OBJECTIVE: To analyze the cement flow in the abutment margin-crown platform switching structure by using the three-dimensional finite element analysis, in order to prove that whether the abutment margin-crown platform switching structure can reduce the inflow depth of cement in the implantation adhesive retention. METHODS: By using ANSYS 19.0 software, two models were created, including the one with regular margin and crown (Model one, the traditional group), and the other one with abutment margin-crown platform switching structure (Model two, the platform switching group). Both abutments of the two models were wrapped by gingiva, and the depth of the abutment margins was 1.5 mm submucosal. Two-way fluid structure coupling calculations were produced in two models by using ANSYS 19.0 software. In the two models, the same amount of cement were put between the inner side of the crowns and the abutments. The process of cementing the crown to the abutment was simulated when the crown was 0.6 mm above the abutment. The crown was falling at a constant speed in the whole process spending 0.1 s. Then we observed the cement flow outside the crowns at the time of 0.025 s, 0.05 s, 0.075 s, 0.1 s, and measured the depth of cement over the margins at the time of 0.1 s. RESULTS: At the time of 0 s, 0.025 s, 0.05 s, the cements in the two models were all above the abutment margins. At the time of 0.075 s, in Model one, the gingiva was squeezed by the cement and became deformed, and then a gap was formed between the gingiva and the abutment into which the cement started to flow. In Model two, because of the narrow neck of the crown, the cement flowed out from the gingival as it was pressed by the upward counterforce from the gingival and the abutment margin. At the time of 0.1 s, in Model one, the cement continued to flow deep inside with the gravity force and pressure, and the depth of the cement over the margin was 1 mm. In Model two, the cement continued to flow out from the gingival at the time of 0.075 s, and the depth of the cement over the margin was 0 mm. CONCLUSION When the abutment was wrapped by the gingiva, the inflow depth of cement in the implantation adhesive retention can be reduced in the abutment margin-crown platform switching structure.
Finite Element Analysis ; Cementation/methods* ; Gingiva ; Crowns ; Dental Abutments ; Dental Cements ; Dental Stress Analysis

Post-and-core crown is one of the most common forms of restoration of tooth after root canal therapy (RCT). Infection control is the core objective of RCT, which is usually well realized by endodontists. However, many prosthodontists often neglect the infection control of the tooth and the maintenance of the curative effect of RCT during the process of post-and-core crown, which may lead to the failure of the final restoration. The concept of integrated crown-root treatment advocated recently requires clinicians to consider the RCT and final restoration as a whole, rather than simply divided into two parts-endodontic treatment and restorative treatment. As the core content of integrated crown-root treatment, infection control should be taken seriously by clinicians and implemented throughout the whole treatment process, especially in the restorative treatment that is easily overlooked after RCT. Therefore, this article describes the infection control of post-and-core crown restoration, classifies the tooth requiring post-and-core crown restoration, and puts forward the measures of infection control before and during post-and-core crown restoration, in order to provide reference and guidance for clinical practice.
Humans ; Crowns ; Tooth Crown ; Post and Core Technique ; Root Canal Therapy ; Infection Control ; Tooth Fractures

Objective: To explore the effect of scanning methods on finish line trueness of the full crown preparation. Methods: The standard full crown preparation model of the right maxillary first molars was prepared by using the maxillary standard resin dentition model. The standard preparation was scanned by imetric scanner and data were used as the true value. CEREC Omnicam and 3Shape TRIOS were used to scan the standard preparation. According to the scanning methods, they were divided into parallel scanning group, occlusal wave scanning group and buccolingual wave scanning group. Each group was scanned repeatedly 6 times. The data were imported into Geomagic Studio 2013 software, and the local finish line image data of the mesial, distal, buccal and lingual regions of the full crown preparation were extracted respectively. Three-dimensional deviation analysis was performed with the reference true value, and the root- mean-square error (RMSE) was the evaluation index of scanning trueness. The statistical method was one-way ANOVA. Results: Parallel scanning group: in general, the RMSE value of complete finish lines of scanner B [(35±6) μm] was significantly lower than that of scanner A [(44±7) μm](P<0.05). After scanner A occlusal wave scanning, the RMSE values of the mesial and distal finish lines [(33±5) and (50±12) μm] were significantly lower than those of parallel scanning group (P<0.05). After buccal and lingual wave scanning, the RMSE values of local finish lines in the mesial, distal, buccal and lingual regions [(37±3), (50±6), (28±6) and (29±8) μm] were significantly lower than those in parallel scanning group [(45±9), (63±7), (38±3) and (40±3) μm] (P<0.05). No significant difference was found in the RMSE values of the mesial, distal, buccal and lingual regions of scanner B between parallel scanning group, occlusal wave scanning group and buccolingual scanning group (P>0.05). Conclusions: The scanning trueness of the full crown preparation finish line obtained by the active triangulation scanning equipment can be improved by changing the scanning method to wave scanning.
Humans ; Imaging, Three-Dimensional ; Dental Impression Technique ; Computer-Aided Design ; Dental Care ; Crowns

OBJECTIVE: To predict the learning curve of tooth preparation for all ceramic crowns of maxillary central incisors on phantom head simulators for graduate students participating in standardized dental resident training based on the modified Wright learning curve model, then to analyze and applicate the learning curve. METHODS: Twelve graduate students participating in standardized dental resident training were selected to prepare the resin maxillary central incisors on phantom head simulators for all ceramic crowns 4 times. The results of preparation were evaluated by 3 prosthetic experts with at least 10 years' experience focusing on the reduction, contour, taper, shoulder, finish line, margin placement, adjacent tooth injury, and preparation time for tooth preparation. The learning rate of tooth preparation was calculated by scores of tooth preparation of 4 times. The learning curve of tooth preparation was predicted based on the modified Wright learning curve model. According to the criteria of standardized training skill examinations for dental residents in Beijing, 80 was taken as the qualified standard score. The minimum training times for tooth preparation to satisfy the qualified standard score (80) was calculated, to analyze the characteristics of learning curve and evaluate the effectiveness of tooth preparation. RESULTS: The scores of 4 tooth preparation were 64.03±7.80, 71.40±6.13, 74.33±5.96, and 75.98±4.52, respectively. The learning rate was (106±4)%, which showed the learning curve an upward trend. There were no significant differences between the qualified standard score and the predicted scores of tooth preparation from the 5^th preparation to the 13^th preparation (P > 0.05). The predicted score of the 14^th preparation was higher than the qualified standard score (P < 0.05). CONCLUSION The trend of the learning curve of tooth preparation for all ceramic crowns of maxillary central incisors on phantom head simulators for graduate students participating in standardized dental resident training is upward, which predicts the minimum training times higher than the qualified standard score is 14 times.
Humans ; Tooth Preparation, Prosthodontic/methods* ; Incisor ; Learning Curve ; Crowns ; Tooth Preparation ; Ceramics ; Dental Porcelain ; Dental Prosthesis Design

The minimally invasive fixed occlusal reconstruction of dentition defect is a sequential reconstruction process involving the minimally invasive restoration of the remaining natural teeth, the implant restoration of edentulous areas and the occlusal change from reversible to non-reversible. The simultaneous completion of minimally invasive natural teeth restorations and implant-supported crowns or bridges in an ideal occlusal design shows the obvious advantages of digital integration. The use of digital technologies such as intraoral scanning, kinematic face bow, virtual articulator and computer aided design and computer aided manufacturing (CAD/CAM), could be integrated in each stage of occlusal reconstruction, including the overall documentations and assessments before the restoration, the determination of the functional restoration space, the precise design and fabrication of the provisional and final restorations taking into account both esthetics and function and the preservation of the follow-up documentations and assessments after the restoration. The integration process can optimize clinical process and improve restoration accuracy. This article briefly describes the concept of minimally invasive occlusal reconstruction of dentition defects and the integration strategy of digital sequential restoration.
Humans ; Dentition ; Dental Implants ; Esthetics, Dental ; Mouth, Edentulous ; Computer-Aided Design ; Crowns ; Dental Prosthesis Design

Objective: To evaluate the clinical outcomes of computer aided design and computer aided manufacturing (CAD/CAM) ceramic endocrowns in endodontically treated posterior teeth after five years by a retrospective study. Methods: Patients who received CAD/CAM ceramic endocrowns after endodontically treatment in Department of Endodontics, School of Stomatology, The Fourth Military Medical University between January 2016 and June 2017 were invited for this clinical study. Clinical performance was evaluated in the aspect of color match, anatomic form,marginal adaptation, restoration integrity and secondary caries. Survival rate of the restorations was calculated by the use of Kaplan-Meier method. Log-rank test was applied as well for the sake of analyzing the effect of tooth position, sex and materials to the survival rate of the restorations. Results: Seventy-four patients, 25 men and 49 women with age of (38.8±10.2) years, participated in this study for a total of 101 CAD/CAM ceramic endocrowns after observation period of (62.8±12.0) months. There were 8 failed cases among 101 restorations, 5 were loss of retention, 2 were ceramic fracture and 1 was secondary caries respectively. In particular, 93% (89/96) restorations got score A on anatomic form and 95% (91/96) restorations got score A on marginal adaptation, while 38% (36/96) restorations showed the good color match compared with the abutment teeth. The estimated cumulative survival rate of CAD/CAM ceramic endocrowns in endodontically treated posterior teeth after 5 years was 93.0% (95%CI: 87.9%-98.1%). The single-factor Log-rank analysis demonstrated that there was no statistically significant difference in the survival rate of CAD/CAM ceramic endocrowns among men and women, premolars and molars, position in the dental arch, or different materials (χ²<0.01, P=0.957; χ²=0.64, P=0.422; χ²=0.69, P=0.407; χ²=0.88, P=0.349). Conclusions: Based on this clinical study, the clinical performance of CAD/CAM ceramic endocrowns in endodontically treated posterior teeth after five years is reliable, which could be a general option to restore nonvital teeth.
Humans ; Male ; Female ; Adult ; Middle Aged ; Crowns ; Dental Porcelain/therapeutic use* ; Retrospective Studies ; Dental Prosthesis Design ; Dental Stress Analysis ; Materials Testing ; Computer-Aided Design ; Ceramics

Objectives: To study the design of nonmetallic crowns for deciduous molars by means of computer aided design and to analyze the key parameters of the nonmetallic crowns of deciduous molars using finite element method. Methods: The three-dimensional model of a mandibular second primary molar was constructed by using a micro-CT system. The thickness of the crown was limited to 0.5 mm and four different crown shapes (chamfer+anatomic, chamfer+non-anatomic, knife edge+anatomic and knife edge+non-anatomic) were designed. Then, the crown shape was limited as chamfer+non-anatomic and five different thicknesses of the crown (0.50, 0.75, 1.00, 1.25, 1.50 mm) were designed, and three different materials, including polyetherketoneketone (PEKK), polymethylmethacrylate (PMMA) resin and resin-infiltrated ceramic, were applied to make the crown. Stress distribution and fatigue of each component of the model under vertical and oblique loadings were analyzed by using finite element method. Non-axial retention analysis was performed on chamfer+non-anatomic crowns, made of PMMA resin, with thicknesses of 0.50, 0.75, 1.00, 1.25 and 1.50 mm. Results: Among the four crown shape designs, the chamfer+non-anatomic type crown showed the lowest von Mises stress and the highest safety factor. By comparing three different materials, the resin-infiltrated ceramic group showed obvious stress concentration on the buccal edge of the crown and the PEKK group showed stress concentration in the adhesive layer. Results of non-axial retention analysis showed that the torques required by the crowns with five thicknesses at the same rotation angle were as follows: 4 856.1, 4 038.1, 3 497.3, 3 256.3 and 3 074.3 N⋅m, respectively. The comparison of areas of the adhesives fracture among groups were as follows: 0.5 mm group < 0.75 mm group < 1.00 mm group < 1.25 mm group < 1.50 mm group. Conclusions: In the design of nonmetallic crowns for primary molars, the edge of the crown should be designed as chamfer, the shape of the inner crown should be non-anatomical and the minimum preparation amount of the occlusal surface should be 1.00 mm. Among the three materials, PMMA resin, of which elastic modulus is similar to the dentin and the dental adhesive, might be the most suitable material for the crowns of primary molars.
Ceramics ; Crowns ; Dental Stress Analysis/methods* ; Finite Element Analysis ; Molar

Objective: To compare the clinical performance of posterior single implant-supported monolithic zirconia crowns fabricated by full digital workflow and that of those fabricated by conventional workflow. Methods: This is prospective clinical research. Thirty-five patients who participated in a previous study during August 2017 to October 2018 at Department of Prosthodontics, Peking University School and Hospital of Stomatology were included in this 3-year follow-up study. The 35 patients, 17 females and 18 males, aged (49.0±15.4) years (24-86 years old), was allocated into two groups. In the full digital workflow group, intraoral scanning was taken immediately after implant placement, and a full zirconia implant crown was fabricated using model-free computer aided design/computer aided manufacturing (CAD/CAM) procedure (n=14). In the conventional group, a conventional impression was taken 3 months after implant placement and the stone model was produced. A full zirconia implant crown was fabricated using conventional model-based procedure (n=21). Three years following crown delivery, all the prostheses were evaluated in the aspect of color, surface roughness, contour and marginal integrity using modified US Public Health Service criteria (MUSPHS criteria). The soft and hard tissue around implant was evaluated using modified plaque index, probing depth (PD), number of implants with bleeding on probing, marginal bone loss (MBL). The biological and mechanical complication were also recorded. Statistical analysis was performed using independent samples t test, Mann-Whitney U test and Fisher's exact test. Results: The total survival rate of prosthesis and implant was 100% (35/35). No significant difference in MUSPHS criteria ratings on color, surface roughness, contour and marginal integrity of these crowns were found between the full digital workflow group and the conventional group (P>0.05). Sixteen out of the 35 crowns had a contour score of B due to loss of interproximal contact. Ten out of the 35 crowns had the screw hole sealing resin sinking or falling off, four in the full digital workflow group and six in the conventional group. There was no significant difference in the rate of prostheses mechanical complications between the two groups (P=1.000). For all the implants, there was no significant difference in MBL, PD, the modified plaque index, and number of implants with bleeding on probing between the two groups (U=119.50,133.00,142.50, t=-0.53, P>0.05). Conclusions: The clinical performance of implant-supported posterior single monolithic zirconia crowns fabricated by full digital workflow was stable. There was no significant difference in the clinical performance of the single implant crowns between the full digital workflow group and the conventional group.
Adult ; Aged ; Aged, 80 and over ; Crowns ; Female ; Follow-Up Studies ; Humans ; Male ; Middle Aged ; Prospective Studies ; United States ; Workflow ; Young Adult ; Zirconium

Objective: To evaluate the pink and white esthetics of conventional and socket shield technique (SST) immediate implant restoration. Methods: Thirty volunteers were recruited according to preset criteria, and were assigned to 3 groups. Natural teeth group (ten undergraduates or postgraduates from Peking University School and Hospital of Stomatology in January 2020, n=10): all volunteers' maxillary anterior teeth were natural teeth with healthy gingiva, and none of the teeth were restored by crowns or composite. Conventional group and SST group (patients had a maxillary central incisor immediate implant placed in Department of Prosthodontics, Peking University School and Hospital of Stomatology during October 2016 to January 2021, n=10 for each group): the volunteer had an unrestored natural maxillary central incisor, and the contralateral maxillary central incisor was restored by conventional or SST immediate implant placement, temporization and all ceramic final restoration, photos were taken 12 months post-surgery. Three groups of evaluators namely layperson (staff from Second Clinical Division of Peking University School and Hospital of Stomatology and 2 family members, n=10), dental students (class 2015 undergraduates from Peking University School and Hospital of Stomatology, n=10) and prosthodontists (from Department of Prosthodontics, Peking University School and Hospital of Stomatology, n=10) were invited to assess the esthetics using pink esthetic score (PES) and white esthetic score (WES). The results were statistically analyzed. Results: PES and WES of natural teeth group [9(8, 10) and 8(7, 10)] were significantly higher than conventional group [7(6,8) and 7(6,9)] (H=287.08, 132.79,P<0.01) and SST group [7(6, 9) and 8(7, 9)] (H=216.01, 101.21, P<0.01). SST group yielded higher PES than the conventional group (H=-71.06, P<0.01), yet had similar WES (H=-31.57, P>0.05). Dental students had significant lower PES and WES than prosthodontists (H=-120.90, -218.86, P<0.01) and layperson (H=-109.55, 134.97, P<0.01). Prosthodontists and layperson got similar PES (H=-11.36, P>0.05), however yielded different WES (H=-83.89, P<0.01). Conclusions: SST immediate implant placement obtained better pink esthetics than conventional protocol 12-month after implant surgery, profession may have significant impact on evaluators during pink and white esthetic evaluation.
Crowns ; Dental Implants ; Dental Implants, Single-Tooth ; Esthetics, Dental ; Humans ; Immediate Dental Implant Loading ; Maxilla/surgery* ; Treatment Outcome

OBJECTIVE: To explore the construction process of the digital reference crown models, and to initially establish the digital reference crown models of the primary teeth to lay the foundation for the establishment of the standardized crown models and the future related applications of computer-aided design/computer-aided manufacture (CAD/CAM) technology to pediatric dentistry. METHODS: This study randomly selected children who were caries free, aged from 4 to 5 years in several kindergartens of Haidian District of Beijing.Plaster dental models were made for the children after taking complete impressions.The digital dental models were reconstructed by using the three-dimensional (3D) dental model scanner.And then, Geomagic Studio, a 3D reverse engineering software, was employed to extract the single dental crown data, the mesiodistal and buccolingual diameters and the height of the crowns were measured.The object was reduced or enlarged by a numerical factor, and then the size of each dental crown was standardized.A total of 3-5 points features on the crown were created, and all the objects were aligned through the functions of feature-based alignment.Finally, through average-based object creation and smoothing, the digital models of reference crowns of the primary teeth were established. RESULTS: A total of 40 plaster dental models from 16 boys and 26 girls were selected out for our further study.The digital dental models were reconstructed, and the mesiodistal and buccolingual diameters and the height of the crowns were measured by using reverse engineering technology.Comparing the results of using mesiodistal diameter, buccolingual diameter and height as the standards, we chose the mesiodistal diameters of crowns to do the standardization, and successfully established the digital reference models of 20 primary teeth crowns with detailed surface characteristics. CONCLUSION In this study, the digital reference crown models of the primary teeth were established by reverse engineering technology, providing reference value for the standardized crown models and application for clinical practice, scientific research and teaching.Furthermore, this study also contributes to the extensive application of CAD/CAM technology in pediatric dentistry and the development of CAD/CAM dental systems with independent intellectual property rights.
Child ; Computer-Aided Design ; Crowns ; Dental Prosthesis Design ; Female ; Humans ; Male ; Software ; Tooth Crown ; Tooth, Deciduous