This article reports a case of an orthodontic adolescent patient without a right inferior incisor. The right lower canine was used as the abutment. The single-retainer all-ceramic resin-bonded fixed partial denture was used to restore the complete dentition. Thus, the missing space was filled, and the function and aesthetics were restored.
Adolescent ; Ceramics ; Denture Design ; Denture, Partial, Fixed ; Denture, Partial, Fixed, Resin-Bonded ; Esthetics, Dental ; Humans ; Incisor

OBJECTIVE: This study aims to investigate the fracture resistance and short-term restorative effects of resin-bonded fixed partial dentures (RBFPDs) made from heat-pressed lithium-disilicate-based glass-ceramic (IPS e.max press) and zirconia ceramic (WIELAND) and retained by all-ceramic guiding plates when used to restore missing mandibular second premolars. METHODS: A total of 64 human mandibular first premolars and first molars were prepared as abutments, then were randomly divided into 4 groups (n=8): E0, heat-pressed ceramic RBFPDs, no cyclic loading; E1, heat-pressed ceramic RBFPDs exposed to 300 000 cycles of dynamic loading; W0, zirconia ceramic RBFPDs, no cyclic loading; and W1, zirconia ceramic RBFPDs exposed to 300 000 cycles of dynamic loading. Fracture strength was tested in a universal testing machine. RESULTS: The medians of fracture strength were 1 242.85 N±260.11 N (E0), 1 650.85 N±206.77 N (W0), 1 062.60 N±179.98 N (E1), and 1 167.61 N±265.50 N (W1). Statistical analysis showed that all the groups exhibited significantly higher fracture strength compared with the maximum bite force in the premolar region (360 N; P<0.001). The W0 group had significantly higher fracture strength than the E0 group (P<0.05). Meanwhile, no significant difference in fracture strength was observed between the E1 and W1 groups (P>0.05). Significant statistical differences were found between the zirconia ceramic groups (W0 and W1, P<0.05) but not between the glassceramic groups (E0 and E1, P>0.05) after dynamic loading. CONCLUSIONS The RBFPDs retained by all-ceramic guiding plates exhibited promising fracture properties and optimal short-term restorative effects when used to restore missing mandibular second premolars.
Bicuspid ; Ceramics ; Dental Porcelain ; Dental Restoration Failure ; Dental Stress Analysis ; Denture Design ; Denture, Partial, Fixed ; Denture, Partial, Fixed, Resin-Bonded ; Humans ; Materials Testing ; Zirconium

PURPOSE: Conventional resin-bonded fixed partial dentures (RBFPDs) are usually made with a two-retainer design. Unlike conventional RBFPDs, cantilever resin-bonded fixed partial dentures (Cantilever RBFPDs) are, for their part, made with a single-retainer design. The aim of this study was to compare the effect of tooth surface preparation on the bond strength of zirconia cantilever single-retainer RBFPDs. The objective is to evaluate the shear bond strength of these single-retainer RBFPDs bonded on 3 different amount of tooth surface preparation. MATERIALS AND METHODS: Thirty extracted bovine incisors were categorized to 3 groups (n=10), with different amounts of tooth surface preparations. Teeth were restored with single-retainer RBFPDs with different retainer surfaces: large retainer of 32 mm²; medium retainer of 22 mm²; no retainer and only a proximal connecting box of 12 mm². All RBFPDs were made of zirconia and were bonded using an adhesive system without adhesive capacity. Shear forces were applied to these restorations until debonding. RESULTS: Mean shear bond strength values for the groups I, II, and II were 2.39±0.53 MPa, 3.13±0.69 MPa, and 5.40±0.96 MPa, respectively. Statistical analyses were performed using a one-way ANOVA test with Bonferroni post-hoc test, at a significance level of 0.001. Failure modes were observed and showed a 100% adhesive fracture. CONCLUSION: It can be concluded that the preparation of large tooth surface preparation might be irrelevant. For zirconia single-retainer RBFPD, only the preparation of a proximal connecting box seems to be a reliable and minimally invasive approach. The differences are statistically significant.
Adhesives ; Denture, Partial, Fixed ; Denture, Partial, Fixed, Resin-Bonded ; Incisor ; Tooth

In the case of single tooth replacement, a fixed prosthesis or a dental implant is the treatment option commonly selected as first choice. However, any amount of sound tooth structure should be removed to prepare the abutment teeth for full coverage retainer. The adjacent tooth damage can be avoided placing a dental implant. However, depending on the patient's oral condition and any other circumstances, it may be impossible or delayed. In this case resin bonded fixed partial denture was selected as an alternative that can restore single tooth loss without much tooth structure removal to the young patients and the patients with gingival recession. We report these patients were satisfied with esthetic and function.
Dental Implants ; Denture, Partial, Fixed ; Denture, Partial, Fixed, Resin-Bonded ; Gingival Recession ; Humans ; Prostheses and Implants* ; Tooth Loss ; Tooth*

PURPOSE: The purpose of this study was to evaluate the microleakage of various types of resin-bonded fixed partial dentures (RBFPDs) after artificial aging. MATERIALS AND METHODS: Forty models with missing first molar were fabricated using artificial resin teeth and were divided into four groups: Group A, conventional RBFPDs design; Group B, modified RBFPDs design; Group C, assembled 3-piece RBFPDs design; and Group D, assembled 3-piece RBFPDs with different occlusal rest positions. Half of the specimens underwent chewing simulation process (240,000 cycles, 50 N load, 1.7 Hz) and thermocycling (temperatures 5℃~55℃, dwelling time 30 seconds) and the remaining 20 specimens didn't receive any treatment. All the specimens were immersed in 2% methylene blue solution for 24 hours to evaluate microleakage, and were sectioned at the middle part of abutment teeth. To evaluate the microleaskage, a dye penetration was calculated. RESULT: With artificial aging, cyclic loading and thermocycling, a 3-piece RBPFD and a 2-piece RBPFD using original tooth undercuts have significantly lower microleakge (P<0.05) compared to the conventional design of RBPFD and modified RBPFD. CONCLUSION: Within the limit of this experiment, the assembled RBFPDs exhibited a smaller microleakage than the conventional RBFPDs, implying that the assembled RBFPDs can be more effective for reducing the dislodgement of the RBFPDs.
Aging ; Denture, Partial, Fixed* ; Denture, Partial, Fixed, Resin-Bonded ; In Vitro Techniques* ; Mastication ; Methylene Blue ; Molar ; Tooth

OBJECTIVETo evaluate the clinical performance of glass fiber reinforced resin-bonded fixed partial denture(GFR-RBFPD) as a periodontal splint on abutment teeth with reduced periodontal support.

METHODSThirty fixed-fixed GFR-RBFPD were delivered to restore anterior partial edentulous dentitions. The adjacent abutment teeth had severely reduced periodontal support and were not indicated for full crown retained FPD. The success rate and functional survival rate had been recorded and the periodontal condition had been evaluated for 4 years. The results were statistically analyzed with single factor variance analysis and chi square test(α=0.05).

RESULTSIn the first, second, and third year following restoration, one connector fractured in each year and they were repaired with adhesive resin and the pontics were kept in place for function. In the third and fourth years after restoration, there was one pontic displacement with fracture of connectors. The total survive rate was 83%(25/30) and the functional survival rate was 93% (28/30) at the end of the fourth year. The main reason of failure was fracture of connector. About 22%(13/60) of the adjacent teeth showed marginal bone height decrease, while the other 78% (47/60) increased with statistic significant difference from one year after the restoration to the end of the observation term(P<0.05). The periodontal condition of the adjacent teeth was improved after the restoration.

CONCLUSIONSThe four years clinical evaluation indicates that the GFR-RBFPD may be used as fixed prostheses to replace lost one to three anterior teeth with reduced periodontal support of abutment teeth.

Composite Resins ; Dental Abutments ; Dental Restoration Failure ; statistics & numerical data ; Denture Design ; Denture Retention ; Denture, Partial, Fixed ; Denture, Partial, Fixed, Resin-Bonded ; Glass ; Humans ; Incisor ; Periodontal Splints ; Time Factors

PURPOSE: This study aimed to investigate whether dentin surface preparation with diamond rotary instruments of different grit sizes affects the shear bond strength of resin-bonded restorations. MATERIALS AND METHODS: The buccal enamel of 60 maxillary central incisors was removed with a low speed diamond saw and wet ground with silicon carbide papers. The polished surfaces of the teeth were prepared with four groups of rotary diamond burs with super-coarse (SC), coarse (C), medium (M), and fine (F) grit sizes. Following surface preparation, 60 restorations were casted with nickel-chromium alloy and bonded with Panavia cement. To assess the shear bond strength, the samples were mounted on a universal testing machine and an axial load was applied along the cement-restoration interface at the crosshead speed of 0.5 mm/min. The acquired data was analyzed with one way ANOVA and Tukey post hoc test (α=.05). RESULTS: The mean ± SD shear bond strengths (in MPa) of the study groups were 17.75 ± 1.41 for SC, 13.82 ± 1.13 for C, 10.40 ± 1.45 for M, and 7.13 ± 1.18 for F. Statistical analysis revealed the significant difference among the study groups such that the value for group SC was significantly higher than that for group F (P<.001). CONCLUSION: Dentin surface roughness created by diamond burs of different grit sizes considerably influences the shear bond strength of resin bonded restorations.
Alloys ; Dental Enamel ; Dental Instruments ; Dentin* ; Denture, Partial, Fixed, Resin-Bonded ; Diamond ; Incisor ; Shear Strength ; Silicon ; Tooth

OBJECTIVETo discuss the cause of food impaction after fixed denture restoration and to analyze the therapeutic effect of gap expansion and resin repair.

METHODSA total of 100 patients who suffered from food impaction after they received fixed partial denture were chosen. The cause of food impaction was analyzed. Treatment methods were applied on the basis of different causes. Gap expansion and resin repair were implemented to remove food impaction caused by the poor contact of the denture with healthy adjacent teeth.

RESULTSThe poor contact between fixed denture and healthy adjacent teeth was the major cause of food impaction (70%) . The effective rate of treatment among patients who received fixed partial denture but suffered from food impaction after 3 years was 100%.

CONCLUSIONSThe proposed method can be applied to treat food impaction caused by the poor contact of denture with healthy adjacent teeth.

Denture Design ; Denture, Partial, Fixed, Resin-Bonded ; Food ; Humans

Loss of anterior tooth impairs patients physically and emotionally as well as presents a challenge for dentists. This article presented a method of replacing one anterior tooth that was extracted because of periodontitis. The proposed method involves the use of the natural crown as pontic with fiber-reinforced composite resin-bonded fixed partial denture.
Composite Resins ; Denture Design ; Denture, Partial, Fixed ; Denture, Partial, Fixed, Resin-Bonded ; Humans ; Maxilla ; Mouth, Edentulous

OBJECTIVETo observe a short-term clinical result of modified resin-bonded fixed partial denture(MRBFPD) utilizing tooth undercuts.

METHODSOne hundred and twenty-nine patients received restoration and totally 196 missing teeth were restored with 148 MRBFPD. According to the positions of abutments in the dental arch, all the MRBFPD were divided into three groups, namely anterior prostheses (40), posterior prostheses (95) and prostheses spanning anterior and posterior (13). The prostheses were examined at 2 weeks, 1 month, 3 months, 6 months, and every year after denture delivery. Retention and marginal integrity of MRBFPD, sensibility, secondary caries and gingival bleeding index were clinically evaluated. The evaluation results were graded as good, acceptable, and bad according to modified United States Public Health service (USPHS) criteria. Survival in this study was defined at two levels: "complete" survival (survival without any debonding), and "functional" survival (survival including loss of retention on one occasion and successful rebonding of the original MRBFPD without further debonding).

RESULTSThe average follow-up period was 26 months. Fifteen prostheses failed and were rated as bad with USPHS criteria, and ten prostheses were evaluated as "acceptable" because the gingival bleeding index has been rated as 3 or more at one appointment but reduced to 1 or 0 after treatment. The results of the other 123 prostheses were evaluated as "good". The "complete" survival rates were 80% (32/40) for anterior prostheses, 11/13 for prostheses spanning anterior and posterior, and 95% (90/95) for posterior prostheses, while the "functional" survival rates were 80% (32/40), 11/13 and 99% (93/95) respectively. The "complete" survival rate of posterior prostheses was statistically higher than that of anterior prostheses (χ(2) = 5.433, P < 0.05). The "functional" survival rate of posterior prostheses was not only higher than that of anterior prostheses (χ(2) = 13.179, P < 0.01)but also higher than that of prostheses spanning anterior and posterior (χ(2) = 4.143, P < 0.05) statistically.

CONCLUSIONSThe results of this preliminary study suggest that short term survival rate of MRBFPD in posterior area was statistically better than that in anterior area. The outstanding advantage of MRBFPD is the minimum need of dental tissue reduction. However, their long-term success needs further investigation.

Adult ; Aged ; Aged, 80 and over ; Dental Restoration Failure ; Denture Design ; Denture Retention ; Denture, Partial, Fixed, Resin-Bonded ; Female ; Follow-Up Studies ; Humans ; Male ; Middle Aged ; Tooth Loss ; therapy ; Young Adult