Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Anaplastic thyroid carcinoma(ATC)is the most aggressive malignancy with poor prognosis.The pathogenesis of ATC is complex,and there is no effective treatment at present.In recent years,with the deep understanding of the genetic(such as BRAF V600E,TP53,TERT,PIK3CA mutations,etc.)and epigenetic(such as histone methylation,histone deacetylation,microRNA regulatory pathways,etc.)changes driving ATC,molecular targeted therapy has brought new hope to ATC patients.This article reviews the molecular mechanisms of ATC and the latest achievements in targeted therapy and other therapies.

Objective:To investigate the expression of HBB in anaplastic thyroid cancer(ATC)cells and its regulatory effect on proliferation,invasion,migration and apoptosis of ATC cells and its potential mechanism.Methods:The expression of HBB in thyroid cancer and paracancerous tissues was analyzed through TIMER database.The correlation between the expression of HBB and the overall survival time of thyroid cancer patients was analyzed through KM-plotter database.The expression of HBB mRNA in ATC cells was detected by RT-qPCR.The HBB knockout or overexpression plasmid was transfected into ATC cells.The expression of HBB protein was detected by Western blot.The proliferation activity was detected by CCK-8 assay.The migration and invasion ability was detected by Transwell assay.The apoptosis was detected by flow cytometry.The expression of β-catenin was detected by Western blot.Results:The expression of HBB was low in thyroid cancer,and the overall survival time of patients with high expression of HBB was high.The expression of HBB protein was down-regulated in ATC cells.Knockout of HBB increased the ability of proliferation,migration and invasion of ATC cells and the expression of β-catenin protein,and inhibited apoptosis.However,overexpression of HBB decreased the ability of proliferation,migration and invasion of ATC cells and the expression of β-catenin protein,and promoted apoptosis.Conclusions:High HBB expression is associated with higher overall survival in patients with thyroid cancer.It may inhibit the proliferation,migration and invasion of ATC cells and promote apoptosis through Wnt/β-catenin signal pathway.

Objective:To study the efficacy of closed reduction with a self-developed T-frame plus robotic navigation in the treatment of supracondylar humeral fractures of Gartland type Ⅲ in children.Methods:A retrospective study was conducted to analyze the data of 67 children with supracondylar fracture of Gartland type Ⅲ who had undergone surgery at The Fifth Hospital of Harbin from January 2023 to March 2024. There were 35 males and 32 females with an age of (5.6±1.2) years. The children were divided into 2 groups according to different surgical methods. The control group (33 cases) was treated by closed reduction and internal fixation with percutaneous K-wire and the study group (34 cases) by closed reduction with a self-developed T-frame plus robotic navigation for internal fixation with percutaneous K-wire. The operation time, anatomical reduction, intraoperative fluoroscopy frequency, intraoperative needle adjustment, Flynn score at the last follow-up and complications were compared between the 2 groups.Results:There was no significant difference in the preoperative general data between the 2 groups, indicating comparability ( P>0.05). All children were followed up for (6.3±2.5) months after surgery. There were no significant differences in operation time, Flynn score at the last follow-up or incidence of complications between the study and the control groups ( P>0.05). The rate of anatomical reduction in the study group (97.1%, 33/34) was significantly higher than that in the control group (54.5%, 18/33), and the intraoperative fluoroscopy frequency [(11.6±2.5) times] and needle adjustment (5.6±1.2) times in the study group were significantly lower than those in the control group [(37.2±2.1) times and (28.7±3.9) times] ( P<0.05). Conclusions:In the treatment of supracondylar humeral fractures of Gartland type Ⅲ in children, our self-developed T-frame can play a good role in fracture reduction and temporary fixation, avoiding iatrogenic secondary injuries caused by freguent reduction and adjustment of needle threading in the course of robotic navigation.

Objective:To explore the impact of early and late antibody-mediated rejection (AMR) on treatment options and allograft outcomes after kidney transplantation (KT).Methods:From January 2013 to December 2022, the study retrospectively enrolled 141 KT allograft recipients receiving allograft biopsy and diagnosed as AMR according to the Banff 2019 criteria. Recipients with a diagnosis of AMR within 30 days post-KT were classified into early AMR group (n=19) while the remainders assigned as late AMR group (n=122). The outcome endpoints included recipient survival rate, death-censored graft survival rate, follow-up estimated glomerular filtration rate (eGFR) and immunodominant donor-specific antibody (DSA) intensity. Wilcoxon's test was utilized for assessing the differences in eGFR and DSA intensity while Kaplan-Meier curve and Log-rank test were employed for evaluating graft survival impact. Treatment regimens for AMR were collected and categorized.Results:The median follow-up duration was 2.6(1.2, 5.2) year. No graft failure was noted in early AMR group while 44 recipients in late AMR group experienced graft failure, with 34 cases (77.2%) due to AMR progression. The 5-year death-censored graft survival rate was significantly better in early AMR group than that in late AMR group [100% vs 60.1%(50.5%, 71.6%), P=0.002]. The one-year change in eGFR for early AMR group was significantly superior to that of late AMR group [19.3(-2.6, 38.1) vs -3.3(-14.0, 5.4), P=0.001]. One-year mean fluorescent intensity (MFI) of early AMR group was 1 158(401.5, 3 126.5). It was significantly lower than that when diagnosed with early AMR [3 120.5(2 392.8, 9 340.0)] and one-year MFI of late AMR group [8 094(2 251.5, 13 560.5)] ( P=0.005, P<0.001). Early AMR group primarily received standard treatment (3/19, 15.8%) and regimens centered on rituximab and/or bortezomib (7/19, 43.8%). Late AMR group mainly received standard (16/122, 13.1%) or intensified regimens (9/122, 7.4%) and regimens focused upon rituximab and/or bortezomib (32/122, 26.2%) and MP monotherapy (21/122, 17.2%). Conclusion:The outcome for early AMR is significantly better than that for late AMR. For early AMR, early and robust immunosuppression is recommended. For late AMR, early detection and timely treatment are crucial and individualized strategies should be implemented.

Objective To investigate the serum levels of peroxisome proliferator-activated receptor-γ coactivator-1α(PGC-1α)and fibronectin type Ⅲ domain-containing protein 5(FNDC5)in patients with hypertensive cerebral hemor-rhage and their association with disease severity and prognosis.Methods A total of 80 patients with hypertensive cere-bral hemorrhage who were diagnosed and treated in our hospital from July 2019 to February 2022 were enrolled as case group,and 80 individuals undergoing physical examination were enrolled as control group.ELISA was used to measure the serum levels of PGC-1α and FNDC5,and the receiver operating characteristic(ROC)curve was used to investigate their value in predicting the prognosis of patients with hypertensive cerebral hemorrhage.The logistic regression analysis was used to investigate the influencing factors for poor prognosis in patients with hypertensive cerebral hemorrhage.Results The case group had significantly lower serum levels of PGC-1α and FNDC5 than the control group(P<0.05),and the good prognosis group also had significantly higher serum levels of PGC-1α and FNDC5 than the poor prognosis group.Disease severity,PGC-1α,and FNDC5 were influencing factors for poor prognosis in patients(P<0.05).Serum PGC-1α and FNDC5 alone or in combination had an area under the ROC curve of 0.957,0.937,and 0.985,respec-tively,in predicting poor prognosis in patients with hypertensive cerebral hemorrhage.Conclusion There are low expres-sion levels of PGC-1α and FNDC5 in patients with hypertensive cerebral hemorrhage,which are associated with the sever-ity and prognosis of patients.Both of them are independent protective factors for prognosis and have a certain application value in evaluating prognosis in clinical practice.

Background::Cerebrovascular disease (CVD) ranks among the foremost factors responsible for mortality on a global scale. The mortality patterns of CVDs and temporal trends in China need to be well-illustrated and updated.Methods::We collected mortality data on patients with CVD from Chinese Center for Disease Control and Prevention’s Disease Surveillance Points (CDC-DSP) system. The mortality of CVD in 2020 was described by age, sex, residence, and region. The temporal trend from 2013 to 2019 was evaluated using joinpoint regression, and estimated rates of decline were extrapolated until 2030 using time series models.Results::In 2019, the age-standardized mortality in China (ASMRC) per 100,000 individuals was 113.2. The ASMRC for males (137.7/10 5) and rural areas (123.0/10 5) were both higher when stratified by gender and urban/rural residence. The central region had the highest mortality (126.5/10 5), the western region had a slightly lower mortality (123.5/10 5), and the eastern region had the lowest mortality (97.3/10 5). The age-specific mortality showed an accelerated upward trend from aged 55-59 years, with maximum mortality observed in individuals over 85 years of age. The age-standardized mortality of CVD decreased by 2.43% (95% confidence interval, 1.02-3.81%) annually from 2013 to 2019. Notably, the age-specific mortality of CVD increased from 2013 to 2019 for the age group of over 85 years. In 2020, both the absolute number of CVD cases and the crude mortality of CVD have increased compared to their values in 2019. The estimated total deaths due to CVD were estimated to reach 2.3 million in 2025 and 2.4 million in 2030. Conclusion::The heightened focus on the burden of CVD among males, rural areas, the central and western of China, and individuals aged 75 years and above has emerged as a pivotal determinant in further decreasing mortalities, consequently presenting novel challenges to strategies for disease prevention and control.

Objective To explore the role of sulodexide(SDX)in neointimal hyperplasia of arteriovenous fistulas(AVFs)in chronic kidney disease(CKD)rats and its possible mechanism.Methods A total of 18 male rats(weighing 300±50 g)were randomly and equally divided into AVF group,CKD+AVF group(CKD induction followed by AVF surgery and then gavaged with normal saline for 2 months),and CKD+AVF+SDX group[treated as in the CKD+AVF group but with 8 mg/(kg·d)SDX gavage].HE staining was used to observe the degree of neointimal hyperplasia.The expression of Hippo pathway related molecules,Yes-associated protein(YAP),pYAP and connective tissue growth factor(CTGF,YAP downstream target protein,one of mesenchymal marker)was detected by immunofluorescence assay.After human umbilical vein cell fusion EAHy926 cells were treated with 0,2.5,5,10,20 or 40 μg/mL SDX for 24 h,and with 2.5 μg/mL SDXfor24,48 or 72 h,respectively,CCK-8 assay was used to measure cell survival rate.Moreover,the serum sample from CKD rat was used to treat EAHy926 cells,and then the cells were treated with SDX or YAP inhibitor verteporfin.The expression levels of YAP,pYAP,CTGF and endothelial cell marker CD31 were detected by Western blotting.Results HE staining and immunofluorescence assay showed that CKD rats had serious neointimal hyperplasia in AVFs(P＜0.05),and slightly lower expression of pYAP and enhanced expression of CTGF(P＜0.05)when compared with the rats of the AVF group.While,SDX treatment alleviated the neointimal hyperplasia of AVFs,enhanced the expression of pYAP and reduced the expression of CTGF(P＜0.05).CCK-8 assay showed that cell survival rate was decreased significantly in a dose-and time-dependent manner after SDX treatment(P＜0.05).Western blotting revealed that SDX increased the expression of pYAP and CD31 while inhibited the expression of CTGF in EAHy926 cells(P＜0.05),which was consistent with the effect of verteporfin treatment.Conclusion SDX can block YAP activation caused by CKD and attenuate neointimal hyperplasia in AVFs.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective To evaluate the accuracy and clinical application value of the fluorescence quantitative PCR melting curve meth-od for detecting fungal nucleic acid.Methods 460 suspected or confirmed patients with respiratory fungal infections were enrolled in the study.The fluorescence quantitative PCR melting curve method was used as the test method,and the fungal 26S rRNA gene nucleic acid detection kit combined with Sanger sequencing was used as the reference method.Sputum samples from each study subject were collected and detected by the test method and reference method,respectively.The Kappa value of the two methods was calculated to evaluate the consistency of the results.Results Compared with the reference method,the overall conformity rate of the test method was 92.83%(427/460).Compared with the reference method,the positive conformity rates,negative conformity rates,and overall conformity rates of the test method for detecting 8 fungi,including Candida albicans,Candida glabrata,Candida krusei,Candida trop-icalis,Candida parapsilosis,Cryptococcus neoformans,Candida guilliermondii,and Aspergillus,were 97.34%(183/188),97.06%(264/272),and 97.17%(447/460),100.00%(33/33),99.77%(426/427),and 99.78%(459/460),100.00%(16/16),99.55%(442/444),and 99.57%(458/460),98.11%(52/53),99.75%(442/444),and 99.57%(458/460),95.08%(58/61),99.50%(397/399),and 98.91%(455/460),100.00%(9/9),99.56%(449/451),and 99.57%(458/460),85.00%(17/20),99.32%(437/440),and 98.70%(454/460),and 97.59%(81/83),97.88%(369/377),and 97.83%(450/460),respectively.The Kappa values for the consistency evaluation of the two methods'detection results were both greater than 0.8.Upon retesting the inconsistent re-sults of the two methods,it was found that 53.7%(22/41)of the detection results were consistent with the test method,and the others were consistent with the reference method.Conclusion The fluorescence quantitative PCR melting curve method can simultaneously detect 8 kinds of fungi,and the detection results are highly consistent with the reference method.It has unique advantages in fungal de-tection and important clinical application value.