Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

ObjectiveTo develop a standardized living will manual suitable for promotion in China， combining existing literature and the current implementation status of living will both domestically and internationally as well as the characteristics of modern medicine. MethodsA pool of manual entries was constructed through hospital interviews and literature retrieval. A Delphi method expert correspondence was conducted to modify and supplement the manual entry settings. The results of the correspondence were statistically analyzed to verify the reliability and scientific validity of the manual and the correspondence. ResultsThis study constructed a pool of manual entries by conducting interviews in four hospitals in Beijing and retrieving and including 155 pieces of literature，and developed a preliminary version of the manual with a total of 40 entries in four sections， namely medicine， psychology， society， and farewell. The manual items were revised through two rounds of the Delphi method correspondence with a total of 88 experts. The expert response rates in the two rounds of the correspondence questionnaires were 100% and 90%， respectively； the expert authority coefficients were 0.84 and 0.865， respectively； and Kcndall W was 0.141 and 0.077， respectively. In terms of the reliability test， the Cronbach’s α coefficients of the two rounds of correspondence were 0.941 and 0.969， respectively， and the Guttman coefficients were 0.862 and 0.857， respectively. As for the validity test， the Pearson correlation coefficient for 39 entries was R>0.4 in the first round of correspondence， and for 41 entries was R>0.4 in the second round of correspondence； a total of 20 entries in the first round of correspondence had an I-CVI ≥ 0.780， and the scale’s S-CVI was 0.786； a total of 31 entries in the second round of correspondence had an I-CVI ≥ 0.780， and the scale’s S-CVI was 0.846. Meanwhile， this study developed a legal instrument section of the manual including personal information， effective time， modification and revocation， witnesses， and other contents by reviewing relevant laws and regulations both domestically and internationally. ConclusionThe standardized living will manual is comprehensive， reliable， and scientific， which makes it suitable for promotion and further improvement.

Objective To screen ferroptosis genes related to the prognosis of cervical cancer and to construct a prognosis model. Methods Ferroptosis genes were obtained from FerrDb database, and cervical cancer related data were obtained from The Genome-Wide Association Study Catalog database and The Cancer Genome Atlas database. Transcriptome-Wide Association Study, colocalization analysis and differential expression analysis were conducted to screen out candidate ferroptosis genes; Gene Ontology functional and Kyoto Encyclopedia of Genes and Genomes pathway enrichment analysis were conducted on candidate genes. Univariate Cox regression analysis was used to further screen out genes related to the prognosis of cervical cancer. Kaplan-Meier method was used to analyze the relationship between genes and the overall survival of patients. The expression levels of genes in pan-cancer were analyzed through the TIMER database. Two prognostic models were conducted, Model 1 included age and tumor stage, while Model 2 incorporated age, tumor stage, and prognostic genes. The predictive capabilities of the two models were compared. Results A total of 91 candidate genes related to ferroptosis were obtained. Univariate Cox regression analysis showed that 15 genes were associated with the prognosis of cervical cancer. CA9, SCD, TFRC, QSOX1 and CDO1 were risk factors affecting the prognosis of cervical cancer patients (P＜0.05), while PTPN6, ALOXE3, HELLS, IFNG, MIOX, ALOX12B, DUOX1, ALOX15, AQP3 and IDO1 were protective factors (P＜0.05). The mRNA expression levels of the 15 genes showed significant upregulation or downregulation in at least 7 types of cancers, among which TFRC was associated with the largest number of cancer types. Kaplan-Meier analysis showed that HELLS, DUOX1 and ALOXE3 were associated with poor prognosis in cervical cancer. The AUC of the model 1 for predicting 1-year and 3-year overall survival rates of cervical cancer patients was 0.455 and 0.478, and the AUC of Model 2 was 0.854 and 0.595. Model 2 (C-index = 0.727) had better predictive ability than Model 1 (C-index = 0.502). Conclusion The prognostic model composed of 15 prognostic-related genes selected based on bioinformatics has better predictive performance for the survival outcomes of cervical cancer patients, providing important reference value for the prognostic assessment of cervical cancer patients.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

ObjectiveTo investigate the influence of empagliflozin combined with donafenib or lenvatinib on the pharmacokinetic parameters of each drug， and to provide a reference for combined medication in clinical practice. MethodsA total of 48 healthy male Sprague-Dawley rats were divided into 8 groups： empagliflozin group 1 and 2， donafenib group， lenvatinib group， donafenib pretreatment+empagliflozin group， lenvatinib pretreatment + empagliflozin group， empagliflozin pretreatment+donafenib group， and empagliflozin pretreatment+lenvatinib group， with 6 rats in each group. The doses of empagliflozin， donafenib， and lenvatinib were 2.5 mg/kg， 40 mg/kg， and 1.2 mg/kg， respectively. The rats in the empagliflozin group， donafenib group， and lenvatinib group were given a blank solvent by gavage for 7 consecutive days， followed by a single dose of empagliflozin， donafenib， or lenvatinib on day 7 after the administration of the blank solvent； the rats in the pretreatment groups were given the pretreatment drug by gavage for 7 consecutive days， followed by a single dose of drug combination on day 7 after administration of the pretreatment drug. Blood samples were collected at different time points， and plasma was separated to measure the concentration of each drug. A validated ultra-performance liquid chromatography-tandem mass spectrometry method was used to measure the plasma concentrations of donafenib， lenvatinib， and empagliflozin， and a non-compartmental model was used to calculate the main pharmacokinetic parameters of each drug （area under the plasma concentration-time curve ［AUC］， time to peak ［T_max］， peak concentration ［C_max］， and half-life time ［t_1/2］）. The independent-samples t test was used for comparison of normally distributed continuous data between two groups， and the Mann-Whitney U test was used for comparison of non-normally distributed continuous data between two groups. ResultsCompared with the empagliflozin group， the donafenib pretreatment+empagliflozin group had significant increases in the AUC_0-t and AUC_0-∞ of empagliflozin （P=0.011 and 0.008）， while the lenvatinib pretreatment+empagliflozin group had no significant change in the AUC of empagliflozin， with a slightly shorter T_max （P=0.019）. Compared with the donafenib group， the empagliflozin pretreatment+donafenib group had significant increases in the AUC_0-t and AUC_0-∞ of donafenib （P=0.027 and 0.025）， as well as a significant increase in C_max （P=0.015） and significant reductions in CLz/F and Vz/F （P=0.005 and 0.004）； compared with the lenvatinib group， the empagliflozin pretreatment+lenvatinib group had a reduction in the t_1/2 of lenvatinib by approximately 5 hours （P=0.002）， with a trend of reduction in AUC_0-t （P0.05）. ConclusionEmpagliflozin combined with donafenib may alter the pharmacokinetic parameters of both drugs， leading to a significant increase in the exposure levels of both drugs， and efficacy and adverse reactions should be monitored during co-administration. There are no significant changes in the exposure levels of empagliflozin and lenvatinib during co-administration.

OBJECTIVE To investigate the factors influencing the changes in purchasing quantity in the procurement varieties of the first batch of volume-based drug centralized procurement （hereinafter referred to as centralized procurement）. METHODS Using 25 procurement varieties of the “4+7” policy as research objects， the changes in purchasing quantity of procurement varieties were analyzed before and after the implementation of the “4+7” pilot， renewal and expansion policies. The influential factors were determined from the three levels of drugs， medical institutions and regions； and the multiple linear regression model was used to analyze the influential factors for the changes in the purchasing quantity of procurement varieties. RESULTS Before and after the implementation of the “4+7” pilot， renewal and expansion policies， the purchasing quantity increased by 52.1， －0.2， 85.8 ten thousand DDDs on average， compared with base period. During pilot， renewal and expansion period， DDDc decrease in procurement varieties was positively correlated with the increase in purchasing quantity （P＜0.01）. During the pilot and renewal period， the number of absolutely alternative varieties was positively correlated with the increase in purchasing quantity （P＜0.1）. During the pilot and expansion period， the number of alternative varieties to a certain extent was negatively correlated with the increase in purchasing quantity （P＜0.05）. During the renewal period， the increment of purchasing quantity in tertiary hospitals was smaller than that of primary medical institutions （P＜0.05）. CONCLUSIONS There is a relationship between the decline of DDDc and the changes in the purchasing quantity， that is， the more the drug price dropped， the more the purchasing quantity increased. The number of alternative varieties for centralized procurement will affect the changes in their purchasing quantity， but it is not always stable. With the implementation of the policy， the volume of primary medical institutions gradually exceeds that of tertiary institutions， indicating that the consumption of centralized purchased varieties is transferred to the primary medical institutions， and centralized procurement has promoted the implementation of the hierarchical diagnosis and treatment system.

In this study, fluvoxamine maleate sustained-release pellet system tablets were prepared and were used to evaluate their release behaviors in vitro. Fluvoxamine maleate pellets were prepared using centrifugal-spherization method and coated by fluidized bed as bottom-spray. The multi-unit sustained-release pellets and appropriate excipients for prescription volumes were mixed uniformly and then compressed to tablets. Screening and determining the optimal formulation of drug loaded pellets through L8 (2⁴) Taguchi experiment. Using Minitab software to design a DOE experiment with 2⁴ partial factors, including material temperature, fan speed, atomization pressure, and spray rate to optimize the bottom spray coating process. Taking monostearate glycerol ester with a particle size of 24-40 mesh as the main diluent for tableting to relieve the delamination phenomenon between pellets and excipients during tablet pressing and reduce mechanical damage to the coating film. By examining the powder fluidity indexes such as angle of repose, bulk density, tapped density, and Hausner ratio of mixed particles, it was found that the flowability and compressibility are good and suitable for direct compression. Evaluate the basic properties of the sustained-release tablets, investigate the in vitro release behavior and study the release mechanism. The results of in vitro release test showed that the self-made sustained-release tablets could disintegrate into independent pellet units in phosphate buffer at pH 6.8 and release slowly within 24 h, which conformed to the first-order drug release model. The fluvoxamine maleate sustained-release pellet system tablets meet the requirements of preparation design and has a great commercial prospect.