[Objective] To explore the influencing factors of quality monitoring index on the nucleic acid pooling detection mode and continuously improve the detection quality of nucleic acid laboratory. [Methods] The quality monitoring indicators (NAT reactive rate, NAT resolution reactive rate, NAT invalid batch rate, NAT invalid result rate, equipment failure rate) and causes of invalidity in our laboratory from January 1, 2020 to December 31, 2022 were retrospectively analyzed. The quality monitoring indicators of the laboratory during 2020 to 2022 were compared longitudinally. The quality monitoring indicators of the laboratory in 2022 were compared horizontally with the overall level in Shandong for the same period to find the differences. [Results] From 2020 to 2022, a total of 218 686 samples were detected, the NAT reactive rate was 0.15‰ (32 samples in total), the resolution reactive rate was 39.02%, the invalid batch rate was 1.06%, the invalid result rate was 1.18%, and the equipment failure rate was 3.58%. There were no differences in the NAT reactive rate, NAT resolution reactive rate and NAT invalid batch rate among different years (P>0.05), but there were differences in the invalid result rate (P<0.05). Equipment failure was the main cause of invalid results (56.53%). Compared with other laboratories in Shandong, there were differences in the NAT reactive rate and invalid result rate (P<0.05). There were differences in the reaction rate, resolution rate and invalid result rate among different reagents (P<0.05). Compared with other two laboratories using the same manufacturer's reagent, there were differences in the reactive rate and invalid result rate (P<0.05), but no difference in the resolution rate and invalid batch rate (P>0.05). [Conclusion] Establishing quality indexes for process control and regular analysis can timely detect potential risks in laboratory operation. The use of quality indicators to implement self-comparison and inter-laboratory comparison can help the laboratory systematically and scientifically evaluate its own operating status and formulate corresponding quality management strategies, thereby improving the laboratory's testing capacity and ensure the safety of blood use.

Objective: To determine the clinical efficacy of platelet-rich plasma (PRP) injection combined with warm acupuncture and moxibustion for treating patients with knee osteoarthritis and cold dampness obstruction syndrome. Methods: One hundred and twenty-eight patients with knee osteoarthritis and cold dampness obstruction syndrome who visited the Rehabilitation Department and Orthopedics Department of the Second Affiliated Hospital of Anhui University of Chinese Medicine from January 2023 to March 2024 and who met the inclusion and exclusion criteria were randomly divided into an experimental (n=64) and control group (n=64) using the random number table method. The experimental group was treated with PRP injection combined with warm acupuncture and moxibustion, whereas the control group was treated with normal saline injection combined with warm acupuncture and moxibustion treatment. PRP and normal saline injections were administered once every two weeks, a total of four times. Patients were treated with warm acupuncture and moxibustion once a day, six times a week, for four consecutive weeks. The Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), Traditional Chinese Medicine (TCM) syndrome, visual analog scale (VAS), and Lysholm scores were determined before treatment, at week 4 and week 8 of treatment, and week 16 of follow-up. Serum interleukin-6 (IL-6), matrix metalloproteinase-3 (MMP-3), tumor necrosis factor-α (TNF-α), osteoprotegerin (OPG), bone gla protein(BGP), and cartilage oligomeric matrix protein (COMP) levels were compared between the two groups before and after 8 weeks of treatment. The clinical efficacy and safety indicators between the two groups were also compared. Results: There was no statistical difference in baseline data such as gender, age, disease duration, and body mass index between the two groups of patients. Compared with before treatment, both groups showed decreased WOMAC total and subscale, TCM syndrome total score and symptom scores, and VAS scores, and an increase in Lysholm scores at 4, 8, and 16 weeks after treatment. After treatment, serum IL-6, MMP-3, TNF-α, and COMP levels decreased, whereas serum OPG and BGP levels increased (P<0.05). Compared with the control group, patients in the experimental group showed decreased WOMAC total and subscale, TCM syndrome total score and symptom scores, and VAS scores, and an increase in Lysholm score at 4, 8, and 16 weeks after treatment. Compared with the control group, patients in the experimental group showed decreased serum IL-6, MMP-3, TNF-α, and COMP levels and an increase in serum OPG and BPG levels after treatment (P<0.05). The total effective rate of the experimental group was 91.94%, higher than that of the control group (81.97%; P<0.05). Conclusion PRP injection combined with warm acupuncture and moxibustion can improve various TCM symptoms, improve knee joint function and bone metabolism, and reduce inflammation in patients with knee osteoarthritis and cold dampness obstruction syndrome.

Objective: To investigate the epidemiological characteristics of human brucellosis in Jiande City, Zhejiang Province from 2005 to 2024, so as to provide the evidence for strengthening the prevention and control of brucellosis. Methods: Data on brucellosis cases and surveillance in Jiande City from 2005 to 2024 were collected through the Chinese Disease Prevention and Control Information System, the annual brucellosis surveillance reports from the Jiande Center for Disease Control and Prevention, and the annual summaries of brucellosis prevention and control efforts. The epidemiological characteristics of human brucellosis were analyzed using a descriptive epidemiological method. Results: A total of 1 125 individuals were monitored in Jiande City from 2005 to 2024, with 18 seropositive cases identified and the seropositivity rate of 1.60%. The average annual seropositivity rate from 2015 to 2024 was 3.35%, which was significantly higher than that of 0.57% from 2005 to 2014 (P<0.05). There were 10 confirmed brucellosis cases and 8 asymptomatic infections, with no reported deaths. The peak incidence occurred between March and August. Among the 16 towns (streets) in Jiande City, 8 reported brucellosis cases. Of the brucellosis cases, 14 were male and 4 were female, with a male-to-female ratio of 3.5∶1. The majority of cases (13 cases) were aged between 40 and 60 years. Occupational exposure was identified in 16 cases, all of whom were infected through direct hand contact with the excreta, secretions, or animal products of infected sheep or cattle. The primary source of infection was sheep, followed by cattle. Five strains of Brucella were isolated and cultured, all identified as Brucella melitensis biovar 3. Conclusions The brucellosis epidemic in Jiande City remained at a sporadic and low prevalence level from 2005 to 2024, with an increasing trend observed from 2015 to 2024. Male occupational groups aged 40 to 60 years were the key population for brucellosis prevention and control, and sheep were the primary source of infection.

In view of the few studies on the influence of Armillaria spp. infection on the content of the chemical components in different parts of Polyporus umbellatus sclerotia, this study determined the biomass of P. umbellatus sclerotia and the contents of ergosterol, polyporusterone A, polyporusterone B and polysaccharide in the separated cavity wall of the sclerotia and the uninfected part of the sclerotia in different harvesting years under the conditions of A. gallica and A. mellea infection respectively. According to the difference of content and dynamic changes of the polysaccharide and the steroid substances, the superior Armillaria sp. was screened to obtain the best harvest years of P. umbellatus. Using HPLC and UV-VIS spectrophotometry methods, the contents of ergosterol, polyporusterone A, polyporusterone B and polysaccharide in P. umbellatus sclerotia infected by the two Armillaria spp. in different years were determined. In addition, the differentially expressed genes related to P. umbellatus polysaccharide synthesis were screened according to the transcriptomic data of different parts of P. umbellatus after A. mellea infection. With the increase of years, the biomass of sclerotia infected by different Armillaria spp. had significant differences, and there were significant differences in the four components of sclerotia. The four components of the separated cavity wall of the sclerotia were significantly higher than those of the uninfected part. The best harvest time was the third year after cultivation. Transcriptomic analysis showed that the infection of Armillaria spp. could significantly promote polysaccharide synthesis, which provided a basis for polysaccharide content determination at the molecular level. The study clarified the influence of different Armillaria spp. infection on the accumulation of chemical components of P. umbellatus sclerotia, laying a foundation for exploring the symbiosis mechanism and provided a scientific clue for screening superior Armillaria sp. and guiding the artificial cultivation of P. umbellatus sclerotia.

Xanthine oxidase (XO) is an important therapeutic target for the treatment of hyperuricemia and gout. Based on the previously identified potent XO inhibitor 1, seventeen oxadiazoles and their ring-opening analogues were designed and synthesized via the bioisostere replacement strategy. Among them, compounds 2l, 2n, and 3b showed obvious XO inhibitory activity at the concentration of 10 μmol·L^-1, and compound 3b exhibited an IC₅₀ value of 1.45 μmol·L^-1.

Objective: To analyze the change trends in the body shape indicators and proportions of students in Harbin from 2010 to 2024, and to investigate ergonomic compatibility of functional dimensions of school desks and chairs with current student shape indicators, so as to provide a reference for revising furniture standards of desks and chairs. Methods: Between September and November of both 2010 and 2024, a combination of convenience sampling and stratified cluster random sampling was conducted across three districts in Harbin, yielding samples of 6 590 and 6 252 students, respectively. Anthropometric shape indicators cluding height, sitting height, crus length, and thigh length-and their proportional changes were compared over the 15-year period. The 2024 data were compared with current standard functional dimensions of school furniture. The statistical analysis incorporated t-test and Mann-Whitney U- test. Results: From 2010 to 2024, average height increased by 1.8 cm for boys and 1.5 cm for girls; sitting height increased by 1.5 cm for both genders; crus length increased by 0.3 cm for boys and 0.4 cm for girls; and thigh length increased by 0.5 cm for both genders. The ratios of sitting height to height, and sitting height to leg length increased by less than 0.1 . The difference between desk chair height and 1/3 sitting height ranged from 0.4-0.8 cm. Among students matched with size 0 desks and chairs, 22.0% had a desk to chair height difference less than 0, indicating that the desk to chair height difference might be insufficient for taller students. The differences between seat height and fibular height ranged from -1.4 to 1.1 cm; and the differences between seat depth and buttock popliteal length ranged from -9.8 to 3.4 cm. Among obese students, the differences between seat width and 1/2 hip circumference ranged from -20.5 to -8.7 cm, while it ranged from -12.2 to -3.8 cm among non obese students. Conclusion Current furniture standards basically satisfy hygienic requirements; however, in the case of exceptionally tall and obese students, ergonomic accommodations such as adaptive seating allocation or personalized adjustments are recommended to meet hygienic requirements.

BACKGROUND:Lijin manipulation can promote skeletal muscle repair and treat skeletal muscle injury.However,the formation of fibrosis and scar tissue hyperplasia are closely related to the quality of skeletal muscle repair.To study the regulatory effect of Lijin manipulation on the formation of fibrosis and scar tissue hyperplasia is helpful to explain the related mechanism of Lijin manipulation to improve the repair quality of skeletal muscle injury. OBJECTIVE:To explore the mechanism of Lijin manipulation to improve the repair quality of skeletal muscle injury in rabbits,thereby providing a scientific basis for clinical treatment. METHODS:Forty-five healthy adult Japanese large-ear white rabbits were randomly divided into blank group,model group and Lijin group,with 15 rats in each group.Gastrocnemius strike modeling was performed in both model group and Lijin group.The Lijin group began to intervene with tendon manipulation on the 3rd day after modeling,once a day,and 15 minutes at a time.Five animals in each group were killed on the 7th,14th and 21st days after modeling.The morphology and inflammatory cell count of gastrocnemius were observed by hematoxylin-eosin staining,the collagen fiber amount was observed by Masson staining,the expression of interleukin-6 and interleukin-10 in gastrocnemius was detected by ELISA.The protein and mRNA expressions of paired cassette gene 7,myogenic differentiation factor,myoblastogenin,alpha-actin,transforming growth factor beta 1,and type Ⅰ collagen were detected by western blot and RT-PCR,respectively,and the expression of type Ⅰ collagen protein was detected by immunohistochemistry. RESULTS AND CONCLUSION:Hematoxylin-eosin staining and Masson staining showed that compared with the model group,inflammatory cell infiltration and collagen fiber content decreased in the Lijin group(P<0.01),and the muscle fibers gradually healed.ELISA results showed that compared with the model group,the expression of interleukin-6 in the Lijin group continued to decrease(P<0.05),and the expression of interleukin-10 increased on the 7th day after modeling(P<0.05)and then showed a decreasing trend(P<0.05).Western blot and RT-PCR results showed that compared with the model group,the protein and mRNA expressions of paired cassette gene 7,myogenic differentiation factor,myoblastogenin in the Lijin group were significantly increased on the 14th day after modeling(P<0.05),but decreased on the 21st day(P<0.05);the protein and mRNA expressions of alpha-actin,transforming growth factor beta 1,and type Ⅰ collagen in the Lijin group were significantly decreased compared with those in the model group(P<0.05).Immunohistochemical results showed that the expression of type Ⅰ collagen in the Lijin group was significantly lower than that in the model group(P<0.05).To conclude,Lijin manipulation could improve the repair quality of skeletal muscle injury by inhibiting inflammation,promoting the proliferation and differentiation of muscle satellite cells,and reducing fibrosis.

BACKGROUND:Osteoporotic vertebral fractures are the most common complication in patients with osteoporosis.As a new imaging technique,spine magnetic resonance imaging(MRI)is much more sensitive than X-ray film in the diagnosis of osteoporotic vertebral fractures.However,total spine MRI is costly and takes a long time to scan.Therefore,there is no consensus on whether all patients with osteoporotic vertebral fractures need to undergo total spine MRI scan and which patients need to undergo total spine MRI. OBJECTIVE:To analyze the distribution characteristics of vertebral fractures and explore their clinical significance by observing the whole spine MRI data of osteoporotic vertebral fractures patients. METHODS:Data of cases and MRI images of all patients diagnosed with fresh osteoporotic vertebral fractures who visited the Department of Orthopedics,Affiliated Hospital of Southwest Medical University from August 2018 to September 2022 were retrospectively analyzed.903 patients were included in the study based on inclusion and exclusion criteria.General information(age,gender,and body mass index),medical history characteristics(duration of illness,history of trauma surgery,percussion pain area,and pain score)were collected.The characteristics of vertebral fractures were analyzed through whole spine magnetic resonance imaging.Firstly,based on the number of vertebral fractures in patients,they were divided into the single vertebral fracture group(484 cases)and the multi-vertebral fracture group(419 cases),and the differences were analyzed between the two groups.Then,based on whether the farthest interval between the fractured vertebrae was greater than or equal to 5,the multi vertebral fracture group was further divided into two subgroups.Among them,Group A(the farthest interval between the fractured vertebrae was less than 5)contained 306 cases;Group B(with the farthest interval between fractured vertebral bodies greater than 5)included 113 cases.The differences were analyzed between two subgroups. RESULTS AND CONCLUSION:(1)Among 903 patients,419 patients(46.4%)had more than two fractured vertebrae.There were 654 patients(72.4%)with thoracolumbar fractures,and 54 patients(6%)with fractures in the thoracic plus lumbar region and the entire thoracic to lumbar region.In group B,96.5%of patients had multiregional percussion pain.(2)Compared with the patients in the single vertebral fracture group and the multi-vertebral fracture group,there were significant differences in bone mineral density,whether the medical history was greater than or equal to 1 month,the history of low energy injury,and the distribution and number of axial percussion pain areas in the spine during physical examination between the two groups(P<0.05).Age,gender,body mass index,whether there was underlying disease,pain visual analog scale score,whether there was a history of elderly thoracolumbar fracture,and whether there was a history of thoracolumbar surgery,and the number of fractured vertebrae had no statistical significance(P>0.05).(3)There were statistically significant differences between the Groups A and B in bone mineral density,the distribution and quantity of percussion pain area,and the history of low energy injury(P<0.05).There were no significant differences in age,gender,history of old fractures,visual analog scale score,body mass index,whether the medical history was longer than or equal to 1 month,history of underlying diseases,and history of thoracolumbar surgery between the two groups(P>0.05).(4)Patients with multiple low-energy trauma history,history of more than 1 month,multiple percussion pain,and the lower bone mineral density should be alert to the occurrence of multiple vertebral fracture and jump fracture.We recommend the whole spinal MRI for these patients.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.