OBJECTIVE: To investigate the effectiveness of three-dimensional (3D)-printed hemi-pelvic prosthesis for revision of aseptic loosening or screw fracture of modular hemi-pelvic prosthesis. METHODS: Between February 2017 and January 2020, 11 patients with aseptic loosening or screw fracture of modular hemi-pelvic prosthesis were revised using 3D-printed hemi-pelvic prostheses. There were 7 males and 4 females with an average age of 44 years (range, 25-60 years). In the first operation, all patients underwent total tumor resection, modular hemi-pelvic prosthesis reconstruction, and autologous femoral head transplantation. According to the Enneking pelvic partition system, 8 cases were resected in zones Ⅰ+Ⅱ and 3 cases in zones Ⅰ+Ⅱ+Ⅲ. The interval from the initial operation to this revision ranged from 14.3-66.2 months, with an average of 35.8 months. The operation time, the amount of intraoperative bleeding, and the occurrence of complications were recorded. At 6 months after the first operation, before revision, and at last follow-up, the American Musculoskeletal Tumor Society (MSTS) score and Harris score were used to evaluate the recovery of lower limb function. The pain-free walking distance of patients without brace assistance was recorded at last follow-up. X-ray films were taken at 1 month after the first operation, before revision, and at 1 month after revision, the acetabulum position was assessed by the differences in weight arm and cup height between bilateral hip joints. At last follow-up, the digital X-ray tomography was taken to evaluate the prosthesis-bone integration and the occurrence of aseptic loosening. RESULTS: The operation time was 182.6-238.0 minutes (mean, 197.4 minutes). The amount of intraoperative bleeding was 400-860 mL (mean, 550.0 mL). All incisions healed by first intention with no infection, hip dislocation, nerve damage, or vascular-related adverse events. The MSTS score and Harris score at last follow-up were significantly higher than those at 6 months after the first operation and before revision ( P<0.05), while the score before revision was significantly lower than that at 6 months after the first operation ( P<0.05). At last follow-up, the patients were able to walk more than 1 000 meters painlessly without brace assistance. Imaging review showed that the difference of cup height at 1 month after revision was significantly lower than that at 1 month after the first operation and before revision, and at 1 month after the first operation than before revision operation, and the differences were significant ( P<0.05). There was no significant difference in the difference of weight arm among three time points ( P>0.05). All prostheses were well integrated, and no aseptic loosening of the prosthesis or screw fracture occurred. CONCLUSION Revision with 3D-printed hemi-pelvic prostheses benefited in reconstructing stable pelvic ring and natural bodyweight transmission for patients encountering the aseptic loosening or screw fracture of modular hemi-pelvic prosthesis. Early postoperative rehabilitation training can maximize the recovery of patient limb function, reduce pain during walking, and reduce the incidence of complications.
Male ; Female ; Humans ; Adult ; Arthroplasty, Replacement, Hip/methods* ; Hip Prosthesis ; Treatment Outcome ; Prosthesis Failure ; Fractures, Bone/surgery* ; Retrospective Studies ; Neoplasms

Hip firearm injuries are rare injuries that could lead to serious complications, such as posttraumatic hip arthritis and coloarticular fistula. We report a case of a 25-year-old male who sustained a pelvic injury caused by a single bullet which led to a bilateral acetabular fracture, concomitant with a colon injury treated on an emergency basis by a diverting colostomy; acetabular fractures were treated conservatively by traction. After the patient recovered from the abdominal injury, he was presented with bilateral hip pain and limited motion; plain radiographs showed bilateral hip arthritis with proximal migration of the femoral head and bilateral acetabular defect classified as Paprosky type ⅢA. Reconstruction of the hips was performed using the same technique: impaction bone grafting for acetabular defect reconstruction and a reversed hybrid total hip arthroplasty (THA) 6 months apart. The patient presented with loosening of the left THA acetabular cup 3 years later, which was revised; then he presented with a discharging sinus from the left THA with suspicion of coloarticular fistula, which was confirmed using CT with contrast material. A temporary colostomy and fistula excision were performed, and a cement spacer was applied to the hip. After clearing the infection, a final revision THA for the left hip was performed. Treating post-firearm hip arthritis by THA is challenging, especially in the situation of neglected cases with the presence of an acetabular defect. Concomitant intestinal injury increases the risk of infection with the possibility of coloarticular fistula formation, which could present later. Working with a multidisciplinary team is paramount.
Male ; Humans ; Adult ; Arthroplasty, Replacement, Hip ; Firearms ; Wounds, Gunshot/surgery* ; Acetabulum/injuries* ; Hip Fractures/surgery* ; Arthritis/surgery* ; Spinal Fractures/surgery* ; Reoperation ; Fistula/surgery* ; Treatment Outcome ; Follow-Up Studies ; Prosthesis Failure ; Retrospective Studies

OBJECTIVE: To compare the long-term follow-up effect and complications of ceramic on ceramic (CoC) interface and ceramic on polyethyleneon ceramic (CoP) interface in primary total hip arthroplasty, and provide clinical evidence. METHODS: Search PubMed, EMBase, the CoChrane Library databases, Web of science, Wanfang database, and CNKI from January 2000 to September 2021, screening and inclusion of randomized controlled trials (RCTs) comparing the long-term efficacy and complications of CoC interface and CoP interface in total hip arthroplasty. Literature screening, quality evaluation and data extraction were carried out according to the inclusion and exclusion criteria, using Review Manager 5.3 statistical software. The software was used to perform statistical analysis on joint function, revision, prosthesis fracture, abnormal joint noise, and prosthesis wear rate after CoC or CoP. RESULTS: Seven RCTs studies were included, including 390 cases of hips with CoC artificial joints and 384 cases of hips with CoP artificial joints. The long-term joint function improvement of CoC and CoP artificial joints was similar and there was no significant differences, with an average difference was MD=0.63, 95%CI=(-1.81, 3.07), P=0.61. About the postoperative complications, CoC artificial joints have higher incidence rate of abnormal joint noise, with odds ratio (OR)=11.05, 95%CI=(2.04, 59.84), P=0.005. CoP artificial joints wear faster, with an average MD=-87.11, 95%CI=(-114.40, -59.82), P<0.000 1. There was no significant difference between the two groups in the replacement-related complications such as joint dislocation, prosthesis loosening, osteolysis, and the rate of prosthesis revision caused by various reasons. CONCLUSION The clinical function results and complications of CoC artificial joints are comparable to those of CoP artificial joints. Although CoP artificial joint prosthesis has a faster wear rate, it does not affect joint function and increase complications, and there is no abnormal joint noise. CoC is expensive and the long-term efficacy is equivalent to CoP. Clinicians should consider cost performance when choosing CoC.
Humans ; Arthroplasty, Replacement, Hip/methods* ; Hip Prosthesis ; Follow-Up Studies ; Prosthesis Design ; Polyethylene ; Prosthesis Failure ; Reoperation ; Ceramics ; Treatment Outcome

OBJECTIVE: To analyze the malfunction and maintenance process of Carestream digital X-ray machine DRX-NOVA for reference. METHODS: The fault of Carestream digital X-ray machine DRX-NOVA in 2011-2021 was summarized, the fault types were classified, and the maintenance process was summarized. RESULTS: Fault types can be divided into three categories, each of which has its own characteristics and specific solutions. CONCLUSIONS It is necessary to master the principle of equipment to repair all kinds of equipment failures. Repair the machine should be careful, comprehensive consideration of the cause of the failure. To correctly understand and analyze the operation of the machine under normal conditions, we can accurately analyze the cause of failure, so that we can really solve the problem.
X-Rays ; Radiography ; Radiographic Image Enhancement ; Equipment Failure

OBJECTIVES: This study aimed to evaluate the long-term clinical efficacy of simple taper retentive implants in the posterior dental area after immediate implantation for 5-7 years. METHODS: Selected from January 2015 to December 2017 in the Fourth Affiliated Hospital of Nanchang University dental clinic line tooth area immediately after the implant prosthesis, a total of 38 patients, 53 implants, were deep into (bone under 2 mm or higher) and the upper structure was repaired. In addition, after the completion of tracking observation of 60-90 months, the implant surrounding bone health was recorded and analyzed. RESULTS: After 5-7 years of follow-up, 1 of the 53 implants failed to fall out, and the implant retention rate was 98.1%. The amount of bone resorption in the proximal and distal margins 5-7 years after implant restoration was (0.16±0.94) mm and (-0.01±1.29) mm, respectively, and the difference in bone height between the proximal and distal margins of the implant and the immediate post-restoration period was not statistically significant (P>0.05). No statistically significant differences were found in the effects of periodontitis, implant site inflammation, and smoking on peri-implant marginal bone resorption (P>0.05). CONCLUSIONS The single taper-retained implant broadens the indications for immediate implant placement in the posterior region, and its deep sub-osseous placement (≥2 mm below the bone) avoids to a certain extent the disturbance of the implant by external stimuli and the exposure of the cervical abutment of the implant, with the good long-term stability of the marginal bone around the implant.
Humans ; Dental Implantation, Endosseous ; Dental Implants ; Immediate Dental Implant Loading ; Follow-Up Studies ; Dental Implants, Single-Tooth ; Alveolar Bone Loss/surgery* ; Treatment Outcome ; Dental Prosthesis, Implant-Supported ; Dental Restoration Failure

Objective: To explore the long-term clinical efficacy of transcatheter repair of mitral paravalvular leak (PVL) post surgical mitral valve replacement. Methods: This study is a retrospective study. Patients who completed transcatheter repair of paravalvular leak after surgical mitral valve replacement at Shanghai Chest Hospital, Shanghai Jiaotong University School of Medicine from March 2010 to December 2018 were included. Technical success was defined as the occluder being stably implanted in the paravalvular leak site without affecting the function of the mitral valve and surrounding tissues; and there were no intervention-related complications, such as new hemolysis or aggravated hemolysis, and echocardiography confirmed mitral paravalvular regurgitation reduced by more than 1 grade. Patients were followed up at 30 days, 1, and 3 years after the intervention. The main endpoints were all-cause death and re-surgery due to interventional failure or serious complications. The occurrence of occluder-mediated hemolysis and chronic renal insufficiency was recorded, and patients were monitored with echocardiography during follow up. Results: A total of 75 patients were included, aged (54.3±22.9) years old, and 38 patients were males. All patients had decreased cardiac function and/or hemolysis before intervention. Procedural success was achieved in 54 patients (72.0%). Incidence of device-mediated hemolysis was 18.7% (14/75). During the follow-up period, all-cause death occurred in 7 patients (9.3%), and 3 were cardiac deaths.The 3-year event-free survival rate was 81.3% (61/75). The need for cardiac surgery was 9.3% (7/75): 3 cases due to severe device-mediated hemolysis, 2 cases due to prosthetic valve failure and 2 cases due to moderate to severe residual regurgitation. The echocardiography follow-up results showed that the position of the occluder was stable, there was no impact on the artificial valve function and surrounding structures, and the residual regurgitation was stable without progressive increase in event-free patients. Compared with pre-intervention, the left ventricular end systolic diameter ((33.9±7.4)mm vs. (38.3±8.9) mm, P=0.036), end diastolic diameter ((53.7±8.3) mm vs. (58.4±9.1) mm, P=0.045) and left atrial diameter (59.3 (44.5, 90.7) mm vs. 64.3 (44.8, 96.6) mm, P=0.049) were significantly reduced, pulmonary artery systolic pressure was also significantly decreased ((36.5±15.8) mmHg vs. (46.3±14.9) mmHg, P=0.022, 1 mmHg=0.133 kPa). There was no significant difference between 3 years and 1 year after transcatheter repair of mitral paravalvular leak post surgical mitral valve replacement (all P>0.05). Conclusion: Transcatheter repair of mitral paravalvular leak post surgical mitral valve replacement is an effective treatment option in selective patients.
Male ; Humans ; Adult ; Middle Aged ; Aged ; Female ; Mitral Valve/surgery* ; Heart Valve Prosthesis Implantation ; Heart Valve Prosthesis ; Retrospective Studies ; Hemolysis ; China ; Mitral Valve Insufficiency/surgery* ; Treatment Outcome ; Cardiac Catheterization ; Prosthesis Failure

Objective: To evaluate and compare the short-term efficacy of domestic mechanical-locked (Clip2Edge) and elastic self-locked (ValveClip) transcranial mitral valve edge-to-edge interventional repair (TEER) devices in the treatment of functional mitral regurgitant valves. Methods: In this retrospective non-randomized comparative study, patients underwent TEER procedure in Fuwai Yunnan Cardiovascular Disease Hospital from May 2022 to April 2023 for heart failure combined with moderate to severe or severe functional mitral valve were divided into Clip2Edge and ValveClip groups based on the TEER system used. Baseline, perioperative, and postoperative 30 d follow-up data were collected and compared between the two groups. The primary outcome was the success rate on the 30 d post operation, while secondary outcomes included immediate postoperative technical success rate and the incidence of all-cause mortality on the 30 d post operation, readmission rate of acute heart failure, cerebral infarction, severe bleeding, and other serious adverse events rates. Results: A total of 60 patients were enrolled, 34 patients were in the Clip2Edge group and 26 in the ValveClip group, mean age was (63.8±9.3) years, and 24 patients (40%) were female. There were no significant differences in baseline data of age, cardiac function, comorbidities, mitral regurgitation 4+(19(73%) vs. 29(85%)), the end-diastolic volume of left ventricle ((220.8±91.2) ml vs. (210.8±71.7) ml) between the two groups (all P>0.05). The technical success rate immediately after the procedure was 100%. There were no readmission of acute heart failure, death, cerebral infarction, severe bleeding, and other serious adverse events up to the 30 d follow-up. Device success rate was similar between the ValveClip group (24 cases (100%)) and the Clip2Edge group (27 cases (96%)) (P>0.05). Conclusion: Both types of novel domestic TEER devices are safe and feasible in treating patients with functional mitral regurgitation.
Humans ; Female ; Middle Aged ; Aged ; Male ; Mitral Valve Insufficiency/etiology* ; Retrospective Studies ; East Asian People ; Heart Valve Prosthesis Implantation ; Treatment Outcome ; China ; Heart Failure/etiology* ; Cardiac Catheterization

Objective: To evaluate and compare the short-term efficacy of domestic mechanical-locked (Clip2Edge) and elastic self-locked (ValveClip) transcranial mitral valve edge-to-edge interventional repair (TEER) devices in the treatment of functional mitral regurgitant valves. Methods: In this retrospective non-randomized comparative study, patients underwent TEER procedure in Fuwai Yunnan Cardiovascular Disease Hospital from May 2022 to April 2023 for heart failure combined with moderate to severe or severe functional mitral valve were divided into Clip2Edge and ValveClip groups based on the TEER system used. Baseline, perioperative, and postoperative 30 d follow-up data were collected and compared between the two groups. The primary outcome was the success rate on the 30 d post operation, while secondary outcomes included immediate postoperative technical success rate and the incidence of all-cause mortality on the 30 d post operation, readmission rate of acute heart failure, cerebral infarction, severe bleeding, and other serious adverse events rates. Results: A total of 60 patients were enrolled, 34 patients were in the Clip2Edge group and 26 in the ValveClip group, mean age was (63.8±9.3) years, and 24 patients (40%) were female. There were no significant differences in baseline data of age, cardiac function, comorbidities, mitral regurgitation 4+(19(73%) vs. 29(85%)), the end-diastolic volume of left ventricle ((220.8±91.2) ml vs. (210.8±71.7) ml) between the two groups (all P>0.05). The technical success rate immediately after the procedure was 100%. There were no readmission of acute heart failure, death, cerebral infarction, severe bleeding, and other serious adverse events up to the 30 d follow-up. Device success rate was similar between the ValveClip group (24 cases (100%)) and the Clip2Edge group (27 cases (96%)) (P>0.05). Conclusion: Both types of novel domestic TEER devices are safe and feasible in treating patients with functional mitral regurgitation.
Humans ; Female ; Middle Aged ; Aged ; Male ; Mitral Valve Insufficiency/etiology* ; Retrospective Studies ; East Asian People ; Heart Valve Prosthesis Implantation ; Treatment Outcome ; China ; Heart Failure/etiology* ; Cardiac Catheterization

OBJECTIVE: To investigate the clinical effect of porous tantalum Jumbo cup on acetabular reconstruction in revision of total hip arthroplasty. METHODS: From September 2014 to December 2017, 18 patients(18 hips) with acetabular defect were reconstructed by porous tantalum Jumbo cup technology, including 6 males and 12 females;the age ranged from 54 to 76 years old with an average of(63.8±15.3) years. There were 6 cases of paprosky typeⅡA, 8 cases of typeⅡB, 2 cases of typeⅡC and 2 cases of type Ⅲ a. Harris score and visual analogue scale (VAS) were performed before and after operation. Imaging examination was performed to evaluate the position of hip rotation center and prosthesis, and to judge whether acetabular loosening, displacement and complications existed. RESULTS: All cases were followed up for 13 to 49 months, with an average of 20.6 months. Harris score increased from 54.6±4.7 to 86.5±3.2 one year after operation(P<0.01), and VAS score decreased from 6.8±0.7 to 0.8±0.6 one year after operation (P<0.01). The transverse coordinate of hip rotation center was (3.52±0.72) cm before operation and (3.47±0.54) cm after operation (P>0.05). The longitudinal coordinate of hip rotation center was improved from (3.02±0.84) cm before operation to (2.35±0.53) cm after operation (P<0.01). During the follow-up period, the Jumbo cup was well fixed without loosening and displacement, the acetabular cup had bone ingrowth in varying degrees, and no light transmission line and osteolysis around the acetabular cup were found. No complications such as infection and nerve injury occurred. CONCLUSION The method of reconstructing acetabular bone defect with porous tantalum Jumbo cup is simple and easy, the early stability of acetabulum is good, and the short-term follow-up effect is good.
Acetabulum/surgery* ; Aged ; Arthroplasty, Replacement, Hip ; Female ; Follow-Up Studies ; Hip Prosthesis ; Humans ; Male ; Middle Aged ; Porosity ; Prosthesis Failure ; Reoperation ; Retrospective Studies ; Tantalum ; Treatment Outcome

The choice of friction interface has always been a controversial topic in hip arthroplasty. Although the metal-on-metal (MoM) interface has gradually faded out of our vision, its revision is a clinical difficulty. Adverse reactions to metal debris (ARMD) is the most common indication for MoM hip arthroplasty revision, and the clinical results of hip arthroplasty due to ARMD are not satisfactory. At present, the indications and suggestions for revision of ARMD are not uniform. In this article, the clinical diagnosis, indications of revision, risk factors of prognosis, intraoperative suggestions and reasons for revision of ARMD were summarized. This article briefly introduces the diagnosis and treatment strategies and precautions of hip arthroplasty due to ARMD, in order to provide reference for such patients in clinical practice.
Arthroplasty, Replacement, Hip/adverse effects* ; Hip Prosthesis/adverse effects* ; Humans ; Metal-on-Metal Joint Prostheses/adverse effects* ; Prosthesis Design ; Prosthesis Failure ; Reoperation