Objective: To determine the effect of the impacted position of the maxillary canine on the root resorption of the adjacent incisor using Cone-beam Computed Tomography (CBCT) imaging. Methods: This was an analytic quantitative study. The research sample determined CBCT images of treatment patients at the Orthodontic Specialist Policlinic in Dental Hospital of Airlangga University over a three-year period and secondary data taken from Pramita Laboratory. CBCT photos that met the inclusion criteria, including mesially impacted canine or close to central or lateral incisors with completely formed anatomy were then analyzed. Multiple linear regression was used to determine x-axis, y-axis, z-axis position of the impacted canine on the severity of root resorption of the adjacent incisor, and the effect of impacted canines on all axes simultaneously on the severity of root resorption of the adjacent incisors. Results: The position of the impacted canine in the x-axis and z-axis planes had a significant influence on the root resorption of the adjacent incisor. Meanwhile, impacted canine from the y-axis plane showed non-significant influence on the root resorption. Conclusion The position of the impacted canine when viewed in all planes of the tooth axis has a significant effect on the severity of root resorption of the adjacent incisor
Root Resorption ; Cone-Beam Computed Tomography

OBJECTIVES: This study aimed to investigate the feasibility of measuring the soft tissue height of bone cristae around implant by digital method. METHODS: A total of 36 patients with dental implants were selected from the Dental Medicine Center of the First Affiliated Hospital of University of Science and Technology of China (Anhui Provincial Hospital) from August 2022 to December 2022. A total of 43 dental implants were enrolled. All postoperative cone beam CT (CBCT) imaging data and intraoral digital impressions obtained before surgery were immediately obtained by the patients on the day of completion of oral implant surgery and they were imported into oral implant surgery planning software for image fitting. Then, virtual implants of the same specification were placed in the planting area, and the implant position was adjusted to overlap with the implant shadow in the CBCT image. Supracrestal tissue height (STH) was measured at the implant view interface (digital group). During the operation, implant holes were prepared step by step in accordance with the standard preparation method, and implants were implanted. The upper edge of the implant was flushed with the crest of the alveolar ridge. STH was measured by perio-dontal probing (periodontal probe group). Paired t-test was used to compare the STH differences between the digital and periodontal probe groups. Bland-Altman test was used to analyze the consistency of the two methods. Intra-group correlation coefficient (ICC) was used to verify the reliability of the results measured by different surveyors using di-gital methods. RESULTS: No statistical significance was observed in the STH difference between the two methods (P>0.05). Bland-Altman test showed good consistency between the two methods, but the measurement of mandibular posterior teeth showed that the results of periodontal probe were greater than those of digital method. The ICC and 95%CI of the STH results measured digitally by different surveyors are 0.992 (0.986-0.996). CONCLUSIONS The digital me-thod is in good agreement with the periodontal probe method in measuring the soft tissue height of the bone cristae around the implant.
Humans ; Alveolar Process/diagnostic imaging* ; Cone-Beam Computed Tomography/methods* ; Dental Implants ; Feasibility Studies ; Reproducibility of Results ; Tooth/diagnostic imaging*

Using digital technologies in concurrently performing missing tooth implantation and preparation of remaining teeth is a solution to reduce the number of visits and improve efficiency. This paper proposes a digital process for simultaneously implanting and preparing teeth. It integrates implant surgical guide and 3D-printed tooth preparation guide into a single guide and completes guided implant placement and precise tooth preparation. Based on "repair-oriented" virtual implant planning, the implant surgical guide can improve the efficiency and predictability of implant placement, and its linear accuracy is about 1 mm. The tooth preparation guide precisely guides tooth preparation and restoration space visualization, ensuring the quality of the tooth preparation. The two guides have different design accuracy requirements, and thus their combination improves the overall guiding accuracy requirements. The concurrent application of the two guides minimizes the clinical operation time, number of visits, and economic burden of patients.
Humans ; Surgery, Computer-Assisted ; Dental Implantation, Endosseous ; Printing, Three-Dimensional ; Technology ; Tooth Preparation ; Computer-Aided Design ; Dental Implants ; Imaging, Three-Dimensional ; Cone-Beam Computed Tomography

For patients with partial jaw defects, cysts and dental implants, doctors need to take panoramic X-ray films or manually draw dental arch lines to generate Panorama images in order to observe their complete dentition information during oral diagnosis. In order to solve the problems of additional burden for patients to take panoramic X-ray films and time-consuming issue for doctors to manually segment dental arch lines, this paper proposes an automatic panorama reconstruction method based on cone beam computerized tomography (CBCT). The V-network (VNet) is used to pre-segment the teeth and the background to generate the corresponding binary image, and then the Bezier curve is used to define the best dental arch curve to generate the oral panorama. In addition, this research also addressed the issues of mistakenly recognizing the teeth and jaws as dental arches, incomplete coverage of the dental arch area by the generated dental arch lines, and low robustness, providing intelligent methods for dental diagnosis and improve the work efficiency of doctors.
Humans ; Radiography, Panoramic/methods* ; Cone-Beam Computed Tomography/methods* ; Head ; Image Processing, Computer-Assisted/methods*

This article briefly describes the imaging performance standards of the kilovolt X-ray image guidance system used in radiotherapy, analyzes the main aspects that should be considered in the image quality of X-IGRT system, and focuses on parameters that should be considered in the imaging performance evaluation criteria of the CBCT X-IGRT. The purpose is to sort out the imaging performance evaluation standards of kilovolt X-IGRT system, clarify the image quality requirements of X-IGRT equipment, and reach a consensus when evaluating the imaging performance of X-IGRT system.
Radiotherapy Planning, Computer-Assisted/methods* ; Cone-Beam Computed Tomography/methods* ; Spiral Cone-Beam Computed Tomography ; Radiotherapy, Intensity-Modulated/methods* ; Radiotherapy, Image-Guided/methods*

Digital guided therapy (DGT) has been advocated as a contemporary computer-aided technique for treating endodontic diseases in recent decades. The concept of DGT for endodontic diseases is categorized into static guided endodontics (SGE), necessitating a meticulously designed template, and dynamic guided endodontics (DGE), which utilizes an optical triangulation tracking system. Based on cone-beam computed tomography (CBCT) images superimposed with or without oral scan (OS) data, a virtual template is crafted through software and subsequently translated into a 3-dimensional (3D) printing for SGE, while the system guides the drilling path with a real-time navigation in DGE. DGT was reported to resolve a series of challenging endodontic cases, including teeth with pulp obliteration, teeth with anatomical abnormalities, teeth requiring retreatment, posterior teeth needing endodontic microsurgery, and tooth autotransplantation. Case reports and basic researches all demonstrate that DGT stand as a precise, time-saving, and minimally invasive approach in contrast to conventional freehand method. This expert consensus mainly introduces the case selection, general workflow, evaluation, and impact factor of DGT, which could provide an alternative working strategy in endodontic treatment.
Humans ; Consensus ; Endodontics/methods* ; Tooth ; Printing, Three-Dimensional ; Dental Care ; Cone-Beam Computed Tomography ; Root Canal Therapy

Objective:To explore the effect of fully automatic image segmentation of adenoid and nasopharyngeal airway by deep learning model based on U-Net network. Methods:From March 2021 to March 2022, 240 children underwent cone beam computed tomography（CBCT） in the Department of Otolaryngology, Head and Neck Surgery, General Hospital of Shenzhen University. 52 of them were selected for manual labeling of nasopharynx airway and adenoid, and then were trained and verified by the deep learning model. After applying the model to the remaining data, compare the differences between conventional two-dimensional indicators and deep learning three-dimensional indicators in 240 datasets. Results:For the 52 cases of modeling and training data sets, there was no significant difference between the prediction results of deep learning and the manual labeling results of doctors（P>0.05）. The model evaluation index of nasopharyngeal airway volume: Mean Intersection over Union（MIOU） s （86.32±0.54）%; Dice Similarity Coefficient（DSC）: （92.91±0.23）%; Accuracy: （95.92±0.25）%; Precision: （91.93±0.14）%; and the model evaluation index of Adenoid volume: MIOU: （86.28±0.61）%; DSC: （92.88±0.17）%; Accuracy: （95.90±0.29）%; Precision: （92.30±0.23）%. There was a positive correlation between the two-dimensional index A/N and the three-dimensional index AV/（AV+NAV） in 240 children of different age groups（P<0.05）, and the correlation coefficient of 9-13 years old was 0.74. Conclusion:The deep learning model based on U-Net network has a good effect on the automatic image segmentation of adenoid and nasopharynx airway, and has high application value. The model has a certain generalization ability.
Child ; Humans ; Adolescent ; Adenoids/diagnostic imaging* ; Image Processing, Computer-Assisted/methods* ; Pharynx ; Cone-Beam Computed Tomography ; Nose

Objective: To measure and analyze the morphometric changes in the anterior alveolar bone during treatment and retention stage after retraction in bimaxillary adults using cone-beam CT(CBCT). Methods: Fifteen adult patients, four males and 11 females, aged 19 to 28 years[(22.2±3.1) years], who have completed orthodontic treatment and extracted four first premolar teeth for retraction in the Department of Orthodontics, The Affiliated Stomatological Hospital of Nanchang University from January 2016 to December 2018 were selected. CBCT was taken to assess the labial and palatal vertical bone level, total bone thickness at crest area, middle root area and apical area in pre-treatment (T1), post-treatment (T2) and at follow-up (maintained for more than two years) (T3). The differences in alveolar bone morphology at different stages were compared by single factor repeated measure ANOVA, and Pearson correlation analysis was performed on the amount of alveolar bone change in treatment stage and retention stage. Results: There were statistically significant differences in the alveolar bone height of the palatal side of maxillary anterior teeth, the labial side of maxillary lateral incisors and canine among three time points (P<0.05). The height difference of palatal alveolar bone of anterior teeth in T1-T2 stage was statistically significant (P<0.05). Palatal alveolar bone of upper and lower central incisors decreased by (1.52±0.32) and (4.96±0.46) mm, respectively. The height difference of anterior palatal alveolar bone was statistically significant in T2-T3 stage(P<0.05), the palatal alveolar bone height of central incisors increased by (1.20±0.27) and (3.14±0.35) mm respectively. The height difference of palatal alveolar bone in the anterior teeth of T1-T3 stage was statistically significant (P<0.05), and the height of palatal alveolar bone of central incisors was decreased (0.33±0.11) and (1.82±0.39) mm, respectively. There were statistically significant differences in the thickness of the cervical and middle root alveolar bone of anterior teeth among three time points (P<0.05). The difference of alveolar bone thickness of the cervical and middle root of anterior teeth at T1-T2 was statistically significant (P<0.05). decreased by (0.63±0.10) and (0.67±0.09) mm in lateral incisors, respectively. In the T2-T3 stage, the alveolar bone thickness of the crest area of the lower anterior teeth was significantly different (P<0.05), the alveolar bone thickness of mandibular central incisor crest area increased (0.09±0.03) mm. There were statistically significant differences in alveolar bone thickness in crest area and middle root of the incisors during T1-T3 stage (P<0.05), among which the middle root decreased by (0.38±0.16) mm and (0.63±0.13) mm, respectively. There was no statistically significant difference in other areas (P>0.05). The change of alveolar bone height in palatal side of upper anterior teeth at T2-T3 was very strongly negatively correlated with the change in T1-T2. The change of alveolar bone height in labial side of upper anterior teeth and lingual side of lower anterior teeth and the thickness of incisor root and neck were moderately strongly negatively correlated (r≤-0.8, P<0.001), the change of alveolar bone height in labial side of upper anterior teeth and lingual side of lower anterior teeth and the thickness of incisor crest area were moderately strongly negatively correlated (-0.8<r≤-0.4, P<0.05). Conclusions: For adult patients after retraction, anterior alveolar bone decreased significantly. In the retention stage, the same degree of bone apposition will occur, but still have alveolar bone loss compared with pre-treatment. The amount of alveolar bone change in the retention stage correlated with the amount of alveolar bone change in the treatment stage.
Male ; Female ; Humans ; Maxilla/diagnostic imaging* ; Cone-Beam Computed Tomography ; Tooth Root ; Malocclusion ; Palate

OBJECTIVE: To evaluate the changes of periodontal phenotype (width of keratinized gingiva, thickness and height of alveolar bone) of lower anterior teeth in patients with skeletal class Ⅲ malocclusion before and after the periodontal-orthodontic-orthognathic combined treatment. METHODS: In the study, 20 patients with skeletal class Ⅲ malocclusion (6 males and 14 females) completed the periodontal-orthodontic-orthognathic combined treatment were included from March 2017 to June 2022, with 39 central incisors, 40 lateral incisors and 40 canines. The mean age was (25.40±4.27) years (20-34 years). The mean follow-up time was (3.70±1.05) years from the beginning of periodontal corticotomy regenerative surgery (PCRS) to the end of the combined treatment. Cone-beam computed tomography (CBCT) was used to measure the thickness, area and height of alveolar bone by the same researcher, taken before the PCRS (T0), 6 months after the PCRS (T1), 12 months after the PCRS (T2), before the orthognathic surgery (T3), and after the periodontal-orthodontic-orthognathic combined treatment (T4). The periodontal clinical parameters were used to evaluate changes in the soft tissue by another researcher, measured before the PCRS (T0) and after the combined treatment (T4). Changes of soft and hard tissue were evaluated by the periodontal phenotype. RESULTS: The width of keratinized gingiva increased significantly (all P < 0.001) in lower anterior teeth, the central incisors, lateral incisors and canines increased by (1.82±1.57) mm, (2.03±1.48) mm and (2.05±1.27) mm, respectively. The proportion of thick periodontal biotype in the central and lateral incisors increased significantly (all P < 0.001), while the changes of periodontal biotypes in the lower canines were not obvious. The thickness of labial alveolar bone of lower anterior teeth all increased significantly after periodontal corticotomy regenerative surgery and the combined treatment (all P < 0.001). The area of labial alveolar bone of lower anterior teeth also increased significantly after the combined treatment (all P < 0.001). The whole area of labial and lingual alveolar bone of central and lateral incisors increased (P < 0.001), while the whole area of canines remained the same. All The height of the alveolar bone increased (all P < 0.001) on the labial side after the treatment. CONCLUSION The periodontal phenotypes of lower anterior teeth were significantly improved after the periodontal-orthodontic-orthognathic combined treatment in patients with skeletal Angle class Ⅲ malocclusion. The improvement was long-termly stable, and the periodontal risk was reduced.
Male ; Female ; Humans ; Malocclusion, Angle Class III/surgery* ; Oral Surgical Procedures ; Incisor ; Cone-Beam Computed Tomography/methods*

OBJECTIVE: To evaluate the decompensation effectiveness and alveolar bone remodeling of mandibular anterior teeth after preoperative orthodontic treatment in high-angle patients with skeletal class Ⅱ malocclusion using lateral cephalogram and cone-beam computed tomography (CBCT). METHODS: Thirty high-angle patients with skeletal class Ⅱ malocclusion who had received preoperative orthodontic treatment and orthognathic surgery in Peking University School and Hospital of Stomatology between Ja-nuary 2017 and August 2022 and had taken lateral cephalogram and CBCT before and after preoperative orthodontic treatment were selected. Items were measured with lateral cephalogram including: The lower central incisor (L1)-Frankfort plane angle (L1-FH), the L1-mandibular plane angle (L1-MP), the L1-nasion-supramental angle (L1-NB) and the vertical distance from the incisal edge of lower central incisor to NB line (L1-NB distance), etc. The incidence of dehiscence/fenestration and the length of dehiscence at labial side (d-La) and lingual side (d-Li) were measured using CBCT. Pearson correlation analysis was used to evaluate the correlation between the changes of d-Li of L1 and age, duration of preoperative orthodontic treatment and the cephalometric measurements before preoperative orthodontic treatment to screen out risk factors affecting the periodontal risk of preoperative orthodontic treatment in high-angle patients with skeletal class Ⅱ malocclusions. RESULTS: After preoperative orthodontic treatment, L1-FH, L1-MP, L1-NB and L1-NB distances changed by 11.56°±5.62°, -11.13°±5.53°, -11.57°±5.43° and (-4.99±1.89) mm, respectively, and the differences were all statistically significant (P < 0.05). Among the 180 measured mandibular anterior teeth, 45 cases with labial dehiscence/fenestration before preoperative orthodontic treatment (T0) had no longer labial dehiscence/fenestration after preope-rative orthodontic treatment (T1); 142 cases without lingual dehiscence/fenestration at T0 had lingual dehiscence/fenestration at T1. After preoperative orthodontic treatment, the d-La of lower lateral incisors (L2), lower canines (L3) and lower anterior teeth (L1+L2+L3) decreased by (0.95±2.22) mm, (1.20±3.23) mm and (0.68±2.50) mm, respectively, and the differences were statistically significant (P < 0.05); the d-Li of L1, L2, L3 and L1+L2+L3 increased by (4.43±1.94) mm, (4.53±2.35) mm, (3.19±2.80) mm and (4.05±2.46) mm, respectively, and the differences were statistically significant (P < 0.05). The increase of d-Li of L1 was positively correlated with L1-FH (r=0.373, P=0.042). CONCLUSION This study showed that high-angle patients with skeletal class Ⅱ ma-locclusion could achieve ideal decompensation effect of mandibular anterior teeth after preoperative orthodontic treatment with bilateral mandibular first premolars extracted, but the lingual periodontal risk of mandibular anterior teeth was increased. This risk could be correlated to L1-FH before preoperative orthodontic treatment, which should be paid more attention in the design of orthodontic-orthognathic surgical treatment.
Humans ; Malocclusion, Angle Class III ; Malocclusion, Angle Class II/surgery* ; Facial Bones ; Incisor ; Orthognathic Surgical Procedures ; Cone-Beam Computed Tomography ; Mandible