PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Heart failure (HF) is a major cause of mortality and morbidity in South Korea, imposing substantial physical, emotional, and financial burdens on patients and society. Despite the high burden of symptom and complex care needs of HF patients, palliative care and hospice services remain underutilized in South Korea due to cultural, institutional, and knowledge-related barriers. This position statement from the Korean Society of Heart Failure emphasizes the need for integrating palliative and hospice care into HF management to improve quality of life and support holistic care for patients and their families. By clarifying the role of palliative care in HF and proposing practical referral criteria, this position statement aims to bridge the gap between HF and palliative care services in South Korea, ultimately improving patient-centered outcomes and aligning treatment with the goals and values of HF patients.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Background: This study analyzed occupational diseases compensated through the government system in the Korean electronics industry and observed changes in the rationale for compensation. Methods: Data from the Korea Workers’ Compensation and Welfare Service (KWCWS) from 2012 to 2023 were analyzed to examine occupational disease issues in South Korea's semiconductor and display industries. Results: KWCWS received 174 occupational disease claims between 2012 and 2023, with 88 (50.6%) approved. The case of a 22-year-old semiconductor worker who died from leukemia has raised awareness and appears to be leading to more claims and higher approval rates. Cancer-related claims, particularly for breast and blood cancers, were the most common. Since 2018, the approval rate for occupational diseases has increased to 60%, which may have been influenced by the Supreme Court's Principle of Presumption of Occupational Diseases and the government’s reduction of the burden of proof. However, approval rates remain lower in small- and medium-sized enterprises (38.0%) compared to large corporations (55.6%), likely because of better documentation and unionization in the latter. The semiconductor industry had more claims and approvals than the LCD industry, primarily due to its longer operational history and greater chemical exposure. Conclusions In South Korea, the increasing approval rate of occupational diseases in the electronics industry from 2012 to 2023 appears to reflect changes in how causal relationships and occupational health policies have been implemented and this is likely due to stakeholder involvement and relevant legal decisions.

Background/Aims: A poor prognostic factor for Crohn’s disease (CD) includes perianal fistulizing disease, including perianal fistula and/or perianal abscess. Currently, a tool to assess perianal symptoms in patients with CD remains nonexistent. This study aimed to develop a perianal fistulizing disease self-screening questionnaire for patients with CD. Methods: This prospective pilot study was conducted at three tertiary referral centers between January 2019 and May 2020. We formulated questions on perianal symptoms, including tenesmus, anal discharge, bleeding, pain, and heat. A 4-point Likert scale was used to rate each question. Patients with CD completed a questionnaire and underwent pelvic magnetic resonance imaging (MRI). Results: Overall, 93 patients were enrolled, with 51 (54.8%) diagnosed with perianal fistulizing disease, as determined by pelvic MRI. The Spearman correlation findings demonstrated that anal pain (p = 0.450, p < 0.001) and anal discharge (p = 0.556, p < 0.001) were the symptoms that most significantly correlated with perianal disease. For anal pain and discharge, the area under the receiver operating characteristic curve of the scores was significantly higher than that of the combined score for all five symptoms (0.855 vs. 0.794, DeLong’s test p = 0.04). For the two symptoms combined, the sensitivity, specificity, and positive predictive and negative predictive values were 88.2, 73.8, 80.4, and 83.8%, respectively, with 81.7% accuracy for detecting perianal fistulizing disease. Conclusions This study indicates that simple questions regarding anal pain and discharge can help accurately identify the presence of perianal fistulizing disease in patients with CD.

Lymphoma is an uncommon type of breast malignancy, with low prevalence. The ultrasonographic findings of breast lymphoma have been described as nonspecific. Breast lymphoma most commonly appears as a solitary hypoechoic mass on US, and usually shows hypervascularity on color Doppler US. Herein, we report an unusual case of breast lymphoma that presented as multiple bilateral hyperechoic nodules on US.

Lymphoma is an uncommon type of breast malignancy, with low prevalence. The ultrasonographic findings of breast lymphoma have been described as nonspecific. Breast lymphoma most commonly appears as a solitary hypoechoic mass on US, and usually shows hypervascularity on color Doppler US. Herein, we report an unusual case of breast lymphoma that presented as multiple bilateral hyperechoic nodules on US.