Annexin A3（ANXA3）is a member of the membrane associated protein family. It has two subtypes of 36 kDa and 33 kDa. Its gene is located on the fourth chromosome of human. ANXA3, widely expressed in human bone marrow, lung, placenta, prostate and thyroid, is closely related to several biological processes such as exoplasmosis, vascular production, fat cell maturity, and white blood cell migration. Studies have found that ANXA3 is abnormally expressed in various diseases including cancer, cardiovascular disease and inflammation. It can regulate multiple signaling pathways such as JNK, NF-κB, PI3K/AKT, and may become a potential drug target for treatment of related diseases. The structure, functions, the link with diseases and related mechanisms of ANXA3 were summarized in this paper, which could provide reference for ANXA3 related research.

Pneumonia is an infectious disease with high morbidity and mortality worldwide， and its damage to the body is not limited to the acute phase. The theory of combination of pathogenic factors emphasizes that the combination of new pathogens and residual pathogens in the body leads to the occurrence of diseases， which generalizes the causes of recurrence during pneumonia recovery. During the recovery stage of pneumonia， pathological changes such as disturbance of immune homeostasis， persistent low-grade inflammation， and microvascular damage continue to affect the body function， impair the health and quality of life of patients， and increase the risk of secondary infection. According to the theory of traditional Chinese medicine （TCM）， pneumonia is caused by deficiency， and Qi deficiency and blood stasis is the core pathogenesis in the recovery stage. At this time， the body is not full of healthy qi and still has residual pathogens， and thus it is susceptible to external pathogenic factors that lead to disease recurrence. As an important part of the TCM philosophy of treating disease before its onset， prevention of recurrence after recovery emphasizes the need for aftercare in the recovery stage to prevent disease recurrence. Based on the pathogenesis theory of combination of pathogenic factors and the pathogenesis of Qi deficiency and blood stasis， this paper discusses the effect and connotation of TCM in regulating immune inflammation and microvascular damage in preventing recurrence of pneumonia during the recovery stage， aiming to develop new ideas for effective prevention and treatment of pneumonia at this stage.

Objective To analyze the urban drinking water quality and its influencing factors in Anhui Province from 2014 to 2022, and to provide a scientific basis for water quality improvement and protection. Methods The data were collected, saved and monitored according to the Standard Test Method for Drinking Water (GB/T5750-2006) and evaluated according to the Hygienic Standard for Drinking Water (GB 5749-2006). Results A total of 20 941 samples were collected, and the overall qualified rate was 84.26%. The qualified rate of urban drinking water increased from 76.9% in 2014 to 93.3% in 2022, and the qualified rate of water quality was on the rise (χ²=544.43, P＜0.01). From 2014 to 2022, the qualified rate of water quality in dry season was higher than that in wet season (χ²=35.98, P<0.001), the qualified rate of surface water was higher than that of ground water (χ²=4440.8, P<0.001), and the qualified rate of peripheral tap water was higher than that of factory water (χ²=145.1, P<0.001). Among all kinds of disinfection methods, chlorination disinfection had the highest qualified rate (χ²=1483.8, P<0.001). The qualified rate of water quality increased with the increase of the scale of water plant. Among the inspected indicators, the main unqualified indicators were chlorine dioxide (7.72%), fluoride (7.41%), free residual chlorine (3.90%), and total bacterial count (2.13%). Conclusion The passing rate of urban drinking water quality in Anhui Province is on an upward trend, and the quality of urban drinking water has improved. However, it is still important to pay attention to the problem of excessive microorganism and fluoride in water, and the quality of drinking water varies from place to place.

ObjectiveTo investigate the preventive effect and mechanism of Dendrobium officinale （DO） on non-alcoholic fatty liver disease （NAFLD） by network pharmacology and animal experiments. MethodsDO components in blood after administration were identified and analyzed using ultra-performance liquid chromatography-quadrupole-electrostatic field orbitrap high-resolution mass spectrometry （UPLC-QE-HF-MS/MS）. Network pharmacology and molecular docking methods were employed to obtain active ingredients and potential targets of DO for NAFLD control. High-fat feeds were used to replicate the NAFLD rat model. Biochemical kits were used for detecting the expression levels of blood lipids， hepatic lipids， and liver functions of rats. Hematoxylin-eosin （HE） staining and oil red O staining were employed to observe pathological changes in rat liver， and real-time fluorescence quantitative PCR （Real-time PCR） assay was performed to validate potential targets obtained from the network pharmacology analysis. ResultsA total of 13 DO components were identified in blood， including berberine， dihydrosanguinarine， and oxypeucedanin. A total of 14 potential targets were screened through network pharmacology， including Forkhead box protein O1 （FoxO1）， epidermal growth factor receptor （EGFR）， and insulin-like growth factor 1 （IGF-1R）， involving pathways such as the advanced glycation end product （AGE）/receptor for AGE （RAGE） signaling pathway， blood lipids and atherosclerosis， insulin resistance， and FoxO signaling. The results of animal experiments showed that the NAFLD rat model was successfully replicated. After the preventive treatment with DO for NAFLD rats， the indexes of blood lipids， hepatic lipids， and liver function were normalized； lipid deposition and lesions in the liver were significantly improved； the expression level of FoxO1 mRNA in the liver was significantly reduced （P<0.05）， and the mRNA expression levels of phosphatidylinositide 3-kinases （PI3K）， protein kinase B （Akt）， EGFR， and IGF-1R were significantly increased （P<0.05）. ConclusionDO has a preventive effect on NAFLD rats， and the mechanism of action may be related to the modulation of IGF1R and EGFR targets and activation of the PI3K/Akt/FoxO1 signaling pathway.

BACKGROUND:Cervical rotation-traction manipulation is effective and safe in the treatment of cervical spondylotic radiculopathy,and has been widely used in clinical work.However,its effects on the biomechanics of cervical vertebra and intervertebral disc and the area of intervertebral foramen have not been systematically clarified. OBJECTIVE:Based on the finite element analysis technique,a relevant research and analysis were carried out to provide digital evidence for the mechanism of effect of cervical rotation-traction manipulation in the treatment of cervical spondylotic radiculopathy. METHODS:The CT image data of a volunteer with no neck diseases were selected as the finite element model material at its left-handed physiological limit position.The initial construction of the finite element model was completed by Mimics 19.0 software,Geomagic Studio 2013 software,Hypermash 14.0 software,and ANSYS Workbench 2020 R2 software,respectively.Based on the literature,the grid division of cervical structure and the assignment of elastic modulus and elastic coefficient were completed.Based on the previous work of the team,the mechanical effects of cervical rotation-traction manipulation were simulated on the model.Effects of cervical rotation-traction manipulation on the mechanical parameters of each vertebral body and intervertebral disc in C3-T1 segment and on the cervical lateral foramen area were analyzed. RESULTS AND CONCLUSION:(1)During cervical rotation-traction manipulation,the stress of bone structure was significantly higher than that of soft tissue such as intervertebral disc.(2)When operating the technique,the stress at the top of each cervical vertebra was higher,the stress at the bottom was lower,and the stress at the facet joint and transverse process was lower.The stress at the top of the intervertebral disc was lower,the stress at the bottom was higher,but the highest point of the intervertebral disc stress was outside the top.(3)In addition,after loading the lifting force,the projected area of the C6/C7 intervertebral foramen increased significantly compared with that before loading.(4)It is indicated that the cervical rotation-traction manipulation has the mechanical characteristics of changing the stress structure of the cervical spine itself,and can expand the C6/7 intervertebral cervical foramen area on the opposite side of the patient's cervical rotation,so as to achieve the purpose of treating cervical spondylotic radiculopathy.

BACKGROUND:Cervical disc herniation can cause pain in the neck and shoulder area,as well as radiating pain in the upper limbs.The incidence rate is increasing year by year and tends to affect younger individuals.Fully understanding the biomechanical characteristics of the cervical spine in adolescents is of great significance for preventing and delaying the onset of cervical disc herniation in this age group. OBJECTIVE:To reconstruct cervical spine models for both healthy adolescents and adolescent patients with cervical disc herniation utilizing finite element analysis techniques,to analyze the motion range of the C1-T1 cervical vertebrae as well as the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and the cartilage of the small joints. METHODS:A normal adolescent's cervical spine and an adolescent patient with cervical disc herniation were selected in this study.The continuous scan cervical spine CT raw image data were imported into Mimics 21.0 in DICOM format.The C1-T1 vertebrae were reconstructed separately.Subsequently,the established models were imported into the 3-Matic software for disc reconstruction.The perfected models were then imported into Hypermesh software for meshing of the vertebrae,nucleus pulposus,annulus fibrosus,and ligaments,creating valid geometric models.After assigning material properties,the final models were imported into ABAQUS software to observe the joint motion range of the C1-C7 cervical vertebrae segments under different conditions,and to analyze the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and small joint cartilage of each cervical spine segment. RESULTS AND CONCLUSION:(1)In six different conditions,the joint motion range of the C1 vertebra in the cervical spine models of both normal adolescent and adolescent patient with cervical disc herniation was higher than that of the other vertebrae.Additionally,the joint motion range of each cervical spine segment in normal adolescent was greater than that in adolescent patient with cervical disc herniation.(2)In the cervical spine model of normal adolescent,the maximum stress values in the annulus fibrosus and nucleus pulposus were found on the left side during C2-3 flexion conditions(0.43 MPa and 0.17 MPa,respectively).In the cervical spine model of adolescent patient with cervical disc herniation,the maximum stress values were found on the left side during C7-T1 flexion conditions(0.54 MPa and 0.18 MPa,respectively).(3)In the cervical spine model of normal adolescent,the maximum stress value on the endplate was found on the left side of the upper endplate of C3 during flexion conditions(1.46 MPa).In the model of adolescent patient with cervical disc herniation,the maximum stress value on the endplate was found on the left side of the lower endplate of C7 during flexion conditions(1.32 MPa).(4)In the cervical spine model of normal adolescent,the maximum stress value in the small joint cartilage was found in the C2-3 left rotation conditions(0.98 MPa).In adolescent patient with cervical disc herniation,the stress in the small joint cartilage significantly increased under different conditions,especially in C1-2,with the maximum stress found during left flexion(3.50 MPa).(5)It is concluded that compared to normal adolescent,adolescent patient with cervical disc herniation exhibits altered cervical curvature and a decrease in overall joint motion range in the cervical spine.In adolescent with cervical disc herniation,there is a significant increase in stress on the annulus fibrosus,nucleus pulposus,and endplates in the C7-T1 segment.The stress on the left articular cartilage of the C1-2 is notable.Abnormal cervical curvature may be the primary factor causing these stress changes.

BACKGROUND:Gradient artificial bone repair scaffolds can mimic unique anatomical features in musculoskeletal tissues,showing great potential for repairing injured musculoskeletal tissues. OBJECTIVE:To review the latest research advances in gradient artificial bone repair scaffolds for tissue engineering in the musculoskeletal system and describe their advantages and fabrication strategies. METHODS:The first author of the article searched the Web of Science and PubMed databases for articles published from 2000 to 2023 with search terms"gradient,bone regeneration,scaffold".Finally,76 papers were analyzed and summarized after the screening. RESULTS AND CONCLUSION:(1)As an important means of efficient and high-quality repair of skeletal system tissues,gradient artificial bone repair scaffolds are currently designed bionically for the natural gradient characteristics of bone tissue,bone-cartilage,and tendon-bone tissue.These scaffolds can mimic the extracellular matrix of native tissues to a certain extent in terms of structure and composition,thus promoting cell adhesion,migration,proliferation,differentiation,and regenerative recovery of damaged tissues to their native state.(2)Advanced manufacturing technology provides more possibilities for gradient artificial bone repair scaffold preparation:Gradient electrospun fiber scaffolds constructed by spatially differentiated fiber arrangement and loading of biologically active substances have been developed;gradient 3D printed scaffolds fabricated by layered stacking,graded porosity,and bio-3D printing technology;gradient hydrogel scaffolds fabricated by in-situ layered injections,simple layer-by-layer stacking,and freeze-drying method;and in addition,there are also scaffolds made by other modalities or multi-method coupling.These scaffolds have demonstrated good biocompatibility in vitro experiments,were able to accelerate tissue regeneration in small animal tests,and were observed to have significantly improved histological structure.(3)The currently developed gradient artificial bone repair scaffolds have problems such as mismatch of gradient scales,unclear material-tissue interactions,and side effects caused by degradation products,which need to be further optimized by combining the strengths of related disciplines and clinical needs in the future.

Currently, the drug delivery system (DDS) based on nanomaterials has become a hot interdisciplinary research topic. One of the core issues is drug loading and controlled release, in which the key lever is carriers. Vaterite, as an inorganic porous nano-material, is one metastable structure of calcium carbonate, full of micro or nano porous. Recently, vaterite has attracted more and more attention, due to its significant advantages, such as rich resources, easy preparations, low cost, simple loading procedures, good biocompatibility and many other good points. Vaterite, gained from suitable preparation strategies, can not only possess the good drug carrying performance, like high loading capacity and stable loading efficiency, but also improve the drug release ability, showing the better drug delivery effects, such as targeting release, pH sensitive release, photothermal controlled release, magnetic assistant release, optothermal controlled release. At the same time, the vaterite carriers, with good safety itself, can protect proteins, enzymes, or other drugs from degradation or inactivation, help imaging or visualization with loading fluorescent drugs in vitro and in vivo, and play synergistic effects with other therapy approaches, like photodynamic therapy, sonodynamic therapy, and thermochemotherapy. Latterly, some renewed reports in drug loading and controlled release have led to their widespread applications in diverse fields, from cell level to clinical studies. This review introduces the basic characteristics of vaterite and briefly summarizes its research history, followed by synthesis strategies. We subsequently highlight recent developments in drug loading and controlled release, with an emphasis on the advantages, quantity capacity, and comparations. Furthermore, new opportunities for using vaterite in cell level and animal level are detailed. Finally, the possible problems and development trends are discussed.

ObjectiveTo investigate the effects of Ningxin Shugan decoction combined with an antagonist fixation regimen on in vitro fertilization and embryo transfer （IVF-ET） outcomes and serum kisspeptin expression in infertility patients with polycystic ovary syndrome. MethodsA total of 96 infertile patients with polycystic ovary syndrome treated in Yancheng No.1 People's Hospital and Yancheng Affiliated Hospital of Nanjing University of Chinese Medicine were enrolled in this study and randomized into control and observation groups （n=48）. The control group was treated with an antagonist fixation regimen， and the observation group was treated with Ningxin Shugan decoction on the basis of the treatment in the control group. The clinical efficacy was compared between the two groups. The total score and single scores of TCM symptoms， ovulation promotion status， and serum levels of reproductive hormones， miR-335-5p， miR-141-3p， and kisspeptin were determined before and after treatment. The IVF-ET outcome indicators and treatment safety were evaluated. Pearson test was conducted to analyze the correlations of serum levels of follicle-stimulating hormone （FSH）， kisspeptin， miR-335-5p， and miR-141-3p with IVF-ET outcomes. ResultsThe total response rate in the observation group was 90.91%， which was higher than that （70.45%） in the control group （P<0.05）. The total score and single scores of TCM symptoms and the testosterone， luteinizing hormone （LH）， and LH/FSH levels declined after treatment （P<0.05）， and they were lower in the observation group than in the control group （P<0.05）. After treatment， the serum levels of FSH， kisspeptin， miR-335-5p， and miR-141-3p rose in both groups， being higher in the observation group than in the control group （P<0.05）. The observation group showed higher ovulation number， number of MⅡ oocytes， embryo implantation rate， clinical pregnancy rate， and live birth rate than the control group （P<0.05， P<0.01）. Serum levels of FSH， kisspeptin， miR-335-5p， and miR-141-3p were positively correlated with embryo implantation rate， clinical pregnancy rate， and live birth rate （P<0.01）. ConclusionNingxin Shugan decoction combined with the antagonist fixation regimen can improve the IVF-ET outcome， promote the serum kisspeptin expression， and increase the ovulation rate and pregnancy rate in infertility patients with polycystic ovary syndrome.

ObjectiveBased on ultra-high performance liquid chromatography-quadrupole-electrostatic field orbital trap-linear ion-trap mass spectrometry（UPLC-Orbitrap Fusion Lumos Tribrid-MS）， the plasma concentration of ziyuglycoside Ⅰ was determined at different time points after oral administration， and its pharmacokinetic characteristics in normal rats and rats with acute kidney injury were compared. MethodsRats were randomly divided into normal group and model group， the model group received intraperitoneal cisplatin（10 mg·kg^-1） to establish the acute kidney injury model， the normal group was given the same volume of saline. After successful modeling， rats in the normal and model groups were randomly divided into the normal low， medium and high dose groups（2.5， 5， 7.5 mg·kg^-1） and the model low， medium and high dose groups（2.5， 5， 7.5 mg·kg^-1）， 6 rats in each group， and the plasma was collected at different time points after receiving the corresponding dose of ziyuglycoside Ⅰ. Then， the concentration of ziyuglycoside Ⅰ in rat plasma was determined by UPLC-Orbitrap Fusion Lumos Tribrid-MS， and the drug-time curve was poltted. The pharmacokinetic parameters were calculated by Kinetica 5.1 software， and the differences in pharmacokinetic parameters between different administration groups were compared by independent sample t-test with SPSS 22.0. ResultsThe pharmacokinetic results showed that after receiving the different doses of ziyuglycoside Ⅰ， its concentration increased first and then decreased， and all of them reached the maximum plasma concentration at about 0.5 h. The area under the curve（AUC_0-t） and mean retention time（MRT_0-t） of normal and model rats increased with the increased dose， and the clearance（CL） decreased with the increasing dose. Compared with the normal group， the AUC_0-t was significantly increased（P<0.01）， peak concentration（C_max） and CL decreased in model rats at different doses， indicating that the physiological state of the rats could affect the absorption and elimination of ziyuglycoside Ⅰ in vivo. ConclusionThe pharmacokinetic characteristics of ziyuglycoside Ⅰ are quite different in normal rats and acute kidney injury model rats， which may be due to the change of the body environment in the pathological state， then lead to changes in absorption and metabolic processes.