Background: This study analyzed occupational diseases compensated through the government system in the Korean electronics industry and observed changes in the rationale for compensation. Methods: Data from the Korea Workers’ Compensation and Welfare Service (KWCWS) from 2012 to 2023 were analyzed to examine occupational disease issues in South Korea's semiconductor and display industries. Results: KWCWS received 174 occupational disease claims between 2012 and 2023, with 88 (50.6%) approved. The case of a 22-year-old semiconductor worker who died from leukemia has raised awareness and appears to be leading to more claims and higher approval rates. Cancer-related claims, particularly for breast and blood cancers, were the most common. Since 2018, the approval rate for occupational diseases has increased to 60%, which may have been influenced by the Supreme Court's Principle of Presumption of Occupational Diseases and the government’s reduction of the burden of proof. However, approval rates remain lower in small- and medium-sized enterprises (38.0%) compared to large corporations (55.6%), likely because of better documentation and unionization in the latter. The semiconductor industry had more claims and approvals than the LCD industry, primarily due to its longer operational history and greater chemical exposure. Conclusions In South Korea, the increasing approval rate of occupational diseases in the electronics industry from 2012 to 2023 appears to reflect changes in how causal relationships and occupational health policies have been implemented and this is likely due to stakeholder involvement and relevant legal decisions.

Objective: We evaluated the occupational exposure levels of healthcare workers while conducting rotational pressurized intraperitoneal aerosol chemotherapy (RIPAC) using cisplatin in a large animal model. Methods: We performed RIPAC using cisplatin in 6 female pigs and collected surface and air samples during the procedure. Surface samples were obtained from RIPAC devices and personal protective equipment (PPE) by wiping, and air samples were collected around the operating table.All samples were analyzed by inductively coupled plasma–mass spectrometry to detect platinum. Results: Among all surface samples (n=44), platinum was detected in 41 samples (93.2%) but not in all air samples (n=16). Among samples collected from RIPAC devices (n=23), minimum and maximum cisplatin levels of 0.08 and 235.09 ng/cm2 were detected, mainly because of direct aerosol exposure in the abdominal cavity. Among samples collected from healthcare workers’ PPE (n=21), 18 samples (85.7%) showed contamination levels below the detection limit, with a maximum of 0.23 ng/cm2 . There was no significant contamination among samples collected from masks, shoes, or gloves. Conclusion During the RIPAC procedures, there is a potential risk of dermal exposure, as platinum, a surrogate material for cisplatin, was detected at low concentration levels in some surface samples. However, the respiratory exposure risk was not identified, as platinum was not detected in the airborne samples in this study.

Background: This study analyzed occupational diseases compensated through the government system in the Korean electronics industry and observed changes in the rationale for compensation. Methods: Data from the Korea Workers’ Compensation and Welfare Service (KWCWS) from 2012 to 2023 were analyzed to examine occupational disease issues in South Korea's semiconductor and display industries. Results: KWCWS received 174 occupational disease claims between 2012 and 2023, with 88 (50.6%) approved. The case of a 22-year-old semiconductor worker who died from leukemia has raised awareness and appears to be leading to more claims and higher approval rates. Cancer-related claims, particularly for breast and blood cancers, were the most common. Since 2018, the approval rate for occupational diseases has increased to 60%, which may have been influenced by the Supreme Court's Principle of Presumption of Occupational Diseases and the government’s reduction of the burden of proof. However, approval rates remain lower in small- and medium-sized enterprises (38.0%) compared to large corporations (55.6%), likely because of better documentation and unionization in the latter. The semiconductor industry had more claims and approvals than the LCD industry, primarily due to its longer operational history and greater chemical exposure. Conclusions In South Korea, the increasing approval rate of occupational diseases in the electronics industry from 2012 to 2023 appears to reflect changes in how causal relationships and occupational health policies have been implemented and this is likely due to stakeholder involvement and relevant legal decisions.

Objective: We evaluated the occupational exposure levels of healthcare workers while conducting rotational pressurized intraperitoneal aerosol chemotherapy (RIPAC) using cisplatin in a large animal model. Methods: We performed RIPAC using cisplatin in 6 female pigs and collected surface and air samples during the procedure. Surface samples were obtained from RIPAC devices and personal protective equipment (PPE) by wiping, and air samples were collected around the operating table.All samples were analyzed by inductively coupled plasma–mass spectrometry to detect platinum. Results: Among all surface samples (n=44), platinum was detected in 41 samples (93.2%) but not in all air samples (n=16). Among samples collected from RIPAC devices (n=23), minimum and maximum cisplatin levels of 0.08 and 235.09 ng/cm2 were detected, mainly because of direct aerosol exposure in the abdominal cavity. Among samples collected from healthcare workers’ PPE (n=21), 18 samples (85.7%) showed contamination levels below the detection limit, with a maximum of 0.23 ng/cm2 . There was no significant contamination among samples collected from masks, shoes, or gloves. Conclusion During the RIPAC procedures, there is a potential risk of dermal exposure, as platinum, a surrogate material for cisplatin, was detected at low concentration levels in some surface samples. However, the respiratory exposure risk was not identified, as platinum was not detected in the airborne samples in this study.

Background: This study analyzed occupational diseases compensated through the government system in the Korean electronics industry and observed changes in the rationale for compensation. Methods: Data from the Korea Workers’ Compensation and Welfare Service (KWCWS) from 2012 to 2023 were analyzed to examine occupational disease issues in South Korea's semiconductor and display industries. Results: KWCWS received 174 occupational disease claims between 2012 and 2023, with 88 (50.6%) approved. The case of a 22-year-old semiconductor worker who died from leukemia has raised awareness and appears to be leading to more claims and higher approval rates. Cancer-related claims, particularly for breast and blood cancers, were the most common. Since 2018, the approval rate for occupational diseases has increased to 60%, which may have been influenced by the Supreme Court's Principle of Presumption of Occupational Diseases and the government’s reduction of the burden of proof. However, approval rates remain lower in small- and medium-sized enterprises (38.0%) compared to large corporations (55.6%), likely because of better documentation and unionization in the latter. The semiconductor industry had more claims and approvals than the LCD industry, primarily due to its longer operational history and greater chemical exposure. Conclusions In South Korea, the increasing approval rate of occupational diseases in the electronics industry from 2012 to 2023 appears to reflect changes in how causal relationships and occupational health policies have been implemented and this is likely due to stakeholder involvement and relevant legal decisions.

Objective: We evaluated the occupational exposure levels of healthcare workers while conducting rotational pressurized intraperitoneal aerosol chemotherapy (RIPAC) using cisplatin in a large animal model. Methods: We performed RIPAC using cisplatin in 6 female pigs and collected surface and air samples during the procedure. Surface samples were obtained from RIPAC devices and personal protective equipment (PPE) by wiping, and air samples were collected around the operating table.All samples were analyzed by inductively coupled plasma–mass spectrometry to detect platinum. Results: Among all surface samples (n=44), platinum was detected in 41 samples (93.2%) but not in all air samples (n=16). Among samples collected from RIPAC devices (n=23), minimum and maximum cisplatin levels of 0.08 and 235.09 ng/cm2 were detected, mainly because of direct aerosol exposure in the abdominal cavity. Among samples collected from healthcare workers’ PPE (n=21), 18 samples (85.7%) showed contamination levels below the detection limit, with a maximum of 0.23 ng/cm2 . There was no significant contamination among samples collected from masks, shoes, or gloves. Conclusion During the RIPAC procedures, there is a potential risk of dermal exposure, as platinum, a surrogate material for cisplatin, was detected at low concentration levels in some surface samples. However, the respiratory exposure risk was not identified, as platinum was not detected in the airborne samples in this study.

Background: This study evaluated occupational exposure levels of doxorubicin in healthcare workers performing rotational intraperitoneal pressurized aerosol chemotherapy (PIPAC) procedures. Methods: All samples were collected during PIPAC procedures applying doxorubicin to an experimental animal model (pigs). All procedures were applied to seven pigs, each for approximately 44 min. Surface samples (n = 51) were obtained from substances contaminating the PIPAC devices, surrounding objects, and protective equipment. Airborne samples were also collected around the operating table (n = 39). All samples were analyzed using ultra-high performance liquid chromatography-mass spectrometry. Results: Among the surface samples, doxorubicin was detected in only five samples (9.8%) that were directly exposed to antineoplastic drug aerosols in the abdominal cavity originating from PIPAC devices. The telescopes showed concentrations of 0.48–5.44 ng/cm2 and the trocar showed 0.98 ng/cm2 in the region where the spraying nozzles were inserted. The syringe line connector showed a maximum concentration of 181.07 ng/cm2, following a leakage. Contamination was not detected on the surgeons' gloves or shoes. Objects surrounding the operating table, including tables, operating lights, entrance doors, and trocar holders, were found to be uncontaminated. All air samples collected at locations where healthcare workers performed procedures were found to be uncontaminated. Conclusions Most air and surface samples were uncontaminated or showed very low doxorubicin concentrations during PIPAC procedures. However, there remains a potential for leakage, in which case dermal exposure may occur. Safety protocols related to leakage accidents, selection of appropriate protective equipment, and the use of disposable devices are necessary to prevent occupational exposure.

Background: There is little information about the airborne hazardous agents released during the heat treatment when manufacturing a welding material. This study aimed to evaluate the airborne hazardous agents generated at welding material manufacturing sites through area sampling. Methods: concentration of airborne particles was measured using a scanning mobility particle sizer and optical particle sizer. Total suspended particles (TSP) and respirable dust samples were collected on polyvinyl chloride filters and weighed to measure the mass concentrations. Volatile organic compounds and heavy metals were analyzed using a gas chromatography mass spectrometer and inductively coupled plasma mass spectrometer, respectively. Results: The average mass concentration of TSP was 683.1 ± 677.4 μg/m3, with respirable dust accounting for 38.6% of the TSP. The average concentration of the airborne particles less than 10 μm in diameter was 11.2–22.8 × 104 particles/cm3, and the average number of the particles with a diameter of 10–100 nm was approximately 78–86% of the total measured particles (<10 μm). In the case of volatile organic compounds, the heat treatment process concentration was significantly higher (p < 0.05) during combustion than during cooling. The airborne heavy metal concentrations differed depending on the materials used for heat treatment. The content of heavy metals in the airborne particles was approximately 32.6%. Conclusions Nanoparticle exposure increased as the number of particles in the air around the heat treatment process increases, and the ratio of heavy metals in dust generated after the heat treatment process is high, which may adversely affect workers' health.

Background: Despite the lack of official COVID-19 statistics, various workplaces and occupations have been at the center of COVID-19 outbreaks. We aimed to compare legal measures and governance established for managing COVID-19 infection risks at workplaces in nine Asia and Pacific countries and to recommend key administrative measures. Methods: We collected information on legal measures and governance from both general citizens and workers regarding infection risks such as COVID-19 from industrial hygiene professionals in nine countries (Indonesia, India, Japan, Malaysia, New Zealand, Republic of the Philippines, Republic of Korea, Taiwan, and Thailand) using a structured questionnaire. Results: A governmental body overseeing public health and welfare was in charge of containing the spread and occurrence of infectious diseases under an infectious disease control and prevention act or another special act, although the name of the pertinent organizations and legislation vary among countries. Unlike in the case of other traditional hazards, there have been no specific articles or clauses describing the means of mitigating virus risk in the workplace that are legally required of employers, making it difficult to define the responsibilities of the employer. Each country maintains own legal systems regarding access to the duration, administration, and financing of paid sick leave. Many workers may not have access to paid sick leave even if it is legally guaranteed. Conclusion Specific legal measures to manage infectious disease risks, such as providing proper personal protective equipment, education, engineering control measures, and paid sick leave are recommended to be stipulated in Industrial safety and health-related acts.

Background: Research on the status of many chemicals used in the semiconductor industry is needed. The purpose of this study was to describe the overall status of chemical use in the semiconductor industry in Korea and to examine it from a health perspective. Methods: Data on the status of chemical use and safety data sheets at 11 of 12 major semiconductor workplaces in Korea were collected. The number of chemical products and chemical constituents, quantities of chemicals, and trade secret ingredients used, as well as the health hazards were examined. Results: On average, 210 chemical products and 135 chemical constituents were used at the surveyed workplaces. Among all chemical products, 33% (range: 16–56%) contained at least one trade secret ingredient. Most of the trade secret ingredients were used in the photolithography process. Several carcinogens, including sulfuric acid, chromic acid, ethylene oxide, crystalline silica, potassium dichromate, and formaldehyde were also used. Only 29% (39 of 135) of the chemical constituents had occupational exposure limits, and more than 60% had no National Fire Protection Association health, safety, and reactivity ratings. Based on the aforementioned results, this study revealed the following. First, many chemical products and constituents are being used in the semiconductor industry and many products contained trade secret ingredients. Second, many products contained significant amounts of carcinogenic, mutagenic, and reproductive toxicant materials. Conclusion We conclude that protecting workers in the semiconductor industry against harm from chemical substances will be difficult, due to widespread use of trade secret ingredients and a lack of hazard information. The findings of the status of chemical use and the health and safety risks in semiconductor industry will contribute to epidemiological studies, safe workplace, and worker health protection.