PURPOSE: This study evaluated the usability of and satisfaction with two types of computer-aided design (CAD) software among users who had experience with dental implant CAD software and those who did not. MATERIALS AND METHODS: Dental technicians (n = 20) who had previous experience with dental implant CAD Software and students from the College of Dentistry (n = 12) who had never designed implant custom abutments were asked to evaluate two types of CAD Software, Exocad and Deltanine. In addition, the participants were asked to fill out a structured questionnaire (Section 1: Entering basic information and retrieving files; Section 2: Setting conditions before abutment design; Section 3: Setting abutment design; and Section 4: Overall satisfaction). For the statistical analysis of the collected data, Mann-Whitney U test was used (α = .05). RESULTS: The ease of design and satisfaction with the implant CAD Software, evaluated with respect to 21 statements divided into four Stages, were significantly higher for Exocad in both groups for Secion 1. For Sections 2 and 3, participants with experience evaluated Deltanine to be significantly better. For Section 4, both groups evaluated Exocad Software to be better. CONCLUSION: Overall, the Exocad Software was evaluated as having better usability and offering greater satisfaction. However, in terms of performance in the core of the design process, i.e. Sections 2 and 3, Deltanine was rated higher by the experienced users. Thus, if the user interface design parts are supplemented, Deltanine CAD Software could be put to a wider use in clinics.
Computer-Aided Design ; Dental Implants ; Dental Technicians ; Dentistry ; Humans

PURPOSE: Recently, according to the development of digital technology, computer aided design/computer aided manufacture (CAD/CAM) system is widely used for fabrication of various dental prostheses in the field of dentistry. This study aims to survey the present state and awareness of CAD/CAM system on domestic dental field, and to supply the advice for the application of the new system. MATERIALS AND METHODS: In this questionnaire survey was conducted for a total of 298 dentists, dental hygienist and dental technicians of the whole country including the dental hospital of Seoul National University for two months from November to December, 2016 through mail. RESULTS: The most important purpose to consider when purchasing a dental CAD/CAM milling machine were the performance of the milling machine (64.43%) and the use of milling machine was the highest with 49.33% of manufacturing for dental prosthesis and customized implant abutment. In addition, more than 60% of respondents answered positively about the purchase of new milling machine if the CAD/CAM milling machine was improved to satisfactory performance. CONCLUSION: This survey results show that the improved CAD/CAM milling machine would be play an important role in the dental industry in preparation for digitization and the 4th industrial revolution.
Dental Hygienists ; Dental Prosthesis ; Dental Technicians ; Dentistry ; Dentists ; Humans ; Postal Service ; Seoul ; Surveys and Questionnaires

PURPOSE: Increasing use of computer aided design-computer aided manufacturing (CAD-CAM) system and number of design software made design of restoration easy and quick. Outcome of restoration has been dependent on dental technician's wax up proficiency, dentists can design restoration for themselves now. This study aims to investigate the outcome of restoration designs, according to handling skill of CAD-CAM design tool. MATERIALS AND METHODS: A patient's mandibular right 1st molar was prepared. After taking impression, stone model was made, scanned the stone model with 3 shape intra-oral scanner, stereolithography (STL) file was extracted. With 3shape dental designer, one dental technician with more than 5 years work experience (designer 0) and three dental technicians with less than 2years work experience (designer 1, 2, 3-group DT) and 4 1st year residents (designer 4, 5, 6, 7-group RT) designed gold crown on the same STL file. Designed crown's MD (mesio-distal) and BL (bucco-lingual) diameter, height of crown, inter-cuspal distance, number of occlusal contact points were compared. Statistical analysis was carried out, test of normality within each group, using independent t-test. Number of contact points were compared, using Wilcoxon signed-rank test. RESULTS: There was no significant difference between group DT and group RT. Number of contact points also resulted in no significant difference. CONCLUSION: The outcome of each designed crowns showed no statistical differences, in values which can be expressed as numbers. Subjective factors were different. With increasing proficiency in handling designing software, fabrication of restorations according to each designer's occlusal concept can be made easy.
Computer-Aided Design* ; Crowns* ; Dental Technicians ; Dentists ; Humans ; Molar ; Occupational Groups*

PURPOSE: The aim of this study was to assess the degree of awareness and actual practice of dental practitioners regarding infection control during prosthodontic treatment. MATERIALS AND METHODS: Study participants were composed of dentists, dental hygienists, dental technicians working at dental university hospital, general hospital, dental hospital and dental clinics in Daejeon, Korea (n=126). The questionnaires included the data on general characteristics, education, awareness and practice of infection control procedures during prosthodontic treatment through personal self-administration survey. Awareness and practice were measured by Likert scale ranging from 1 to 5. Statistical analysis was done by one-way ANOVA. Influence of awareness on practice was estimated by regression analysis. RESULTS: 27.7% of the respondents answered that the infection control education regarding prosthodontic treatment is insufficient. The mean value of awareness and practice of infection control during the prosthodontic treatment were 2.72 +/- 0.80, 1.58 +/- 0.88, respectively. The mean value of practice who answered that had education curriculum at college was 1.62 +/- 0.9, and 1.31 +/- 0.49 who did not. The mean value of awareness who equipped guideline was 3.01 +/- 0.9, and 2.56 +/- 0.70 who did not. CONCLUSION: 1. The respondents who received the infection control education by college curriculum showed higher degree of practice than the respondents who did not. 2. The respondents who have appropriate infection control guidebook in their workplace showed higher degree of awareness than the respondents who did not. 3. There was a correlation between the awareness and practice of infection control during prosthodontic treatment; the degree of awareness becomes higher, so does the degree of practice. 4. During the prosthodontic treatment, the degree of practice was lower than the degree of awareness on infection control.
Analysis of Variance ; Curriculum ; Surveys and Questionnaires ; Dental Clinics ; Dental Hygienists ; Dental Technicians ; Dentists ; Education ; Hospitals, General ; Humans ; Infection Control* ; Korea ; Prosthodontics* ; Regression Analysis

To achieve an esthetic restoration, visualized information considering the facial aspect of patient is required. As for the reasons of esthetic failure, it could be explained by lack of communication and information such as horizontal, vertical and esthetic line. Therefore, it is important to deliver that the visualized information to dental technicians or other dentists for the success of esthetic treatment. This case report presents the process of visualizing esthetic information and designing the restoration using a digital diagnostic tool; Digital Smile Design.
Dental Technicians ; Dentists ; Humans

PURPOSE: The purpose of this study was to measure the tightening torque for dental implant in dental laboratory and to analyze of the effects of different tightening torque. MATERIALS AND METHODS: The tightening torque for dental implant in dental laboratory were measured by digital torque gauge. The length of abutment and analog were measured as tightening torque of manufacturer's instructions and the measured value. And the data were statically analyzed. RESULTS: The mean tightening torque of implant screw in dental laboratory was 1.563 +/- 0.332 Ncm. The external type implant system of total length were showing no significant differences but the internal type implant system had difference significant (P < 0.05) when compared with tightening torque. CONCLUSION: The implant prosthesis should be made under manufacturer's instructions especially as tightening torque of screw. For the fidelity of implant prosthesis, dental technician should learn how to use the torque gauge.
Dental Implants ; Dental Prosthesis ; Dental Technicians ; Humans ; Laboratories, Dental* ; Prostheses and Implants ; Torque*

Occupational lung diseases are caused by several toxic substances including heavy metals; however, the exact pathologic mechanisms remain unknown. In the workplace, dental technicians are often exposed to heavy metals such as cobalt, nickel, or beryllium and occasionally develop occupational lung diseases. We described a case of occupational lung disease in a patient who was employed as a dental technician for over a decade. A 31-year-old, non-smoking woman presented with productive cough and shortness of breath of several weeks duration. Chest computed tomography revealed a large number of scattered, bilateral small pulmonary nodules throughout the lung field, and multiple mediastinal lymph nodes enlargement. Percutaneous needle biopsy showed multifocal small granulomas with foreign body type giant cells suggestive of heavy metals inhalation. The patient's condition improved on simple avoidance strategy for several months. This case highlighted the importance of proper workplace safety.
Adult ; Beryllium ; Biopsy, Needle ; Cobalt ; Cough ; Dental Technicians* ; Dyspnea ; Female ; Foreign Bodies* ; Giant Cells, Foreign-Body ; Granuloma ; Humans ; Inhalation ; Lung ; Lung Diseases ; Lymph Nodes ; Metals, Heavy ; Nickel ; Thorax

BACKGROUND: The purpose of this study is to analyze the cost for the denture treatment in accordance with the government's plan to expand the National Health Insurance coverage for dental prothesis from July 1, 2012. METHODS: We developed the draft of classification of the treatment activities based on the existing researches and expert's review and finalized the standard procedures through confirming by Korean Dental Association. We also made the list of input at each stage of treatments. We conducted survey of 100 dental clinics via post from April 4 to May 20 in 2011 and 37 clinics took part in the survey. The unit of cost calculation is the process from the first visit for denture treatment to setting of denture and adjustment. The manufacturing process performed by dental technician was not included in the cost analysis. RESULTS: The process for the complete denture treatment was classified with 10 stages. The partial denture treatment was classified with 8 stages. The treatment time per each denture is about 5.6 hours for complete dentures and about 6.6 hours for partial dentures. The treatment cost were from 591,108 won to 643,913 won for complete denture and from 670,219 won to 738,840 won for partial denture in 2011, depending on the location, type of the clinics and the types of physician's income. CONCLUSION: This study shows the example of cost analysis for the treatment to set the fee schedule. Measures to get representative and accurate information need to be made.
Classification ; Costs and Cost Analysis* ; Dental Clinics* ; Dental Technicians ; Denture, Complete ; Denture, Partial ; Dentures* ; Fee Schedules ; Health Care Costs ; Humans ; Korea* ; National Health Programs

OBJECTIVES: Dental technicians are exposed to methyl methacrylate(MMA) and hard metal dusts while working, and several cases of hypersensitivity pneumonitis caused by the exposure have been reported. The authors experienced a case of hypersensitivity pneumonitis in a female dental technician who had 10 years' work experience and report the case with clinical evidence. METHOD: The patient's work, personal, social, and past and present medical histories were investigated based on patient questioning and medical records. Furthermore, the workplace conditions and tools and materials the patient worked with were also evaluated. Next, the pathophysiology and risk factors of pneumonitis were studied, and studies on the relationship between hypersensitivity pneumonitis and a dental technician's exposure to dust were reviewed. Any changes in the clinical course of her disease were noted for evaluation of the work-relatedness of the disease. RESULTS: The patient complained of cough and sputum for 1 year. In addition, while walking up the stairs, the patient was not able to ascend without resting due to dyspnea. She visited our emergency department due to epistaxis, and secondary hypertension was incidentally suspected. Laboratory tests including serologic, electrolyte, and endocrinologic tests and a simple chest radiograph showed no specific findings, but chest computed tomography revealed a centrilobular ground-glass pattern in both lung fields. A transbronchial biopsy was performed, and bronchoalveolar washing fluid was obtained. Among the findings of the laboratory tests, microcalcification, noncaseating granuloma containing foreign body-type giant cells, and metal particles within macrophages were identified histologically. Based on these results, hypersensitivity pneumonitis was diagnosed. The patient stopped working due to admission, and she completely quit her job within 2 months of restarting work due to reappearance of the symptoms. CONCLUSION: In this study, the patient did not have typical radiologic findings, but pathological evaluation of the lung biopsy from the bronchoscope led to the suspicion of pneumonitis. Under the microscope, the sample contained fibrotic changes in the lung, multinucleated giant cells, and particles in macrophages and was diagnosed as dental technician pneumoconiosis by the pathology. Working as a dental technician had directly exposed her to light metal dust and MMA, and her clinical symptoms and radiologic findings subsided after withdrawal from exposure to the workplace. These outcomes led to the diagnosis of hypersensitity pneumonitis due to MMA exposure and strong work-relatedness.
Alveolitis, Extrinsic Allergic* ; Biopsy ; Bronchoscopes ; Cough ; Dental Technicians* ; Diagnosis ; Dust ; Dyspnea ; Emergencies ; Epistaxis ; Female* ; Giant Cells* ; Giant Cells, Foreign-Body ; Glycogen Storage Disease Type VI ; Granuloma ; Humans ; Hypersensitivity* ; Hypertension ; Lung ; Macrophages ; Medical Records ; Pathology ; Pneumoconiosis ; Pneumonia ; Radiography, Thoracic ; Risk Factors ; Sputum ; Thorax ; Walking

OBJECTIVES: Dental technicians are exposed to various toxic materials in the workplace. The objectives of this study were to assess the pulmonary function of dental technicians and to evaluate the association between work-related factors and pulmonary function of dental technicians. METHODS: Study subjects were 209 dental technicians in the Korean Dental Technologist Association. A self-report questionnaire including general characteristics, respiratory symptoms, and work-related characteristics was conducted on study subjects, and a pulmonary function test (PFT) was done. Study subjects were classified into two groups(normal and abnormal pulmonary function) based on the pulmonary function test (PFT). RESULTS: 43 subjects (20.6%) among 209 subjects had abnormal pulmonary function. After adjusting for general characteristics such as age, sex, past medical history, familial history, and smoking status, the odds ratio for work duration (per year) was 1.42(95% confidence interval (CI) 1.14~1.83). After adjusting for general and work-related characteristics, the odds ratio for work duration (per year) was 1.48(95% CI 1.18~1.92). CONCLUSIONS: Dental technicians are exposed to hazardous materials, which might lead to abnormal pulmonary function. A long work duration could increase exposure time, thereby increasing the chance for abnormal pulmonary function. Therefore, pulmonary function tests should be carried out periodically in dental technicians to ensure their pulmonary health.
Dental Technicians ; Dietary Sucrose ; Hazardous Substances ; Humans ; Odds Ratio ; Questionnaires ; Respiratory Function Tests ; Smoke ; Smoking