicine （TCM）. The China Association of Chinese Medicine organized experts in endocrinology， gynecology， and interdisciplinary fields of both Western and Chinese medicine to discuss the advantages and challenges of diagnosing and treating MPS with Western medicine， TCM， and integrative medicine. Experts at the conference believe that MPS is initiated by estrogen decline and rooted in deficiency， with the pathogenesis being imbalance between Yin and Yang in the kidney. The hormone replacement therapy in Western medicine for menopause can rapidly alleviate related symptoms by quickly restoring the estrogen level and timely detect and delay complications of menopause， whereas such a therapy has certain risks， necessitating close monitoring of adverse reactions. Moreover， the various contraindications and precautions limit the clinical application of the hormone replacement therapy. TCM has advantages in synergistically alleviating symptoms such as hot flashes， sweating， sleep disorders， and emotional abnormalities of MPS without causing obvious adverse reactions. However， its efficacy is slower than the hormone replacement therapy， and the TCM evidence for preventing and treating complications of menopause remains unclear. Three suggestions were proposed for the future development of both Western and TCM for ameliorating MPS. First， an integrated diagnosis and treatment system for MPS with both Western and Chinese medicine should be established. Second， high-quality evidence-based interventions for MPS should be developed with TCM alone or in combination with Western medicine. Third， efforts should be made to promote the new TCM drug development and the interdisciplinary cooperation for treating MPS.

Objective To analyze the factors affecting pathological complete response(pCR)of triple-negative breast cancer(TNBC)patients after neoadjuvant chemotherapy,and construct a nomogram to forecast the pCR rate.Methods The clinical and pathological data of 348 TNBC patients who received neoadjuvant chemotherapy in the Air Force Medical University-Affiliated Xijing Hospital from May 2018 to May 2021 were collected and set as modeling set.The clinical and pathological data of 69 TNBC patients who received neoadjuvant chemotherapy in the Xi'an No.3 Hospital from May 2018 to May 2021 were collected and set as validation set.The clinical and pathological characteristics were compared between the modeling set and the validation set.In the modeling set,the independent risk factors of pCR in TNBC patients after neoadjuvant chemotherapy were screened by LASSO regression model analysis,and the nomogram model was constructed.Internal validation of the model was conducted using Bootstrap method,and the discrimination of the model was assessed by receiver operating characteristic(ROC)curve.The accuracy of the model was evaluated by the calibration curve and the clinical benefits and application value of the model were evaluated by clinical decision curve analysis(DCA).Results There were significant differences in surgical method and T stage between the patients in modeling set and validation set(P<0.05).The results of analysis of LASSO regression model showed that T stage,N stage,the use of platinum drugs and clinical efficacy evaluation were independent risk factors of pCR in TNBC patients after neoadjuvant chemotherapy(P<0.05).Based on the above variables,the nomogram models were constructed.In modeling set,area under curve(AUC)was 0.811(95%CI 0.763-0.859);in validation set,AUC was 0.801(95%CI 0.727-0.928).The Bootstrap method showed the C-index for internal validation was 0.79,indicating the model has good discrimination in both the modeling and validation sets.The calibration curve analysis showed that model predicted pCR rates had a good consistency with the actual observed values,and the DCA showed that model can bring clinical benefit.Conclusion The nomogram can accurately predict the pCR rates of TNBC patients after neoadjuvant chemotherapy and provide scientific basis for clinical diagnosis and treatment.

Objective:To explore the potential of integrating virtual surgery with three-dimensional (3D) printed guides in the surgical management of mandibular benign tumors and subsequent reconstruction of bone defects.Methods:A retrospective analysis was conducted on the clinical data of patients who underwent computer-assisted resection and vascularized fibular flap reconstruction for benign mandibular tumors at the Department of Oral and Maxillofacial Surgery, First Affiliated Hospital of Zhengzhou University, from June 2013 to December 2020. According to the utilization of guide plates for mandibular and fibular osteotomy during surgical procedures or not, the patients were categorized into two cohorts: a guide plate cohort and a non-guide plate cohort. In the guide plate group, custom-designed gudie plates based on virtual surgical plans were fabricated using 3D printing technology and employed intraoperatively; In the non-guide plate group, surgery was exclusively performed based on virtual surgical plan and prebent titanium plate without any supplementary plating. The measured outcomes included fibular flap osteotomy, operation duration, and clinical flap survival. Computed tomography images obtained one week post-surgery were utilized to assess the intersegmental commissure degree between fibular segments as well as between fibular segments and mandible, commissure degree between fibular segments and prebent titanium plate, and condyle position. The satisfaction of patients with their facial appearance was evaluated 6 months after the surgery using a visual analogue scale. Statistical analysis was conducted using SPSS 21.0 software. Independent sample t-tests was utilized to compare the duration of operation and and postoperative evaluation of facial appearance, the Chi-square tests was utilized for condyle position, commissure degrees among interactions involving fibular segments, prebent titanium plates, bone segments( P<0.05 denoted statistical significance). Results:A total of 30 patients were enrolled, comprising 17 males and 13 females, with a median age of 24 years (16-64 years). The preparation process of fibular flaps proceeded smoothly. The required length of fibula was measured as (14.1 ± 1.9) cm (5.7-18.1 cm), while the number of fibular segments ranged from 2 to 4, averaging at approximately 2.9 ± 0.6. The mandibular defects were repaired using a single-layer fibula in 12 cases, a vascularized folded fibula in 7 cases and a combination of vascularized and non-vascularized fibula in 11 cases. The operation time for the guide plate group was recorded as ( 335.9 ± 64.0) min (240-433 min), while it was observed to be (470.7 ± 140.5 ) min (280-680 min) for the non-guide plate group.The postoperative follow-up duration ranged from 9 to 23 months, with an average period of 11 months. All fibular flaps demonstrated clinical survival. The number of patients with good commissure degree between fibular and mandibular segments, between prebent titanium plate and fibular and mandibular segments and the position of condyle were 15, 15 and 13 cases in guide plate group, 10, 13 and 11 cases in non-guide plate group respectively. The statistical analysis revealed a significant difference ( P<0.05) in the degree of commissure between the fibular and the mandibular segments (15/15 vs. 10/15) in the two groups. Both groups exhibited high levels of satisfaction regarding their postoperative facial appearance at the 6 months follow-up, observed to be 9.6±0.5 and 9.3±0.5 respectively, and the statisticla analysis revealed non-significant difference ( P>0.05). Conclusion:The integration of virtual surgery with 3D printed guide plates can effectively reduce operative time and improve precision in the repair and reconstruction of free-fibular flaps following resection of benign tumors of the mandible.

Objective:To investigate the therapeutic effect of digital technology assisted design of fibula flap for the repair of maxillary tumor defect and implant denture.Methods:A retrospective analysis was performed in patients with benign maxillary tumors who were admitted to Department of Oral and Maxillofacial Surgery, the First Affiliated Hospital of Zhengzhou Universityfrom March 2018 to October 2020. Before the surgery, the virtual tumor resection, fibula reconstruction and stereomodels were printed for the fabrication of fibular osteotomy guide plates.And titanium plates were prefabricated with the stereomodels. Personalized titanium meshes were prebent manually. During the operation, the tumor was removed according to the osteotomy guide plate.The fibula was reshaped according to the surgical plan and the guide plate.And maxillary defects were reconstructed using the fibular flap combined with a prebent personalized titanium mesh.Straumann implants were implanted 6-9 months after bone grafting.The upper porcelain crown was repaired 3-4 months after implantation to restore the occlusal relationship and masticatory function. The facial appearance, masticatory function and peri-implant inflammation were followed up.Results:A total of 12 cases were included in this study, 7 males and 5 females, aged 20-55 years, with a median age 36 years old. Among them, there were 3 cases of ossifying fibroma, 7 cases of ameloblastoma, and 2 cases of odontogenic myxoma.According to the James Brown classification, there were 4 cases of Type Ⅱb, 3 cases of Type Ⅱc, 3 cases of Type Ⅱd, and 2 cases of Type Ⅲb. Tumor resection and fibula reconstruction went smoothly in 12 patients and all the free fibular flaps survived 14 days after surgery. The patients had maxillofacial symmetry, good occlusal relationship after the implant repair, and normal chewing and masticatory functions, after 12-48 months of follow-up, with an average of 26 months. The mouth opening reached 2.8-3.3 cm, without obvious peri-implantitis.Conclusion:The use of digital technology to design fibula flap to repair the defect after maxillary tumor resection and implant denture can not only restore the patients’ facial contour, but also restore their occlusal relationship and masticatory function.

Objective:To explore the function of MDM2 and its relationship with p53 at the cellular level during H 2O 2 induced oxidative damage. Methods:MLE-12 HALI cell models were established using 0.5 mmol/L H 2O 2, and were divided into three groups: normal control group, H 2O 2 injury group, H 2O 2+MDM2 overexpressed group, and H 2O 2+MDM2 shRNA group. Infection of MLE-12 cells with adenovirus vector overexpressing and silencing MDM2; Using immunoprecipitation (Co-IP) to analyze the interaction between MDM2 and p53; Western blotting was used to detect the protein expression levels of MDM2, p53, Bcl-2, Bax, and cleared caspase-3 after HALI modeling; Measure the apoptosis rate of cells in each group. Results:After transcriptome sequencing,the p53 signaling pathway closely related to HALI. Compared with the normal group, the expression of MDM2 in the H 2O 2 injury group was lower ( P<0.05); Compared with the H 2O 2 injury group, overexpression of MDM2 resulted in a decrease in the apoptosis rate of MLE-12 cells ( P<0.05), a decrease in the expression levels of p53, Bax, and cleared caspase-3 proteins, and an upregulation of MDM2 and Bcl-2 protein expression ( P<0.05). Compared with the H 2O 2 injury group, when MDM2 was silenced, the cell apoptosis rate increased ( P<0.05), and the expression levels of p53, Bax, and cleared caspase-3 proteins were upregulated, while the expression levels of MDM2 and Bcl-2 proteins decreased ( P<0.05). Co-IP experiments showed that MDM2 binds to p53 protein. Conclusions:MDM2 can exert a protective effect on HALI by inhibiting MLE-12 cell apoptosis through the p53/Bcl-2/Bax axis.

Arrhythmia, a common and frequently occurring cardiovascular disease, causes a heavy burden on the public health of China. Approximately 20 million patients are suffering from this disease in China and treated by pharmacological and surgical therapies. However, antiarrhythmic drugs can cause arrhythmia and surgical treatment has the risks of failure and recurrence. Therefore, the clinical outcome of arrhythmia remains to be improved. According to the traditional Chinese medicine(TCM) theory, arrhythmia is a disease of palpitation induced by 7 conditions: liver depression and Qi stagnation, accumulation of turbid phlegm, fluid retention attacking the heart, fire-heat disturbing the heart, stasis obstruction of heart vessel, cold congealing in heart vessel, and the deficiency of Qi, blood, Yin, and Yang. Therefore, this study concisely proposed 7 TCM syndromes of arrhythmia, including the palpitation due to depression, phlegm, fluid retention, fire, blood stasis, cold, and deficiency. The corresponding treatment strategies were recommended as follows: Chaihu Longgu Muli Decoction for the palpitation due to depression, Wendan Decoction for the palpitation due to phlegm, Linggui Zhugan Decoction for the palpitation due to fluid retention, Sanhuang Xiexin Decoction for the palpitation due to fire, Xuefu Zhuyu Decoction for the palpitation due to blood stasis, and Mahuang Fuzi Xixin Decoction for the palpitation due to cold, and Guizhi Gancao Decoction, Guizhi Gancao Longgu Muli Decoction, Huanglian Ejiao Decoction, Zhigancao Decoction, and Guipi Decoction for the palpitation due to the deficiency of Qi, blood, Yin, and Yang. Multiple formulas should be combined if the patient presents several TCM syndromes simultaneously. According to the principles of the correspondence between formula and syndrome and the treatment with consideration to both pathogenesis and pathology and both herbal nature and pharmacology, this study proposed an integrated treatment model of "pathogenesis-pathology-nature-pharmacology" to enhance the clinical efficacy of classic herbal formulas in the treatment of arrhythmia.
Humans ; Medicine, Chinese Traditional ; Syndrome ; Drugs, Chinese Herbal/therapeutic use* ; Heart Failure/drug therapy* ; Arrhythmias, Cardiac/drug therapy* ; China