Intramuscular myxoma is a rare benign myxoid tumor that is difficult to differentiate from other benign soft tissue tumors and sarcoma, and as a result, intramuscular myxoma is commonly misdiagnosed as another type of soft tissue tumor. Accordingly, awareness of the existence of this condition is a fundamental requirement for treatment decision-making. Furthermore, although intramuscular myxoma appears grossly to be well-circumscribed, it can infiltrate adjacent soft tissue microscopically. Tumor resection is the recommended treatment, but appropriate surgical margin sizes remain controversial. To the best of our knowledge, this is the first South Korean report to be issued on the treatment of intramuscular myxoma of the foot.

Scrub typhus develops after the individual is bitten by a trombiculid mite infected with Orientia tsutsugamushi. Since it has been reported that pneumonia is frequently observed in patients with scrub typhus, we investigated whether intranasal (i.n.) vaccination with the outer membrane protein of O. tsutsugamushi (OMPOT) would induce a protective immunity against O. tsutsugamushi infection. It was particular interest that when mice were infected with O. tsutsugamushi, the bacteria disseminated into the lungs, causing pneumonia. The i.n. vaccination with OMPOT induced IgG responses in serum and bronchoalveolar lavage (BAL) fluid. The anti-O. tsutsugamushi IgA Abs in BAL fluid after the vaccination showed a high correlation of the protection against O. tsutsugamushi. The vaccination induced strong Ag-specific Th1 and Th17 responses in the both spleen and lungs. In conclusion, the current study demonstrated that i.n. vaccination with OMPOT elicited protective immunity against scrub typhus in mouse with O. tsutsugamushi infection causing subsequent pneumonia.

Vaccination has been recently attracted as one of the most successful medical treatments of the prevalence of many infectious diseases. Mucosal vaccination has been interested in many researchers because mucosal immune responses play part in the first line of defense against pathogens. However, mucosal vaccination should find out an efficient antigen delivery system because the antigen should be protected from degradation and clearance, it should be targeted to mucosal sites, and it should stimulate mucosal and systemic immunity. Accordingly, mucoadhesive polymeric particles among the polymeric particles have gained much attention because they can protect the antigen from degradation, prolong the residence time of the antigen at the target site, and control the release of the loaded vaccine, and results in induction of mucosal and systemic immune responses. In this review, we discuss advances in the development of several kinds of mucoadhesive polymeric particles for mucosal vaccine delivery.

The purpose of this study was to evaluate the structural characteristics of the thread length of orthodontic mini-screws and the effects of insertion and removal torques according to the formation of the cutting flute. Two types of mini-screws were made, with a thread length of 6.0 mm and a thread length of 3.3 mm. In order to examine the effect of flute formation, the experiment group was divided into a miniscrew test group with flute formation and an experiment group without flute formation. To evaluate the effect of flute formation, two flutes were formed at 180°on the circumference, and at the tip of the mini screw, up to 4 mm for thread length of 6.0 mm and 2.4 mm for thread length of 3.3 mm. A biomechanical test block formed of 2 mm cortical bone and 10 mm cancellous bone was used to eliminate the influence of the difference in cortical bone thickness and bone density according to the insertion site. 1 mm diameter guide hole was drilled on the test block and the mini-screw was placed vertically. Using a 0.1 N·cm precision digital torque gauge, the maximum torque value was recorded at this time by embedding it to the top of the screw under a static load of 1.2 kg and the value when it was removed in the opposite direction. The insertion torque values for the 6.0 mm and 3.3 mm length mini screws were (29.53±1.84) N·cm and (26.84±2.15) N·cm, and the removal torque values are (14.50±1.37) N·cm and (13.15±2.89) N·cm, respectively.There were no statistically significant differences (P>0.05). The flute of 6.0 mm mini-screws had no statistically significant difference in both insertion and removal torque values and increased to (30.13±1.97) N·cm and (18.65±1.10) N·cm (P>0.05). In experiments with 3.3 mm mini-screws, the insertion and removal torque values decreased to (20.99±3.94) N·cm and (11.32±2.03) N·cm, respectively, showing a statistically significant decrease only in the insertion torque values (P<0.05). The insertion and removal torque values of the mini-screw were not significantly increased even when the screw length was doubled, and the flute formation effect was different with the screw length.

The purpose of this study was to evaluate the structural characteristics of the thread length of orthodontic mini-screws and the effects of insertion and removal torques according to the formation of the cutting flute. Two types of mini-screws were made, with a thread length of 6.0 mm and a thread length of 3.3 mm. In order to examine the effect of flute formation, the experiment group was divided into a miniscrew test group with flute formation and an experiment group without flute formation. To evaluate the effect of flute formation, two flutes were formed at 180°on the circumference, and at the tip of the mini screw, up to 4 mm for thread length of 6.0 mm and 2.4 mm for thread length of 3.3 mm. A biomechanical test block formed of 2 mm cortical bone and 10 mm cancellous bone was used to eliminate the influence of the difference in cortical bone thickness and bone density according to the insertion site. 1 mm diameter guide hole was drilled on the test block and the mini-screw was placed vertically. Using a 0.1 N·cm precision digital torque gauge, the maximum torque value was recorded at this time by embedding it to the top of the screw under a static load of 1.2 kg and the value when it was removed in the opposite direction. The insertion torque values for the 6.0 mm and 3.3 mm length mini screws were (29.53±1.84) N·cm and (26.84±2.15) N·cm, and the removal torque values are (14.50±1.37) N·cm and (13.15±2.89) N·cm, respectively.There were no statistically significant differences (P>0.05). The flute of 6.0 mm mini-screws had no statistically significant difference in both insertion and removal torque values and increased to (30.13±1.97) N·cm and (18.65±1.10) N·cm (P>0.05). In experiments with 3.3 mm mini-screws, the insertion and removal torque values decreased to (20.99±3.94) N·cm and (11.32±2.03) N·cm, respectively, showing a statistically significant decrease only in the insertion torque values (P<0.05). The insertion and removal torque values of the mini-screw were not significantly increased even when the screw length was doubled, and the flute formation effect was different with the screw length.

Vaccination has been recently attracted as one of the most successful medical treatments of the prevalence of many infectious diseases. Mucosal vaccination has been interested in many researchers because mucosal immune responses play part in the first line of defense against pathogens. However, mucosal vaccination should find out an efficient antigen delivery system because the antigen should be protected from degradation and clearance, it should be targeted to mucosal sites, and it should stimulate mucosal and systemic immunity. Accordingly, mucoadhesive polymeric particles among the polymeric particles have gained much attention because they can protect the antigen from degradation, prolong the residence time of the antigen at the target site, and control the release of the loaded vaccine, and results in induction of mucosal and systemic immune responses. In this review, we discuss advances in the development of several kinds of mucoadhesive polymeric particles for mucosal vaccine delivery.

Background: Carvedilol is one of the most effective beta-blockers in reducing ventricular tachyarrhythmias and mortality in patients with heart failure. One of the possible antiarrhythmic mechanisms of carvedilol is the suppression of store overload-induced Ca2+ release, especially for the triggered activity. Objectives: Premature ventricular complex (PVC) originating from the ventricular outflow tract (OT) is the most common form of idiopathic PVC, and its main mechanism is related to triggered activity. We evaluate the efficacy of carvedilol to suppress the OT PVC. Methods: The electronic medical records at our hospital were screened to identify OT PVC patients treated with carvedilol. Clinical, electrocardiographic, and Holter monitoring studies were reviewed. Results: A total of 25 patients who underwent Holter monitoring before and after carvedilol administration were found and enrolled. The mean age of the patients was 54.9 ± 13.9 years, and the mean dose of carvedilol was 18.2 ± 10.2 mg (sustained release formulation, 8/16/32 mg). The 24-h burden of PVC in 18 (72%) of 25 patients was significantly reduced from 12.2 ± 9.7% to 4.4 ± 6.7% (P = 0.006). In seven patients, the burden of PVC was changed from 7.1 ± 6.1% to 9.8 ± 8.4% (P = 0.061). There was no difference in age, carvedilol dose, duration of treatment, ventricular function, and left atrial size between responding and non-responding groups. Conclusion In this retrospective pilot study, treatment with carvedilol showed PVC suppression in 72% of patients. Now, we are conducting a prospective, randomized, multicenter study to evaluate the effect of carvedilol on OT PVC (Clinical trial registration: FOREVER trial, Clinical-Trials.gov: NCT03587558).

In this study, for better understanding of patient-derived xenograft (PDX) generation, angiogenic characteristics during PDX cancerous tissue generation was investigated with different initial cell seeding conditions in the hydrogel. We monitored the angiogenic changes during the formation of in vivo cancer cell line xenografts induced by endothelial cells. Our in vivo cancer tissue formation system was designed with the assistance of tissue engineering technology to mimic patient-derived xenograft formation. Endothelial cells and MIA PaCa-2 pancreatic carcinoma cells were encapsulated in fibrin gel at different mixing configurations and subcutaneously implanted into nude mice. To investigate the effect of the initial cancerous cell distribution in the fibrin gel, MIA PaCa-2 cells were encapsulated as a homogeneous cell distribution or as a cell aggregate, with endothelial cells homogeneously distributed in the fibrin gel. Histological observation of the explanted tissues after different implantation periods revealed three different stages: isolated vascular tubes, leaky blood vessels, and mature cancerous tissue formation. The in vivo engineered cancerous tissues had leaky blood vessels with low expression of the vascular tight junction marker CD31. Under our experimental conditions, complex cancer-like tissue formation was most successful when tumorous cells and endothelial cells were homogeneously mixed in the fibrin gel. The present study implies that tumorous xenograft tissue formation can be achieved with a low number of initial cells and that effective vascularization conditions can be attained with a limited volume of patient-derived cancer tissue. Endothelial cell-assisted vascularization can be a potent choice for the effective development of vascularized cancerous tissues for studying patient-derived xenografts, cancer angiogenesis, cancer metastasis, and anticancer drugs.
Animals ; Blood Vessels ; Cell Line ; Endothelial Cells ; Fibrin ; Heterografts* ; Hydrogel ; Mice ; Mice, Nude ; Neoplasm Metastasis ; Pancreatic Neoplasms* ; Tight Junctions ; Tissue Engineering

BACKGROUND/AIMS: To investigate the predictive factors for improvement of atrophic gastritis (AG) and intestinal metaplasia (IM). MATERIALS AND METHODS: A total of 778 subjects were prospectively enrolled and followed up for 10 years. Histological analysis of AG and IM was performed by using the updated Sydney system. To find the predictive factors for reversibility of AG and IM, 24 factors including genetic polymorphisms and bacterial and environmental factors were analyzed. RESULTS: In all subjects, the predictive factor by multivariate analysis for improvement of both antral and corpus AG was successful eradication. The predictive factors for improvement of antral IM were age and successful eradication. The predictive factor for improvement of corpus IM was successful eradication. In patients with Helicobacter pylori infection, age and cagA were predictive factors for improvement of AG and IM. In patients with H. pylori eradication, monthly income and cagA were predictive factors for improvement of AG and IM. CONCLUSIONS: H. pylori eradication is an important predictive factor of regression of AG and IM and would be beneficial for the prevention of intestinal-type gastric cancer. Young age, high income, and cagA are additional predictive factors for improving AG and IM status. Thus, various factors affect the improvement of AG and IM.
Clinical Study ; Gastritis, Atrophic ; Helicobacter pylori ; Humans ; Metaplasia ; Multivariate Analysis ; Polymorphism, Genetic ; Prospective Studies ; Stomach Neoplasms

Middle East respiratory syndrome coronavirus (MERS-CoV) causes severe cases of human respiratory disease. The current outbreak of infection with this virus in South Korea, which began on May 20, 2015, has infected 186 patients and caused 36 deaths within 2 months. In this study, to investigate the viral pathogen causing acute respiratory infections, multiplex/RT-PCR was performed on were obtained from nucleic acid of the Middle East Respiratory Syndrome-negative subjects. Viruses and atypical bacteria were detected in 39 of 337 (11.6%). Frequent viruses were human rhinovirus (n=11, 3.3%), human metapneumovirus (n=9, 2.7%), parainfluenza (n=9, 2.7%) and adenovirus (n=4, 1.2%). Mycoplasma pneumonia (M. pneumonia) was detected in 1.8 % (n=6). Out of 9 human metapneumovirus (hMPV) positive samples, 6 samples were successfully sequenced using F gene. And M. pneumoniae was sequencing of a repetitive region of the P1 gene. Phylogenetic analysis revealed that hMPV clustered into A2b lineage (n=4), B2 lineage (n=2) and M. pneumoniae clustered into two genotypes: Type 1 (n=4), Type 2a (n=2).
Adenoviridae ; Bacteria ; Genotype ; Humans ; Korea ; Metapneumovirus ; Middle East Respiratory Syndrome Coronavirus ; Middle East* ; Paramyxoviridae Infections ; Pneumonia ; Pneumonia, Mycoplasma ; Repetitive Sequences, Nucleic Acid ; Respiratory Tract Infections ; Rhinovirus