Background: South Korean on-site workers in the public sector, fully covered by the Occupational Safety and Health Act, often perform hazardous tasks. However, their status and injury rates remain poorly documented. This study aimed to analyze changes in injury rates and the proportion of work-related diseases (WRDs) among on-site workers in basic local governments (BLGs) following workforce reductions between 2016 and 2018. Methods: Data from two sources provided by the Ministry of Employment and Labor were analyzed: organizational data on the number of on-site workers, and cases of injuries, deaths, and diseases among on-site workers in 226 BLGs from 2016 to 2018; and workers’ compensation claims data (individual data) for on-site workers in BLGs during the same period. Injury, mortality, and disease incidence rates were calculated and compared between BLGs with increased and decreased workforce. The proportion of WRDs among all the injuries was also examined. Results: The total number of on-site workers in BLGs decreased by 18.1% in 2018 compared with 2016. The injury rate increased from 0.46% in 2016 to 0.62% in 2018. BLGs with workforce reductions showed higher injury rates, particularly in those with fewer than 1,000 on-site workers. The proportion of WRDs among all injuries increased by 1.34 times in 2018 compared with 2016. Conclusions Workforce reductions among on-site workers in BLGs are associated with higher injury rates and a great proportion of WRDs. These findings highlight the need for improved occupational safety and health practices within the public sector and serve as an important basis for establishing workforce management and injury prevention policies. However, limitations in the available data made it challenging to identify worker groups particularly vulnerable to WRDs. Further research is needed, as it is critical for the development of effective occupational safety and health policies.

Background: School food service workers are highly likely to develop heat-related illnesses because of their work environment. However, studies that have examined the risk of heat-related illnesses among them are limited. The purpose of this study was to investigate the status of heat exposure, implementation of heat wave countermeasures, and prevalence of heat-related illness symptoms among school food service workers in Korea, and to explore the relationship between them. Methods: A cross-sectional study was conducted through an online survey of school food service workers from May 25 to June 12, 2023, via three labor unions. We analyzed 6,244 valid responses. We assessed general characteristics, heat-related illness symptoms (heat rash, heat cramps, heat edema, heat exhaustion, heat syncope), duration of heat exposure during heat waves, and heat wave preventive measures. Multiple logistic regression analyses were performed, with adjustments for age, occupation, hypertension, diabetes, and school type. Results: More than one-third of school food service workers reported heat exposure between May and September exceeding 4 hours daily, and 94.6% experienced at least one heat-related illness symptom during the last year. A dose-response relationship was observed between heat exposure duration and heat-related illness symptoms (p for trend < 0.001). School food service workers who did not have increased rest periods or did not reduce high-heat prepared foods showed significantly higher odds ratios for heat-related illness symptoms. Conclusions School food service workers experience substantial heat exposure and a high prevalence of heat-related illness symptoms. The risk of heat-related illness symptoms was associated with extended duration of heat exposure. Increasing rest periods and reducing high-heat food preparation were effective preventive measures. These findings underscore the need for improved heat exposure management and implementation of effective preventive measures to protect the health of school food service workers, with particular attention to appropriate rest periods.

Background: The increasing prevalence of cementless total knee arthroplasty (TKA) necessitates a reliable assessment of bone quality. Central bone mineral density (BMD), measured by dual-energy x-ray absorptiometry (DEXA) in the lumbar spine and hip, is conventionally used to estimate bone quality. However, its effectiveness in predicting the actual bone strength at the knee, which is crucial for cementless TKA, is under scrutiny. This study investigated the relationship between central BMD and actual bone strength at the knee. Methods: This prospective study included 191 knees undergoing standard posterior-stabilized TKA between November 2021 and March 2023. Central BMD was assessed 3 months before TKA, and the failure load of bone fragments collected during box preparation was directly measured using an indentation test. Relationships between central BMD and failure load as a measure of the actual bone strength at the knee were analyzed. Results: Linear regression analysis revealed a weak correlation between central BMD and the actual bone strength at the knee (R 2= 0.146 in all patients; < 0.001 in osteoporosis group; 0.126 in non-osteoporosis group). The correlation suggested by the regression models was particularly insignificant in the osteoporosis subgroup, showing that central BMD is not a reliable predictor of bone strength for cementless TKA. Conclusions Central BMD measurements have limited utility in accurately predicting the real bone strength at the knee for cementless TKA. This study highlights the need for more specific and direct methods of assessing bone quality at the knee to ensure the success of cementless TKA.

Background: The increasing prevalence of cementless total knee arthroplasty (TKA) necessitates a reliable assessment of bone quality. Central bone mineral density (BMD), measured by dual-energy x-ray absorptiometry (DEXA) in the lumbar spine and hip, is conventionally used to estimate bone quality. However, its effectiveness in predicting the actual bone strength at the knee, which is crucial for cementless TKA, is under scrutiny. This study investigated the relationship between central BMD and actual bone strength at the knee. Methods: This prospective study included 191 knees undergoing standard posterior-stabilized TKA between November 2021 and March 2023. Central BMD was assessed 3 months before TKA, and the failure load of bone fragments collected during box preparation was directly measured using an indentation test. Relationships between central BMD and failure load as a measure of the actual bone strength at the knee were analyzed. Results: Linear regression analysis revealed a weak correlation between central BMD and the actual bone strength at the knee (R 2= 0.146 in all patients; < 0.001 in osteoporosis group; 0.126 in non-osteoporosis group). The correlation suggested by the regression models was particularly insignificant in the osteoporosis subgroup, showing that central BMD is not a reliable predictor of bone strength for cementless TKA. Conclusions Central BMD measurements have limited utility in accurately predicting the real bone strength at the knee for cementless TKA. This study highlights the need for more specific and direct methods of assessing bone quality at the knee to ensure the success of cementless TKA.

Background: The increasing prevalence of cementless total knee arthroplasty (TKA) necessitates a reliable assessment of bone quality. Central bone mineral density (BMD), measured by dual-energy x-ray absorptiometry (DEXA) in the lumbar spine and hip, is conventionally used to estimate bone quality. However, its effectiveness in predicting the actual bone strength at the knee, which is crucial for cementless TKA, is under scrutiny. This study investigated the relationship between central BMD and actual bone strength at the knee. Methods: This prospective study included 191 knees undergoing standard posterior-stabilized TKA between November 2021 and March 2023. Central BMD was assessed 3 months before TKA, and the failure load of bone fragments collected during box preparation was directly measured using an indentation test. Relationships between central BMD and failure load as a measure of the actual bone strength at the knee were analyzed. Results: Linear regression analysis revealed a weak correlation between central BMD and the actual bone strength at the knee (R 2= 0.146 in all patients; < 0.001 in osteoporosis group; 0.126 in non-osteoporosis group). The correlation suggested by the regression models was particularly insignificant in the osteoporosis subgroup, showing that central BMD is not a reliable predictor of bone strength for cementless TKA. Conclusions Central BMD measurements have limited utility in accurately predicting the real bone strength at the knee for cementless TKA. This study highlights the need for more specific and direct methods of assessing bone quality at the knee to ensure the success of cementless TKA.

Background: The increasing prevalence of cementless total knee arthroplasty (TKA) necessitates a reliable assessment of bone quality. Central bone mineral density (BMD), measured by dual-energy x-ray absorptiometry (DEXA) in the lumbar spine and hip, is conventionally used to estimate bone quality. However, its effectiveness in predicting the actual bone strength at the knee, which is crucial for cementless TKA, is under scrutiny. This study investigated the relationship between central BMD and actual bone strength at the knee. Methods: This prospective study included 191 knees undergoing standard posterior-stabilized TKA between November 2021 and March 2023. Central BMD was assessed 3 months before TKA, and the failure load of bone fragments collected during box preparation was directly measured using an indentation test. Relationships between central BMD and failure load as a measure of the actual bone strength at the knee were analyzed. Results: Linear regression analysis revealed a weak correlation between central BMD and the actual bone strength at the knee (R 2= 0.146 in all patients; < 0.001 in osteoporosis group; 0.126 in non-osteoporosis group). The correlation suggested by the regression models was particularly insignificant in the osteoporosis subgroup, showing that central BMD is not a reliable predictor of bone strength for cementless TKA. Conclusions Central BMD measurements have limited utility in accurately predicting the real bone strength at the knee for cementless TKA. This study highlights the need for more specific and direct methods of assessing bone quality at the knee to ensure the success of cementless TKA.

Purpose: Anterolateral minimally invasive plate osteosynthesis (MIPO) was performed to treat patients with distal tibial fractures associated with open fractures or extensive soft tissue injuries, which is limited medial MIPO. The treatment results of the anterolateral MIPO technique were evaluated and analyzed. Materials and Methods: Seventeen patients with distal tibial fractures associated with an open fracture or large bullae formation on the distal tibia medial side were treated with anterolateral MIPO using anterolateral locking plates. Within 24 hours of visiting the emergency room, external fixation was applied, and the medial side wound was managed. After damage control, the anterolateral locking plate was applied using an anterolateral MIPO technique. The union time, nonunion, or malunion were evaluated with regular postoperative radiographs. The ankle range of motion, operative time, blood loss, Iowa score, and wound complications were investigated. Results: Radiological evidence of bony union was obtained in all cases. The mean time to union was 16.7 weeks (12∼25 weeks). The mean operation time was 44.0 minutes. Regarding the ankle range of motion, the mean dorsiflexion was 15°, and the mean plantarflexion was 35°. Satisfactory results were obtained in 15 out of 17 cases; five results were classified as excellent, four were good, and six were fair. The mean blood loss was 125.2 mL. Two complications were recorded. Conclusion In distal tibial fractures with severe medial soft tissue damage caused by high-energy trauma, the staged anterolateral MIPO technique using anterolateral locking plates is a useful alternative treatment to achieving optimal wound care, rapid union with biological fixation, and intra-articular reduction.

BACKGROUND: This retrospective study was undertaken to evaluate mid-term clinical and radiological outcomes of lattisimus dorsi (LD) tendon transfer in patients with irreparable massive rotator cuff tears (MRCT). We hypothesize that LD tendon transfer would provide safe and satisfactory clinical outcomes at mid-term follow-up. METHODS: From November 2008 to December 2016, 23 patients (57.5 ± 4.4 years; 20 male, 3 female) who underwent LD tendon transfer for massive tears, were enrolled. Inclusion criteria were irreparable MRCT. Exclusion criteria included full thickness subscapularis tear, rotator cuff arthropathy, anterosuperior rotator cuff tear, and osteoarthritis. Mean follow-up period was 4.7 ± 4.0 years (range, 2–12 years). Clinical assessment (American Shoulder and Elbow Surgeons [ASES], University of California, Los Angeles [UCLA], Simple Shoulder Test [SST]) and radiographic assessment (osteoarthritis [OA], acromiohumeral distance [AHI]) were evaluated. RESULTS: ASES, UCLA and SST scores, and range of motion (ROM), except internal rotation, improved significantly at the last follow-up (p<0.05). Also, AHI was significantly improved at the last follow-up, from 6.6 mm to 8.2 mm (p=0.008). At the final follow-up, the radiologic stages of the glenohumeral osteoarthritis were determined as stage 1 in 9 patients, stage 2 in 10 patients, stage 3 in 2 patients, and stage 4 in 2 patients. Complications were observed in 21.7% cases: 3 re-tears and 2 infections were noted in our study. CONCLUSIONS LD tendon transfer for irreparable MRCT provides satisfactory clinical outcomes at mid-term follow-up. Mild degenerative osteoarthritis (stage 1, 2) of the shoulder joint are common at the mid-term follow-up. Also, complications such as tear, infection should be considered.