Dentofacial deformities secondary to condylar hyperplasiais a kind of disease presenting facial asymmetry, malocclusion, temporomandibular joint dysfunction, and other symptoms caused by non-neoplastic hyperplasia of the condyle. The etiology is still unknown, and currently, pre- and post-operative orthodontics accompanied by orthognathic surgery, temporomandibular joint surgery and jawbone contouring surgery are the main treatment methods. A personalized treatment plan was developed, considering the active degree of condyle hyperplasia, the severity of the jaw deformity, and the patient's will, to correct deformity, obtain ideal occlusal relationship, and regain good temporomandibular joint function. Combined with the author's clinical experience, the etiology, clinical and imageological features, treatment aims, and surgical methods of condylar hyperplasia and secondary dentofacial deformities were discussed in this paper.
Humans ; Dentofacial Deformities/pathology* ; Hyperplasia/pathology* ; Mandibular Condyle/surgery* ; Orthognathic Surgical Procedures ; Temporomandibular Joint/surgery*

Treating dentofacial deformities secondary to condylar resorption is a remarkable clinical challenge. Combined orthodontic treatment and orthognathic surgery is currently the main treatment scheme and is often integrated with temporomandibular joint surgery or conservative treatment according to the severity of condylar resorption. This paper discussed the etiology, clinical features, imaging features, treatment options, and prophylaxis of condylar resorption.
Bone Resorption ; Dentofacial Deformities ; Humans ; Mandibular Condyle ; Orthognathic Surgery ; Orthognathic Surgical Procedures ; Temporomandibular Joint

BACKGROUND: Fibrous dysplasia (FD) is characterized by the replacement of normal bone by abnormal fibro-osseous connective tissue and typically treated with surgical contouring of the dysplastic bone. When dysplastic lesions involve occlusion, not only is surgical debulking needed, orthognathic surgery for correction of dentofacial deformity is mandatory. However, the long-term stability of osteotomized, dysplastic bone segments is a major concern because of insufficient screw-to-bone engagement during surgery and the risk of FD lesion re-growth. CASE PRESENTATION: This case report reviewed two patients with non-syndromic FD that presented with maxillary occlusal canting and facial asymmetry. Le Fort I osteotomy with recontouring of the dysplastic zygomaticomaxillary region had been performed. The stability of osseous segments were favorable. However, dysplastic, newly formed bone covered the previous plate fixation site and mild bony expansion was observed, which did not influence the facial profile. Including the current cases, 15 cases of orthognathic surgery for FD with dentition have been reported in the literature. CONCLUSION: The results showed that osteotomy did not appear to significantly reduce the long-term stability of the initial fixation insufficiency of the screw to the dysplastic bone. However, based on our results and those of the others, long-term follow-up and monitoring are needed, even in cases where the osteotomized segment shows stable results.
Connective Tissue ; Dentition ; Dentofacial Deformities ; Facial Asymmetry ; Follow-Up Studies ; Humans ; Orthognathic Surgery ; Osteotomy

BACKGROUND: The Le Fort I osteotomy is one of the most widely used and useful procedure to correct the dentofacial deformities of the midface. The changes of the maxilla position affect to overlying soft tissue including the nasal structure. Postoperative nasal septum deviation is a rare and unpredicted outcome after the surgery. There are only a few reports reporting the management of this complication. CASE PRESENTATION: In our department, three cases of the postoperative nasal septum deviation after the Le Fort I osteotomy had been experienced. Via limited intraoral circumvestibular incision, anterior maxilla, the nasal floor, and the anterior aspect of the septum were exposed. The cartilaginous part of the nasal septum was resected and repositioned to the midline and the anterior nasal spine was recontoured. Alar cinch suture performed again to prevent the sides of nostrils from flaring outwards. After the procedure, nasal septum deviation was corrected and the esthetic outcomes were favorable. CONCLUSION: Careful extubation, intraoperative management of nasal septum, and meticulous examination of pre-existing nasal septum deviation is important to avoid postoperative nasal septum deviation. If it existed after the maxillary osteotomy, septum repositioning technique of the current report can successfully correct the postoperative septal deviation.
Dentofacial Deformities ; Maxilla ; Maxillary Osteotomy ; Nasal Septum ; Osteotomy* ; Spine ; Sutures

BACKGROUND: The dimensions and shape of the forehead determine the esthetics of the upper third of the face. Korean young people consider a broad and smooth, rounded forehead more attractive. As a result, frontal augmentation becomes more popular in patients with dentofacial deformities. Various surgical procedures and materials have been used in frontal augmentation surgery, with associated advantages and disadvantages. Silicone is a good candidate for frontal augmentation. The author presents two cases of esthetic frontal augmentation with a prefabricated silicone implant in female patients with dentofacial deformities. CASE PRESENTATION: In case 1, a 24-year-old female patient underwent frontal augmentation surgery with simultaneous maxillomandibular and zygomatic osteotomies to correct facial asymmetry. A silicone implant was fabricated preoperatively using a positive template stone mold of her forehead. In case 2, a 23-year-old female patient underwent total facial contouring surgery including frontal augmentation for improved facial esthetics. A computed tomography (CT)-guided rapid prototype (RP) model was used to make the silicone implants. The operative procedure was safe and simple, and the silicone implants were reliable for a larger degree of frontal augmentation. Six months later, both patients had recovered from the surgery and were satisfied with their frontal shape and projection. CONCLUSIONS: Frontal augmentation with silicone implants can be an effective adjuvant strategy to improve facial esthetics in patients with a flat and narrow forehead who undergo orthognathic reconstruction or total facial contouring surgery.
Dentofacial Deformities ; Esthetics ; Facial Asymmetry ; Female ; Forehead ; Fungi ; Humans ; Osteotomy ; Silicon ; Silicones ; Surgical Procedures, Operative ; Young Adult

OBJECTIVE: The aim of this study was to evaluate the facial dimensions of young adult women with a preferred facial appearance and compare the results with those from the general population. METHODS: Twenty-five linear, nine angular, and three area measurements were made and four ratios were calculated using a sample of standardized frontal and lateral photographs of 46 young adult women with a preferred facial appearance (Miss Korea group) and 44 young adult women from the general population (control group). Differences between the two groups were analyzed using multivariate analysis of variance (MANOVA). RESULTS: Compared with the control group, the Miss Korea group exhibited a significantly greater facial height, total facial height (TFH; trichion-menton), facial width (tragus right-tragus left), facial depth (tragus-true vertical line), and trichion-nasion/TFH ratio and smaller subnasale-menton/TFH and facial width/TFH ratios. Furthermore, the control group had smaller intercanthal and interpupillary widths. CONCLUSIONS: The Miss Korea group exhibited longer, wider, and deeper faces compared with those from the general population. Furthermore, the Miss Korea group had larger eyes, longer but less protruded noses, longer and more retruded lower lips and chins, larger lip vermilion areas, and smaller labiomental angles. These results suggest that the latest trends in facial esthetics should be considered during diagnosis and treatment planning for young women with dentofacial abnormalities.
Chin ; Dentofacial Deformities ; Diagnosis ; Esthetics ; Female ; Humans ; Korea ; Lip ; Multivariate Analysis ; Nose ; Young Adult*

Management of temporomandibular joint (TMJ) ankylosis is challenging for the oral and maxillofacial surgeon because it involves the mouth opening, dentofacial deformity, diet problem, and quality of life. Although surgical techniques to treat TMJ ankylosis have improved, reankylosis is a persistent problem. The temporalis myofascial flap provides good material for interpositional arthroplasty, because of its good vascular supply, anatomic proximity, and adequate thickness. This case report examines the efficacy of submandibular anchorage to prevent reankylosis by inhibiting flap dislocation.
Ankylosis ; Arthroplasty ; Dentofacial Deformities ; Diet ; Dislocations ; Mouth ; Quality of Life ; Temporomandibular Joint*

OBJECTIVE: The aim of this study was to assess artifacts induced by metallic restorations in three-dimensional (3D) dental surface models derived by cone-beam computed tomography (CBCT). METHODS: Fifteen specimens, each with four extracted human premolars and molars embedded in a plaster block, were scanned by CBCT before and after the cavitated second premolars were restored with dental amalgam. Five consecutive surface models of each specimen were created according to increasing restoration size: no restoration (control) and small occlusal, large occlusal, disto-occlusal, and mesio-occluso-distal restorations. After registering each restored model with the control model, maximum linear discrepancy, area, and intensity of the artifacts were measured and compared. RESULTS: Artifacts developed mostly on the buccal and lingual surfaces. They occurred not only on the second premolar but also on the first premolar and first molar. The parametric values increased significantly with increasing restoration size. CONCLUSIONS: Metallic restorations induce considerable artifacts in 3D dental surface models. Artifact reduction should be taken into consideration for a proper diagnosis and treatment planning when using 3D surface model derived by CBCT in dentofacial deformity patients.
Artifacts* ; Bicuspid ; Cone-Beam Computed Tomography* ; Dental Amalgam ; Dentofacial Deformities ; Diagnosis ; Humans ; Molar

A 28-year-old male patient with right maxillar, zygomatic arch, orbital wall, and nasal bone fractures had an orthognathic and nasal surgery. Naso-endotracheal intubation is the first choice during surgical correction of dentofacial deformities in an orthognathic surgery; however, its presence can interfere with concomitant surgical procedures on the nose. Traditionally, the naso-endotracheal tube will be removed and replaced with an oro-endotracheal tube. We changed the endotracheal tube from nasal to oral by using an airway exchange catheter.
Adult ; Catheters* ; Dentofacial Deformities ; Humans ; Intubation ; Male ; Nasal Bone ; Nasal Surgical Procedures* ; Nose ; Orbit ; Orthognathic Surgery ; Zygoma

OBJECTIVE: The purpose of this study was to assess new three-dimensional (3D) cephalometric variables, and to evaluate the relationships among skeletal and dentoalveolar variables through 3D cephalometric analysis. METHODS: Cone-beam computed tomography (CBCT) scans were acquired from 38 young adults (18 men and 20 women; 22.6 +/- 3.2 years) with normal occlusion. Thirty-five landmarks were digitized on the 3D-rendered views. Several measurements were obtained for selected landmarks. Correlations among different variables were calculated by means of Pearson's correlation coefficient values. RESULTS: The body of the mandible had a longer curve length in men (102.3 +/- 4.4 mm) than in women (94.5 +/- 4.7 mm) (p < 0.001), but there was no significant difference in the maxillary basal curve length. Men had significantly larger facial dimensions, whereas women had a larger gonial angle (117.0 +/- 4.0 vs. 113.8 +/- 3.3; p < 0.001). Strong-to-moderate correlation values were found among the vertical and transverse variables (r = 0.71 to 0.51). CONCLUSIONS: The normative values of new 3D cephalometric parameters, including the maxillary and mandibular curve length, were obtained. Strong-to-moderate correlation values were found among several vertical and transverse variables through 3D cephalometric analysis. This method of cephalometric analyses can be useful in diagnosis and treatment planning for patients with dentofacial deformities.
Adult ; Cone-Beam Computed Tomography ; Dentofacial Deformities ; Female ; Humans ; Male ; Mandible ; Young Adult