Occupational disease hazards in plywood manufacturing mainly include wood dust, formaldehyde, phenol, ammonia, noise, terpene, microorganisms, etc. The exposure is complex with multiple factors accompanied or coexisted. In the production process, these factors are exceeded, and mass occupational disease hazard events occurred among workers. Exposure to wood dust, formaldehyde, terpene, etc., put workers at increased risk of cancer. This article provides a review of this issue in order to provide a scientific basis for the prevention and control of occupational disease hazards in plywood manufacturing.
Humans ; Wood/chemistry* ; Occupational Diseases/chemically induced* ; Formaldehyde/adverse effects* ; Terpenes ; Dust ; Occupational Exposure/adverse effects*

Objective: In order to understand the dust concentration in the workplace of dust exposure enterprises in Shenxian. To evaluate the degree of occupational hazard factors of dust exposure enterprises. And provide basis for the formulation of occupational protection standards and management system of dust exposure enterprises. Methods: In February 2022, the dust concentration monitoring data of 89 dust exposure enterprises from 2017 to 2020 by the Shenxian Center for Disease Control and Prevention were collected, and the qualified rates of dust concentration detection of dust exposure enterprises in different years, dust types and enterprise sizes were analyzed. Results: A total of 89 dust enterprises were monitored from 2017 to 2020, 2132 dust samples were collected, and 1818 qualified samples were taken, with a total qualified rate of 85.3%. From 2017 to 2020, the dust detection qualified rates showed a year-by-year increase trend, 78.7% (447/568), 84.1% (471/560), 88.6% (418/472) and 90.6% (482/532), respectively, with statistically significant differences (χ(2)=36.27, P=0.003). The differences in the qualified rates of dust detection samples of silicon dust (66.1%, 41/62), grain dust (86.7%, 1549/1786), cotton dust (84.1%, 106/126) and wood dust (77.2%, 122/158) were statistically significant (χ(2)=29.66, P=0.002). The qualified rate of dust samples in large and medium-sized enterprises (95.1%, 1194/1256) was higher than that of small-sized enterprises (71.2%, 624/876), and the difference was statistically significant (χ(2)=1584.40, P=0.001) . Conclusion: The qualified rate of dust concentration monitoring results of dust exposure enterprises in Shenxian showed an increase trend year by year, while the pualified rate of dust concentration monitoring in small-sized enterprises was low, and the occupational hazard of silica dust was still severe.
Dust ; Silicon ; Wood ; Workplace

Concrete is the most widely used modern building material. It is easy to crack under the action of stress, which makes the concrete structure permeable, affecting the durability and integrity of the structure, and thus shortening its service life. Microbial in-situ remediation technology is a low cost, effective and green way for concrete crack repairing. Due to its excellent biocompatibility, service life elongation, economic losses and environmental pollution reduction, microbial in-situ remediation technology has been intensively investigated. Bacillus has attracted much attention because of its excellent biomineralization ability, extremely strong environmental tolerance and long-term survival ability of its spores. In order to promote the research, development and large-scale application of microbial in-situ healing of concrete, the paper reviews the mechanism of spore-based in-situ healing of concrete, the survival of spores exposed in concrete, the influence of spores and external additives on the mechanical properties of concrete, progress in research and development of healing agent as well as healing effects. Moreover, future research focuses such as improving the survival ability of spores in the harsh environment of concrete, reducing the influence of external additives on the mechanical properties of concrete, and strengthening the healing effect of actual field applications are also summarized.
Bacillus ; Calcium Carbonate ; Construction Materials ; Spores, Bacterial ; Technology

Dermoscopy ; Diagnosis, Differential ; Face ; Humans ; Nevus, Pigmented ; Skin Neoplasms/diagnostic imaging* ; Wood

Dissolving pulp consists of high purity cellulose and is widely used to as raw materials for the production of regenerated cellulose fiber, cellulose ester and cellulose ether. The characteristic of dissolving pulp affects greatly the production and processing performance of subsequent products. The α-cellulose content, hemicellulose content, pulp viscosity, ash, transition metal ion content, fiber morphology, molecular weight distribution of cellulose and the reactivity are the important properties. Because of its green, mild and high efficiency, the application of enzymes in improving the properties of dissolving pulp has a promising application prospect and has been researched significantly. In this review, the main properties of dissolving pulp are presented first, followed by a recommendation of the enzymes to improve these properties. The application and current research of cellulase and xylanase in improving the properties of dissolving pulp are emphasized. The main problems and the future research areas in improving the properties of dissolving pulp by enzymes are revealed. Finally, the technology prospects in this field are proposed.
Cellulase ; Molecular Weight ; Viscosity ; Wood

Two sesquiterpenes were isolated from the agarwood originating from Gyrinops salicifolia with various chromatographic techniques, and their structures were determined as 12-hydroxy-dihydrocyperolone(1) and(rel)-4β,5β,7β-eremophil-9-en-12,8α-olide(2), through a combined analysis of physicochemical properties and spectroscopic evidence. Compound 1 was a new compound. Compound 2 showed cytotoxicities against K562 and BEL-7401 cell lines, with IC_(50) values of(17.85±0.04) and(21.82±0.07) mg·L~(-1), respectively [taxol as positive control, with IC_(50) values of(1.97±0.11) and(6.31±0.08) mg·L~(-1)].
Antineoplastic Agents, Phytogenic ; isolation & purification ; pharmacology ; Cell Line, Tumor ; Humans ; Molecular Structure ; Phytochemicals ; isolation & purification ; pharmacology ; Sesquiterpenes ; isolation & purification ; pharmacology ; Thymelaeaceae ; chemistry ; Wood ; chemistry

BACKGROUND: Evidence on associations between occupational diesel exhaust and gasoline exposure and colorectal cancer is limited. We aimed to assess the effect of workplace exposure to diesel exhaust and gasoline on the risk of colorectal cancer. METHODS: This caseecontrol study included 181,709 colon cancer and 109,227 rectal cancer cases diagnosed between 1961 and 2005 in Finland, Iceland, Norway, and Sweden. Cases and controls were identified from the Nordic Occupational Cancer Study cohort and matched for country, birth year, and sex. Diesel exhaust and gasoline exposure values were assigned by country-specific job-exposure matrices. Odds ratios and 95% confidence intervals were calculated by using conditional logistic regression models. The results were adjusted for physical strain at work and occupational exposure to benzene, formaldehyde, ionizing radiation, chlorinated hydrocarbons, chromium, and wood dust. RESULTS: Diesel exhaust exposure was associated with a small increase in the risk of rectal cancer (odds ratio 1/4 1.05, 95% confidence interval 1.02–1.08). Gasoline exposure was not associated with colorectal cancer risk. CONCLUSION: This study showed a small risk increase for rectal cancer after workplace diesel exhaust exposure. However, this finding could be due to chance, given the limitations of the study.
Benzene ; Case-Control Studies ; Chromium ; Cohort Studies ; Colonic Neoplasms ; Colorectal Neoplasms ; Dust ; Finland ; Formaldehyde ; Gasoline ; Hydrocarbons, Chlorinated ; Iceland ; Logistic Models ; Norway ; Occupational Exposure ; Odds Ratio ; Parturition ; Radiation, Ionizing ; Rectal Neoplasms ; Scandinavian and Nordic Countries ; Sweden ; Vehicle Emissions ; Wood

BACKGROUND: The objective of this study is to evaluate the risk of exposure to second hand smoke (SHS) during working hours by job status and occupation. METHODS: Using the 4th Korean Working Conditions Survey (KWCS), 49,674 respondents who answered the question about SHS were studied. A chi-square test was carried out to determine whether there is a significant different in SHS exposure frequency by general and occupational characteristics and experience of discrimination at work and logistic regression analysis was carried out to identify the risk level of SHS exposure by variables. RESULTS: In this study, we found that male workers in their 40s and 50s, workers employed in workplaces with fewer than 50 employees, daily workers, and people working outdoors had a higher rate of exposure to SHS than the others. The top five occupations with the highest SHS exposure were construction and mining-related occupations, metal core-makers-related trade occupations, wood and furniture, musical instrument, and signboard-related trade occupations, transport and machine-related trade occupations, transport and leisure services occupations. The least five exposed occupations were public and enterprise senior officers, legal and administrative professions, education professionals, and health, social welfare, and religion-related occupations. CONCLUSION: Tobacco smoke is a significant occupational hazard. Smoking ban policy in the workplace can be a very effective way to reduce the SHS exposure rate in the workplace and can be more effective if specifically designed by the job status and various occupations.
Discrimination (Psychology) ; Education ; Humans ; Interior Design and Furnishings ; Leisure Activities ; Logistic Models ; Male ; Music ; Occupations ; Smoke ; Smoking ; Social Welfare ; Surveys and Questionnaires ; Tobacco ; Tobacco Smoke Pollution ; Wood

Radon is a naturally occurring radioactive material formed by the slow decay of uranium and thorium found in the earth's crust or construction materials. Internal exposure to radon accounts for about half of the natural background radiation dose to which humans are exposed annually. Radon is a carcinogen and is the second leading cause of lung cancer following smoking. An association between radon and lung cancer has been consistently reported in epidemiological studies on mine workers and the general population with indoor radon exposure. However, associations have not been clearly established between radon and other diseases, such as leukemia and thyroid cancer. Radiation doses are assessed by applying specific dose conversion coefficients according to the source (e.g., radon or thoron) and form of exposure (e.g., internal or external). However, regardless of the source or form of exposure, the effects of a given estimated dose on human health are identical, assuming that individuals have the same sensitivity to radiation. Recently, radiation exceeding the annual dose limit of the general population (1 mSv/yr) was detected in bed mattresses produced by D company due to the use of a monazite-based anion powder containing uranium and thorium. This has sparked concerns about the health hazards for mattress users caused by radiation exposure. In light of this event, this study presents scientific information about the assessment of radon and thoron exposure and its human implications for human health, which have emerged as a recent topic of interest and debate in society.
Background Radiation ; Beds ; Carcinogens ; Construction Materials ; Epidemiologic Studies ; Humans ; Korea ; Leukemia ; Lung Neoplasms ; Miners ; Radiation Exposure ; Radon ; Smoke ; Smoking ; Thorium ; Thyroid Neoplasms ; Uranium

In order to confirm the tradition that bolting Saposhnikoviae Radix could not be used as medicine,the content of four chromone components in the cortex and wood of Saposhnikoviae Radix was analyzed by high performance liquid chromatography( HPLC),and the chemical fingerprints were established,12 common peaks were calibrated. The similarity analysis found that the similarity between batches was 0. 115-0. 995,it indicates that the cortex and wood of Saposhnikoviae Radix have certain differences. On this basis,systematic clustering analysis,principal component analysis and orthogonal partial least squares discriminant analysis were carried out with the content of four chromone components and whether they met the pharmacopoeia criteria as the original variables. The results showed that the content of the four components in the cortex of Saposhnikoviae Radix was much higher than that in the wood,and the four components detected were able to distinguish the cortex and the wood of Saposhnikoviae Radix. The results of the study reveal the tradition that bolting Saposhnikoviae Radix should not be used as medicine dut to decreased quality.
Apiaceae/chemistry* ; Chromatography, High Pressure Liquid ; Drugs, Chinese Herbal/chemistry* ; Ketones/analysis* ; Plant Roots/chemistry* ; Wood/chemistry*