The purpose of this study is to evaluate the accuracy of IMRT in our clinic from based on TG119 procedure and establish action level. Five IMRT test cases were described in TG119: multi-target, head&neck, prostate, and two C-shapes (easy&hard). There were used and delivered to water-equivalent solid phantom for IMRT. Absolute dose for points in target and OAR was measured by using an ion chamber (CC13, IBA). EBT2 film was utilized to compare the measured two-dimensional dose distribution with the calculated one by treatment planning system. All collected data were analyzed using the TG119 specifications to determine the confidence limit. The mean of relative error (%) between measured and calculated value was 1.2+/-1.1% and 1.2+/-0.7% for target and OAR, respectively. The resulting confidence limits were 3.4% and 2.6%. In EBT2 film dosimetry, the average percentage of points passing the gamma criteria (3%/3 mm) was 97.7+/-0.8%. Confidence limit values determined by EBT2 film analysis was 3.9%. This study has focused on IMRT commissioning and quality assurance based on TG119 guideline. It is concluded that action level were +/-4% and +/-3% for target and OAR and 97% for film measurement, respectively. It is expected that TG119-based procedure can be used as reference to evaluate the accuracy of IMRT for each institution.
Film Dosimetry ; Prostate

BACKGROUND: Ionizing radiation is a group 1 carcinogen according to the IARC(International Agency for Research on Cancer) classification. With the development of the radiation related industry, the number of radiation exposed workers has been increasing. There have been several reports on AML(Acute Myeloid Leukemia) on exposure to ionizing radiation; however, there are no reports of occupational malignant lymphohematopoietic disease related to non-destructive inspection. CASE REPORT 1: A 35-years-old male, who had worked for 10 years in non-destructive inspection, was diagnosed with myelodysplastic syndrome. He worked 8 hours a day, for three weeks per months, where he was exposed to 192Ir and 60Co radiation sources. Because he had not worn a film badge for monitoring his radiation exposure dose, the accurate exposure dose was not reported. The estimate exposure dose calculated via a chromosomal study was 1.20 Gy, which exceed the dose limits of Korean radiation dose standards, which are 50 and 100 mSv annually and quinquennially respectively. CASE REPORT 2: A 26-years-old male, who had worked for 2.5 years in the same company was also diagnosed with myelodysplastic syndrome. CONCLUSION: Non-destructive inspection is the main source of ionizing radiation in the workplace, which could be the cause of malignant lymphohematopoietic diseases. Therefore, more practical plans and guidelines are needed to prevent non-destructive inspectors from workplace radiation exposure.
Film Dosimetry ; Humans ; Leukemia ; Leukemia, Erythroblastic, Acute ; Male ; Myelodysplastic Syndromes ; Radiation, Ionizing

Less execution of the electron arc treatment could in large part be attributed to the lack of an adequate planning system. Unlike most linear accelerators providing the electron arc mode, no commercial planning systems for the electron arc plan are available at this time. In this work, with the expectation that an easily accessible planning system could promote electron arc therapy, a commercial planning system was commissioned and evaluated for the electron arc plan. For the electron arc plan with use of a Varian 21-EX, Pinnacle3 (ver. 7.4f), with an electron pencil beam algorithm, was commissioned in which the arc consisted of multiple static fields with a fixed beam opening. Film dosimetry and point measurements were executed for the evaluation of the computation. Beam modeling was not satisfactory with the calculation of lateral profiles. Contrary to good agreement within 1% of the calculated and measured depth profiles, the calculated lateral profiles showed underestimation compared with measurements, such that the distance-to-agreement (DTA) was 5.1 mm at a 50% dose level for 6 MeV and 6.7 mm for 12 MeV with similar results for the measured depths. Point and film measurements for the humanoid phantom revealed that the delivered dose was more than the calculation by approximately 10%. The electron arc plan, based on the pencil beam algorithm, provides qualitative information for the dose distribution. Dose verification before the treatment should be mandatory.
Electrons ; Film Dosimetry ; Particle Accelerators

This study examined the dosimetric influence of implanted gold markers in proton therapy and the effects of their positions in the spread-out Bragg peak (SOBP) proton beam. The implanted cylindrical gold markers were 3 mm long and 1.2 mm in diameter. The dosimetric influence of the gold markers was determined with markers at various locations in a proton-beam field. Spatial dose distributions were measured using a three-dimensional moving water phantom and a stereotactic diode detector with an effective diameter of 0.5 mm. Also, a film dosimetry was performed using Gafchromic External Beam Treatment (EBT) film. The GEANT4 simulation toolkit was used for Monte-Carlo simulations to confirm the measurements and to construct the dose-volume histogram with implanting markers. Motion data were obtained from the portal images of 10 patients to investigate the effect of organ motions on the dosimetric influence of markers in the presence of a rectal balloon. The underdosed volume due to a single gold marker, in which the dose was less than 95% of a prescribed amount, was 0.15 cc. The underdosed volume due to the presence of a gold marker is much smaller than the target volume. However, the underdosed volume is inside the gross tumor volume and is not smeared out due to translational prostate motions. The positions of gold markers and the conditions of the proton-beam field give different impacts on the dose distribution of a target with implanted gold markers, and should be considered in all clinical proton-based therapies.
Film Dosimetry ; Humans ; Prostate ; Prostatic Neoplasms ; Proton Therapy ; Protons ; Tumor Burden ; Water

Most brachytherapy treatment planning systems employ a dosimetry formalism based on the AAPM TG-43 report which does not appropriately consider tissue heterogeneity. In this study we aimed to set up a simple Monte Carlo-based intracavitary high-dose-rate brachytherapy (IC-HDRB) plan verification platform, focusing particularly on the robustness of the direct Monte Carlo dose calculation using material and density information derived from CT images. CT images of slab phantoms and a uterine cervical cancer patient were used for brachytherapy plans based on the Plato (Nucletron, Netherlands) brachytherapy planning system. Monte Carlo simulations were implemented using the parameters from the Plato system and compared with the EBT film dosimetry and conventional dose computations. EGSnrc based DOSXYZnrc code was used for Monte Carlo simulations. Each (192)Ir source of the afterloader was approximately modeled as a parallel-piped shape inside the converted CT data set whose voxel size was 2x2x2 mm3. Bracytherapy dose calculations based on the TG-43 showed good agreement with the Monte Carlo results in a homogeneous media whose density was close to water, but there were significant errors in high-density materials. For a patient case, A and B point dose differences were less than 3%, while the mean dose discrepancy was as much as 5%. Conventional dose computation methods might underdose the targets by not accounting for the effects of high-density materials. The proposed platform was shown to be feasible and to have good dose calculation accuracy. One should be careful when confirming the plan using a conventional brachytherapy dose computation method, and moreover, an independent dose verification system as developed in this study might be helpful.
Accounting ; Brachytherapy ; Film Dosimetry ; Humans ; Monte Carlo Method ; Organoplatinum Compounds ; Population Characteristics ; Uterine Cervical Neoplasms ; Water

Software for GafChromic EBT2 film dosimetry was developed in this study. The software provides film calibration functions based on color channels, which are categorized depending on the colors red, green, blue, and gray. Evaluations of the correction effects for light scattering of a flat-bed scanner and thickness differences of the active layer are available. Dosimetric results from EBT2 films can be compared with those from the treatment planning system ECLIPSE or the two-dimensional ionization chamber array MatriXX. Dose verification using EBT2 films is implemented by carrying out the following procedures: file import, noise filtering, background correction and active layer correction, dose calculation, and evaluation. The relative and absolute background corrections are selectively applied. The calibration results and fitting equation for the sensitometric curve are exported to files. After two different types of dose matrixes are aligned through the interpolation of spatial pixel spacing, interactive translation, and rotation, profiles and isodose curves are compared. In addition, the gamma index and gamma histogram are analyzed according to the determined criteria of distance-to-agreement and dose difference. The performance evaluations were achieved by dose verification in the 60o-enhanced dynamic wedged field and intensity-modulated (IM) beams for prostate cancer. All pass ratios for the two types of tests showed more than 99% in the evaluation, and a gamma histogram with 3 mm and 3% criteria was used. The software was developed for use in routine periodic quality assurance and complex IM beam verification. It can also be used as a dedicated radiochromic film software tool for analyzing dose distribution.
Calibration ; Film Dosimetry ; Lifting ; Light ; Noise ; Prostatic Neoplasms ; Software

The compatibility with GammaMed-12i brachytherapy machine for an Ir-192 encapsulated source (IRRS20, KAERI, Korea) manufactured by Korea atomic energy research institute (KAERI) has been investigated. As a mechanical testing of compatibility, precise measurement of step movement with channels, measurement of curvature of radius for wire, and emergency return testing were performed. Periodic measurements of air kerma strength for 45 days were carried out to evaluate decay characteristics of Ir-192 radioisotope and comparison of dose distributions in phantom between KAERI and old sources previously used were performed by film dosimetry. KAERI source has a good compatibility with GammaMed12i machine as a result of mechanical testing. There are in good agreement with calculated values in activity characteristics and there were small differences in dose distributions around the source in comparison between KAERI and old source.
Academies and Institutes ; Brachytherapy ; Emergencies ; Film Dosimetry ; Korea ; Nuclear Energy ; Radius

OBJECTIVETo propose a new computer software-based medical image processing technique with high resolution digital scanner for radiotherapy verification.

METHODSUnder the platform of Windows 2000, the software, programmed with Visual C++.NET, was developed according to modular design. All data of the films and the treatment planning system could be processed as images or dose curves for a robust result.

RESULTSMany functions such as data acquisition, automatic analysis and computation and image processing were integrated in the system. Both geometric and dosimetric errors could be calculated at the same time to verify the radiotherapy accuracy.

CONCLUSIONThis system has good accuracy and stability for cost-effective radiotherapy verification.

Film Dosimetry ; instrumentation ; Humans ; Image Processing, Computer-Assisted ; Radiotherapy Dosage ; standards ; Radiotherapy Planning, Computer-Assisted ; methods ; Reproducibility of Results ; Software

The purpose of this study is to develop the optimization method for adjusting the film isocenter shift and to suggest the quantitative acceptable criteria for film dosimetry after optimization in the dynamic conformal arc radiation therapy (DCAR). The DCAR planning was performed in 7 patients with brain metastasis. Both absolute dosimetry with ion chamber and relative film dosimetry were performed throughout the DCAR using BrainLab's micro-multileaf collimator. An optimization method for obtaining the global minimum was used to adjust for the error in the film isocenter shift, which is the largest part of systemic errors. The mean of point dose difference between measured value using ion chamber and calculated value acquired from planning system was 0.51+/-0.43% and maximum was 1.14% with absolute dosimetry. These results were within the AAPM criteria of below 5%. The translation values of film isocenter shift with optimization were within +/-1 mm in all patients. The mean of average dose difference before and after optimization was 1.70+/-0.36% and 1.34+/-0.20%, respectively, and the mean ratios over 5% dose difference was 4.54+/-3.94% and 0.11+/-0.12%, respectively. After optimization, the dose differences decreased dramatically and a ratio over 5% dose difference and average dose difference was less than 2%. This optimization method is effective in adjusting the error of the film isocenter shift, which is the largest part of systemic errors, and the results of this research suggested the quantitative acceptable criteria could be accurate and useful in clinical application of dosimetric verification using film dosimetry as follows; film isocenter shift with optimization should be within +/-1 mm, and a ratio over 5% dose difference and average dose difference were less than 2%.
Brain ; Film Dosimetry ; Humans ; Neoplasm Metastasis ; Radiotherapy*

In this study, we investigated the effect of time gating threshold on the delivered dose at a organ with internal motion by respiration. Generally, the internal organs have minimum motion at exhalation during normal breathing. Therefore to compare the dose distribution time gating threshold, in this paper, was determined as the moving region of target during 1 sec at the initial position of exhalation. The irradiated fields were then delivered under three conditions; 1) non-moving target 2) existence of the moving target in the region of threshold (1sec), 3) existence of the moving target region out of threshold (1.4 sec, 2 sec). And each of conditions was described by the moving phantom system. It was compared with the dose distributions of three conditions using film dosimetry. Although the treatment time increased when the dose distributions was obtained by the internal motion to consider the TGT, it could be obtained more exact dose distribution than in the treatment field that didn't consider the internal motion. And it could be reduced the unnecessary dose at the penumbra region. When we set up 1.4 sec of threshold, to reduce the treatment time, it could not be obtained less effective dose distribution than 1 sec of threshold. Namely, although the treatment time reduce, the much dose was distributed out of the treatment region. Actually when it is treated the moving organ, it would rather measure internal motion and external motion of the moving organ than mathematical method. If it could be analyzed the correlation of the internal and external motion, the treatment scores would be improved.
Exhalation ; Film Dosimetry ; Respiration*