Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

OBJECTIVE: To evaluate the effect of manual acupuncture on endometrial blood flow parameters by three-dimensional (3D) power Doppler ultrasound in women undergoing in vitro fertilization embryo transfer (IVF-ET). METHODS: Seventy patients undergoing IVF-ET were equally randomized into traditional or sham acupuncture treatment group for totally 4 days (from the day of oocyte aspiration to the day of embryo transfer) of treatment by random envelope method at the Reproductive Medicine Center and Outpatient Department of Integrated Traditional Chinese and Western Medicine, Tongji Hospital, Tongji Medicine College, Huazhong University of Science and Technology from January 2013 to December 2015. Patients in the traditional acupuncture group accepted traditional acupuncture methods with manual acupuncture, and Zhongji (CV3), Qihai (CV 6), Sanyinjiao (SP6), Taichong (LR 3), Tianshu (ST 25), Guilai (ST 29) and Zusanli (ST 36) were chosen. Patients at the sham acupuncture group accepted shallow acupuncture methods at 4 non-meridian points at each shoulder and upper arm. Outcome measures included endometrial ultrasonic indices such as vascularization index (VI), flow index (FI) and vascularization flow index (VFI), endometrial thickness and volume, subendometrial VI (sVI), subendometrial FI (sFI), subendometrial VFI (sVFI), implantation rate, clinical pregnancy rate, abortion rate, live birth rate and number of live births. RESULTS: Finally, 34 patients in the traditional acupuncture group and 35 in the sham acupuncture group completed this trial. VI, FI and VFI of the traditional acupuncture group were significantly higher than those in the sham acupuncture group (P<0.05). No significant differences were found in endometrial thickness, endometrial volume, sVI, sFI, sVFI, implantation rate, clinical pregnancy rate, abortion rate, live birth rate and number of live births (P>0.05). CONCLUSIONS Manual acupuncture performed after oocyte aspiration and before transplantation improved the endometrial blood flow parameters VI, RI and VFI in women who underwent IVF-ET, instead of sVI, sFI and sVFI. Therefore, acupuncture might be beneficial in women undergoing IVF-ET by increasing endometrial blood flow and endometrial receptivity. (Registration No. ChiCTR2100053354).
Pregnancy ; Humans ; Female ; Fertilization in Vitro/methods* ; Single-Blind Method ; Embryo Transfer ; Pregnancy Rate ; Acupuncture Therapy ; Endometrium/blood supply*

Objective: To propose updates and amendments for the nitroglycerin tablets quality in the Chinese pharmacopoeia 2020 due to the failure of effective separation of 4 known impurities and nonseparation of free nitrate ion and excipients.
Methods: Related substances were analyzed using gradient elution by HPLC, and free nitrate ion was determined on SAX column by different HPLC method.
Results: Using the improved method to test the related substances and free nitrate ion of nitroglycerin tablets,the content of the maximum individual impurity were not more than 0.5%, the total content was not more than 2.4% and the content of free nitrate ion was not more than 6.3%.
Conclusion: The improved method is accurate and feasible. It provided a reference for the updates and amendments of the quality standard of nitroglycerin tablets in the Chinese Pharmacopoeia 2020.

Objective Lentivirus-mediated interference with synaptic nuclear protein γ(SNCG)in human oral squamous cell carcinoma was established to study the role of SNCG in the migration and invasion of oral squamous cell carcinoma.Methods Oral cancer CAL27 cells were infected with LV-shNC and LV-shSNCG constructed by lentivirus vector,respective,and then selected with puromycin to obtain cell lines stably interfering with SNCG,which were named NC group and experimental group,respectively.Detect the expression of SNCG through real-time quantitative polymerase chain reaction(qRT-PCR)and Western blot experiments;Transwell and scratch experiments were used to detect changes in migration and invasion ability.Results Compared with the NC group,the experimental group showed an 80％reduction in SNCG mRNA expression(P＜0.01).The relative expression level of SNCG protein was also decreased in the experimental group compared to the NC group(P＜0.01).In the NC group and the experimental group,the migration area percentages at 36 hours were 0.54±0.06 and 0.40±0.02,respectively;and at 48 hours were 0.83±0.01 and 0.47±0.05,respectively.The experimental group showed decrease in migration area compared to the NC group,and these differences were statistically significant(P＜0.05,P＜0.001).Compared to the NC group,the migration and invasion cell numbers in the experimental group(98.00±13.49 and 88.00±5.72)were significantly reduced to(48.00±2.16 and 49.00±2.94),and these differences were statistically significant(P＜0.01,P＜0.001).Conclusion Interference of SNCG expression can significantly reduce the migration and invasion ability of oral squamous cell carcinoma cells.

This article summarizes the domestic and international research progress of recombinant human follicle stimulating hormone(rFSH).According to relevant guidelines and application cases,the general requirements and common problems for non-clinical evaluation of rFSH are summarized.The clinical development prospects of long-acting rFSH products which is a hot research topic in recent years are analyzed and corresponding suggestions are given in order to provide reference for related work.

Objective This study aimed to investigate the potential relationship between urinary metals copper (Cu), arsenic (As), strontium (Sr), barium (Ba), iron (Fe), lead (Pb) and manganese (Mn) and grip strength. Methods We used linear regression models, quantile g-computation and Bayesian kernel machine regression (BKMR) to assess the relationship between metals and grip strength.Results In the multimetal linear regression, Cu (β=-2.119), As (β=-1.318), Sr (β=-2.480), Ba (β=0.781), Fe (β= 1.130) and Mn (β=-0.404) were significantly correlated with grip strength (P < 0.05). The results of the quantile g-computation showed that the risk of occurrence of grip strength reduction was -1.007 (95％ confidence interval:-1.362, -0.652; P < 0.001) when each quartile of the mixture of the seven metals was increased. Bayesian kernel function regression model analysis showed that mixtures of the seven metals had a negative overall effect on grip strength, with Cu, As and Sr being negatively associated with grip strength levels. In the total population, potential interactions were observed between As and Mn and between Cu and Mn (Pinteractions of 0.003 and 0.018, respectively).Conclusion In summary, this study suggests that combined exposure to metal mixtures is negatively associated with grip strength. Cu, Sr and As were negatively correlated with grip strength levels, and there were potential interactions between As and Mn and between Cu and Mn.