OBJECTIVES: This study aimed to investigate the feasibility of measuring the soft tissue height of bone cristae around implant by digital method. METHODS: A total of 36 patients with dental implants were selected from the Dental Medicine Center of the First Affiliated Hospital of University of Science and Technology of China (Anhui Provincial Hospital) from August 2022 to December 2022. A total of 43 dental implants were enrolled. All postoperative cone beam CT (CBCT) imaging data and intraoral digital impressions obtained before surgery were immediately obtained by the patients on the day of completion of oral implant surgery and they were imported into oral implant surgery planning software for image fitting. Then, virtual implants of the same specification were placed in the planting area, and the implant position was adjusted to overlap with the implant shadow in the CBCT image. Supracrestal tissue height (STH) was measured at the implant view interface (digital group). During the operation, implant holes were prepared step by step in accordance with the standard preparation method, and implants were implanted. The upper edge of the implant was flushed with the crest of the alveolar ridge. STH was measured by perio-dontal probing (periodontal probe group). Paired t-test was used to compare the STH differences between the digital and periodontal probe groups. Bland-Altman test was used to analyze the consistency of the two methods. Intra-group correlation coefficient (ICC) was used to verify the reliability of the results measured by different surveyors using di-gital methods. RESULTS: No statistical significance was observed in the STH difference between the two methods (P>0.05). Bland-Altman test showed good consistency between the two methods, but the measurement of mandibular posterior teeth showed that the results of periodontal probe were greater than those of digital method. The ICC and 95%CI of the STH results measured digitally by different surveyors are 0.992 (0.986-0.996). CONCLUSIONS The digital me-thod is in good agreement with the periodontal probe method in measuring the soft tissue height of the bone cristae around the implant.
Humans ; Alveolar Process/diagnostic imaging* ; Cone-Beam Computed Tomography/methods* ; Dental Implants ; Feasibility Studies ; Reproducibility of Results ; Tooth/diagnostic imaging*

For patients with partial jaw defects, cysts and dental implants, doctors need to take panoramic X-ray films or manually draw dental arch lines to generate Panorama images in order to observe their complete dentition information during oral diagnosis. In order to solve the problems of additional burden for patients to take panoramic X-ray films and time-consuming issue for doctors to manually segment dental arch lines, this paper proposes an automatic panorama reconstruction method based on cone beam computerized tomography (CBCT). The V-network (VNet) is used to pre-segment the teeth and the background to generate the corresponding binary image, and then the Bezier curve is used to define the best dental arch curve to generate the oral panorama. In addition, this research also addressed the issues of mistakenly recognizing the teeth and jaws as dental arches, incomplete coverage of the dental arch area by the generated dental arch lines, and low robustness, providing intelligent methods for dental diagnosis and improve the work efficiency of doctors.
Humans ; Radiography, Panoramic/methods* ; Cone-Beam Computed Tomography/methods* ; Head ; Image Processing, Computer-Assisted/methods*

This article briefly describes the imaging performance standards of the kilovolt X-ray image guidance system used in radiotherapy, analyzes the main aspects that should be considered in the image quality of X-IGRT system, and focuses on parameters that should be considered in the imaging performance evaluation criteria of the CBCT X-IGRT. The purpose is to sort out the imaging performance evaluation standards of kilovolt X-IGRT system, clarify the image quality requirements of X-IGRT equipment, and reach a consensus when evaluating the imaging performance of X-IGRT system.
Radiotherapy Planning, Computer-Assisted/methods* ; Cone-Beam Computed Tomography/methods* ; Spiral Cone-Beam Computed Tomography ; Radiotherapy, Intensity-Modulated/methods* ; Radiotherapy, Image-Guided/methods*

Digital guided therapy (DGT) has been advocated as a contemporary computer-aided technique for treating endodontic diseases in recent decades. The concept of DGT for endodontic diseases is categorized into static guided endodontics (SGE), necessitating a meticulously designed template, and dynamic guided endodontics (DGE), which utilizes an optical triangulation tracking system. Based on cone-beam computed tomography (CBCT) images superimposed with or without oral scan (OS) data, a virtual template is crafted through software and subsequently translated into a 3-dimensional (3D) printing for SGE, while the system guides the drilling path with a real-time navigation in DGE. DGT was reported to resolve a series of challenging endodontic cases, including teeth with pulp obliteration, teeth with anatomical abnormalities, teeth requiring retreatment, posterior teeth needing endodontic microsurgery, and tooth autotransplantation. Case reports and basic researches all demonstrate that DGT stand as a precise, time-saving, and minimally invasive approach in contrast to conventional freehand method. This expert consensus mainly introduces the case selection, general workflow, evaluation, and impact factor of DGT, which could provide an alternative working strategy in endodontic treatment.
Humans ; Consensus ; Endodontics/methods* ; Tooth ; Printing, Three-Dimensional ; Dental Care ; Cone-Beam Computed Tomography ; Root Canal Therapy

Objective:To explore the effect of fully automatic image segmentation of adenoid and nasopharyngeal airway by deep learning model based on U-Net network. Methods:From March 2021 to March 2022, 240 children underwent cone beam computed tomography（CBCT） in the Department of Otolaryngology, Head and Neck Surgery, General Hospital of Shenzhen University. 52 of them were selected for manual labeling of nasopharynx airway and adenoid, and then were trained and verified by the deep learning model. After applying the model to the remaining data, compare the differences between conventional two-dimensional indicators and deep learning three-dimensional indicators in 240 datasets. Results:For the 52 cases of modeling and training data sets, there was no significant difference between the prediction results of deep learning and the manual labeling results of doctors（P>0.05）. The model evaluation index of nasopharyngeal airway volume: Mean Intersection over Union（MIOU） s （86.32±0.54）%; Dice Similarity Coefficient（DSC）: （92.91±0.23）%; Accuracy: （95.92±0.25）%; Precision: （91.93±0.14）%; and the model evaluation index of Adenoid volume: MIOU: （86.28±0.61）%; DSC: （92.88±0.17）%; Accuracy: （95.90±0.29）%; Precision: （92.30±0.23）%. There was a positive correlation between the two-dimensional index A/N and the three-dimensional index AV/（AV+NAV） in 240 children of different age groups（P<0.05）, and the correlation coefficient of 9-13 years old was 0.74. Conclusion:The deep learning model based on U-Net network has a good effect on the automatic image segmentation of adenoid and nasopharynx airway, and has high application value. The model has a certain generalization ability.
Child ; Humans ; Adolescent ; Adenoids/diagnostic imaging* ; Image Processing, Computer-Assisted/methods* ; Pharynx ; Cone-Beam Computed Tomography ; Nose

OBJECTIVE: To evaluate the changes of periodontal phenotype (width of keratinized gingiva, thickness and height of alveolar bone) of lower anterior teeth in patients with skeletal class Ⅲ malocclusion before and after the periodontal-orthodontic-orthognathic combined treatment. METHODS: In the study, 20 patients with skeletal class Ⅲ malocclusion (6 males and 14 females) completed the periodontal-orthodontic-orthognathic combined treatment were included from March 2017 to June 2022, with 39 central incisors, 40 lateral incisors and 40 canines. The mean age was (25.40±4.27) years (20-34 years). The mean follow-up time was (3.70±1.05) years from the beginning of periodontal corticotomy regenerative surgery (PCRS) to the end of the combined treatment. Cone-beam computed tomography (CBCT) was used to measure the thickness, area and height of alveolar bone by the same researcher, taken before the PCRS (T0), 6 months after the PCRS (T1), 12 months after the PCRS (T2), before the orthognathic surgery (T3), and after the periodontal-orthodontic-orthognathic combined treatment (T4). The periodontal clinical parameters were used to evaluate changes in the soft tissue by another researcher, measured before the PCRS (T0) and after the combined treatment (T4). Changes of soft and hard tissue were evaluated by the periodontal phenotype. RESULTS: The width of keratinized gingiva increased significantly (all P < 0.001) in lower anterior teeth, the central incisors, lateral incisors and canines increased by (1.82±1.57) mm, (2.03±1.48) mm and (2.05±1.27) mm, respectively. The proportion of thick periodontal biotype in the central and lateral incisors increased significantly (all P < 0.001), while the changes of periodontal biotypes in the lower canines were not obvious. The thickness of labial alveolar bone of lower anterior teeth all increased significantly after periodontal corticotomy regenerative surgery and the combined treatment (all P < 0.001). The area of labial alveolar bone of lower anterior teeth also increased significantly after the combined treatment (all P < 0.001). The whole area of labial and lingual alveolar bone of central and lateral incisors increased (P < 0.001), while the whole area of canines remained the same. All The height of the alveolar bone increased (all P < 0.001) on the labial side after the treatment. CONCLUSION The periodontal phenotypes of lower anterior teeth were significantly improved after the periodontal-orthodontic-orthognathic combined treatment in patients with skeletal Angle class Ⅲ malocclusion. The improvement was long-termly stable, and the periodontal risk was reduced.
Male ; Female ; Humans ; Malocclusion, Angle Class III/surgery* ; Oral Surgical Procedures ; Incisor ; Cone-Beam Computed Tomography/methods*

OBJECTIVE: To investigate the clinical application of cone-beam computed tomography (CBCT) among endodontic practitioners, and to analyze the indications and reasonability of CBCT in the diagnosis and treatment of pulpal and periapical diseases. METHODS: The clinical data were collected from patients who visited the Department of Cariology and Endodontology, Peking University School and Hospital of Stomatology and underwent CBCT examination from January to December, 2021. The data with their complete clinical information (including clinical records, radiology request forms/reports, two-dimensional and three-dimensional imaging data) were included. Those who underwent CBCT examination for orthodontic or prosthodontics were excluded. The experience and training background of the endodontic specialists, the number of patients treated in the whole year, the objective and region of interest (ROI) of CBCT examination, technical parameters, such as machine type, field of view (FoV) and radiographic reports were collected and analyzed to evaluate the impact on diagnosis. Wilcoxon and Mann-Whitney tests were used to compare the distribution of CBCT ROI. Chi-squared test and pairwise comparison were used to compare the application of CBCT by endodontic specialists with different clinical experience (senior, middle and junior). RESULTS: In 2021, a total of 3 308 CBCT scans were prescribed by 61 endodontic specialists who treated 34 952 patients throughout the year. 3 218 patients (male ∶female about 1 ∶2) amounting for 10% of the patients treated in the whole year who received CBCT scans with an median age of 35 years (28, 49). Around 98% CBCT examinations were performed after clinical examination and two-dimensional periapical radiographs were taken. The FoV of CBCT scanning less than 10 cm×10 cm accounted for 96% of the total number of the images. Among the 3 308 CBCT scans, 83% of the ROI were in posterior teeth, with a higher number of anterior teeth (Z=-2.278, P < 0.05). Maxillary and mandibular first molars accounted for 35% of the examined teeth. The objectives of CBCT scanning included three aspects: clarifying clinical diagnosis, guiding surgical and non-surgical endodontic treatment (including management of endodontic complications), and outcome assessment, accounting for 1 111 (34%), 1 745 (54%), 311 (10%), respectively. and the others 2%. In the diagnosis process, CBCT was mainly used for the diagnosis of chronic periapical periodontitis, root fracture, root resorption and dental trauma. In the study, 353 CBCT were used in the diagnosis of root fracture, with a positive diagnosis rate of 35% (125/353). 846 CBCT used to reveal the anatomy of the root canal system, of which 297 cases were used to find missed/extra canals after treatment failure, and 58% (171/297) were used to confirm the missed/extra canals. In the management of complications or errors, CBCT was mainly used to assist the diagnosis of perforation and to locate the separated instruments. In the study, 311 CBCT scans were used for outcome assessment, including 240 cases related to non-surgical treatment and 71 cases related to surgical endodontic treatment for follow-up or presence of clinical symptoms, and persistent lesions on 2D films. Among the 61 endodontic specialists who used CBCT, 23 (45%) were with senior experience, 15 (30%) with middle experience, and 23 (25%) with junior experience. The proportion of senior or junior experience prescribing CBCT examination was 10%, higher than that of middle experience (8%, χ₁²=39.4, χ₂²=29.1, P < 0.001). The application rate of chief endodontists was 18%, which was higher than that of associate chief endodontists (9%, χ₁²=139.4, P < 0.001). 31% (1 109/3 308) cases of diagnosis or treatment plans were changed after CBCT was taken. CONCLUSION Use of CBCT in endodontic practice could provide more clinical information, which is helpful for diagnosis, accurate treatment and prognosis evaluation.
Humans ; Male ; Adult ; Prevalence ; Root Canal Therapy/methods* ; Cone-Beam Computed Tomography/methods* ; Tooth ; Imaging, Three-Dimensional

OBJECTIVE: To study the effect of various intracanal materials on the accuracy of oral maxillofacial cone-beam computed tomography (CBCT) for the diagnosis of vertical root fracture (VRF). METHODS: A total of twenty-four structurally intact single root canal dried and isolated teeth extracted for orthodontic treatment or periodontal disease were collected. The teeth were decrowned along the cemento-enamel junction (CEJ) and then used as samples for the study after conventional root canal preparation and post preparation. The 24 samples were divided into two groups with 12 samples in each group. Group A was the control group (no VRF group). According to intracanal materials, they were divided into five subgroups: blank group, fiber post group, gutta-percha point group, titanium post group and gold-palladium post group. Group B was the experimental group (VRF group), and subgroups were grouped as above. The VRF model was prepared by a unified method in the VRF group: the root was completely fractured in the buccolingual direction with a custom root canal nail and then cemented and reset. The control group was not subjected to the simulation of VRF. Titanium post and gold-palladium post were made according to the individuality of the root canal preparation, and the tightness of the post to the root canal wall was confirmed by X-ray radiograph. Then all the samples were scanned by CBCT in the isolate swine mandibular alveolar sockets. The diagnostic accuracy was statistically analyzed via blind interpretation by experienced endodontic specialists and oral and maxillofacial medical imaging specialists. RESULTS: The accuracy of the diagnosis of VRF in the blank group, fiber post group, gutta-percha point group, titanium post group, and gold-palladium post group in CBCT was 95.83%, 91.67%, 87.50%, 79.17%, and 45.83%, respectively. Compared with the blank group, the differences were not statistically significant in the fiber post group (P>0.999), the gutta-percha point group (P=0.500) and the titanium post group (P=0.125). The lowest diagnostic accuracy of VRF was found in the gold-palladium post group, and the difference was statistically significant compared with all other groups (P < 0.001). CONCLUSION Various intracanal materials have different degrees of influence on the diagnostic accuracy of VRF diagnosis in CBCT. The influence of fiber post, gutta-percha point and titanium post was small, while the influence of gold-palladium post was significant.
Animals ; Cone-Beam Computed Tomography/methods* ; Gold ; Gutta-Percha ; Palladium ; Swine ; Titanium ; Tooth Fractures/diagnostic imaging* ; Tooth Root/injuries* ; Reproducibility of Results

OBJECTIVE: To assess three-dimensional (3D) changes of circummaxillary sutures following maxillary protraction with alternate rapid palatal expansions and constrictions (RPE/C) facemask protocol in maxillary retrusive children, and to investigate the relationship between the changes of circum-maxillary sutures and zygomaticomaxillary suture (ZMS) maturation, and to explore the factors of maxilla forward movement with RPE/C and facemask. METHODS: In the study (clinical trial registration No: ChiCTR2000034909), 36 maxillary retrusive patients were recruited and block randomized to either the rapid palatal expansion (RPE) group or the RPE/C group. Patients aged 7 to 13 years, Class Ⅲ malocclusion, anterior crossbite, ANB less than 0°, Wits appraisal less than -2 mm, and A-Np less than 0 mm were included in the study. The RPE group received rapid palatal expansion, whereas the RPE/C group received alternate rapid palatal expansions and constrictions, and both with facemask protraction. Head orientations of cone-beam computed tomography (CBCT) images were implemented by Dolphin 11.7. 3D measurements of circummaxillary sutures on CBCT images were evaluated using Mimics 10.01 before (T0) and after treatment (T1). The changes were analyzed with independent t test, two-way ANOVA, Pearson correlation and regression analysis. RESULTS: Two subjects in the RPE/C group were lost to follow-up. A total of 34 patients reached the completion criteria and were analyzed. Compared with the RPE group, sagittal changes of circummaxillary sutures were significantly increased in the RPE/C group with 1.21 mm advancement of zygomaticotemporal suture, 2.20 mm of ZMS, 1.43 mm of zygoma-ticofrontal suture (P < 0.05, respectively). Except for the zygomaticotemporal suture, the rest forward sagittal changes of other circummaxillary sutures showed no major difference in terms of the ZMS maturation. The Spearman's correlation in RPE/C indicated a strong positive correlation of sagittal changes between ZMS and point A (P < 0.01) with a regression analysis R²=42.5%. CONCLUSION RPE/C might be more effective on the treatment of maxillary retrusive children. As one of the major mechanical loading sutures during orthopedic therapy, ZMS showed a strong positive correlation with point A on sagittal changes.
Cone-Beam Computed Tomography/methods* ; Constriction ; Humans ; Malocclusion, Angle Class III/therapy* ; Maxilla/diagnostic imaging* ; Palatal Expansion Technique ; Sutures

During the automatic reconstruction of panoramic images, the effect of dental arch curve fitting will affect the integrity of the content of the panoramic image. Metal implants in the patient's mouth usually lead to a decrease in the contrast of the panoramic image, which affects the doctor's diagnosis. In this paper, an automatic oral panoramic image reconstruction method was proposed. By calculating key image areas and image extraction fusion algorithms, the dental arch curve could be automatically detected and adjusted on a small number of images, and the intensity distribution of teeth, bone tissue and metal implants on the image could be adjusted to reduce the impact of metal on other tissues, to generate high-quality panoramic images. The method was tested on 50 cases of cone beam computed tomography (CBCT) data with good results, which can effectively improve the quality of panoramic images.
Humans ; Radiography, Panoramic/methods* ; Cone-Beam Computed Tomography/methods* ; Tooth ; Algorithms ; Image Processing, Computer-Assisted/methods*