Ligustrum lucidum is a woody perennial plant of genus Ligustrum in family Oleaceae. Its dried fruit has high medicinal value. In this study, the authors evaluated the variability and species identification efficiency of three specific DAN barcodes(rbcL-accD, ycf1a, ycf1b) and four general DAN barcodes(matK, rbcL, trnH-psbA, ITS2) for a rapid and accurate molecular identification of Ligustrum species. The results revealed that matK, rbcL, trnH-psbA, ITS2 and ycf1a were inefficient for identifying the Ligustrum species, and a large number of insertions and deletions were observed in rbcL-accD sequence, which was thus unsuitable for development as specific barcode. The ycf1b-2 barcode had DNA barcoding gap and high success rate of PCR amplification and DNA sequencing, which was the most suitable DNA barcode for L. lucidum identification and achieved an accurate result. In addition, to optimize the DNA extraction experiment, the authors extracted and analyzed the DNA of the exocarp, mesocarp, endocarp and seed of L. lucidum fruit. It was found that seed was the most effective part for DNA extraction, where DNAs of high concentration and quality were obtained, meeting the needs of species identification. In this study, the experimental method for DNA extraction of L. lucidum was optimized, and the seed was determined as the optimal part for DNA extraction and ycf1b-2 was the specific DNA barcode for L. lucidum identification. This study laid a foundation for the market regulation of L. lucidum.
Ligustrum/genetics* ; Seeds ; Fruit ; Polymerase Chain Reaction ; Research Design

ObjectiveTo establish a polymerase chain reaction（PCR） method to accurately discriminate the crude materials of Murrayae Folium et Cacumen， Murraya exotica and M. paniculata. MethodBased on the difference in chloroplast genome sequences of M. exotica and M. paniculata， species-specific identification primers P03 and P04 of M. exotica and M. paniculata were designed according to single nucleotide polymorphism （SNP） on the chloroplast genome. A multiplex allele-specific PCR identification method was established for the identification of M. exotica and M. paniculata following the optimization of annealing temperature， number of cycles， and primer concentration ratio. The established PCR method for identification was explored and verified in terms of tolerance and feasibility by investigating the type of Taq polymerases and PCR system model. ResultIn this multiplex allele-specific PCR identification method， about 330 and 230 bp of specific fragments were amplified from DNA templates of M. exotica and M. paniculata， respectively， under the following conditions：cycle number of 31， annealing temperature of 60 ℃， and primer concentration ratio of P03 and P04 of 1∶2. Consistent results were obtained for samples from different sources. ConclusionThe multiplex allele-specific PCR identification method established in this study can accurately identify the origin of Murrayae Folium et Cacumen， which can be used for the simultaneous identification of M. exotica and M. paniculata by the length of fragments in a single identification assay.

ObjectiveTo establish a specific polymerase chain reaction （PCR） method for the identification of Artemisia absinthium to allow accurate and convenient identification of A. absinthium and its related species. MethodThe chloroplast genome sequences of A. absinthium and its related species were searched from Chloroplast Genome Information Resource （CGIR）， and the specific single nucleotide polymorphism （SNP） sites of A. absinthium were screened out. A pair of specific identification primers （zykh1-F and zykh1-R） of A. absinthium was designed. The original plant samples of A. absinthium and its related species were collected. The specific PCR method was established and optimized， and the tolerance and feasibility of this method were investigated and verified. The method was used to identify A. absinthium samples purchased from Xinjiang medicinal materials market. ResultA 210 bp bright band was obtained from A. absinthium after PCR amplification and gel electrophoresis under the following conditions： specific primers zykh1-F and zykh1-R， annealing temperature of 54 ℃， and the number of cycles of 33. No such band was observed from its relative species， such as A. argyi， A. annua， A. leucophylla， and A. lavandulaefolia. ConclusionThe specific PCR identification method of established in this study can accurately identify A. absinthium and its common related species with high specificity. The method can save time and cost and allows a convenient and fast species identification for the introduction and utilization of A. absinthium resources.

ObjectiveUncommon medicinal herbs are valuable medicinal resources， but their identification is a difficult problem in Chinese medicine due to their particularity and complexity. It is， therefore， urgent to establish a method for the identification of uncommon medicinal herbs. In this study， DNA signature sequence （DSS） tags were used to establish a specific polymerase chain reaction （PCR） identification method for Hibisci Cortex， the origin plant of Hibisci Cortex， and its adulterants. MethodThe candidate DSS tags were obtained from the chloroplast genome sequence analysis， and the DSS tags were verified by DNA sequencing. The specific identification primers for H. syriacus were designed based on the obtained reliable DSS tags. The PCR reaction conditions were optimized， and the tolerance and feasibility were investigated. ResultA DSS tag for identification of H. syriacus was obtained from the comparison of sequencing results of the amplified products with DSS， which revealed the distinguishing characteristics of Hibisci Cortex and its adulterants. A pair of specific primers for H. syriacus was designed according to the DSS tag. After PCR amplification and gel electrophoresis with the primers， a single bright band of about 270 bp was observed from H. syriacus， which did not appear in the four adulterants. ConclusionA DSS tag obtained in this study can be used to identify H. syriacus. The specific primers designed based on this DSS tag can accurately and simply identify the original plant of Hibisci Cortex and its adulterants， which provides a new method and idea for the molecular identification of genuine and counterfeit products of Hibisci Cortex.

Based on the investigation of wild medicinal plant resources in Dexing city, Jiangxi province, and the collected plant specimens, which were identified by taxonomy, two new record species of geographical distribution were found, which are Meehania zheminensis A. Takano, Pan Li & G.-H. Xia and Corydalis huangshanensis L.Q.Huang & H.S.Peng. The voucher specimens are kept in Dexing museum of traditional Chinese medicine. In this paper, the new distribution species were reported, which provides valuable information for further enriching and supplementing the species diversity of medicinal plant resources in Jiangxi province.
China ; Corydalis ; Humans ; Lamiaceae ; Medicine, Chinese Traditional ; Museums ; Plants, Medicinal

Nitrogen fertilizer has been the long-lasting crucial component in cultivation of Chinese materia medica(CMM) and crops for its profound effects on enhancing the productivity. In consideration of its role in better production, intensive and excessive application of N fertilizer is often found in CMM cultivation. Therefore, firstly, this review summarized various concentrations of N application with regards to different CMM and districts from the literatures published in the last two decades. The recommended concentration of nitrogen application of forty seven CMM species were covered in this review. We found that the optimum rates of nitrogen fertili-zer for different medicinal plants species were varied in the range between 0-1 035.55 kg·hm~(-2). Most of the optimum rates of nitrogen fertilizer for CMM in published researches fell between 100-199 kg·hm~(-2). The optimum rate of nitrogen fertilizer is not only related to amount of nitrogen required for different medicinal plants but also to soil fertilities of different fields. In addition, we outlined the diffe-rent effects of proper and excessive nitrogen deposition on yield of CMM. Proper nitrogen deposition benefits the yield of CMM, howe-ver, excessive nitrogen use accounts for a decrease in CMM yield. We elucidated that nutritional content, water use efficiencies, and photosynthesis capacity were major influencing factors. Researches showed that proper nitrogen fertilizer could promote the water use efficiencies of plants and boost photosynthesis. Consequently, the yield of CMM can be enhanced after nitrogen deposition. However, negative effects of nitrogen fertilizer were also found on plant including producing toxic substances to the soil and causing severe pest damages. Lastly we analyzed the impact of N fertilizer application on secondary metabolites which accounts for a large part of active pharmaceutical ingredients of CMM. It usually caused an increase in nitrogen-containing secondary metabolites content and a decrease in non-nitrogen-containing secondary metabolites content respectively. The potential underlying mechanisms are the different synthetic pathways of these metabolites and the plant nutritional status. Synthesis of non-nitrogen-containing secondary metabolites like phenols can be inhibited after nitrogen application because of the competition of the same precursor substances between metabolites synthesis and plant growth. To sum up, impacts and mechanisms of nitrogen fertilizer on yield and quality enhancement of CMM were discussed in this review. Negative effects of excessive nitrogen application on CMM should be paid special attention in CMM cultivation and prescription fertilization based on the field soil quality is strongly recommended. Overall, this review aims to provides insights on improving the proper application of N fertilizer in the cultivation of CMM.
Agriculture ; China ; Fertilizers ; Materia Medica ; Nitrogen/analysis* ; Soil

Nitrogen is one of the most frequently used fertilizers in growth of Chinese medicinal plants(CMP). As in many other ecosystems, CMP ecosystem is also composed of plant-herbivore-natural enemy(tritrophic) interactions. Nitrogen fertilizer influences the growth and reproduction of CMP, and it is also able to heavily shape the ecosystem functions of CMP ecosystem through bottom-up forces. Understanding the specific effects of nitrogen fertilizer towards each trophic level will be beneficial to improve the resistance of CMP to herbivore and enhance the control efficiency of nature enemies to herbivore, and eventually, maximize the yield and quality of CMP. Most papers published on nitrogen use in plants focused mainly on the impact of nitrogen fertilization on CMP yield and quality. Influences of nitrogen application on CMP ecosystem get little attention at present. Therefore, this review summed up the potential effects of nitrogen fertilization on CMP ecosystem from perspectives of soil and tritrophic interactions. First of all, nitrogen fertilizer might decrease soil microbial biomass and altered the community structures of soil bacteria, fungi and protozoa. Negative effects of nitrogen fertilizer were found on biodiversity of soil bacteria and protozoa. Different fungi species respond differently to nitrogen fertili-zers. Nitrogen deposition can also decrease the soil pH. Decreases in soil microbial diversity and soil acidification can cause negative effects on CMP growth. In addition, nitrogen fertilizer could regulate the pest resistance of CMP including constitutive and inducible resistance. Both positive and negative effects of nitrogen application were found on pest resistance of CMP. Moreover, the development and predation of natural enemies were influenced by nitrogen deposition. Nitrogen influences natural enemies in many ways including plant volatiles, plant nutrient and structure and the supplementary food quality. Nectar and honeydew of plants and preys serve as important food source for natural enemies especially in early season when preys are still not available. Finally, the interactions between herbivores and their natural enemies were also shaped by nitrogen fertilizer in many aspects like increasing the nutritional content of prey and changing control efficiency of natural enemies. Some herbivores have evolved a strategy to sequester secondary metabolites which they absorbed from plant during their feeding. Studies showed that sequestration efficiency of secondary metabolites in prey could also be regulated by nitrogen. Parasitic, emergence, reproduction rate and longevity of parasites were found positively correlated with nitrogen deposition. Hopefully this study will shed light on practicable and economical application of nitrogen in cultivation of CMP.
China ; Ecosystem ; Fertilizers ; Nitrogen ; Plants, Medicinal ; Soil

Nitrogen fertilizers play an important role in the regulation of plant stress resistance. Impacts of nitrogen fertilizers on abiotic stress resistance and biotic stress resistance of Chinese materia medica(CMM) were summarized in this study. Adequate nitrogen application improves the abiotic stress resistance and weed resistance of CMM, however adverse effect appears when excess nitrogen is used. Generally, pest resistance decreases along with nitrogen deposition, while effects of nitrogen application on disease resistance vary with different diseases. Mechanisms underlying the impact of nitrogen fertilizers on plant stress resistance were also elucidated in this study from three aspects including physical defense mechanisms, biochemistry mechanisms and molecular defense mechanisms. Nitrogen availability modulates physical barrier of CMM like plant growth, formation of lignin and wax cuticle, and density of stomata. Growth of CMM promoted by nitrogen fertilizer may cause some decrease in pest resistance of CMM due to an increase in hiding places for pest along with plant growth. High ambient humidity caused by excessive plant growth facilitates the growth and development of CMM pathogen. Nitrogen application can also interfere with the accumulation of lignin in CMM which makes CMM more vulnerable to pest and pathogen attack. Stomatal closing delays due to nitrogen application is also a causal factor of increasing pathogen infection after nitrogen deposition. Biochemical defenses of plants are mainly achieved through nutrient elements, secondary metabolites, defense-related enzymes and proteins. Nutritional level of CMM and various antioxidant enzymes and resistance-related protein activities are elevated along with nitrogen deposition. These antioxidant enzymes can reduce the damage of reactive oxygen species content produced by plant in response to adversity and therefore enhance stress resistance of CMM. Researches showed that nitrogen application could also cause an increase in nitrogen-containing secondary metabolites content and a decrease in non-nitrogen-containing secondary metabolites content respectively. Nitrogen-mediated molecular defense mechanisms includes multiple plant hormones and nitric oxide signals. Plant hormones related to plant defense like salicylic acid, jasmonic acid and abscisic acid can be modulated by nitrogen application. Negative effect of nitrogen deposition was found on salicylic acid accumulation and the expression of related plant disease resistance genes. However, jasmonic acid level can be elevated by nitrogen. Nitric oxide signals constitute an important part of nitrogen mediated defense mechanisms. Nitric oxide signaling is related to many aspects of plant immunity. The roles of nitrogen fertilizers in CMM stress resistance are complex and may vary with different CMM varieties and environments. Further studies are urgently needed to provide a comprehensive understanding of how to improve stress resistance of CMM by using fertilizers.
Abscisic Acid ; China ; Materia Medica ; Nitrogen ; Plant Growth Regulators

With the rapid development of comprehensive health industry, the demand for Chinese medicinal materials is increasing. There is also a growing demand for land for the cultivation of Chinese medicinal materials.Based on the analysis of the demand characteristics of planting habitats for Chinese medicinal herbs, this paper finds that compared with the cultivated environment, the wild environment is more conducive to the improvement of the quality and stress resistance of medicinal plants. The eco-planting for Chinese medicinal materials is the only way to achieve high quality, efficient and sustainable production of traditional Chinese medicine. Therefore, according to the habitat distribution characteristics of wild medicinal plants, combined with the current situation of land resource utilization in China and the increasing demand for land for Chinese herbal medicine cultivation, the land use strategy of Chinese herbal medicine ecological agriculture was proposed. ① To vigorously develop underwood planting and change the existing field cultivation mode. ② To make full use of mountainous areas and barren slopes to carry out wild planta tending or planting imitates wild condition. ③ According to the development law and biological characteristics of medicinal plants, the land resources should be developed and used rationally according to local conditions.This can not only meet the requirements of the specific growth environment of Chinese medicinal materials, realize the sustainable development of the Chinese medicinal materials industry, but also increase the economic income of people in mountainous areas, provide scientific and effective solutions for the land use of Chinese medicinal materials, and also have important significance for the protection of wild Chinese medicinal materials.
Agriculture ; China ; Drugs, Chinese Herbal ; Materia Medica ; Medicine, Chinese Traditional ; Plants, Medicinal