To address the controversial issue of the toxicity of dental alloys and silver nanoparticles in medical applications, an in vivo-like LO2 3-D model was constructed within polyvinylidene fluoride hollow fiber materials to mimic the microenvironment of liver tissue. The use of microscopy methods and the measurement of liver-specific functions optimized the model for best cell performances and also proved the superiority of the 3-D LO2 model when compared with the traditional monolayer model. Toxicity tests were conducted using the newly constructed model, finding that four dental castings coated with silver nanoparticles were toxic to human hepatocytes after cell viability assays. In general, the toxicity of both the castings and the coated silver nanoparticles aggravated as time increased, yet the nanoparticles attenuated the general toxicity by preventing metal ion release, especially at high concentrations.
Cells, Cultured ; Dental Casting Technique ; Hepatocytes/drug effects* ; Humans ; Metal Nanoparticles/toxicity* ; Silver/toxicity* ; Toxicity Tests

OBJECTIVE: To explore a cone beam computed tomography (CBCT)-independent method for mandibular digital dental cast superimposition to evaluate three-dimensional (3D) mandibular tooth movement after orthodontic treatment in adults, and to evaluate the accuracy of this method. METHODS: Fifteen post-extraction orthodontic treatment adults from the Department of Orthodontics, Peking University School and Hospital of Stomatology were included. All the patients had four first premolars extracted, and were treated with straight wire appliance. The pre- and post-treatment plaster dental casts and craniofacial CBCT scans were obtained. The plaster dental casts were transferred to digital dental casts by 3D laser scanning, and lateral cephalograms were created from the craniofacial CBCT scans by orthogonal projection. The lateral cephalogram-based mandibular digital dental cast superimposition was achieved by sequential maxillary dental cast superimposition registered on the palatal stable region, occlusal transfer, and adjustment of mandibular rotation and translation obtained from lateral cephalogram superimposition. The accuracy of the lateral cephalogram-based mandibular digital dental cast superimposition method was evaluated with the CBCT-based mandibular digital dental cast superimposition method as the standard reference. After mandibular digital dental cast superimposition using both methods, 3D coordinate system was established, and 3D displacements of the lower bilateral first molars, canines and central incisors were measured. Differences between the two superimposition methods in tooth displacement measurements were assessed using the paired t-test with the level of statistical significance set at P<0.05. RESULTS: No significant differences were found between the lateral cephalogram-based and CBCT-based mandibular digital dental cast superimposition methods in 3D displacements of the lower first molars, and sagittal and vertical displacements of the canines and central incisors; transverse displacements of the canines and central incisors differed by (0.3±0.5) mm with statistical significance. CONCLUSION The lateral cephalogram-based mandibular digital dental cast superimposition method has the similar accuracy as the CBCT-based mandibular digital dental cast superimposition method in 3D evaluation of mandibular orthodontic tooth displacement, except for minor differences for the transverse displacements of anterior teeth. This method is applicable to adult patients with conventional orthodontic treatment records, especially the previous precious orthodontic data in the absence of CBCT scans.
Adult ; Bicuspid ; Cephalometry ; Cone-Beam Computed Tomography ; Dental Casting Technique ; Humans ; Imaging, Three-Dimensional ; Malocclusion ; Mandible/diagnostic imaging* ; Maxilla ; Models, Dental ; Molar ; Palate ; Tooth Movement Techniques

Provisional restoration plays an important role in the process of restoration with fixed partial denture by providing protection and restoring function and esthetics of abutment tooth. This is especially true in patients requiring use of provisional prosthesis for a long term. However, such situations may lead to higher possibility of provisional prosthesis fracture, and if expected so, reinforcement of provisional prosthesis should be considered. In this article, a patient requiring prosthetic treatment with increase of vertical dimension of occlusion was introduced. Due to increased vertical dimension of occlusion, the provisional restoration was expected to withstand relatively larger amount of load during a relatively long observation period. In order to minimize possible occurrence of fracture, reinforcement of the provisional restoration was sought by insertion of cast-metal framework and by using bis-acryl resin. The reinforced provisional restoration showed satisfactory results during the observation period of 4 months.
Acrylic Resins ; Dental Casting Technique ; Denture, Partial, Fixed ; Esthetics ; Humans ; Prostheses and Implants ; Tooth ; Vertical Dimension

PURPOSE: The objective of this study was to compare the accuracy of digital models from 3 dimentional (3D) optical scanner and cone beam computed tomography (CBCT). MATERIALS AND METHODS: We obtained digital models from 11 pairs of stone casts using a 3D optical scanner and a CBCT, and compared the accuracy of the models. RESULTS: The error range of average positive distance was 0.059 - 0.117 mm and negative distance was 0.066 - 0.146 mm. Statistically (P < 0.05), average positive distance was larger than 70 µm and shorter than 100 µm, and that of negative distance was larger than 100 µm and shorter than 120 µm. CONCLUSION: We concluded that the accuracy of digital models generated from CBCT is not appropriate to make final prostheses. However, it may be acceptable for provisional restorations and orthodontic diagnoses with respect to the accuracy of the digitalization.
Cone-Beam Computed Tomography* ; Dental Casting Technique ; Dental Models ; Diagnosis ; Prostheses and Implants ; Radiography, Dental, Digital

OBJECTIVETo investigate the marginal adaptation of crowns fabricated by selective laser melting (SLM) and wax-lost-casting method, so as to provide an experimental basis for clinic.

METHODSCo-Cr alloy full crown were fabricated by SLM and wax-lost-casting for 24 samples in each group. All crowns were cemented with zinc phosphate cement and cut along longitudinal axis by line cutting machine. The gap between crown tissue surface and die was measured by 6-point measuring method with scanning electron microscope (SEM). The marginal adaptation of crowns fabricated by SLM and wax-lost-casting were compared statistically.

RESULTSThe gap between SLM crowns were (36.51 ± 2.94), (49.36 ± 3.31), (56.48 ± 3.35), (42.20 ± 3.60) µm, and wax-lost-casting crowns were (68.86 ± 5.41), (58.86 ± 6.10), (70.62 ± 5.79), (69.90 ± 6.00) µm. There were significant difference between two groups (P < 0.05).

CONCLUSIONSCo-Cr alloy full crown fabricated by wax-lost-casting method and SLM method provide acceptable marginal adaptation in clinic, and the marginal adaptation of SLM is better than that of wax-lost-casting method.

Chromium Alloys ; Computer-Aided Design ; Crowns ; Dental Casting Technique ; Dental Marginal Adaptation ; Dental Prosthesis Design ; Freezing ; Lasers

OBJECTIVETo investigate the surface roughness property of the titanium castings cast in a new investment for titanium casting.

METHODSSix wax patterns (20 mm × 20 mm × 0.5 mm) were invested using two investments: three in a new titanium investment material and three in the control material (Rematitan Plus). Six titanium specimens were obtained by conventional casting. After casting, surface roughness of the specimens were evaluated with a surface profilometer.

RESULTSThe surface roughness of the specimens cast in new titanium investment material was (1.72 ± 0.08) µm, which was much smaller than that from Rematitan Plus [(1.91 ± 0.15) µm, P < 0.05].

CONCLUSIONSThe surfaces of titanium cast using these two investment materials are both smooth enough to fulfill the demand of the titanium precision-casting for prosthodontic clinical use.

Dental Casting Investment ; chemistry ; Dental Casting Technique ; Materials Testing ; Surface Properties ; Titanium ; chemistry

OBJECTIVETo detect cobalt chromium alloy antimicrobial coating silver of the surface structure and the cell toxicity in order to provide a theoretical basis for clinical application.

METHODSPlasma spraying technique was adopted to prepare cobalt chromium alloy antimicrobial coating silver. Scanning electron microscopy, energy dispersive analysis and X-ray diffraction analysis were used to evaluate the surface properties. The methyl thiazolyl tetrazolium and flow cytometry method was adopted to test the L929 cell proliferation and the influence of the cell cycle.

RESULTSThe surface of the coating was uniform and compact, combined perfectly with substrate material. The content of the surface was mainly Ag, Cr and a small amount of Ag(2)O, Cr(2)O(3). After cobalt chromium alloy was cultured in leach liquor for 1, 2 and 3 days, the statistical result showed that there was no significant different between the three groups. The cytotoxic level of negative control group was level 0 at each time point and that of other groups was level 1 at each time point. There was no significant difference between cobalt chromium alloy and cobalt chromium alloy antimicrobial coating silver in cell toxicity (P > 0.05). There was no statistical significance of the influence on cell cycle between cobalt chromium alloy with Ag coating [the G2's rate of cell cycle was (8.23 ± 0.39)%] and cobalt chromium alloy group [the G2's rate of cell cycle was (8.70 ± 0.46)%] (P > 0.05).

CONCLUSIONSThe surface of the coating was stable and there was no significant difference between cobalt chromium alloy widely used in clinic and cobalt chromium alloy with Ag coating of the influence on proliferation of L929 cell and cell cycle, the cell compatibility of cobalt chromium with Ag coating is well.

Animals ; Cell Cycle ; drug effects ; Cell Line ; Cell Proliferation ; drug effects ; Chromium Alloys ; chemistry ; toxicity ; Dental Casting Technique ; Fibroblasts ; cytology ; drug effects ; Mice ; Microscopy, Electron, Scanning ; Silver ; chemistry ; toxicity ; Surface Properties ; X-Ray Diffraction

This paper demonstrates the successful application of a novel approach to the computer aided design (CAD) of removable partial denture (RPD) framework. Firstly, we get the data of the partially edentulous cast, a mandibular Kennedy Class II, through a 3D-optical grating measuring system after corresponding pretreatment. Then, the reverse engineering software and 3D CAD software was used to design basis, big conjunction, clasp, small conjunction of the RPD framework. Finally 3D surface model of the RPD framework was created in preparation for direct manufacture using rapid prototyping (RP) methods and foundry. The result indicated that the RPD framework was fabricated successfully and the resulting frameworks provided a satisfactory fit.
Computer-Aided Design ; Dental Alloys ; Dental Casting Technique ; Dental Prosthesis Design ; methods ; Denture Design ; methods ; Denture, Partial, Removable ; Humans

OBJECTIVETo evaluate the accuracy of 3 impression materials in reproductions of simian dental arches using a 3-dimensional optical digitizer.

METHODSTwo simian dental arches were prepared as the master models. Impressions were made for stone casts using three impression materials, including alginate impression materials, C-silicone materials and Impregum-Penta polyether rubber. Five plaster replication models for each master model, as well as for each impression materials were made. The master models and the casts were digitized using a 3-dimensional optical scanner and digitizer. The images of each plaster cast and its original master model were superimposed to obtain the setting cross-section volume of the dental crown. The ratios of the plaster cast volume change and discrepancy distribution patterns were analyzed.

RESULTSCompared with the volume of the master models, the discrepancies of the plaster casts volume were -5.84%, -3.21%, and -0.63% for alginate impression materials, silicone materials and Impregum-Penta polyether rubber, respectively. The discrepancy between the master models and casts from alginate material was statistically significant (P<0.05), but not for silicone materials or Impregum-Penta polyether rubber. Maximal deviation of image fitting was located in the cervix and the gingival areas.

CONCLUSIONThe volumes of all the plaster casts from the 3 impression material are smaller than that of the master model. Impregum-Penta polyether rubber allows the most precise and silicone material the relatively accurate reproduction of the denture model, while alginate can not. The major error areas are in the dental cervix and gingival region.

Dental Casting Technique ; Dental Impression Materials ; chemistry ; Dental Impression Technique ; Dental Models ; Humans ; Imaging, Three-Dimensional ; methods

OBJECTIVETo study the influence of cervical settling method on marginal accuracy of wax patters.

METHODS24 wax patterns were made on the standard cast specimens and round capsules of which twelve patters were made with the method of cervical settling (experiment group), twelve patters were made with the method of wax dripping (control group). Marginal accuracy of patterns were measured before sublation, sublation half an hour and twenty-four hours.

RESULTSThe results revealed that marginal accuracy had significant difference between the cervical settling methods and wax dripping methods (P < 0.05). There was significant difference between the cervical settling methods measured after half an hour and twenty-four hours (P < 0.01). There was also significant difference between the wax dripping methods measured after half an hour and twenty-four hours (P < 0.01).

CONCLUSIONWax patterns with the method of cervical settling can improve marginal accuracy of patterns. The marginal accuracy of wax patters are influenced by the existing time.

Dental Casting Technique ; Dental Marginal Adaptation