Purpose: Common bile duct (CBD) stone recurrence after laparoscopic CBD exploration (LCBDE) is relatively common. No studies have been conducted evaluating the safety and feasibility of re-do LCBDE in the treatment of recurrent CBD stones. Methods: This single-center retrospective study reviewed 340 consecutive patients who underwent LCBDE for CBD stones between January 2004 and December 2020. Patients with pancreatobiliary malignancies and those who underwent other surgical procedures were excluded. Results: Of the 340 included patients, 45 experienced a recurrence after a mean follow-up period of 24.2 months. Of them, 18 underwent re-do LCBDE, 20 underwent endoscopic intervention, 2 underwent radiologic intervention, and 5 underwent observation. Re-do LCBDE and initial LCBDE showed similar surgical outcomes in terms of operative time (113.1 minutes vs. 107.5 minutes, P = 0.515), estimated blood loss (42.5 mL vs. 49.1 mL, P = 0.661), open conversion rate (2.9% vs. 0%, P = 0.461), postoperative complication (15.3% vs. 22.2%, P = 0.430), and postoperative hospital stay (6.5 days vs. 6.4 days, P = 0.921). Comparing re-do LCBDE and nonsurgical treatment (endoscopic or radiologic), no statistically significant differences were noted in posttreatment complication (22.2% vs. 13.6%, P = 0.477), hospital stay (6.4 days vs.7.3 days, P = 0.607), and recurrence (50.0% vs. 36.4%, P = 0.385). The clearance rate was higher in the re-do LCBDE group than in the nonsurgical group (100% vs. 81.8%, P = 0.057). Conclusion Compared to initial LCBDE and endoscopic or radiological treatments, re-do LCBDE for recurrent CBD stones is a treatment option worth considering in selected patients.

Achieving periodontal regeneration in class III furcation defects is challenging. Many studies have applied growth factors to periodontal defects, including fibroblast growth factors (FGFs), which demonstrate angiogenic activity and mitogenic ability. This study aimed to evaluate periodontal regeneration following the application of FGF-2 to deproteinized bovine bone mineral (DBBM) in surgically created supra-alveolar class III furcation defects of the mandibular premolars of beagles. The defects were divided into the control, DBBM, and FGF/DBBM groups. For the control group, only root planing was performed. For the DBBM group, only DBBM particles were implanted into the furcation. For the FGF/DBBM group, DBBM was soaked with 0.3% FGF-2 solution, and FGF-2/ DBBM was then positioned into the furcation. After 8 weeks, the dogs were euthanized. The micro-computed tomography analysis revealed that the changes in the bone volume of the furcation area were significantly greater in the FGF/DBBM group than in the DBBM group. In the histomorphometric analysis, the area of the newly formed bone was significantly greater in the FGF/DBBM group than in the DBBM or control group. The cementum extension was significantly longer in the FGF/DBBM or DBBM group than in the control group. The epithelial area was significantly less in the FGF/DBBM group than in the DBBM or control group. The application of FGF combined with DBBM to a class III defect enhanced the regeneration of periodontal tissues and increased the healing rate. This finding indicates that FGF-2 combined with DBBM can be applied to class III defects clinically.

Purpose: Common bile duct (CBD) stone recurrence after laparoscopic CBD exploration (LCBDE) is relatively common. No studies have been conducted evaluating the safety and feasibility of re-do LCBDE in the treatment of recurrent CBD stones. Methods: This single-center retrospective study reviewed 340 consecutive patients who underwent LCBDE for CBD stones between January 2004 and December 2020. Patients with pancreatobiliary malignancies and those who underwent other surgical procedures were excluded. Results: Of the 340 included patients, 45 experienced a recurrence after a mean follow-up period of 24.2 months. Of them, 18 underwent re-do LCBDE, 20 underwent endoscopic intervention, 2 underwent radiologic intervention, and 5 underwent observation. Re-do LCBDE and initial LCBDE showed similar surgical outcomes in terms of operative time (113.1 minutes vs. 107.5 minutes, P = 0.515), estimated blood loss (42.5 mL vs. 49.1 mL, P = 0.661), open conversion rate (2.9% vs. 0%, P = 0.461), postoperative complication (15.3% vs. 22.2%, P = 0.430), and postoperative hospital stay (6.5 days vs. 6.4 days, P = 0.921). Comparing re-do LCBDE and nonsurgical treatment (endoscopic or radiologic), no statistically significant differences were noted in posttreatment complication (22.2% vs. 13.6%, P = 0.477), hospital stay (6.4 days vs.7.3 days, P = 0.607), and recurrence (50.0% vs. 36.4%, P = 0.385). The clearance rate was higher in the re-do LCBDE group than in the nonsurgical group (100% vs. 81.8%, P = 0.057). Conclusion Compared to initial LCBDE and endoscopic or radiological treatments, re-do LCBDE for recurrent CBD stones is a treatment option worth considering in selected patients.

Purpose: Common bile duct (CBD) stone recurrence after laparoscopic CBD exploration (LCBDE) is relatively common. No studies have been conducted evaluating the safety and feasibility of re-do LCBDE in the treatment of recurrent CBD stones. Methods: This single-center retrospective study reviewed 340 consecutive patients who underwent LCBDE for CBD stones between January 2004 and December 2020. Patients with pancreatobiliary malignancies and those who underwent other surgical procedures were excluded. Results: Of the 340 included patients, 45 experienced a recurrence after a mean follow-up period of 24.2 months. Of them, 18 underwent re-do LCBDE, 20 underwent endoscopic intervention, 2 underwent radiologic intervention, and 5 underwent observation. Re-do LCBDE and initial LCBDE showed similar surgical outcomes in terms of operative time (113.1 minutes vs. 107.5 minutes, P = 0.515), estimated blood loss (42.5 mL vs. 49.1 mL, P = 0.661), open conversion rate (2.9% vs. 0%, P = 0.461), postoperative complication (15.3% vs. 22.2%, P = 0.430), and postoperative hospital stay (6.5 days vs. 6.4 days, P = 0.921). Comparing re-do LCBDE and nonsurgical treatment (endoscopic or radiologic), no statistically significant differences were noted in posttreatment complication (22.2% vs. 13.6%, P = 0.477), hospital stay (6.4 days vs.7.3 days, P = 0.607), and recurrence (50.0% vs. 36.4%, P = 0.385). The clearance rate was higher in the re-do LCBDE group than in the nonsurgical group (100% vs. 81.8%, P = 0.057). Conclusion Compared to initial LCBDE and endoscopic or radiological treatments, re-do LCBDE for recurrent CBD stones is a treatment option worth considering in selected patients.

PURPOSE: This study aimed to compare the accuracy of an alternative scan path with that of traditional scan paths to obtain a more accurate method for complete arch scans. MATERIALS AND METHODS: A mandibular stone cast, including tooth preparations for the inlay, crown, and fixed prosthesis, was scanned 10 times using four different scan paths (A, B, C, and D). The scans were converted into stereolithography files, resized, and superimposed onto a control file obtained from a desktop scanner. The scan time, total surface deviation, and local deviation of the mandibular teeth were measured. One-way analysis of variance (ANOVA) and Welch ANOVA were used for statistical analyses (α = .05). The relative standard deviation and standard error of the mean were calculated to evaluate accuracy. RESULTS: The total surface deviation differed significantly according to the scanning path despite a similar scan time. Path D had the highest accuracy and the most uniform color maps, showing minimal deformation of the digital model. Meanwhile, no significant differences were found in the local deviations in the individual tooth assessments, likely owing to issues with the superimposition method. CONCLUSION Among all scan paths, the scan path with the shortest distance from the starting point to the end point showed the smallest total surface deviation and the highest accuracy. No differences were observed in the deviations of specific teeth based on the scan path.

PURPOSE: This study aimed to compare the accuracy of an alternative scan path with that of traditional scan paths to obtain a more accurate method for complete arch scans. MATERIALS AND METHODS: A mandibular stone cast, including tooth preparations for the inlay, crown, and fixed prosthesis, was scanned 10 times using four different scan paths (A, B, C, and D). The scans were converted into stereolithography files, resized, and superimposed onto a control file obtained from a desktop scanner. The scan time, total surface deviation, and local deviation of the mandibular teeth were measured. One-way analysis of variance (ANOVA) and Welch ANOVA were used for statistical analyses (α = .05). The relative standard deviation and standard error of the mean were calculated to evaluate accuracy. RESULTS: The total surface deviation differed significantly according to the scanning path despite a similar scan time. Path D had the highest accuracy and the most uniform color maps, showing minimal deformation of the digital model. Meanwhile, no significant differences were found in the local deviations in the individual tooth assessments, likely owing to issues with the superimposition method. CONCLUSION Among all scan paths, the scan path with the shortest distance from the starting point to the end point showed the smallest total surface deviation and the highest accuracy. No differences were observed in the deviations of specific teeth based on the scan path.

PURPOSE: This study aimed to compare the accuracy of an alternative scan path with that of traditional scan paths to obtain a more accurate method for complete arch scans. MATERIALS AND METHODS: A mandibular stone cast, including tooth preparations for the inlay, crown, and fixed prosthesis, was scanned 10 times using four different scan paths (A, B, C, and D). The scans were converted into stereolithography files, resized, and superimposed onto a control file obtained from a desktop scanner. The scan time, total surface deviation, and local deviation of the mandibular teeth were measured. One-way analysis of variance (ANOVA) and Welch ANOVA were used for statistical analyses (α = .05). The relative standard deviation and standard error of the mean were calculated to evaluate accuracy. RESULTS: The total surface deviation differed significantly according to the scanning path despite a similar scan time. Path D had the highest accuracy and the most uniform color maps, showing minimal deformation of the digital model. Meanwhile, no significant differences were found in the local deviations in the individual tooth assessments, likely owing to issues with the superimposition method. CONCLUSION Among all scan paths, the scan path with the shortest distance from the starting point to the end point showed the smallest total surface deviation and the highest accuracy. No differences were observed in the deviations of specific teeth based on the scan path.

PURPOSE: This study aimed to compare the accuracy of an alternative scan path with that of traditional scan paths to obtain a more accurate method for complete arch scans. MATERIALS AND METHODS: A mandibular stone cast, including tooth preparations for the inlay, crown, and fixed prosthesis, was scanned 10 times using four different scan paths (A, B, C, and D). The scans were converted into stereolithography files, resized, and superimposed onto a control file obtained from a desktop scanner. The scan time, total surface deviation, and local deviation of the mandibular teeth were measured. One-way analysis of variance (ANOVA) and Welch ANOVA were used for statistical analyses (α = .05). The relative standard deviation and standard error of the mean were calculated to evaluate accuracy. RESULTS: The total surface deviation differed significantly according to the scanning path despite a similar scan time. Path D had the highest accuracy and the most uniform color maps, showing minimal deformation of the digital model. Meanwhile, no significant differences were found in the local deviations in the individual tooth assessments, likely owing to issues with the superimposition method. CONCLUSION Among all scan paths, the scan path with the shortest distance from the starting point to the end point showed the smallest total surface deviation and the highest accuracy. No differences were observed in the deviations of specific teeth based on the scan path.

PURPOSE: This study aimed to compare the accuracy of an alternative scan path with that of traditional scan paths to obtain a more accurate method for complete arch scans. MATERIALS AND METHODS: A mandibular stone cast, including tooth preparations for the inlay, crown, and fixed prosthesis, was scanned 10 times using four different scan paths (A, B, C, and D). The scans were converted into stereolithography files, resized, and superimposed onto a control file obtained from a desktop scanner. The scan time, total surface deviation, and local deviation of the mandibular teeth were measured. One-way analysis of variance (ANOVA) and Welch ANOVA were used for statistical analyses (α = .05). The relative standard deviation and standard error of the mean were calculated to evaluate accuracy. RESULTS: The total surface deviation differed significantly according to the scanning path despite a similar scan time. Path D had the highest accuracy and the most uniform color maps, showing minimal deformation of the digital model. Meanwhile, no significant differences were found in the local deviations in the individual tooth assessments, likely owing to issues with the superimposition method. CONCLUSION Among all scan paths, the scan path with the shortest distance from the starting point to the end point showed the smallest total surface deviation and the highest accuracy. No differences were observed in the deviations of specific teeth based on the scan path.

Background: s/Aims: Reported incidence of extrahepatic bile duct cancer is higher in Asians than in Western populations. Korea, in particular, is one of the countries with the highest incidence rates of extrahepatic bile duct cancer in the world. Although research and innovative therapeutic modalities for extrahepatic bile duct cancer are emerging, clinical guidelines are currently unavailable in Korea. The Korean Society of Hepato-Biliary-Pancreatic Surgery in collaboration with related societies (Korean Pancreatic and Biliary Surgery Society, Korean Society of Abdominal Radiology, Korean Society of Medical Oncology, Korean Society of Radiation Oncology, Korean Society of Pathologists, and Korean Society of Nuclear Medicine) decided to establish clinical guideline for extrahepatic bile duct cancer in June 2021. Methods: Contents of the guidelines were developed through subgroup meetings for each key question and a preliminary draft was finalized through a Clinical Guidelines Committee workshop. Results: In November 2021, the finalized draft was presented for public scrutiny during a formal hearing. Conclusions The extrahepatic guideline committee believed that this guideline could be helpful in the treatment of patients.